1 /* lanai.c -- Copyright 1999-2003 by Mitchell Blank Jr <mitch@sfgoth.com> 2 * 3 * This program is free software; you can redistribute it and/or 4 * modify it under the terms of the GNU General Public License 5 * as published by the Free Software Foundation; either version 6 * 2 of the License, or (at your option) any later version. 7 * 8 * This driver supports ATM cards based on the Efficient "Lanai" 9 * chipset such as the Speedstream 3010 and the ENI-25p. The 10 * Speedstream 3060 is currently not supported since we don't 11 * have the code to drive the on-board Alcatel DSL chipset (yet). 12 * 13 * Thanks to Efficient for supporting this project with hardware, 14 * documentation, and by answering my questions. 15 * 16 * Things not working yet: 17 * 18 * o We don't support the Speedstream 3060 yet - this card has 19 * an on-board DSL modem chip by Alcatel and the driver will 20 * need some extra code added to handle it 21 * 22 * o Note that due to limitations of the Lanai only one VCC can be 23 * in CBR at once 24 * 25 * o We don't currently parse the EEPROM at all. The code is all 26 * there as per the spec, but it doesn't actually work. I think 27 * there may be some issues with the docs. Anyway, do NOT 28 * enable it yet - bugs in that code may actually damage your 29 * hardware! Because of this you should hardware an ESI before 30 * trying to use this in a LANE or MPOA environment. 31 * 32 * o AAL0 is stubbed in but the actual rx/tx path isn't written yet: 33 * vcc_tx_aal0() needs to send or queue a SKB 34 * vcc_tx_unqueue_aal0() needs to attempt to send queued SKBs 35 * vcc_rx_aal0() needs to handle AAL0 interrupts 36 * This isn't too much work - I just wanted to get other things 37 * done first. 38 * 39 * o lanai_change_qos() isn't written yet 40 * 41 * o There aren't any ioctl's yet -- I'd like to eventually support 42 * setting loopback and LED modes that way. 43 * 44 * o If the segmentation engine or DMA gets shut down we should restart 45 * card as per section 17.0i. (see lanai_reset) 46 * 47 * o setsockopt(SO_CIRANGE) isn't done (although despite what the 48 * API says it isn't exactly commonly implemented) 49 */ 50 51 /* Version history: 52 * v.1.00 -- 26-JUL-2003 -- PCI/DMA updates 53 * v.0.02 -- 11-JAN-2000 -- Endian fixes 54 * v.0.01 -- 30-NOV-1999 -- Initial release 55 */ 56 57 #include <linux/module.h> 58 #include <linux/slab.h> 59 #include <linux/mm.h> 60 #include <linux/atmdev.h> 61 #include <asm/io.h> 62 #include <asm/byteorder.h> 63 #include <linux/spinlock.h> 64 #include <linux/pci.h> 65 #include <linux/dma-mapping.h> 66 #include <linux/init.h> 67 #include <linux/delay.h> 68 #include <linux/interrupt.h> 69 70 /* -------------------- TUNABLE PARAMATERS: */ 71 72 /* 73 * Maximum number of VCIs per card. Setting it lower could theoretically 74 * save some memory, but since we allocate our vcc list with get_free_pages, 75 * it's not really likely for most architectures 76 */ 77 #define NUM_VCI (1024) 78 79 /* 80 * Enable extra debugging 81 */ 82 #define DEBUG 83 /* 84 * Debug _all_ register operations with card, except the memory test. 85 * Also disables the timed poll to prevent extra chattiness. This 86 * isn't for normal use 87 */ 88 #undef DEBUG_RW 89 90 /* 91 * The programming guide specifies a full test of the on-board SRAM 92 * at initialization time. Undefine to remove this 93 */ 94 #define FULL_MEMORY_TEST 95 96 /* 97 * This is the number of (4 byte) service entries that we will 98 * try to allocate at startup. Note that we will end up with 99 * one PAGE_SIZE's worth regardless of what this is set to 100 */ 101 #define SERVICE_ENTRIES (1024) 102 /* TODO: make above a module load-time option */ 103 104 /* 105 * We normally read the onboard EEPROM in order to discover our MAC 106 * address. Undefine to _not_ do this 107 */ 108 /* #define READ_EEPROM */ /* ***DONT ENABLE YET*** */ 109 /* TODO: make above a module load-time option (also) */ 110 111 /* 112 * Depth of TX fifo (in 128 byte units; range 2-31) 113 * Smaller numbers are better for network latency 114 * Larger numbers are better for PCI latency 115 * I'm really sure where the best tradeoff is, but the BSD driver uses 116 * 7 and it seems to work ok. 117 */ 118 #define TX_FIFO_DEPTH (7) 119 /* TODO: make above a module load-time option */ 120 121 /* 122 * How often (in jiffies) we will try to unstick stuck connections - 123 * shouldn't need to happen much 124 */ 125 #define LANAI_POLL_PERIOD (10*HZ) 126 /* TODO: make above a module load-time option */ 127 128 /* 129 * When allocating an AAL5 receiving buffer, try to make it at least 130 * large enough to hold this many max_sdu sized PDUs 131 */ 132 #define AAL5_RX_MULTIPLIER (3) 133 /* TODO: make above a module load-time option */ 134 135 /* 136 * Same for transmitting buffer 137 */ 138 #define AAL5_TX_MULTIPLIER (3) 139 /* TODO: make above a module load-time option */ 140 141 /* 142 * When allocating an AAL0 transmiting buffer, how many cells should fit. 143 * Remember we'll end up with a PAGE_SIZE of them anyway, so this isn't 144 * really critical 145 */ 146 #define AAL0_TX_MULTIPLIER (40) 147 /* TODO: make above a module load-time option */ 148 149 /* 150 * How large should we make the AAL0 receiving buffer. Remember that this 151 * is shared between all AAL0 VC's 152 */ 153 #define AAL0_RX_BUFFER_SIZE (PAGE_SIZE) 154 /* TODO: make above a module load-time option */ 155 156 /* 157 * Should we use Lanai's "powerdown" feature when no vcc's are bound? 158 */ 159 /* #define USE_POWERDOWN */ 160 /* TODO: make above a module load-time option (also) */ 161 162 /* -------------------- DEBUGGING AIDS: */ 163 164 #define DEV_LABEL "lanai" 165 166 #ifdef DEBUG 167 168 #define DPRINTK(format, args...) \ 169 printk(KERN_DEBUG DEV_LABEL ": " format, ##args) 170 #define APRINTK(truth, format, args...) \ 171 do { \ 172 if (unlikely(!(truth))) \ 173 printk(KERN_ERR DEV_LABEL ": " format, ##args); \ 174 } while (0) 175 176 #else /* !DEBUG */ 177 178 #define DPRINTK(format, args...) 179 #define APRINTK(truth, format, args...) 180 181 #endif /* DEBUG */ 182 183 #ifdef DEBUG_RW 184 #define RWDEBUG(format, args...) \ 185 printk(KERN_DEBUG DEV_LABEL ": " format, ##args) 186 #else /* !DEBUG_RW */ 187 #define RWDEBUG(format, args...) 188 #endif 189 190 /* -------------------- DATA DEFINITIONS: */ 191 192 #define LANAI_MAPPING_SIZE (0x40000) 193 #define LANAI_EEPROM_SIZE (128) 194 195 typedef int vci_t; 196 typedef void __iomem *bus_addr_t; 197 198 /* DMA buffer in host memory for TX, RX, or service list. */ 199 struct lanai_buffer { 200 u32 *start; /* From get_free_pages */ 201 u32 *end; /* One past last byte */ 202 u32 *ptr; /* Pointer to current host location */ 203 dma_addr_t dmaaddr; 204 }; 205 206 struct lanai_vcc_stats { 207 unsigned rx_nomem; 208 union { 209 struct { 210 unsigned rx_badlen; 211 unsigned service_trash; 212 unsigned service_stream; 213 unsigned service_rxcrc; 214 } aal5; 215 struct { 216 } aal0; 217 } x; 218 }; 219 220 struct lanai_dev; /* Forward declaration */ 221 222 /* 223 * This is the card-specific per-vcc data. Note that unlike some other 224 * drivers there is NOT a 1-to-1 correspondance between these and 225 * atm_vcc's - each one of these represents an actual 2-way vcc, but 226 * an atm_vcc can be 1-way and share with a 1-way vcc in the other 227 * direction. To make it weirder, there can even be 0-way vccs 228 * bound to us, waiting to do a change_qos 229 */ 230 struct lanai_vcc { 231 bus_addr_t vbase; /* Base of VCC's registers */ 232 struct lanai_vcc_stats stats; 233 int nref; /* # of atm_vcc's who reference us */ 234 vci_t vci; 235 struct { 236 struct lanai_buffer buf; 237 struct atm_vcc *atmvcc; /* atm_vcc who is receiver */ 238 } rx; 239 struct { 240 struct lanai_buffer buf; 241 struct atm_vcc *atmvcc; /* atm_vcc who is transmitter */ 242 int endptr; /* last endptr from service entry */ 243 struct sk_buff_head backlog; 244 void (*unqueue)(struct lanai_dev *, struct lanai_vcc *, int); 245 } tx; 246 }; 247 248 enum lanai_type { 249 lanai2 = PCI_DEVICE_ID_EF_ATM_LANAI2, 250 lanaihb = PCI_DEVICE_ID_EF_ATM_LANAIHB 251 }; 252 253 struct lanai_dev_stats { 254 unsigned ovfl_trash; /* # of cells dropped - buffer overflow */ 255 unsigned vci_trash; /* # of cells dropped - closed vci */ 256 unsigned hec_err; /* # of cells dropped - bad HEC */ 257 unsigned atm_ovfl; /* # of cells dropped - rx fifo overflow */ 258 unsigned pcierr_parity_detect; 259 unsigned pcierr_serr_set; 260 unsigned pcierr_master_abort; 261 unsigned pcierr_m_target_abort; 262 unsigned pcierr_s_target_abort; 263 unsigned pcierr_master_parity; 264 unsigned service_notx; 265 unsigned service_norx; 266 unsigned service_rxnotaal5; 267 unsigned dma_reenable; 268 unsigned card_reset; 269 }; 270 271 struct lanai_dev { 272 bus_addr_t base; 273 struct lanai_dev_stats stats; 274 struct lanai_buffer service; 275 struct lanai_vcc **vccs; 276 #ifdef USE_POWERDOWN 277 int nbound; /* number of bound vccs */ 278 #endif 279 enum lanai_type type; 280 vci_t num_vci; /* Currently just NUM_VCI */ 281 u8 eeprom[LANAI_EEPROM_SIZE]; 282 u32 serialno, magicno; 283 struct pci_dev *pci; 284 DECLARE_BITMAP(backlog_vccs, NUM_VCI); /* VCCs with tx backlog */ 285 DECLARE_BITMAP(transmit_ready, NUM_VCI); /* VCCs with transmit space */ 286 struct timer_list timer; 287 int naal0; 288 struct lanai_buffer aal0buf; /* AAL0 RX buffers */ 289 u32 conf1, conf2; /* CONFIG[12] registers */ 290 u32 status; /* STATUS register */ 291 spinlock_t endtxlock; 292 spinlock_t servicelock; 293 struct atm_vcc *cbrvcc; 294 int number; 295 int board_rev; 296 /* TODO - look at race conditions with maintence of conf1/conf2 */ 297 /* TODO - transmit locking: should we use _irq not _irqsave? */ 298 /* TODO - organize above in some rational fashion (see <asm/cache.h>) */ 299 }; 300 301 /* 302 * Each device has two bitmaps for each VCC (baclog_vccs and transmit_ready) 303 * This function iterates one of these, calling a given function for each 304 * vci with their bit set 305 */ 306 static void vci_bitfield_iterate(struct lanai_dev *lanai, 307 const unsigned long *lp, 308 void (*func)(struct lanai_dev *,vci_t vci)) 309 { 310 vci_t vci; 311 312 for_each_set_bit(vci, lp, NUM_VCI) 313 func(lanai, vci); 314 } 315 316 /* -------------------- BUFFER UTILITIES: */ 317 318 /* 319 * Lanai needs DMA buffers aligned to 256 bytes of at least 1024 bytes - 320 * usually any page allocation will do. Just to be safe in case 321 * PAGE_SIZE is insanely tiny, though... 