1# SPDX-License-Identifier: GPL-2.0 2# 3# Bus Devices 4# 5 6menu "Bus devices" 7 8config ARM_CCI 9 bool 10 11config ARM_CCI400_COMMON 12 bool 13 select ARM_CCI 14 15config ARM_CCI400_PORT_CTRL 16 bool 17 depends on ARM && OF && CPU_V7 18 select ARM_CCI400_COMMON 19 help 20 Low level power management driver for CCI400 cache coherent 21 interconnect for ARM platforms. 22 23config BRCMSTB_GISB_ARB 24 bool "Broadcom STB GISB bus arbiter" 25 depends on ARM || ARM64 || MIPS 26 default ARCH_BRCMSTB || BMIPS_GENERIC 27 help 28 Driver for the Broadcom Set Top Box System-on-a-chip internal bus 29 arbiter. This driver provides timeout and target abort error handling 30 and internal bus master decoding. 31 32config MOXTET 33 tristate "CZ.NIC Turris Mox module configuration bus" 34 depends on SPI_MASTER && OF 35 help 36 Say yes here to add support for the module configuration bus found 37 on CZ.NIC's Turris Mox. This is needed for the ability to discover 38 the order in which the modules are connected and to get/set some of 39 their settings. For example the GPIOs on Mox SFP module are 40 configured through this bus. 41 42config HISILICON_LPC 43 bool "Support for ISA I/O space on HiSilicon Hip06/7" 44 depends on ARM64 && (ARCH_HISI || COMPILE_TEST) 45 select INDIRECT_PIO 46 help 47 Driver to enable I/O access to devices attached to the Low Pin 48 Count bus on the HiSilicon Hip06/7 SoC. 49 50config IMX_WEIM 51 bool "Freescale EIM DRIVER" 52 depends on ARCH_MXC 53 help 54 Driver for i.MX WEIM controller. 55 The WEIM(Wireless External Interface Module) works like a bus. 56 You can attach many different devices on it, such as NOR, onenand. 57 58config MIPS_CDMM 59 bool "MIPS Common Device Memory Map (CDMM) Driver" 60 depends on CPU_MIPSR2 61 help 62 Driver needed for the MIPS Common Device Memory Map bus in MIPS 63 cores. This bus is for per-CPU tightly coupled devices such as the 64 Fast Debug Channel (FDC). 65 66 For this to work, either your bootloader needs to enable the CDMM 67 region at an unused physical address on the boot CPU, or else your 68 platform code needs to implement mips_cdmm_phys_base() (see 69 asm/cdmm.h). 70 71config MVEBU_MBUS 72 bool 73 depends on PLAT_ORION 74 help 75 Driver needed for the MBus configuration on Marvell EBU SoCs 76 (Kirkwood, Dove, Orion5x, MV78XX0 and Armada 370/XP). 77 78config OMAP_INTERCONNECT 79 tristate "OMAP INTERCONNECT DRIVER" 80 depends on ARCH_OMAP2PLUS 81 82 help 83 Driver to enable OMAP interconnect error handling driver. 84 85config OMAP_OCP2SCP 86 tristate "OMAP OCP2SCP DRIVER" 87 depends on ARCH_OMAP2PLUS 88 help 89 Driver to enable ocp2scp module which transforms ocp interface 90 protocol to scp protocol. In OMAP4, USB PHY is connected via 91 OCP2SCP and in OMAP5, both USB PHY and SATA PHY is connected via 92 OCP2SCP. 93 94config QCOM_EBI2 95 bool "Qualcomm External Bus Interface 2 (EBI2)" 96 depends on HAS_IOMEM 97 depends on ARCH_QCOM || COMPILE_TEST 98 default ARCH_QCOM 99 help 100 Say y here to enable support for the Qualcomm External Bus 101 Interface 2, which can be used to connect things like NAND Flash, 102 SRAM, ethernet adapters, FPGAs and LCD displays. 103 104config SIMPLE_PM_BUS 105 tristate "Simple Power-Managed Bus Driver" 106 depends on OF && PM 107 help 108 Driver for transparent busses that don't need a real driver, but 109 where the bus controller is part of a PM domain, or under the control 110 of a functional clock, and thus relies on runtime PM for managing 111 this PM domain and/or clock. 112 An example of such a bus controller is the Renesas Bus State 113 Controller (BSC, sometimes called "LBSC within Bus Bridge", or 114 "External Bus Interface") as found on several Renesas ARM SoCs. 115 116config SUN50I_DE2_BUS 117 bool "Allwinner A64 DE2 Bus Driver" 118 default ARM64 119 depends on ARCH_SUNXI 120 select SUNXI_SRAM 121 help 122 Say y here to enable support for Allwinner A64 DE2 bus driver. It's 123 mostly transparent, but a SRAM region needs to be claimed in the SRAM 124 controller to make the all blocks in the DE2 part accessible. 125 126config SUNXI_RSB 127 tristate "Allwinner sunXi Reduced Serial Bus Driver" 128 default MACH_SUN8I || MACH_SUN9I || ARM64 129 depends on ARCH_SUNXI 130 select REGMAP 131 help 132 Say y here to enable support for Allwinner's Reduced Serial Bus 133 (RSB) support. This controller is responsible for communicating 134 with various RSB based devices, such as AXP223, AXP8XX PMICs, 135 and AC100/AC200 ICs. 136 137config TEGRA_ACONNECT 138 tristate "Tegra ACONNECT Bus Driver" 139 depends on ARCH_TEGRA_210_SOC 140 depends on OF && PM 141 select PM_CLK 142 help 143 Driver for the Tegra ACONNECT bus which is used to interface with 144 the devices inside the Audio Processing Engine (APE) for Tegra210. 145 146config TEGRA_GMI 147 tristate "Tegra Generic Memory Interface bus driver" 148 depends on ARCH_TEGRA 149 help 150 Driver for the Tegra Generic Memory Interface bus which can be used 151 to attach devices such as NOR, UART, FPGA and more. 152 153config TI_SYSC 154 bool "TI sysc interconnect target module driver" 155 depends on ARCH_OMAP2PLUS 156 help 157 Generic driver for Texas Instruments interconnect target module 158 found on many TI SoCs. 159 160config TS_NBUS 161 tristate "Technologic Systems NBUS Driver" 162 depends on SOC_IMX28 163 depends on OF_GPIO && PWM 164 help 165 Driver for the Technologic Systems NBUS which is used to interface 166 with the peripherals in the FPGA of the TS-4600 SoM. 167 168config UNIPHIER_SYSTEM_BUS 169 tristate "UniPhier System Bus driver" 170 depends on ARCH_UNIPHIER && OF 171 default y 172 help 173 Support for UniPhier System Bus, a simple external bus. This is 174 needed to use on-board devices connected to UniPhier SoCs. 175 176config VEXPRESS_CONFIG 177 bool "Versatile Express configuration bus" 178 default y if ARCH_VEXPRESS 179 depends on ARM || ARM64 180 depends on OF 181 select REGMAP 182 help 183 Platform configuration infrastructure for the ARM Ltd. 184 Versatile Express. 185 186config DA8XX_MSTPRI 187 bool "TI da8xx master peripheral priority driver" 188 depends on ARCH_DAVINCI_DA8XX 189 help 190 Driver for Texas Instruments da8xx master peripheral priority 191 configuration. Allows to adjust the priorities of all master 192 peripherals. 193 194source "drivers/bus/fsl-mc/Kconfig" 195 196endmenu 197