322 */ 323 #define LANAI_PAGE_SIZE ((PAGE_SIZE >= 1024) ? PAGE_SIZE : 1024) 324 325 /* 326 * Allocate a buffer in host RAM for service list, RX, or TX 327 * Returns buf->start==NULL if no memory 328 * Note that the size will be rounded up 2^n bytes, and 329 * if we can't allocate that we'll settle for something smaller 330 * until minbytes 331 */ 332 static void lanai_buf_allocate(struct lanai_buffer *buf, 333 size_t bytes, size_t minbytes, struct pci_dev *pci) 334 { 335 int size; 336 337 if (bytes > (128 * 1024)) /* max lanai buffer size */ 338 bytes = 128 * 1024; 339 for (size = LANAI_PAGE_SIZE; size < bytes; size *= 2) 340 ; 341 if (minbytes < LANAI_PAGE_SIZE) 342 minbytes = LANAI_PAGE_SIZE; 343 do { 344 /* 345 * Technically we could use non-consistent mappings for 346 * everything, but the way the lanai uses DMA memory would 347 * make that a terrific pain. This is much simpler. 348 */ 349 buf->start = dma_alloc_coherent(&pci->dev, 350 size, &buf->dmaaddr, GFP_KERNEL); 351 if (buf->start != NULL) { /* Success */ 352 /* Lanai requires 256-byte alignment of DMA bufs */ 353 APRINTK((buf->dmaaddr & ~0xFFFFFF00) == 0, 354 "bad dmaaddr: 0x%lx\n", 355 (unsigned long) buf->dmaaddr); 356 buf->ptr = buf->start; 357 buf->end = (u32 *) 358 (&((unsigned char *) buf->start)[size]); 359 memset(buf->start, 0, size); 360 break; 361 } 362 size /= 2; 363 } while (size >= minbytes); 364 } 365 366 /* size of buffer in bytes */ 367 static inline size_t lanai_buf_size(const struct lanai_buffer *buf) 368 { 369 return ((unsigned long) buf->end) - ((unsigned long) buf->start); 370 } 371 372 static void lanai_buf_deallocate(struct lanai_buffer *buf, 373 struct pci_dev *pci) 374 { 375 if (buf->start != NULL) { 376 dma_free_coherent(&pci->dev, lanai_buf_size(buf), 377 buf->start, buf->dmaaddr); 378 buf->start = buf->end = buf->ptr = NULL; 379 } 380 } 381 382 /* size of buffer as "card order" (0=1k .. 7=128k) */ 383 static int lanai_buf_size_cardorder(const struct lanai_buffer *buf) 384 { 385 int order = get_order(lanai_buf_size(buf)) + (PAGE_SHIFT - 10); 386 387 /* This can only happen if PAGE_SIZE is gigantic, but just in case */ 388 if (order > 7) 389 order = 7; 390 return order; 391 } 392 393 /* -------------------- PORT I/O UTILITIES: */ 394 395 /* Registers (and their bit-fields) */ 396 enum lanai_register { 397 Reset_Reg = 0x00, /* Reset; read for chip type; bits: */ 398 #define RESET_GET_BOARD_REV(x) (((x)>> 0)&0x03) /* Board revision */ 399 #define RESET_GET_BOARD_ID(x) (((x)>> 2)&0x03) /* Board ID */ 400 #define BOARD_ID_LANAI256 (0) /* 25.6M adapter card */ 401 Endian_Reg = 0x04, /* Endian setting */ 402 IntStatus_Reg = 0x08, /* Interrupt status */ 403 IntStatusMasked_Reg = 0x0C, /* Interrupt status (masked) */ 404 IntAck_Reg = 0x10, /* Interrupt acknowledge */ 405 IntAckMasked_Reg = 0x14, /* Interrupt acknowledge (masked) */ 406 IntStatusSet_Reg = 0x18, /* Get status + enable/disable */ 407 IntStatusSetMasked_Reg = 0x1C, /* Get status + en/di (masked) */ 408 IntControlEna_Reg = 0x20, /* Interrupt control enable */ 409 IntControlDis_Reg = 0x24, /* Interrupt control disable */ 410 Status_Reg = 0x28, /* Status */ 411 #define STATUS_PROMDATA (0x00000001) /* PROM_DATA pin */ 412 #define STATUS_WAITING (0x00000002) /* Interrupt being delayed */ 413 #define STATUS_SOOL (0x00000004) /* SOOL alarm */ 414 #define STATUS_LOCD (0x00000008) /* LOCD alarm */ 415 #define STATUS_LED (0x00000010) /* LED (HAPPI) output */ 416 #define STATUS_GPIN (0x00000020) /* GPIN pin */ 417 #define STATUS_BUTTBUSY (0x00000040) /* Butt register is pending */ 418 Config1_Reg = 0x2C, /* Config word 1; bits: */ 419 #define CONFIG1_PROMDATA (0x00000001) /* PROM_DATA pin */ 420 #define CONFIG1_PROMCLK (0x00000002) /* PROM_CLK pin */ 421 #define CONFIG1_SET_READMODE(x) ((x)*0x004) /* PCI BM reads; values: */ 422 #define READMODE_PLAIN (0) /* Plain memory read */ 423 #define READMODE_LINE (2) /* Memory read line */ 424 #define READMODE_MULTIPLE (3) /* Memory read multiple */ 425 #define CONFIG1_DMA_ENABLE (0x00000010) /* Turn on DMA */ 426 #define CONFIG1_POWERDOWN (0x00000020) /* Turn off clocks */ 427 #define CONFIG1_SET_LOOPMODE(x) ((x)*0x080) /* Clock&loop mode; values: */ 428 #define LOOPMODE_NORMAL (0) /* Normal - no loop */ 429 #define LOOPMODE_TIME (1) 430 #define LOOPMODE_DIAG (2) 431 #define LOOPMODE_LINE (3) 432 #define CONFIG1_MASK_LOOPMODE (0x00000180) 433 #define CONFIG1_SET_LEDMODE(x) ((x)*0x0200) /* Mode of LED; values: */ 434 #define LEDMODE_NOT_SOOL (0) /* !SOOL */ 435 #define LEDMODE_OFF (1) /* 0 */ 436 #define LEDMODE_ON (2) /* 1 */ 437 #define LEDMODE_NOT_LOCD (3) /* !LOCD */ 438 #define LEDMORE_GPIN (4) /* GPIN */ 439 #define LEDMODE_NOT_GPIN (7) /* !GPIN */ 440 #define CONFIG1_MASK_LEDMODE (0x00000E00) 441 #define CONFIG1_GPOUT1 (0x00001000) /* Toggle for reset */ 442 #define CONFIG1_GPOUT2 (0x00002000) /* Loopback PHY */ 443 #define CONFIG1_GPOUT3 (0x00004000) /* Loopback lanai */ 444 Config2_Reg = 0x30, /* Config word 2; bits: */ 445 #define CONFIG2_HOWMANY (0x00000001) /* >512 VCIs? */ 446 #define CONFIG2_PTI7_MODE (0x00000002) /* Make PTI=7 RM, not OAM */ 447 #define CONFIG2_VPI_CHK_DIS (0x00000004) /* Ignore RX VPI value */ 448 #define CONFIG2_HEC_DROP (0x00000008) /* Drop cells w/ HEC errors */ 449 #define CONFIG2_VCI0_NORMAL (0x00000010) /* Treat VCI=0 normally */ 450 #define CONFIG2_CBR_ENABLE (0x00000020) /* Deal with CBR traffic */ 451 #define CONFIG2_TRASH_ALL (0x00000040) /* Trashing incoming cells */ 452 #define CONFIG2_TX_DISABLE (0x00000080) /* Trashing outgoing cells */ 453 #define CONFIG2_SET_TRASH (0x00000100) /* Turn trashing on */ 454 Statistics_Reg = 0x34, /* Statistics; bits: */ 455 #define STATS_GET_FIFO_OVFL(x) (((x)>> 0)&0xFF) /* FIFO overflowed */ 456 #define STATS_GET_HEC_ERR(x) (((x)>> 8)&0xFF) /* HEC was bad */ 457 #define STATS_GET_BAD_VCI(x) (((x)>>16)&0xFF) /* VCI not open */ 458 #define STATS_GET_BUF_OVFL(x) (((x)>>24)&0xFF) /* VCC buffer full */ 459 ServiceStuff_Reg = 0x38, /* Service stuff; bits: */ 460 #define SSTUFF_SET_SIZE(x) ((x)*0x20000000) /* size of service buffer */ 461 #define SSTUFF_SET_ADDR(x) ((x)>>8) /* set address of buffer */ 462 ServWrite_Reg = 0x3C, /* ServWrite Pointer */ 463 ServRead_Reg = 0x40, /* ServRead Pointer */ 464 TxDepth_Reg = 0x44, /* FIFO Transmit Depth */ 465 Butt_Reg = 0x48, /* Butt register */ 466 CBR_ICG_Reg = 0x50, 467 CBR_PTR_Reg = 0x54, 468 PingCount_Reg = 0x58, /* Ping count */ 469 DMA_Addr_Reg = 0x5C /* DMA address */ 470 }; 471 472 static inline bus_addr_t reg_addr(const struct lanai_dev *lanai, 473 enum lanai_register reg) 474 { 475 return lanai->base + reg; 476 } 477 478 static inline u32 reg_read(const struct lanai_dev *lanai, 479 enum lanai_register reg) 480 { 481 u32 t; 482 t = readl(reg_addr(lanai, reg)); 483 RWDEBUG("R [0x%08X] 0x%02X = 0x%08X\n", (unsigned int) lanai->base, 484 (int) reg, t); 485 return t; 486 } 487 488 static inline void reg_write(const struct lanai_dev *lanai, u32 val, 489 enum lanai_register reg) 490 { 491 RWDEBUG("W [0x%08X] 0x%02X < 0x%08X\n", (unsigned int) lanai->base, 492 (int) reg, val); 493 writel(val, reg_addr(lanai, reg)); 494 } 495 496 static inline void conf1_write(const struct lanai_dev *lanai) 497 { 498 reg_write(lanai, lanai->conf1, Config1_Reg); 499 } 500 501 static inline void conf2_write(const struct lanai_dev *lanai) 502 { 503 reg_write(lanai, lanai->conf2, Config2_Reg); 504 } 505 506 /* Same as conf2_write(), but defers I/O if we're powered down */ 507 static inline void conf2_write_if_powerup(const struct lanai_dev *lanai) 508 { 509 #ifdef USE_POWERDOWN 510 if (unlikely((lanai->conf1 & CONFIG1_POWERDOWN) != 0)) 511 return; 512 #endif /* USE_POWERDOWN */ 513 conf2_write(lanai); 514 } 515 516 static inline void reset_board(const struct lanai_dev *lanai) 517 { 518 DPRINTK("about to reset board\n"); 519 reg_write(lanai, 0, Reset_Reg); 520 /* 521 * If we don't delay a little while here then we can end up 522 * leaving the card in a VERY weird state and lock up the 523 * PCI bus. This isn't documented anywhere but I've convinced 524 * myself after a lot of painful experimentation 525 */ 526 udelay(5); 527 } 528 529 /* -------------------- CARD SRAM UTILITIES: */ 530 531 /* The SRAM is mapped into normal PCI memory space - the only catch is 532 * that it is only 16-bits wide but must be accessed as 32-bit. The 533 * 16 high bits will be zero. We don't hide this, since they get 534 * programmed mostly like discrete registers anyway 535 */ 536 #define SRAM_START (0x20000) 537 #define SRAM_BYTES (0x20000) /* Again, half don't really exist */ 538 539 static inline bus_addr_t sram_addr(const struct lanai_dev *lanai, int offset) 540 { 541 return lanai->base + SRAM_START + offset; 542 } 543 544 static inline u32 sram_read(const struct lanai_dev *lanai, int offset) 545 { 546 return readl(sram_addr(lanai, offset)); 547 } 548 549 static inline void sram_write(const struct lanai_dev *lanai, 550 u32 val, int offset) 551 { 552 writel(val, sram_addr(lanai, offset)); 553 } 554 555 static int sram_test_word(const struct lanai_dev *lanai, int offset, 556 u32 pattern) 557 { 558 u32 readback; 559 sram_write(lanai, pattern, offset); 560 readback = sram_read(lanai, offset); 561 if (likely(readback == pattern)) 562 return 0; 563 printk(KERN_ERR DEV_LABEL 564 "(itf %d): SRAM word at %d bad: wrote 0x%X, read 0x%X\n", 565 lanai->number, offset, 566 (unsigned int) pattern, (unsigned int) readback); 567 return -EIO; 568 } 569 570 static int sram_test_pass(const struct lanai_dev *lanai, u32 pattern) 571 { 572 int offset, result = 0; 573 for (offset = 0; offset < SRAM_BYTES && result == 0; offset += 4) 574 result = sram_test_word(lanai, offset, pattern); 575 return result; 576 } 577 578 static int sram_test_and_clear(const struct lanai_dev *lanai) 579 { 580 #ifdef FULL_MEMORY_TEST 581 int result; 582 DPRINTK("testing SRAM\n"); 583 if ((result = sram_test_pass(lanai, 0x5555)) != 0) 584 return result; 585 if ((result = sram_test_pass(lanai, 0xAAAA)) != 0) 586 return result; 587 #endif 588 DPRINTK("clearing SRAM\n"); 589 return sram_test_pass(lanai, 0x0000); 590 } 591 592 /* -------------------- CARD-BASED VCC TABLE UTILITIES: */ 593 594 /* vcc table */ 595 enum lanai_vcc_offset { 596 vcc_rxaddr1 = 0x00, /* Location1, plus bits: */ 597 #define RXADDR1_SET_SIZE(x) ((x)*0x0000100) /* size of RX buffer */ 598 #define RXADDR1_SET_RMMODE(x) ((x)*0x00800) /* RM cell action; values: */ 599 #define RMMODE_TRASH (0) /* discard */ 600 #define RMMODE_PRESERVE (1) /* input as AAL0 */ 601 #define RMMODE_PIPE (2) /* pipe to coscheduler */ 602 #define RMMODE_PIPEALL (3) /* pipe non-RM too */ 603 #define RXADDR1_OAM_PRESERVE (0x00002000) /* Input OAM cells as AAL0 */ 604 #define RXADDR1_SET_MODE(x) ((x)*0x0004000) /* Reassembly mode */ 605 #define RXMODE_TRASH (0) /* discard */ 606 #define RXMODE_AAL0 (1) /* non-AAL5 mode */ 607 #define RXMODE_AAL5 (2) /* AAL5, intr. each PDU */ 608 #define RXMODE_AAL5_STREAM (3) /* AAL5 w/o per-PDU intr */ 609 vcc_rxaddr2 = 0x04, /* Location2 */ 610 vcc_rxcrc1 = 0x08, /* RX CRC claculation space */ 611 vcc_rxcrc2 = 0x0C, 612 vcc_rxwriteptr = 0x10, /* RX writeptr, plus bits: */ 613 #define RXWRITEPTR_LASTEFCI (0x00002000) /* Last PDU had EFCI bit */ 614 #define RXWRITEPTR_DROPPING (0x00004000) /* Had error, dropping */ 615 #define RXWRITEPTR_TRASHING (0x00008000) /* Trashing */ 616 vcc_rxbufstart = 0x14, /* RX bufstart, plus bits: */ 617 #define RXBUFSTART_CLP (0x00004000) 618 #define RXBUFSTART_CI (0x00008000) 619 vcc_rxreadptr = 0x18, /* RX readptr */ 620 vcc_txicg = 0x1C, /* TX ICG */ 621 vcc_txaddr1 = 0x20, /* Location1, plus bits: */ 622 #define TXADDR1_SET_SIZE(x) ((x)*0x0000100) /* size of TX buffer */ 623 #define TXADDR1_ABR (0x00008000) /* use ABR (doesn't work) */ 624 vcc_txaddr2 = 0x24, /* Location2 */ 625 vcc_txcrc1 = 0x28, /* TX CRC claculation space */ 626 vcc_txcrc2 = 0x2C, 627 vcc_txreadptr = 0x30, /* TX Readptr, plus bits: */ 628 #define TXREADPTR_GET_PTR(x) ((x)&0x01FFF) 629 #define TXREADPTR_MASK_DELTA (0x0000E000) /* ? */ 630 vcc_txendptr = 0x34, /* TX Endptr, plus bits: */ 631 #define TXENDPTR_CLP (0x00002000) 632 #define TXENDPTR_MASK_PDUMODE (0x0000C000) /* PDU mode; values: */ 633 #define PDUMODE_AAL0 (0*0x04000) 634 #define PDUMODE_AAL5 (2*0x04000) 635 #define PDUMODE_AAL5STREAM (3*0x04000) 636 vcc_txwriteptr = 0x38, /* TX Writeptr */ 637 #define TXWRITEPTR_GET_PTR(x) ((x)&0x1FFF) 638 vcc_txcbr_next = 0x3C /* # of next CBR VCI in ring */ 639 #define TXCBR_NEXT_BOZO (0x00008000) /* "bozo bit" */ 640 }; 641 642 #define CARDVCC_SIZE (0x40) 643 644 static inline bus_addr_t cardvcc_addr(const struct lanai_dev *lanai, 645 vci_t vci) 646 { 647 return sram_addr(lanai, vci * CARDVCC_SIZE); 648 } 649 650 static inline u32 cardvcc_read(const struct lanai_vcc *lvcc, 651 enum lanai_vcc_offset offset) 652 { 653 u32 val; 654 APRINTK(lvcc->vbase != NULL, "cardvcc_read: unbound vcc!\n"); 655 val= readl(lvcc->vbase + offset); 656 RWDEBUG("VR vci=%04d 0x%02X = 0x%08X\n", 657 lvcc->vci, (int) offset, val); 658 return val; 659 } 660 661 static inline void cardvcc_write(const struct lanai_vcc *lvcc, 662 u32 val, enum lanai_vcc_offset offset) 663 { 664 APRINTK(lvcc->vbase != NULL, "cardvcc_write: unbound vcc!\n"); 665 APRINTK((val & ~0xFFFF) == 0, 666 "cardvcc_write: bad val 0x%X (vci=%d, addr=0x%02X)\n", 667 (unsigned int) val, lvcc->vci, (unsigned int) offset); 668 RWDEBUG("VW vci=%04d 0x%02X > 0x%08X\n", 669 lvcc->vci, (unsigned int) offset, (unsigned int) val); 670 writel(val, lvcc->vbase + offset); 671 } 672 673 /* -------------------- COMPUTE SIZE OF AN AAL5 PDU: */ 674 675 /* How many bytes will an AAL5 PDU take to transmit - remember that: 676 * o we need to add 8 bytes for length, CPI, UU, and CRC 677 * o we need to round up to 48 bytes for cells 678 */ 679 static inline int aal5_size(int size) 680 { 681 int cells = (size + 8 + 47) / 48; 682 return cells * 48; 683 } 684 685 /* -------------------- FREE AN ATM SKB: */ 686 687 static inline void lanai_free_skb(struct atm_vcc *atmvcc, struct sk_buff *skb) 688 { 689 if (atmvcc->pop != NULL) 690 atmvcc->pop(atmvcc, skb); 691 else 692 dev_kfree_skb_any(skb); 693 } 694 695 /* -------------------- TURN VCCS ON AND OFF: */ 696 697 static void host_vcc_start_rx(const struct lanai_vcc *lvcc) 698 { 699 u32 addr1; 700 if (lvcc->rx.atmvcc->qos.aal == ATM_AAL5) { 701 dma_addr_t dmaaddr = lvcc->rx.buf.dmaaddr; 702 cardvcc_write(lvcc, 0xFFFF, vcc_rxcrc1); 703 cardvcc_write(lvcc, 0xFFFF, vcc_rxcrc2); 704 cardvcc_write(lvcc, 0, vcc_rxwriteptr); 705 cardvcc_write(lvcc, 0, vcc_rxbufstart); 706 cardvcc_write(lvcc, 0, vcc_rxreadptr); 707 cardvcc_write(lvcc, (dmaaddr >> 16) & 0xFFFF, vcc_rxaddr2); 708 addr1 = ((dmaaddr >> 8) & 0xFF) | 709 RXADDR1_SET_SIZE(lanai_buf_size_cardorder(&lvcc->rx.buf))| 710 RXADDR1_SET_RMMODE(RMMODE_TRASH) | /* ??? */ 711 /* RXADDR1_OAM_PRESERVE | --- no OAM support yet */ 712 RXADDR1_SET_MODE(RXMODE_AAL5); 713 } else 714 addr1 = RXADDR1_SET_RMMODE(RMMODE_PRESERVE) | /* ??? */ 715 RXADDR1_OAM_PRESERVE | /* ??? */ 716 RXADDR1_SET_MODE(RXMODE_AAL0); 717 /* This one must be last! */ 718 cardvcc_write(lvcc, addr1, vcc_rxaddr1); 719 } 720 721 static void host_vcc_start_tx(const struct lanai_vcc *lvcc) 722 { 723 dma_addr_t dmaaddr = lvcc->tx.buf.dmaaddr; 724 cardvcc_write(lvcc, 0, vcc_txicg); 725 cardvcc_write(lvcc, 0xFFFF, vcc_txcrc1); 726 cardvcc_write(lvcc, 0xFFFF, vcc_txcrc2); 727 cardvcc_write(lvcc, 0, vcc_txreadptr); 728 cardvcc_write(lvcc, 0, vcc_txendptr); 729 cardvcc_write(lvcc, 0, vcc_txwriteptr); 730 cardvcc_write(lvcc, 731 (lvcc->tx.atmvcc->qos.txtp.traffic_class == ATM_CBR) ? 732 TXCBR_NEXT_BOZO | lvcc->vci : 0, vcc_txcbr_next); 733 cardvcc_write(lvcc, (dmaaddr >> 16) & 0xFFFF, vcc_txaddr2); 734 cardvcc_write(lvcc, 735 ((dmaaddr >> 8) & 0xFF) | 736 TXADDR1_SET_SIZE(lanai_buf_size_cardorder(&lvcc->tx.buf)), 737 vcc_txaddr1); 738 } 739 740 /* Shutdown receiving on card */ 741 static void lanai_shutdown_rx_vci(const struct lanai_vcc *lvcc) 742 { 743 if (lvcc->vbase == NULL) /* We were never bound to a VCI */ 744 return; 745 /* 15.1.1 - set to trashing, wait one cell time (15us) */ 746 cardvcc_write(lvcc, 747 RXADDR1_SET_RMMODE(RMMODE_TRASH) | 748 RXADDR1_SET_MODE(RXMODE_TRASH), vcc_rxaddr1); 749 udelay(15); 750 /* 15.1.2 - clear rest of entries */ 751 cardvcc_write(lvcc, 0, vcc_rxaddr2); 752 cardvcc_write(lvcc, 0, vcc_rxcrc1); 753 cardvcc_write(lvcc, 0, vcc_rxcrc2); 754 cardvcc_write(lvcc, 0, vcc_rxwriteptr); 755 cardvcc_write(lvcc, 0, vcc_rxbufstart); 756 cardvcc_write(lvcc, 0, vcc_rxreadptr); 757 } 758 759 /* Shutdown transmitting on card. 760 * Unfortunately the lanai needs us to wait until all the data 761 * drains out of the buffer before we can dealloc it, so this 762 * can take awhile -- up to 370ms for a full 128KB buffer 763 * assuming everone else is quiet. In theory the time is 764 * boundless if there's a CBR VCC holding things up. 765 */ 766 static void lanai_shutdown_tx_vci(struct lanai_dev *lanai, 767 struct lanai_vcc *lvcc) 768 { 769 struct sk_buff *skb; 770 unsigned long flags, timeout; 771 int read, write, lastread = -1; 772 APRINTK(!in_interrupt(), 773 "lanai_shutdown_tx_vci called w/o process context!\n"); 774 if (lvcc->vbase == NULL) /* We were never bound to a VCI */ 775 return; 776 /* 15.2.1 - wait for queue to drain */ 777 while ((skb = skb_dequeue(&lvcc->tx.backlog)) != NULL) 778 lanai_free_skb(lvcc->tx.atmvcc, skb); 779 read_lock_irqsave(&vcc_sklist_lock, flags); 780 __clear_bit(lvcc->vci, lanai->backlog_vccs); 781 read_unlock_irqrestore(&vcc_sklist_lock, flags); 782 /* 783 * We need to wait for the VCC to drain but don't wait forever. We 784 * give each 1K of buffer size 1/128th of a second to clear out. 785 * TODO: maybe disable CBR if we're about to timeout? 786 */ 787 timeout = jiffies + 788 (((lanai_buf_size(&lvcc->tx.buf) / 1024) * HZ) >> 7); 789 write = TXWRITEPTR_GET_PTR(cardvcc_read(lvcc, vcc_txwriteptr)); 790 for (;;) { 791 read = TXREADPTR_GET_PTR(cardvcc_read(lvcc, vcc_txreadptr)); 792 if (read == write && /* Is TX buffer empty? */ 793 (lvcc->tx.atmvcc->qos.txtp.traffic_class != ATM_CBR || 794 (cardvcc_read(lvcc, vcc_txcbr_next) & 795 TXCBR_NEXT_BOZO) == 0)) 796 break; 797 if (read != lastread) { /* Has there been any progress? */ 798 lastread = read; 799 timeout += HZ / 10; 800 } 801 if (unlikely(time_after(jiffies, timeout))) { 802 printk(KERN_ERR DEV_LABEL "(itf %d): Timed out on " 803 "backlog closing vci %d\n", 804 lvcc->tx.atmvcc->dev->number, lvcc->vci); 805 DPRINTK("read, write = %d, %d\n", read, write); 806 break; 807 } 808 msleep(40); 809 } 810 /* 15.2.2 - clear out all tx registers */ 811 cardvcc_write(lvcc, 0, vcc_txreadptr); 812 cardvcc_write(lvcc, 0, vcc_txwriteptr); 813 cardvcc_write(lvcc, 0, vcc_txendptr); 814 cardvcc_write(lvcc, 0, vcc_txcrc1); 815 cardvcc_write(lvcc, 0, vcc_txcrc2); 816 cardvcc_write(lvcc, 0, vcc_txaddr2); 817 cardvcc_write(lvcc, 0, vcc_txaddr1); 818 } 819 820 /* -------------------- MANAGING AAL0 RX BUFFER: */ 821 822 static inline int aal0_buffer_allocate(struct lanai_dev *lanai) 823 { 824 DPRINTK("aal0_buffer_allocate: allocating AAL0 RX buffer\n"); 825 lanai_buf_allocate(&lanai->aal0buf, AAL0_RX_BUFFER_SIZE, 80, 826 lanai->pci); 827 return (lanai->aal0buf.start == NULL) ? -ENOMEM : 0; 828 } 829 830 static inline void aal0_buffer_free(struct lanai_dev *lanai) 831 { 832 DPRINTK("aal0_buffer_allocate: freeing AAL0 RX buffer\n"); 833 lanai_buf_deallocate(&lanai->aal0buf, lanai->pci); 834 } 835 836 /* -------------------- EEPROM UTILITIES: */ 837 838 /* Offsets of data in the EEPROM */ 839 #define EEPROM_COPYRIGHT (0) 840 #define EEPROM_COPYRIGHT_LEN (44) 841 #define EEPROM_CHECKSUM (62) 842 #define EEPROM_CHECKSUM_REV (63) 843 #define EEPROM_MAC (64) 844 #define EEPROM_MAC_REV (70) 845 #define EEPROM_SERIAL (112) 846 #define EEPROM_SERIAL_REV (116) 847 #define EEPROM_MAGIC (120) 848 #define EEPROM_MAGIC_REV (124) 849 850 #define EEPROM_MAGIC_VALUE (0x5AB478D2) 851 852 #ifndef READ_EEPROM 853 854 /* Stub functions to use if EEPROM reading is disabled */ 855 static int eeprom_read(struct lanai_dev *lanai) 856 { 857 printk(KERN_INFO DEV_LABEL "(itf %d): *NOT* reading EEPROM\n", 858 lanai->number); 859 memset(&lanai->eeprom[EEPROM_MAC], 0, 6); 860 return 0; 861 } 862 863 static int eeprom_validate(struct lanai_dev *lanai) 864 { 865 lanai->serialno = 0; 866 lanai->magicno = EEPROM_MAGIC_VALUE; 867 return 0; 868 } 869 870 #else /* READ_EEPROM */ 871 872 static int eeprom_read(struct lanai_dev *lanai) 873 { 874 int i, address; 875 u8 data; 876 u32 tmp; 877 #define set_config1(x) do { lanai->conf1 = x; conf1_write(lanai); \ 878 } while (0) 879 #define clock_h() set_config1(lanai->conf1 | CONFIG1_PROMCLK) 880 #define clock_l() set_config1(lanai->conf1 &~ CONFIG1_PROMCLK) 881 #define data_h() set_config1(lanai->conf1 | CONFIG1_PROMDATA) 882 #define data_l() set_config1(lanai->conf1 &~ CONFIG1_PROMDATA) 883 #define pre_read() do { data_h(); clock_h(); udelay(5); } while (0) 884 #define read_pin() (reg_read(lanai, Status_Reg) & STATUS_PROMDATA) 885 #define send_stop() do { data_l(); udelay(5); clock_h(); udelay(5); \ 886 data_h(); udelay(5); } while (0) 887 /* start with both clock and data high */ 888 data_h(); clock_h(); udelay(5); 889 for (address = 0; address < LANAI_EEPROM_SIZE; address++) { 890 data = (address << 1) | 1; /* Command=read + address */ 891 /* send start bit */ 892 data_l(); udelay(5); 893 clock_l(); udelay(5); 894 for (i = 128; i != 0; i >>= 1) { /* write command out */ 895 tmp = (lanai->conf1 & ~CONFIG1_PROMDATA) | 896 ((data & i) ? CONFIG1_PROMDATA : 0); 897 if (lanai->conf1 != tmp) { 898 set_config1(tmp); 899 udelay(5); /* Let new data settle */ 900 } 901 clock_h(); udelay(5); clock_l(); udelay(5); 902 } 903 /* look for ack */ 904 data_h(); clock_h(); udelay(5); 905 if (read_pin() != 0) 906 goto error; /* No ack seen */ 907 clock_l(); udelay(5); 908 /* read back result */ 909 for (data = 0, i = 7; i >= 0; i--) { 910 data_h(); clock_h(); udelay(5); 911 data = (data << 1) | !!read_pin(); 912 clock_l(); udelay(5); 913 } 914 /* look again for ack */ 915 data_h(); clock_h(); udelay(5); 916 if (read_pin() == 0) 917 goto error; /* Spurious ack */ 918 clock_l(); udelay(5); 919 send_stop(); 920 lanai->eeprom[address] = data; 921 DPRINTK("EEPROM 0x%04X %02X\n", 922 (unsigned int) address, (unsigned int) data); 923 } 924 return 0; 925 error: 926 clock_l(); udelay(5); /* finish read */ 927 send_stop(); 928 printk(KERN_ERR DEV_LABEL "(itf %d): error reading EEPROM byte %d\n", 929 lanai->number, address); 930 return -EIO; 931 #undef set_config1 932 #undef clock_h 933 #undef clock_l 934 #undef data_h 935 #undef data_l 936 #undef pre_read 937 #undef read_pin 938 #undef send_stop 939 } 940 941 /* read a big-endian 4-byte value out of eeprom */ 942 static inline u32 eeprom_be4(const struct lanai_dev *lanai, int address) 943 { 944 return be32_to_cpup((const u32 *) &lanai->eeprom[address]); 945 } 946 947 /* Checksum/validate EEPROM contents */ 948 static int eeprom_validate(struct lanai_dev *lanai) 949 { 950 int i, s; 951 u32 v; 952 const u8 *e = lanai->eeprom; 953 #ifdef DEBUG 954 /* First, see if we can get an ASCIIZ string out of the copyright */ 955 for (i = EEPROM_COPYRIGHT; 956 i < (EEPROM_COPYRIGHT + EEPROM_COPYRIGHT_LEN); i++) 957 if (e[i] < 0x20 || e[i] > 0x7E) 958 break; 959 if ( i != EEPROM_COPYRIGHT && 960 i != EEPROM_COPYRIGHT + EEPROM_COPYRIGHT_LEN && e[i] == '\0') 961 DPRINTK("eeprom: copyright = \"%s\"\n", 962 (char *) &e[EEPROM_COPYRIGHT]); 963 else 964 DPRINTK("eeprom: copyright not found\n"); 965 #endif 966 /* Validate checksum */ 967 for (i = s = 0; i < EEPROM_CHECKSUM; i++) 968 s += e[i]; 969 s &= 0xFF; 970 if (s != e[EEPROM_CHECKSUM]) { 971 printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM checksum bad " 972 "(wanted 0x%02X, got 0x%02X)\n", lanai->number, 973 (unsigned int) s, (unsigned int) e[EEPROM_CHECKSUM]); 974 return -EIO; 975 } 976 s ^= 0xFF; 977 if (s != e[EEPROM_CHECKSUM_REV]) { 978 printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM inverse checksum " 979 "bad (wanted 0x%02X, got 0x%02X)\n", lanai->number, 980 (unsigned int) s, (unsigned int) e[EEPROM_CHECKSUM_REV]); 981 return -EIO; 982 } 983 /* Verify MAC address */ 984 for (i = 0; i < 6; i++) 985 if ((e[EEPROM_MAC + i] ^ e[EEPROM_MAC_REV + i]) != 0xFF) { 986 printk(KERN_ERR DEV_LABEL 987 "(itf %d) : EEPROM MAC addresses don't match " 988 "(0x%02X, inverse 0x%02X)\n", lanai->number, 989 (unsigned int) e[EEPROM_MAC + i], 990 (unsigned int) e[EEPROM_MAC_REV + i]); 991 return -EIO; 992 } 993 DPRINTK("eeprom: MAC address = %pM\n", &e[EEPROM_MAC]); 994 /* Verify serial number */ 995 lanai->serialno = eeprom_be4(lanai, EEPROM_SERIAL); 996 v = eeprom_be4(lanai, EEPROM_SERIAL_REV); 997 if ((lanai->serialno ^ v) != 0xFFFFFFFF) { 998 printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM serial numbers " 999 "don't match (0x%08X, inverse 0x%08X)\n", lanai->number, 1000 (unsigned int) lanai->serialno, (unsigned int) v); 1001 return -EIO; 1002 } 1003 DPRINTK("eeprom: Serial number = %d\n", (unsigned int) lanai->serialno); 1004 /* Verify magic number */ 1005 lanai->magicno = eeprom_be4(lanai, EEPROM_MAGIC); 1006 v = eeprom_be4(lanai, EEPROM_MAGIC_REV); 1007 if ((lanai->magicno ^ v) != 0xFFFFFFFF) { 1008 printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM magic numbers " 1009 "don't match (0x%08X, inverse 0x%08X)\n", lanai->number, 1010 lanai->magicno, v); 1011 return -EIO; 1012 } 1013 DPRINTK("eeprom: Magic number = 0x%08X\n", lanai->magicno); 1014 if (lanai->magicno != EEPROM_MAGIC_VALUE) 1015 printk(KERN_WARNING DEV_LABEL "(itf %d): warning - EEPROM " 1016 "magic not what expected (got 0x%08X, not 0x%08X)\n", 1017 lanai->number, (unsigned int) lanai->magicno, 1018 (unsigned int) EEPROM_MAGIC_VALUE); 1019 return 0; 1020 } 1021 1022 #endif /* READ_EEPROM */ 1023 1024 static inline const u8 *eeprom_mac(const struct lanai_dev *lanai) 1025 { 1026 return &lanai->eeprom[EEPROM_MAC]; 1027 } 1028 1029 /* -------------------- INTERRUPT HANDLING UTILITIES: */ 1030 1031 /* Interrupt types */ 1032 #define INT_STATS (0x00000002) /* Statistics counter overflow */ 1033 #define INT_SOOL (0x00000004) /* SOOL changed state */ 1034 #define INT_LOCD (0x00000008) /* LOCD changed state */ 1035 #define INT_LED (0x00000010) /* LED (HAPPI) changed state */ 1036 #define INT_GPIN (0x00000020) /* GPIN changed state */ 1037 #define INT_PING (0x00000040) /* PING_COUNT fulfilled */ 1038 #define INT_WAKE (0x00000080) /* Lanai wants bus */ 1039 #define INT_CBR0 (0x00000100) /* CBR sched hit VCI 0 */ 1040 #define INT_LOCK (0x00000200) /* Service list overflow */ 1041 #define INT_MISMATCH (0x00000400) /* TX magic list mismatch */ 1042 #define INT_AAL0_STR (0x00000800) /* Non-AAL5 buffer half filled */ 1043 #define INT_AAL0 (0x00001000) /* Non-AAL5 data available */ 1044 #define INT_SERVICE (0x00002000) /* Service list entries available */ 1045 #define INT_TABORTSENT (0x00004000) /* Target abort sent by lanai */ 1046 #define INT_TABORTBM (0x00008000) /* Abort rcv'd as bus master */ 1047 #define INT_TIMEOUTBM (0x00010000) /* No response to bus master */ 1048 #define INT_PCIPARITY (0x00020000) /* Parity error on PCI */ 1049 1050 /* Sets of the above */ 1051 #define INT_ALL (0x0003FFFE) /* All interrupts */ 1052 #define INT_STATUS (0x0000003C) /* Some status pin changed */ 1053 #define INT_DMASHUT (0x00038000) /* DMA engine got shut down */ 1054 #define INT_SEGSHUT (0x00000700) /* Segmentation got shut down */ 1055 1056 static inline u32 intr_pending(const struct lanai_dev *lanai) 1057 { 1058 return reg_read(lanai, IntStatusMasked_Reg); 1059 } 1060 1061 static inline void intr_enable(const struct lanai_dev *lanai, u32 i) 1062 { 1063 reg_write(lanai, i, IntControlEna_Reg); 1064 } 1065 1066 static inline void intr_disable(const struct lanai_dev *lanai, u32 i) 1067 { 1068 reg_write(lanai, i, IntControlDis_Reg); 1069 } 1070 1071 /* -------------------- CARD/PCI STATUS: */ 1072 1073 static void status_message(int itf, const char *name, int status) 1074 { 1075 static const char *onoff[2] = { "off to on", "on to off" }; 1076 printk(KERN_INFO DEV_LABEL "(itf %d): %s changed from %s\n", 1077 itf, name, onoff[!status]); 1078 } 1079 1080 static void lanai_check_status(struct lanai_dev *lanai) 1081 { 1082 u32 new = reg_read(lanai, Status_Reg); 1083 u32 changes = new ^ lanai->status; 1084 lanai->status = new; 1085 #define e(flag, name) \ 1086 if (changes & flag) \ 1087 status_message(lanai->number, name, new & flag) 1088 e(STATUS_SOOL, "SOOL"); 1089 e(STATUS_LOCD, "LOCD"); 1090 e(STATUS_LED, "LED"); 1091 e(STATUS_GPIN, "GPIN"); 1092 #undef e 1093 } 1094 1095 static void pcistatus_got(int itf, const char *name) 1096 { 1097 printk(KERN_INFO DEV_LABEL "(itf %d): PCI got %s error\n", itf, name); 1098 } 1099 1100 static void pcistatus_check(struct lanai_dev *lanai, int clearonly) 1101 { 1102 u16 s; 1103 int result; 1104 result = pci_read_config_word(lanai->pci, PCI_STATUS, &s); 1105 if (result != PCIBIOS_SUCCESSFUL) { 1106 printk(KERN_ERR DEV_LABEL "(itf %d): can't read PCI_STATUS: " 1107 "%d\n", lanai->number, result); 1108 return; 1109 } 1110 s &= PCI_STATUS_DETECTED_PARITY | PCI_STATUS_SIG_SYSTEM_ERROR | 1111 PCI_STATUS_REC_MASTER_ABORT | PCI_STATUS_REC_TARGET_ABORT | 1112 PCI_STATUS_SIG_TARGET_ABORT | PCI_STATUS_PARITY; 1113 if (s == 0) 1114 return; 1115 result = pci_write_config_word(lanai->pci, PCI_STATUS, s); 1116 if (result != PCIBIOS_SUCCESSFUL) 1117 printk(KERN_ERR DEV_LABEL "(itf %d): can't write PCI_STATUS: " 1118 "%d\n", lanai->number, result); 1119 if (clearonly) 1120 return; 1121 #define e(flag, name, stat) \ 1122 if (s & flag) { \ 1123 pcistatus_got(lanai->number, name); \ 1124 ++lanai->stats.pcierr_##stat; \ 1125 } 1126 e(PCI_STATUS_DETECTED_PARITY, "parity", parity_detect); 1127 e(PCI_STATUS_SIG_SYSTEM_ERROR, "signalled system", serr_set); 1128 e(PCI_STATUS_REC_MASTER_ABORT, "master", master_abort); 1129 e(PCI_STATUS_REC_TARGET_ABORT, "master target", m_target_abort); 1130 e(PCI_STATUS_SIG_TARGET_ABORT, "slave", s_target_abort); 1131 e(PCI_STATUS_PARITY, "master parity", master_parity); 1132 #undef e 1133 } 1134 1135 /* -------------------- VCC TX BUFFER UTILITIES: */ 1136 1137 /* space left in tx buffer in bytes */ 1138 static inline int vcc_tx_space(const struct lanai_vcc *lvcc, int endptr) 1139 { 1140 int r; 1141 r = endptr * 16; 1142 r -= ((unsigned long) lvcc->tx.buf.ptr) - 1143 ((unsigned long) lvcc->tx.buf.start); 1144 r -= 16; /* Leave "bubble" - if start==end it looks empty */ 1145 if (r < 0) 1146 r += lanai_buf_size(&lvcc->tx.buf); 1147 return r; 1148 } 1149 1150 /* test if VCC is currently backlogged */ 1151 static inline int vcc_is_backlogged(const struct lanai_vcc *lvcc) 1152 { 1153 return !skb_queue_empty(&lvcc->tx.backlog); 1154 } 1155 1156 /* Bit fields in the segmentation buffer descriptor */ 1157 #define DESCRIPTOR_MAGIC (0xD0000000) 1158 #define DESCRIPTOR_AAL5 (0x00008000) 1159 #define DESCRIPTOR_AAL5_STREAM (0x00004000) 1160 #define DESCRIPTOR_CLP (0x00002000) 1161 1162 /* Add 32-bit descriptor with its padding */ 1163 static inline void vcc_tx_add_aal5_descriptor(struct lanai_vcc *lvcc, 1164 u32 flags, int len) 1165 { 1166 int pos; 1167 APRINTK((((unsigned long) lvcc->tx.buf.ptr) & 15) == 0, 1168 "vcc_tx_add_aal5_descriptor: bad ptr=%p\n", lvcc->tx.buf.ptr); 1169 lvcc->tx.buf.ptr += 4; /* Hope the values REALLY don't matter */ 1170 pos = ((unsigned char *) lvcc->tx.buf.ptr) - 1171 (unsigned char *) lvcc->tx.buf.start; 1172 APRINTK((pos & ~0x0001FFF0) == 0, 1173 "vcc_tx_add_aal5_descriptor: bad pos (%d) before, vci=%d, " 1174 "start,ptr,end=%p,%p,%p\n", pos, lvcc->vci, 1175 lvcc->tx.buf.start, lvcc->tx.buf.ptr, lvcc->tx.buf.end); 1176 pos = (pos + len) & (lanai_buf_size(&lvcc->tx.buf) - 1); 1177 APRINTK((pos & ~0x0001FFF0) == 0, 1178 "vcc_tx_add_aal5_descriptor: bad pos (%d) after, vci=%d, " 1179 "start,ptr,end=%p,%p,%p\n", pos, lvcc->vci, 1180 lvcc->tx.buf.start, lvcc->tx.buf.ptr, lvcc->tx.buf.end); 1181 lvcc->tx.buf.ptr[-1] = 1182 cpu_to_le32(DESCRIPTOR_MAGIC | DESCRIPTOR_AAL5 | 1183 ((lvcc->tx.atmvcc->atm_options & ATM_ATMOPT_CLP) ? 1184 DESCRIPTOR_CLP : 0) | flags | pos >> 4); 1185 if (lvcc->tx.buf.ptr >= lvcc->tx.buf.end) 1186 lvcc->tx.buf.ptr = lvcc->tx.buf.start; 1187 } 1188 1189 /* Add 32-bit AAL5 trailer and leave room for its CRC */ 1190 static inline void vcc_tx_add_aal5_trailer(struct lanai_vcc *lvcc, 1191 int len, int cpi, int uu) 1192 { 1193 APRINTK((((unsigned long) lvcc->tx.buf.ptr) & 15) == 8, 1194 "vcc_tx_add_aal5_trailer: bad ptr=%p\n", lvcc->tx.buf.ptr); 1195 lvcc->tx.buf.ptr += 2; 1196 lvcc->tx.buf.ptr[-2] = cpu_to_be32((uu << 24) | (cpi << 16) | len); 1197 if (lvcc->tx.buf.ptr >= lvcc->tx.buf.end) 1198 lvcc->tx.buf.ptr = lvcc->tx.buf.start; 1199 } 1200 1201 static inline void vcc_tx_memcpy(struct lanai_vcc *lvcc, 1202 const unsigned char *src, int n) 1203 { 1204 unsigned char *e; 1205 int m; 1206 e = ((unsigned char *) lvcc->tx.buf.ptr) + n; 1207 m = e - (unsigned char *) lvcc->tx.buf.end; 1208 if (m < 0) 1209 m = 0; 1210 memcpy(lvcc->tx.buf.ptr, src, n - m); 1211 if (m != 0) { 1212 memcpy(lvcc->tx.buf.start, src + n - m, m); 1213 e = ((unsigned char *) lvcc->tx.buf.start) + m; 1214 } 1215 lvcc->tx.buf.ptr = (u32 *) e; 1216 } 1217 1218 static inline void vcc_tx_memzero(struct lanai_vcc *lvcc, int n) 1219 { 1220 unsigned char *e; 1221 int m; 1222 if (n == 0) 1223 return; 1224 e = ((unsigned char *) lvcc->tx.buf.ptr) + n; 1225 m = e - (unsigned char *) lvcc->tx.buf.end; 1226 if (m < 0) 1227 m = 0; 1228 memset(lvcc->tx.buf.ptr, 0, n - m); 1229 if (m != 0) { 1230 memset(lvcc->tx.buf.start, 0, m); 1231 e = ((unsigned char *) lvcc->tx.buf.start) + m; 1232 } 1233 lvcc->tx.buf.ptr = (u32 *) e; 1234 } 1235 1236 /* Update "butt" register to specify new WritePtr */ 1237 static inline void lanai_endtx(struct lanai_dev *lanai, 1238 const struct lanai_vcc *lvcc) 1239 { 1240 int i, ptr = ((unsigned char *) lvcc->tx.buf.ptr) - 1241 (unsigned char *) lvcc->tx.buf.start; 1242 APRINTK((ptr & ~0x0001FFF0) == 0, 1243 "lanai_endtx: bad ptr (%d), vci=%d, start,ptr,end=%p,%p,%p\n", 1244 ptr, lvcc->vci, lvcc->tx.buf.start, lvcc->tx.buf.ptr, 1245 lvcc->tx.buf.end); 1246 1247 /* 1248 * Since the "butt register" is a shared resounce on the card we 1249 * serialize all accesses to it through this spinlock. This is 1250 * mostly just paranoia since the register is rarely "busy" anyway 1251 * but is needed for correctness. 1252 */ 1253 spin_lock(&lanai->endtxlock); 1254 /* 1255 * We need to check if the "butt busy" bit is set before 1256 * updating the butt register. In theory this should 1257 * never happen because the ATM card is plenty fast at 1258 * updating the register. Still, we should make sure 1259 */ 1260 for (i = 0; reg_read(lanai, Status_Reg) & STATUS_BUTTBUSY; i++) { 1261 if (unlikely(i > 50)) { 1262 printk(KERN_ERR DEV_LABEL "(itf %d): butt register " 1263 "always busy!\n", lanai->number); 1264 break; 1265 } 1266 udelay(5); 1267 } 1268 /* 1269 * Before we tall the card to start work we need to be sure 100% of 1270 * the info in the service buffer has been written before we tell 1271 * the card about it 1272 */ 1273 wmb(); 1274 reg_write(lanai, (ptr << 12) | lvcc->vci, Butt_Reg); 1275 spin_unlock(&lanai->endtxlock); 1276 } 1277 1278 /* 1279 * Add one AAL5 PDU to lvcc's transmit buffer. Caller garauntees there's 1280 * space available. "pdusize" is the number of bytes the PDU will take 1281 */ 1282 static void lanai_send_one_aal5(struct lanai_dev *lanai, 1283 struct lanai_vcc *lvcc, struct sk_buff *skb, int pdusize) 1284 { 1285 int pad; 1286 APRINTK(pdusize == aal5_size(skb->len), 1287 "lanai_send_one_aal5: wrong size packet (%d != %d)\n", 1288 pdusize, aal5_size(skb->len)); 1289 vcc_tx_add_aal5_descriptor(lvcc, 0, pdusize); 1290 pad = pdusize - skb->len - 8; 1291 APRINTK(pad >= 0, "pad is negative (%d)\n", pad); 1292 APRINTK(pad < 48, "pad is too big (%d)\n", pad); 1293 vcc_tx_memcpy(lvcc, skb->data, skb->len); 1294 vcc_tx_memzero(lvcc, pad); 1295 vcc_tx_add_aal5_trailer(lvcc, skb->len, 0, 0); 1296 lanai_endtx(lanai, lvcc); 1297 lanai_free_skb(lvcc->tx.atmvcc, skb); 1298 atomic_inc(&lvcc->tx.atmvcc->stats->tx); 1299 } 1300 1301 /* Try to fill the buffer - don't call unless there is backlog */ 1302 static void vcc_tx_unqueue_aal5(struct lanai_dev *lanai, 1303 struct lanai_vcc *lvcc, int endptr) 1304 { 1305 int n; 1306 struct sk_buff *skb; 1307 int space = vcc_tx_space(lvcc, endptr); 1308 APRINTK(vcc_is_backlogged(lvcc), 1309 "vcc_tx_unqueue() called with empty backlog (vci=%d)\n", 1310 lvcc->vci); 1311 while (space >= 64) { 1312 skb = skb_dequeue(&lvcc->tx.backlog); 1313 if (skb == NULL) 1314 goto no_backlog; 1315 n = aal5_size(skb->len); 1316 if (n + 16 > space) { 1317 /* No room for this packet - put it back on queue */ 1318 skb_queue_head(&lvcc->tx.backlog, skb); 1319 return; 1320 } 1321 lanai_send_one_aal5(lanai, lvcc, skb, n); 1322 space -= n + 16; 1323 } 1324 if (!vcc_is_backlogged(lvcc)) { 1325 no_backlog: 1326 __clear_bit(lvcc->vci, lanai->backlog_vccs); 1327 } 1328 } 1329 1330 /* Given an skb that we want to transmit either send it now or queue */ 1331 static void vcc_tx_aal5(struct lanai_dev *lanai, struct lanai_vcc *lvcc, 1332 struct sk_buff *skb) 1333 { 1334 int space, n; 1335 if (vcc_is_backlogged(lvcc)) /* Already backlogged */ 1336 goto queue_it; 1337 space = vcc_tx_space(lvcc, 1338 TXREADPTR_GET_PTR(cardvcc_read(lvcc, vcc_txreadptr))); 1339 n = aal5_size(skb->len); 1340 APRINTK(n + 16 >= 64, "vcc_tx_aal5: n too small (%d)\n", n); 1341 if (space < n + 16) { /* No space for this PDU */ 1342 __set_bit(lvcc->vci, lanai->backlog_vccs); 1343 queue_it: 1344 skb_queue_tail(&lvcc->tx.backlog, skb); 1345 return; 1346 } 1347 lanai_send_one_aal5(lanai, lvcc, skb, n); 1348 } 1349 1350 static void vcc_tx_unqueue_aal0(struct lanai_dev *lanai, 1351 struct lanai_vcc *lvcc, int endptr) 1352 { 1353 printk(KERN_INFO DEV_LABEL 1354 ": vcc_tx_unqueue_aal0: not implemented\n"); 1355 } 1356 1357 static void vcc_tx_aal0(struct lanai_dev *lanai, struct lanai_vcc *lvcc, 1358 struct sk_buff *skb) 1359 { 1360 printk(KERN_INFO DEV_LABEL ": vcc_tx_aal0: not implemented\n"); 1361 /* Remember to increment lvcc->tx.atmvcc->stats->tx */ 1362 lanai_free_skb(lvcc->tx.atmvcc, skb); 1363 } 1364 1365 /* -------------------- VCC RX BUFFER UTILITIES: */ 1366 1367 /* unlike the _tx_ cousins, this doesn't update ptr */ 1368 static inline void vcc_rx_memcpy(unsigned char *dest, 1369 const struct lanai_vcc *lvcc, int n) 1370 { 1371 int m = ((const unsigned char *) lvcc->rx.buf.ptr) + n - 1372 ((const unsigned char *) (lvcc->rx.buf.end)); 1373 if (m < 0) 1374 m = 0; 1375 memcpy(dest, lvcc->rx.buf.ptr, n - m); 1376 memcpy(dest + n - m, lvcc->rx.buf.start, m); 1377 /* Make sure that these copies don't get reordered */ 1378 barrier(); 1379 } 1380 1381 /* Receive AAL5 data on a VCC with a particular endptr */ 1382 static void vcc_rx_aal5(struct lanai_vcc *lvcc, int endptr) 1383 { 1384 int size; 1385 struct sk_buff *skb; 1386 const u32 *x; 1387 u32 *end = &lvcc->rx.buf.start[endptr * 4]; 1388 int n = ((unsigned long) end) - ((unsigned long) lvcc->rx.buf.ptr); 1389 if (n < 0) 1390 n += lanai_buf_size(&lvcc->rx.buf); 1391 APRINTK(n >= 0 && n < lanai_buf_size(&lvcc->rx.buf) && !(n & 15), 1392 "vcc_rx_aal5: n out of range (%d/%Zu)\n", 1393 n, lanai_buf_size(&lvcc->rx.buf)); 1394 /* Recover the second-to-last word to get true pdu length */ 1395 if ((x = &end[-2]) < lvcc->rx.buf.start) 1396 x = &lvcc->rx.buf.end[-2]; 1397 /* 1398 * Before we actually read from the buffer, make sure the memory 1399 * changes have arrived 1400 */ 1401 rmb(); 1402 size = be32_to_cpup(x) & 0xffff; 1403 if (unlikely(n != aal5_size(size))) { 1404 /* Make sure size matches padding */ 1405 printk(KERN_INFO DEV_LABEL "(itf %d): Got bad AAL5 length " 1406 "on vci=%d - size=%d n=%d\n", 1407 lvcc->rx.atmvcc->dev->number, lvcc->vci, size, n); 1408 lvcc->stats.x.aal5.rx_badlen++; 1409 goto out; 1410 } 1411 skb = atm_alloc_charge(lvcc->rx.atmvcc, size, GFP_ATOMIC); 1412 if (unlikely(skb == NULL)) { 1413 lvcc->stats.rx_nomem++; 1414 goto out; 1415 } 1416 skb_put(skb, size); 1417 vcc_rx_memcpy(skb->data, lvcc, size); 1418 ATM_SKB(skb)->vcc = lvcc->rx.atmvcc; 1419 __net_timestamp(skb); 1420 lvcc->rx.atmvcc->push(lvcc->rx.atmvcc, skb); 1421 atomic_inc(&lvcc->rx.atmvcc->stats->rx); 1422 out: 1423 lvcc->rx.buf.ptr = end; 1424 cardvcc_write(lvcc, endptr, vcc_rxreadptr); 1425 } 1426 1427 static void vcc_rx_aal0(struct lanai_dev *lanai) 1428 { 1429 printk(KERN_INFO DEV_LABEL ": vcc_rx_aal0: not implemented\n"); 1430 /* Remember to get read_lock(&vcc_sklist_lock) while looking up VC */ 1431 /* Remember to increment lvcc->rx.atmvcc->stats->rx */ 1432 } 1433 1434 /* -------------------- MANAGING HOST-BASED VCC TABLE: */ 1435 1436 /* Decide whether to use vmalloc or get_zeroed_page for VCC table */ 1437 #if (NUM_VCI * BITS_PER_LONG) <= PAGE_SIZE 1438 #define VCCTABLE_GETFREEPAGE 1439 #else 1440 #include <linux/vmalloc.h> 1441 #endif 1442 1443 static int vcc_table_allocate(struct lanai_dev *lanai) 1444 { 1445 #ifdef VCCTABLE_GETFREEPAGE 1446 APRINTK((lanai->num_vci) * sizeof(struct lanai_vcc *) <= PAGE_SIZE, 1447 "vcc table > PAGE_SIZE!"); 1448 lanai->vccs = (struct lanai_vcc **) get_zeroed_page(GFP_KERNEL); 1449 return (lanai->vccs == NULL) ? -ENOMEM : 0; 1450 #else 1451 int bytes = (lanai->num_vci) * sizeof(struct lanai_vcc *); 1452 lanai->vccs = vzalloc(bytes); 1453 if (unlikely(lanai->vccs == NULL)) 1454 return -ENOMEM; 1455 return 0; 1456 #endif 1457 } 1458 1459 static inline void vcc_table_deallocate(const struct lanai_dev *lanai) 1460 { 1461 #ifdef VCCTABLE_GETFREEPAGE 1462 free_page((unsigned long) lanai->vccs); 1463 #else 1464 vfree(lanai->vccs); 1465 #endif 1466 } 1467 1468 /* Allocate a fresh lanai_vcc, with the appropriate things cleared */ 1469 static inline struct lanai_vcc *new_lanai_vcc(void) 1470 { 1471 struct lanai_vcc *lvcc; 1472 lvcc = kzalloc(sizeof(*lvcc), GFP_KERNEL); 1473 if (likely(lvcc != NULL)) { 1474 skb_queue_head_init(&lvcc->tx.backlog); 1475 #ifdef DEBUG 1476 lvcc->vci = -1; 1477 #endif 1478 } 1479 return lvcc; 1480 } 1481 1482 static int lanai_get_sized_buffer(struct lanai_dev *lanai, 1483 struct lanai_buffer *buf, int max_sdu, int multiplier, 1484 const char *name) 1485 { 1486 int size; 1487 if (unlikely(max_sdu < 1)) 1488 max_sdu = 1; 1489 max_sdu = aal5_size(max_sdu); 1490 size = (max_sdu + 16) * multiplier + 16; 1491 lanai_buf_allocate(buf, size, max_sdu + 32, lanai->pci); 1492 if (unlikely(buf->start == NULL)) 1493 return -ENOMEM; 1494 if (unlikely(lanai_buf_size(buf) < size)) 1495 printk(KERN_WARNING DEV_LABEL "(itf %d): wanted %d bytes " 1496 "for %s buffer, got only %Zu\n", lanai->number, size, 1497 name, lanai_buf_size(buf)); 1498 DPRINTK("Allocated %Zu byte %s buffer\n", lanai_buf_size(buf), name); 1499 return 0; 1500 } 1501 1502 /* Setup a RX buffer for a currently unbound AAL5 vci */ 1503 static inline int lanai_setup_rx_vci_aal5(struct lanai_dev *lanai, 1504 struct lanai_vcc *lvcc, const struct atm_qos *qos) 1505 { 1506 return lanai_get_sized_buffer(lanai, &lvcc->rx.buf, 1507 qos->rxtp.max_sdu, AAL5_RX_MULTIPLIER, "RX"); 1508 } 1509 1510 /* Setup a TX buffer for a currently unbound AAL5 vci */ 1511 static int lanai_setup_tx_vci(struct lanai_dev *lanai, struct lanai_vcc *lvcc, 1512 const struct atm_qos *qos) 1513 { 1514 int max_sdu, multiplier; 1515 if (qos->aal == ATM_AAL0) { 1516 lvcc->tx.unqueue = vcc_tx_unqueue_aal0; 1517 max_sdu = ATM_CELL_SIZE - 1; 1518 multiplier = AAL0_TX_MULTIPLIER; 1519 } else { 1520 lvcc->tx.unqueue = vcc_tx_unqueue_aal5; 1521 max_sdu = qos->txtp.max_sdu; 1522 multiplier = AAL5_TX_MULTIPLIER; 1523 } 1524 return lanai_get_sized_buffer(lanai, &lvcc->tx.buf, max_sdu, 1525 multiplier, "TX"); 1526 } 1527 1528 static inline void host_vcc_bind(struct lanai_dev *lanai, 1529 struct lanai_vcc *lvcc, vci_t vci) 1530 { 1531 if (lvcc->vbase != NULL) 1532 return; /* We already were bound in the other direction */ 1533 DPRINTK("Binding vci %d\n", vci); 1534 #ifdef USE_POWERDOWN 1535 if (lanai->nbound++ == 0) { 1536 DPRINTK("Coming out of powerdown\n"); 1537 lanai->conf1 &= ~CONFIG1_POWERDOWN; 1538 conf1_write(lanai); 1539 conf2_write(lanai); 1540 } 1541 #endif 1542 lvcc->vbase = cardvcc_addr(lanai, vci); 1543 lanai->vccs[lvcc->vci = vci] = lvcc; 1544 } 1545 1546 static inline void host_vcc_unbind(struct lanai_dev *lanai, 1547 struct lanai_vcc *lvcc) 1548 { 1549 if (lvcc->vbase == NULL) 1550 return; /* This vcc was never bound */ 1551 DPRINTK("Unbinding vci %d\n", lvcc->vci); 1552 lvcc->vbase = NULL; 1553 lanai->vccs[lvcc->vci] = NULL; 1554 #ifdef USE_POWERDOWN 1555 if (--lanai->nbound == 0) { 1556 DPRINTK("Going into powerdown\n"); 1557 lanai->conf1 |= CONFIG1_POWERDOWN; 1558 conf1_write(lanai); 1559 } 1560 #endif 1561 } 1562 1563 /* -------------------- RESET CARD: */ 1564 1565 static void lanai_reset(struct lanai_dev *lanai) 1566 { 1567 printk(KERN_CRIT DEV_LABEL "(itf %d): *NOT* resetting - not " 1568 "implemented\n", lanai->number); 1569 /* TODO */ 1570 /* The following is just a hack until we write the real 1571 * resetter - at least ack whatever interrupt sent us 1572 * here 1573 */ 1574 reg_write(lanai, INT_ALL, IntAck_Reg); 1575 lanai->stats.card_reset++; 1576 } 1577 1578 /* -------------------- SERVICE LIST UTILITIES: */ 1579 1580 /* 1581 * Allocate service buffer and tell card about it 1582 */ 1583 static int service_buffer_allocate(struct lanai_dev *lanai) 1584 { 1585 lanai_buf_allocate(&lanai->service, SERVICE_ENTRIES * 4, 8, 1586 lanai->pci); 1587 if (unlikely(lanai->service.start == NULL)) 1588 return -ENOMEM; 1589 DPRINTK("allocated service buffer at 0x%08lX, size %Zu(%d)\n", 1590 (unsigned long) lanai->service.start, 1591 lanai_buf_size(&lanai->service), 1592 lanai_buf_size_cardorder(&lanai->service)); 1593 /* Clear ServWrite register to be safe */ 1594 reg_write(lanai, 0, ServWrite_Reg); 1595 /* ServiceStuff register contains size and address of buffer */ 1596 reg_write(lanai, 1597 SSTUFF_SET_SIZE(lanai_buf_size_cardorder(&lanai->service)) | 1598 SSTUFF_SET_ADDR(lanai->service.dmaaddr), 1599 ServiceStuff_Reg); 1600 return 0; 1601 } 1602 1603 static inline void service_buffer_deallocate(struct lanai_dev *lanai) 1604 { 1605 lanai_buf_deallocate(&lanai->service, lanai->pci); 1606 } 1607 1608 /* Bitfields in service list */ 1609 #define SERVICE_TX (0x80000000) /* Was from transmission */ 1610 #define SERVICE_TRASH (0x40000000) /* RXed PDU was trashed */ 1611 #define SERVICE_CRCERR (0x20000000) /* RXed PDU had CRC error */ 1612 #define SERVICE_CI (0x10000000) /* RXed PDU had CI set */ 1613 #define SERVICE_CLP (0x08000000) /* RXed PDU had CLP set */ 1614 #define SERVICE_STREAM (0x04000000) /* RX Stream mode */ 1615 #define SERVICE_GET_VCI(x) (((x)>>16)&0x3FF) 1616 #define SERVICE_GET_END(x) ((x)&0x1FFF) 1617 1618 /* Handle one thing from the service list - returns true if it marked a 1619 * VCC ready for xmit 1620 */ 1621 static int handle_service(struct lanai_dev *lanai, u32 s) 1622 { 1623 vci_t vci = SERVICE_GET_VCI(s); 1624 struct lanai_vcc *lvcc; 1625 read_lock(&vcc_sklist_lock); 1626 lvcc = lanai->vccs[vci]; 1627 if (unlikely(lvcc == NULL)) { 1628 read_unlock(&vcc_sklist_lock); 1629 DPRINTK("(itf %d) got service entry 0x%X for nonexistent " 1630 "vcc %d\n", lanai->number, (unsigned int) s, vci); 1631 if (s & SERVICE_TX) 1632 lanai->stats.service_notx++; 1633 else 1634 lanai->stats.service_norx++; 1635 return 0; 1636 } 1637 if (s & SERVICE_TX) { /* segmentation interrupt */ 1638 if (unlikely(lvcc->tx.atmvcc == NULL)) { 1639 read_unlock(&vcc_sklist_lock); 1640 DPRINTK("(itf %d) got service entry 0x%X for non-TX " 1641 "vcc %d\n", lanai->number, (unsigned int) s, vci); 1642 lanai->stats.service_notx++; 1643 return 0; 1644 } 1645 __set_bit(vci, lanai->transmit_ready); 1646 lvcc->tx.endptr = SERVICE_GET_END(s); 1647 read_unlock(&vcc_sklist_lock); 1648 return 1; 1649 } 1650 if (unlikely(lvcc->rx.atmvcc == NULL)) { 1651 read_unlock(&vcc_sklist_lock); 1652 DPRINTK("(itf %d) got service entry 0x%X for non-RX " 1653 "vcc %d\n", lanai->number, (unsigned int) s, vci); 1654 lanai->stats.service_norx++; 1655 return 0; 1656 } 1657 if (unlikely(lvcc->rx.atmvcc->qos.aal != ATM_AAL5)) { 1658 read_unlock(&vcc_sklist_lock); 1659 DPRINTK("(itf %d) got RX service entry 0x%X for non-AAL5 " 1660 "vcc %d\n", lanai->number, (unsigned int) s, vci); 1661 lanai->stats.service_rxnotaal5++; 1662 atomic_inc(&lvcc->rx.atmvcc->stats->rx_err); 1663 return 0; 1664 } 1665 if (likely(!(s & (SERVICE_TRASH | SERVICE_STREAM | SERVICE_CRCERR)))) { 1666 vcc_rx_aal5(lvcc, SERVICE_GET_END(s)); 1667 read_unlock(&vcc_sklist_lock); 1668 return 0; 1669 } 1670 if (s & SERVICE_TRASH) { 1671 int bytes; 1672 read_unlock(&vcc_sklist_lock); 1673 DPRINTK("got trashed rx pdu on vci %d\n", vci); 1674 atomic_inc(&lvcc->rx.atmvcc->stats->rx_err); 1675 lvcc->stats.x.aal5.service_trash++; 1676 bytes = (SERVICE_GET_END(s) * 16) - 1677 (((unsigned long) lvcc->rx.buf.ptr) - 1678 ((unsigned long) lvcc->rx.buf.start)) + 47; 1679 if (bytes < 0) 1680 bytes += lanai_buf_size(&lvcc->rx.buf); 1681 lanai->stats.ovfl_trash += (bytes / 48); 1682 return 0; 1683 } 1684 if (s & SERVICE_STREAM) { 1685 read_unlock(&vcc_sklist_lock); 1686 atomic_inc(&lvcc->rx.atmvcc->stats->rx_err); 1687 lvcc->stats.x.aal5.service_stream++; 1688 printk(KERN_ERR DEV_LABEL "(itf %d): Got AAL5 stream " 1689 "PDU on VCI %d!\n", lanai->number, vci); 1690 lanai_reset(lanai); 1691 return 0; 1692 } 1693 DPRINTK("got rx crc error on vci %d\n", vci); 1694 atomic_inc(&lvcc->rx.atmvcc->stats->rx_err); 1695 lvcc->stats.x.aal5.service_rxcrc++; 1696 lvcc->rx.buf.ptr = &lvcc->rx.buf.start[SERVICE_GET_END(s) * 4]; 1697 cardvcc_write(lvcc, SERVICE_GET_END(s), vcc_rxreadptr); 1698 read_unlock(&vcc_sklist_lock); 1699 return 0; 1700 } 1701 1702 /* Try transmitting on all VCIs that we marked ready to serve */ 1703 static void iter_transmit(struct lanai_dev *lanai, vci_t vci) 1704 { 1705 struct lanai_vcc *lvcc = lanai->vccs[vci]; 1706 if (vcc_is_backlogged(lvcc)) 1707 lvcc->tx.unqueue(lanai, lvcc, lvcc->tx.endptr); 1708 } 1709 1710 /* Run service queue -- called from interrupt context or with 1711 * interrupts otherwise disabled and with the lanai->servicelock 1712 * lock held 1713 */ 1714 static void run_service(struct lanai_dev *lanai) 1715 { 1716 int ntx = 0; 1717 u32 wreg = reg_read(lanai, ServWrite_Reg); 1718 const u32 *end = lanai->service.start + wreg; 1719 while (lanai->service.ptr != end) { 1720 ntx += handle_service(lanai, 1721 le32_to_cpup(lanai->service.ptr++)); 1722 if (lanai->service.ptr >= lanai->service.end) 1723 lanai->service.ptr = lanai->service.start; 1724 } 1725 reg_write(lanai, wreg, ServRead_Reg); 1726 if (ntx != 0) { 1727 read_lock(&vcc_sklist_lock); 1728 vci_bitfield_iterate(lanai, lanai->transmit_ready, 1729 iter_transmit); 1730 bitmap_zero(lanai->transmit_ready, NUM_VCI); 1731 read_unlock(&vcc_sklist_lock); 1732 } 1733 } 1734 1735 /* -------------------- GATHER STATISTICS: */ 1736 1737 static void get_statistics(struct lanai_dev *lanai) 1738 { 1739 u32 statreg = reg_read(lanai, Statistics_Reg); 1740 lanai->stats.atm_ovfl += STATS_GET_FIFO_OVFL(statreg); 1741 lanai->stats.hec_err += STATS_GET_HEC_ERR(statreg); 1742 lanai->stats.vci_trash += STATS_GET_BAD_VCI(statreg); 1743 lanai->stats.ovfl_trash += STATS_GET_BUF_OVFL(statreg); 1744 } 1745 1746 /* -------------------- POLLING TIMER: */ 1747 1748 #ifndef DEBUG_RW 1749 /* Try to undequeue 1 backlogged vcc */ 1750 static void iter_dequeue(struct lanai_dev *lanai, vci_t vci) 1751 { 1752 struct lanai_vcc *lvcc = lanai->vccs[vci]; 1753 int endptr; 1754 if (lvcc == NULL || lvcc->tx.atmvcc == NULL || 1755 !vcc_is_backlogged(lvcc)) { 1756 __clear_bit(vci, lanai->backlog_vccs); 1757 return; 1758 } 1759 endptr = TXREADPTR_GET_PTR(cardvcc_read(lvcc, vcc_txreadptr)); 1760 lvcc->tx.unqueue(lanai, lvcc, endptr); 1761 } 1762 #endif /* !DEBUG_RW */ 1763 1764 static void lanai_timed_poll(unsigned long arg) 1765 { 1766 struct lanai_dev *lanai = (struct lanai_dev *) arg; 1767 #ifndef DEBUG_RW 1768 unsigned long flags; 1769 #ifdef USE_POWERDOWN 1770 if (lanai->conf1 & CONFIG1_POWERDOWN) 1771 return; 1772 #endif /* USE_POWERDOWN */ 1773 local_irq_save(flags); 1774 /* If we can grab the spinlock, check if any services need to be run */ 1775 if (spin_trylock(&lanai->servicelock)) { 1776 run_service(lanai); 1777 spin_unlock(&lanai->servicelock); 1778 } 1779 /* ...and see if any backlogged VCs can make progress */ 1780 /* unfortunately linux has no read_trylock() currently */ 1781 read_lock(&vcc_sklist_lock); 1782 vci_bitfield_iterate(lanai, lanai->backlog_vccs, iter_dequeue); 1783 read_unlock(&vcc_sklist_lock); 1784 local_irq_restore(flags); 1785 1786 get_statistics(lanai); 1787 #endif /* !DEBUG_RW */ 1788 mod_timer(&lanai->timer, jiffies + LANAI_POLL_PERIOD); 1789 } 1790 1791 static inline void lanai_timed_poll_start(struct lanai_dev *lanai) 1792 { 1793 init_timer(&lanai->timer); 1794 lanai->timer.expires = jiffies + LANAI_POLL_PERIOD; 1795 lanai->timer.data = (unsigned long) lanai; 1796 lanai->timer.function = lanai_timed_poll; 1797 add_timer(&lanai->timer); 1798 } 1799 1800 static inline void lanai_timed_poll_stop(struct lanai_dev *lanai) 1801 { 1802 del_timer_sync(&lanai->timer); 1803 } 1804 1805 /* -------------------- INTERRUPT SERVICE: */ 1806 1807 static inline void lanai_int_1(struct lanai_dev *lanai, u32 reason) 1808 { 1809 u32 ack = 0; 1810 if (reason & INT_SERVICE) { 1811 ack = INT_SERVICE; 1812 spin_lock(&lanai->servicelock); 1813 run_service(lanai); 1814 spin_unlock(&lanai->servicelock); 1815 } 1816 if (reason & (INT_AAL0_STR | INT_AAL0)) { 1817 ack |= reason & (INT_AAL0_STR | INT_AAL0); 1818 vcc_rx_aal0(lanai); 1819 } 1820 /* The rest of the interrupts are pretty rare */ 1821 if (ack == reason) 1822 goto done; 1823 if (reason & INT_STATS) { 1824 reason &= ~INT_STATS; /* No need to ack */ 1825 get_statistics(lanai); 1826 } 1827 if (reason & INT_STATUS) { 1828 ack |= reason & INT_STATUS; 1829 lanai_check_status(lanai); 1830 } 1831 if (unlikely(reason & INT_DMASHUT)) { 1832 printk(KERN_ERR DEV_LABEL "(itf %d): driver error - DMA " 1833 "shutdown, reason=0x%08X, address=0x%08X\n", 1834 lanai->number, (unsigned int) (reason & INT_DMASHUT), 1835 (unsigned int) reg_read(lanai, DMA_Addr_Reg)); 1836 if (reason & INT_TABORTBM) { 1837 lanai_reset(lanai); 1838 return; 1839 } 1840 ack |= (reason & INT_DMASHUT); 1841 printk(KERN_ERR DEV_LABEL "(itf %d): re-enabling DMA\n", 1842 lanai->number); 1843 conf1_write(lanai); 1844 lanai->stats.dma_reenable++; 1845 pcistatus_check(lanai, 0); 1846 } 1847 if (unlikely(reason & INT_TABORTSENT)) { 1848 ack |= (reason & INT_TABORTSENT); 1849 printk(KERN_ERR DEV_LABEL "(itf %d): sent PCI target abort\n", 1850 lanai->number); 1851 pcistatus_check(lanai, 0); 1852 } 1853 if (unlikely(reason & INT_SEGSHUT)) { 1854 printk(KERN_ERR DEV_LABEL "(itf %d): driver error - " 1855 "segmentation shutdown, reason=0x%08X\n", lanai->number, 1856 (unsigned int) (reason & INT_SEGSHUT)); 1857 lanai_reset(lanai); 1858 return; 1859 } 1860 if (unlikely(reason & (INT_PING | INT_WAKE))) { 1861 printk(KERN_ERR DEV_LABEL "(itf %d): driver error - " 1862 "unexpected interrupt 0x%08X, resetting\n", 1863 lanai->number, 1864 (unsigned int) (reason & (INT_PING | INT_WAKE))); 1865 lanai_reset(lanai); 1866 return; 1867 } 1868 #ifdef DEBUG 1869 if (unlikely(ack != reason)) { 1870 DPRINTK("unacked ints: 0x%08X\n", 1871 (unsigned int) (reason & ~ack)); 1872 ack = reason; 1873 } 1874 #endif 1875 done: 1876 if (ack != 0) 1877 reg_write(lanai, ack, IntAck_Reg); 1878 } 1879 1880 static irqreturn_t lanai_int(int irq, void *devid) 1881 { 1882 struct lanai_dev *lanai = devid; 1883 u32 reason; 1884 1885 #ifdef USE_POWERDOWN 1886 /* 1887 * If we're powered down we shouldn't be generating any interrupts - 1888 * so assume that this is a shared interrupt line and it's for someone 1889 * else 1890 */ 1891 if (unlikely(lanai->conf1 & CONFIG1_POWERDOWN)) 1892 return IRQ_NONE; 1893 #endif 1894 1895 reason = intr_pending(lanai); 1896 if (reason == 0) 1897 return IRQ_NONE; /* Must be for someone else */ 1898 1899 do { 1900 if (unlikely(reason == 0xFFFFFFFF)) 1901 break; /* Maybe we've been unplugged? */ 1902 lanai_int_1(lanai, reason); 1903 reason = intr_pending(lanai); 1904 } while (reason != 0); 1905 1906 return IRQ_HANDLED; 1907 } 1908 1909 /* TODO - it would be nice if we could use the "delayed interrupt" system 1910 * to some advantage 1911 */ 1912 1913 /* -------------------- CHECK BOARD ID/REV: */ 1914 1915 /* 1916 * The board id and revision are stored both in the reset register and 1917 * in the PCI configuration space - the documentation says to check 1918 * each of them. If revp!=NULL we store the revision there 1919 */ 1920 static int check_board_id_and_rev(const char *name, u32 val, int *revp) 1921 { 1922 DPRINTK("%s says board_id=%d, board_rev=%d\n", name, 1923 (int) RESET_GET_BOARD_ID(val), 1924 (int) RESET_GET_BOARD_REV(val)); 1925 if (RESET_GET_BOARD_ID(val) != BOARD_ID_LANAI256) { 1926 printk(KERN_ERR DEV_LABEL ": Found %s board-id %d -- not a " 1927 "Lanai 25.6\n", name, (int) RESET_GET_BOARD_ID(val)); 1928 return -ENODEV; 1929 } 1930 if (revp != NULL) 1931 *revp = RESET_GET_BOARD_REV(val); 1932 return 0; 1933 } 1934 1935 /* -------------------- PCI INITIALIZATION/SHUTDOWN: */ 1936 1937 static int lanai_pci_start(struct lanai_dev *lanai) 1938 { 1939 struct pci_dev *pci = lanai->pci; 1940 int result; 1941 1942 if (pci_enable_device(pci) != 0) { 1943 printk(KERN_ERR DEV_LABEL "(itf %d): can't enable " 1944 "PCI device", lanai->number); 1945 return -ENXIO; 1946 } 1947 pci_set_master(pci); 1948 if (dma_set_mask_and_coherent(&pci->dev, DMA_BIT_MASK(32)) != 0) { 1949 printk(KERN_WARNING DEV_LABEL 1950 "(itf %d): No suitable DMA available.\n", lanai->number); 1951 return -EBUSY; 1952 } 1953 result = check_board_id_and_rev("PCI", pci->subsystem_device, NULL); 1954 if (result != 0) 1955 return result; 1956 /* Set latency timer to zero as per lanai docs */ 1957 result = pci_write_config_byte(pci, PCI_LATENCY_TIMER, 0); 1958 if (result != PCIBIOS_SUCCESSFUL) { 1959 printk(KERN_ERR DEV_LABEL "(itf %d): can't write " 1960 "PCI_LATENCY_TIMER: %d\n", lanai->number, result); 1961 return -EINVAL; 1962 } 1963 pcistatus_check(lanai, 1); 1964 pcistatus_check(lanai, 0); 1965 return 0; 1966 } 1967 1968 /* -------------------- VPI/VCI ALLOCATION: */ 1969 1970 /* 1971 * We _can_ use VCI==0 for normal traffic, but only for UBR (or we'll 1972 * get a CBRZERO interrupt), and we can use it only if no one is receiving 1973 * AAL0 traffic (since they will use the same queue) - according to the 1974 * docs we shouldn't even use it for AAL0 traffic 1975 */ 1976 static inline int vci0_is_ok(struct lanai_dev *lanai, 1977 const struct atm_qos *qos) 1978 { 1979 if (qos->txtp.traffic_class == ATM_CBR || qos->aal == ATM_AAL0) 1980 return 0; 1981 if (qos->rxtp.traffic_class != ATM_NONE) { 1982 if (lanai->naal0 != 0) 1983 return 0; 1984 lanai->conf2 |= CONFIG2_VCI0_NORMAL; 1985 conf2_write_if_powerup(lanai); 1986 } 1987 return 1; 1988 } 1989 1990 /* return true if vci is currently unused, or if requested qos is 1991 * compatible 1992 */ 1993 static int vci_is_ok(struct lanai_dev *lanai, vci_t vci, 1994 const struct atm_vcc *atmvcc) 1995 { 1996 const struct atm_qos *qos = &atmvcc->qos; 1997 const struct lanai_vcc *lvcc = lanai->vccs[vci]; 1998 if (vci == 0 && !vci0_is_ok(lanai, qos)) 1999 return 0; 2000 if (unlikely(lvcc != NULL)) { 2001 if (qos->rxtp.traffic_class != ATM_NONE && 2002 lvcc->rx.atmvcc != NULL && lvcc->rx.atmvcc != atmvcc) 2003 return 0; 2004 if (qos->txtp.traffic_class != ATM_NONE && 2005 lvcc->tx.atmvcc != NULL && lvcc->tx.atmvcc != atmvcc) 2006 return 0; 2007 if (qos->txtp.traffic_class == ATM_CBR && 2008 lanai->cbrvcc != NULL && lanai->cbrvcc != atmvcc) 2009 return 0; 2010 } 2011 if (qos->aal == ATM_AAL0 && lanai->naal0 == 0 && 2012 qos->rxtp.traffic_class != ATM_NONE) { 2013 const struct lanai_vcc *vci0 = lanai->vccs[0]; 2014 if (vci0 != NULL && vci0->rx.atmvcc != NULL) 2015 return 0; 2016 lanai->conf2 &= ~CONFIG2_VCI0_NORMAL; 2017 conf2_write_if_powerup(lanai); 2018 } 2019 return 1; 2020 } 2021 2022 static int lanai_normalize_ci(struct lanai_dev *lanai, 2023 const struct atm_vcc *atmvcc, short *vpip, vci_t *vcip) 2024 { 2025 switch (*vpip) { 2026 case ATM_VPI_ANY: 2027 *vpip = 0; 2028 /* FALLTHROUGH */ 2029 case 0: 2030 break; 2031 default: 2032 return -EADDRINUSE; 2033 } 2034 switch (*vcip) { 2035 case ATM_VCI_ANY: 2036 for (*vcip = ATM_NOT_RSV_VCI; *vcip < lanai->num_vci; 2037 (*vcip)++) 2038 if (vci_is_ok(lanai, *vcip, atmvcc)) 2039 return 0; 2040 return -EADDRINUSE; 2041 default: 2042 if (*vcip >= lanai->num_vci || *vcip < 0 || 2043 !vci_is_ok(lanai, *vcip, atmvcc)) 2044 return -EADDRINUSE; 2045 } 2046 return 0; 2047 } 2048 2049 /* -------------------- MANAGE CBR: */ 2050 2051 /* 2052 * CBR ICG is stored as a fixed-point number with 4 fractional bits. 2053 * Note that storing a number greater than 2046.0 will result in 2054 * incorrect shaping 2055 */ 2056 #define CBRICG_FRAC_BITS (4) 2057 #define CBRICG_MAX (2046 << CBRICG_FRAC_BITS) 2058 2059 /* 2060 * ICG is related to PCR with the formula PCR = MAXPCR / (ICG + 1) 2061 * where MAXPCR is (according to the docs) 25600000/(54*8), 2062 * which is equal to (3125<<9)/27. 2063 * 2064 * Solving for ICG, we get: 2065 * ICG = MAXPCR/PCR - 1 2066 * ICG = (3125<<9)/(27*PCR) - 1 2067 * ICG = ((3125<<9) - (27*PCR)) / (27*PCR) 2068 * 2069 * The end result is supposed to be a fixed-point number with FRAC_BITS 2070 * bits of a fractional part, so we keep everything in the numerator 2071 * shifted by that much as we compute 2072 * 2073 */ 2074 static int pcr_to_cbricg(const struct atm_qos *qos) 2075 { 2076 int rounddown = 0; /* 1 = Round PCR down, i.e. round ICG _up_ */ 2077 int x, icg, pcr = atm_pcr_goal(&qos->txtp); 2078 if (pcr == 0) /* Use maximum bandwidth */ 2079 return 0; 2080 if (pcr < 0) { 2081 rounddown = 1; 2082 pcr = -pcr; 2083 } 2084 x = pcr * 27; 2085 icg = (3125 << (9 + CBRICG_FRAC_BITS)) - (x << CBRICG_FRAC_BITS); 2086 if (rounddown) 2087 icg += x - 1; 2088 icg /= x; 2089 if (icg > CBRICG_MAX) 2090 icg = CBRICG_MAX; 2091 DPRINTK("pcr_to_cbricg: pcr=%d rounddown=%c icg=%d\n", 2092 pcr, rounddown ? 'Y' : 'N', icg); 2093 return icg; 2094 } 2095 2096 static inline void lanai_cbr_setup(struct lanai_dev *lanai) 2097 { 2098 reg_write(lanai, pcr_to_cbricg(&lanai->cbrvcc->qos), CBR_ICG_Reg); 2099 reg_write(lanai, lanai->cbrvcc->vci, CBR_PTR_Reg); 2100 lanai->conf2 |= CONFIG2_CBR_ENABLE; 2101 conf2_write(lanai); 2102 } 2103 2104 static inline void lanai_cbr_shutdown(struct lanai_dev *lanai) 2105 { 2106 lanai->conf2 &= ~CONFIG2_CBR_ENABLE; 2107 conf2_write(lanai); 2108 } 2109 2110 /* -------------------- OPERATIONS: */ 2111 2112 /* setup a newly detected device */ 2113 static int lanai_dev_open(struct atm_dev *atmdev) 2114 { 2115 struct lanai_dev *lanai = (struct lanai_dev *) atmdev->dev_data; 2116 unsigned long raw_base; 2117 int result; 2118 2119 DPRINTK("In lanai_dev_open()\n"); 2120 /* Basic device fields */ 2121 lanai->number = atmdev->number; 2122 lanai->num_vci = NUM_VCI; 2123 bitmap_zero(lanai->backlog_vccs, NUM_VCI); 2124 bitmap_zero(lanai->transmit_ready, NUM_VCI); 2125 lanai->naal0 = 0; 2126 #ifdef USE_POWERDOWN 2127 lanai->nbound = 0; 2128 #endif 2129 lanai->cbrvcc = NULL; 2130 memset(&lanai->stats, 0, sizeof lanai->stats); 2131 spin_lock_init(&lanai->endtxlock); 2132 spin_lock_init(&lanai->servicelock); 2133 atmdev->ci_range.vpi_bits = 0; 2134 atmdev->ci_range.vci_bits = 0; 2135 while (1 << atmdev->ci_range.vci_bits < lanai->num_vci) 2136 atmdev->ci_range.vci_bits++; 2137 atmdev->link_rate = ATM_25_PCR; 2138 2139 /* 3.2: PCI initialization */ 2140 if ((result = lanai_pci_start(lanai)) != 0) 2141 goto error; 2142 raw_base = lanai->pci->resource[0].start; 2143 lanai->base = (bus_addr_t) ioremap(raw_base, LANAI_MAPPING_SIZE); 2144 if (lanai->base == NULL) { 2145 printk(KERN_ERR DEV_LABEL ": couldn't remap I/O space\n"); 2146 goto error_pci; 2147 } 2148 /* 3.3: Reset lanai and PHY */ 2149 reset_board(lanai); 2150 lanai->conf1 = reg_read(lanai, Config1_Reg); 2151 lanai->conf1 &= ~(CONFIG1_GPOUT1 | CONFIG1_POWERDOWN | 2152 CONFIG1_MASK_LEDMODE); 2153 lanai->conf1 |= CONFIG1_SET_LEDMODE(LEDMODE_NOT_SOOL); 2154 reg_write(lanai, lanai->conf1 | CONFIG1_GPOUT1, Config1_Reg); 2155 udelay(1000); 2156 conf1_write(lanai); 2157 2158 /* 2159 * 3.4: Turn on endian mode for big-endian hardware 2160 * We don't actually want to do this - the actual bit fields 2161 * in the endian register are not documented anywhere. 2162 * Instead we do the bit-flipping ourselves on big-endian 2163 * hardware. 2164 * 2165 * 3.5: get the board ID/rev by reading the reset register 2166 */ 2167 result = check_board_id_and_rev("register", 2168 reg_read(lanai, Reset_Reg), &lanai->board_rev); 2169 if (result != 0) 2170 goto error_unmap; 2171 2172 /* 3.6: read EEPROM */ 2173 if ((result = eeprom_read(lanai)) != 0) 2174 goto error_unmap; 2175 if ((result = eeprom_validate(lanai)) != 0) 2176 goto error_unmap; 2177 2178 /* 3.7: re-reset PHY, do loopback tests, setup PHY */ 2179 reg_write(lanai, lanai->conf1 | CONFIG1_GPOUT1, Config1_Reg); 2180 udelay(1000); 2181 conf1_write(lanai); 2182 /* TODO - loopback tests */ 2183 lanai->conf1 |= (CONFIG1_GPOUT2 | CONFIG1_GPOUT3 | CONFIG1_DMA_ENABLE); 2184 conf1_write(lanai); 2185 2186 /* 3.8/3.9: test and initialize card SRAM */ 2187 if ((result = sram_test_and_clear(lanai)) != 0) 2188 goto error_unmap; 2189 2190 /* 3.10: initialize lanai registers */ 2191 lanai->conf1 |= CONFIG1_DMA_ENABLE; 2192 conf1_write(lanai); 2193 if ((result = service_buffer_allocate(lanai)) != 0) 2194 goto error_unmap; 2195 if ((result = vcc_table_allocate(lanai)) != 0) 2196 goto error_service; 2197 lanai->conf2 = (lanai->num_vci >= 512 ? CONFIG2_HOWMANY : 0) | 2198 CONFIG2_HEC_DROP | /* ??? */ CONFIG2_PTI7_MODE; 2199 conf2_write(lanai); 2200 reg_write(lanai, TX_FIFO_DEPTH, TxDepth_Reg); 2201 reg_write(lanai, 0, CBR_ICG_Reg); /* CBR defaults to no limit */ 2202 if ((result = request_irq(lanai->pci->irq, lanai_int, IRQF_SHARED, 2203 DEV_LABEL, lanai)) != 0) { 2204 printk(KERN_ERR DEV_LABEL ": can't allocate interrupt\n"); 2205 goto error_vcctable; 2206 } 2207 mb(); /* Make sure that all that made it */ 2208 intr_enable(lanai, INT_ALL & ~(INT_PING | INT_WAKE)); 2209 /* 3.11: initialize loop mode (i.e. turn looping off) */ 2210 lanai->conf1 = (lanai->conf1 & ~CONFIG1_MASK_LOOPMODE) | 2211 CONFIG1_SET_LOOPMODE(LOOPMODE_NORMAL) | 2212 CONFIG1_GPOUT2 | CONFIG1_GPOUT3; 2213 conf1_write(lanai); 2214 lanai->status = reg_read(lanai, Status_Reg); 2215 /* We're now done initializing this card */ 2216 #ifdef USE_POWERDOWN 2217 lanai->conf1 |= CONFIG1_POWERDOWN; 2218 conf1_write(lanai); 2219 #endif 2220 memcpy(atmdev->esi, eeprom_mac(lanai), ESI_LEN); 2221 lanai_timed_poll_start(lanai); 2222 printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d, base=0x%lx, irq=%u " 2223 "(%pMF)\n", lanai->number, (int) lanai->pci->revision, 2224 (unsigned long) lanai->base, lanai->pci->irq, atmdev->esi); 2225 printk(KERN_NOTICE DEV_LABEL "(itf %d): LANAI%s, serialno=%u(0x%X), " 2226 "board_rev=%d\n", lanai->number, 2227 lanai->type==lanai2 ? "2" : "HB", (unsigned int) lanai->serialno, 2228 (unsigned int) lanai->serialno, lanai->board_rev); 2229 return 0; 2230 2231 error_vcctable: 2232 vcc_table_deallocate(lanai); 2233 error_service: 2234 service_buffer_deallocate(lanai); 2235 error_unmap: 2236 reset_board(lanai); 2237 #ifdef USE_POWERDOWN 2238 lanai->conf1 = reg_read(lanai, Config1_Reg) | CONFIG1_POWERDOWN; 2239 conf1_write(lanai); 2240 #endif 2241 iounmap(lanai->base); 2242 error_pci: 2243 pci_disable_device(lanai->pci); 2244 error: 2245 return result; 2246 } 2247 2248 /* called when device is being shutdown, and all vcc's are gone - higher 2249 * levels will deallocate the atm device for us 2250 */ 2251 static void lanai_dev_close(struct atm_dev *atmdev) 2252 { 2253 struct lanai_dev *lanai = (struct lanai_dev *) atmdev->dev_data; 2254 printk(KERN_INFO DEV_LABEL "(itf %d): shutting down interface\n", 2255 lanai->number); 2256 lanai_timed_poll_stop(lanai); 2257 #ifdef USE_POWERDOWN 2258 lanai->conf1 = reg_read(lanai, Config1_Reg) & ~CONFIG1_POWERDOWN; 2259 conf1_write(lanai); 2260 #endif 2261 intr_disable(lanai, INT_ALL); 2262 free_irq(lanai->pci->irq, lanai); 2263 reset_board(lanai); 2264 #ifdef USE_POWERDOWN 2265 lanai->conf1 |= CONFIG1_POWERDOWN; 2266 conf1_write(lanai); 2267 #endif 2268 pci_disable_device(lanai->pci); 2269 vcc_table_deallocate(lanai); 2270 service_buffer_deallocate(lanai); 2271 iounmap(lanai->base); 2272 kfree(lanai); 2273 } 2274 2275 /* close a vcc */ 2276 static void lanai_close(struct atm_vcc *atmvcc) 2277 { 2278 struct lanai_vcc *lvcc = (struct lanai_vcc *) atmvcc->dev_data; 2279 struct lanai_dev *lanai = (struct lanai_dev *) atmvcc->dev->dev_data; 2280 if (lvcc == NULL) 2281 return; 2282 clear_bit(ATM_VF_READY, &atmvcc->flags); 2283 clear_bit(ATM_VF_PARTIAL, &atmvcc->flags); 2284 if (lvcc->rx.atmvcc == atmvcc) { 2285 lanai_shutdown_rx_vci(lvcc); 2286 if (atmvcc->qos.aal == ATM_AAL0) { 2287 if (--lanai->naal0 <= 0) 2288 aal0_buffer_free(lanai); 2289 } else 2290 lanai_buf_deallocate(&lvcc->rx.buf, lanai->pci); 2291 lvcc->rx.atmvcc = NULL; 2292 } 2293 if (lvcc->tx.atmvcc == atmvcc) { 2294 if (atmvcc == lanai->cbrvcc) { 2295 if (lvcc->vbase != NULL) 2296 lanai_cbr_shutdown(lanai); 2297 lanai->cbrvcc = NULL; 2298 } 2299 lanai_shutdown_tx_vci(lanai, lvcc); 2300 lanai_buf_deallocate(&lvcc->tx.buf, lanai->pci); 2301 lvcc->tx.atmvcc = NULL; 2302 } 2303 if (--lvcc->nref == 0) { 2304 host_vcc_unbind(lanai, lvcc); 2305 kfree(lvcc); 2306 } 2307 atmvcc->dev_data = NULL; 2308 clear_bit(ATM_VF_ADDR, &atmvcc->flags); 2309 } 2310 2311 /* open a vcc on the card to vpi/vci */ 2312 static int lanai_open(struct atm_vcc *atmvcc) 2313 { 2314 struct lanai_dev *lanai; 2315 struct lanai_vcc *lvcc; 2316 int result = 0; 2317 int vci = atmvcc->vci; 2318 short vpi = atmvcc->vpi; 2319 /* we don't support partial open - it's not really useful anyway */ 2320 if ((test_bit(ATM_VF_PARTIAL, &atmvcc->flags)) || 2321 (vpi == ATM_VPI_UNSPEC) || (vci == ATM_VCI_UNSPEC)) 2322 return -EINVAL; 2323 lanai = (struct lanai_dev *) atmvcc->dev->dev_data; 2324 result = lanai_normalize_ci(lanai, atmvcc, &vpi, &vci); 2325 if (unlikely(result != 0)) 2326 goto out; 2327 set_bit(ATM_VF_ADDR, &atmvcc->flags); 2328 if (atmvcc->qos.aal != ATM_AAL0 && atmvcc->qos.aal != ATM_AAL5) 2329 return -EINVAL; 2330 DPRINTK(DEV_LABEL "(itf %d): open %d.%d\n", lanai->number, 2331 (int) vpi, vci); 2332 lvcc = lanai->vccs[vci]; 2333 if (lvcc == NULL) { 2334 lvcc = new_lanai_vcc(); 2335 if (unlikely(lvcc == NULL)) 2336 return -ENOMEM; 2337 atmvcc->dev_data = lvcc; 2338 } 2339 lvcc->nref++; 2340 if (atmvcc->qos.rxtp.traffic_class != ATM_NONE) { 2341 APRINTK(lvcc->rx.atmvcc == NULL, "rx.atmvcc!=NULL, vci=%d\n", 2342 vci); 2343 if (atmvcc->qos.aal == ATM_AAL0) { 2344 if (lanai->naal0 == 0) 2345 result = aal0_buffer_allocate(lanai); 2346 } else 2347 result = lanai_setup_rx_vci_aal5( 2348 lanai, lvcc, &atmvcc->qos); 2349 if (unlikely(result != 0)) 2350 goto out_free; 2351 lvcc->rx.atmvcc = atmvcc; 2352 lvcc->stats.rx_nomem = 0; 2353 lvcc->stats.x.aal5.rx_badlen = 0; 2354 lvcc->stats.x.aal5.service_trash = 0; 2355 lvcc->stats.x.aal5.service_stream = 0; 2356 lvcc->stats.x.aal5.service_rxcrc = 0; 2357 if (atmvcc->qos.aal == ATM_AAL0) 2358 lanai->naal0++; 2359 } 2360 if (atmvcc->qos.txtp.traffic_class != ATM_NONE) { 2361 APRINTK(lvcc->tx.atmvcc == NULL, "tx.atmvcc!=NULL, vci=%d\n", 2362 vci); 2363 result = lanai_setup_tx_vci(lanai, lvcc, &atmvcc->qos); 2364 if (unlikely(result != 0)) 2365 goto out_free; 2366 lvcc->tx.atmvcc = atmvcc; 2367 if (atmvcc->qos.txtp.traffic_class == ATM_CBR) { 2368 APRINTK(lanai->cbrvcc == NULL, 2369 "cbrvcc!=NULL, vci=%d\n", vci); 2370 lanai->cbrvcc = atmvcc; 2371 } 2372 } 2373 host_vcc_bind(lanai, lvcc, vci); 2374 /* 2375 * Make sure everything made it to RAM before we tell the card about 2376 * the VCC 2377 */ 2378 wmb(); 2379 if (atmvcc == lvcc->rx.atmvcc) 2380 host_vcc_start_rx(lvcc); 2381 if (atmvcc == lvcc->tx.atmvcc) { 2382 host_vcc_start_tx(lvcc); 2383 if (lanai->cbrvcc == atmvcc) 2384 lanai_cbr_setup(lanai); 2385 } 2386 set_bit(ATM_VF_READY, &atmvcc->flags); 2387 return 0; 2388 out_free: 2389 lanai_close(atmvcc); 2390 out: 2391 return result; 2392 } 2393 2394 static int lanai_send(struct atm_vcc *atmvcc, struct sk_buff *skb) 2395 { 2396 struct lanai_vcc *lvcc = (struct lanai_vcc *) atmvcc->dev_data; 2397 struct lanai_dev *lanai = (struct lanai_dev *) atmvcc->dev->dev_data; 2398 unsigned long flags; 2399 if (unlikely(lvcc == NULL || lvcc->vbase == NULL || 2400 lvcc->tx.atmvcc != atmvcc)) 2401 goto einval; 2402 #ifdef DEBUG 2403 if (unlikely(skb == NULL)) { 2404 DPRINTK("lanai_send: skb==NULL for vci=%d\n", atmvcc->vci); 2405 goto einval; 2406 } 2407 if (unlikely(lanai == NULL)) { 2408 DPRINTK("lanai_send: lanai==NULL for vci=%d\n", atmvcc->vci); 2409 goto einval; 2410 } 2411 #endif 2412 ATM_SKB(skb)->vcc = atmvcc; 2413 switch (atmvcc->qos.aal) { 2414 case ATM_AAL5: 2415 read_lock_irqsave(&vcc_sklist_lock, flags); 2416 vcc_tx_aal5(lanai, lvcc, skb); 2417 read_unlock_irqrestore(&vcc_sklist_lock, flags); 2418 return 0; 2419 case ATM_AAL0: 2420 if (unlikely(skb->len != ATM_CELL_SIZE-1)) 2421 goto einval; 2422 /* NOTE - this next line is technically invalid - we haven't unshared skb */ 2423 cpu_to_be32s((u32 *) skb->data); 2424 read_lock_irqsave(&vcc_sklist_lock, flags); 2425 vcc_tx_aal0(lanai, lvcc, skb); 2426 read_unlock_irqrestore(&vcc_sklist_lock, flags); 2427 return 0; 2428 } 2429 DPRINTK("lanai_send: bad aal=%d on vci=%d\n", (int) atmvcc->qos.aal, 2430 atmvcc->vci); 2431 einval: 2432 lanai_free_skb(atmvcc, skb); 2433 return -EINVAL; 2434 } 2435 2436 static int lanai_change_qos(struct atm_vcc *atmvcc, 2437 /*const*/ struct atm_qos *qos, int flags) 2438 { 2439 return -EBUSY; /* TODO: need to write this */ 2440 } 2441 2442 #ifndef CONFIG_PROC_FS 2443 #define lanai_proc_read NULL 2444 #else 2445 static int lanai_proc_read(struct atm_dev *atmdev, loff_t *pos, char *page) 2446 { 2447 struct lanai_dev *lanai = (struct lanai_dev *) atmdev->dev_data; 2448 loff_t left = *pos; 2449 struct lanai_vcc *lvcc; 2450 if (left-- == 0) 2451 return sprintf(page, DEV_LABEL "(itf %d): chip=LANAI%s, " 2452 "serial=%u, magic=0x%08X, num_vci=%d\n", 2453 atmdev->number, lanai->type==lanai2 ? "2" : "HB", 2454 (unsigned int) lanai->serialno, 2455 (unsigned int) lanai->magicno, lanai->num_vci); 2456 if (left-- == 0) 2457 return sprintf(page, "revision: board=%d, pci_if=%d\n", 2458 lanai->board_rev, (int) lanai->pci->revision); 2459 if (left-- == 0) 2460 return sprintf(page, "EEPROM ESI: %pM\n", 2461 &lanai->eeprom[EEPROM_MAC]); 2462 if (left-- == 0) 2463 return sprintf(page, "status: SOOL=%d, LOCD=%d, LED=%d, " 2464 "GPIN=%d\n", (lanai->status & STATUS_SOOL) ? 1 : 0, 2465 (lanai->status & STATUS_LOCD) ? 1 : 0, 2466 (lanai->status & STATUS_LED) ? 1 : 0, 2467 (lanai->status & STATUS_GPIN) ? 1 : 0); 2468 if (left-- == 0) 2469 return sprintf(page, "global buffer sizes: service=%Zu, " 2470 "aal0_rx=%Zu\n", lanai_buf_size(&lanai->service), 2471 lanai->naal0 ? lanai_buf_size(&lanai->aal0buf) : 0); 2472 if (left-- == 0) { 2473 get_statistics(lanai); 2474 return sprintf(page, "cells in error: overflow=%u, " 2475 "closed_vci=%u, bad_HEC=%u, rx_fifo=%u\n", 2476 lanai->stats.ovfl_trash, lanai->stats.vci_trash, 2477 lanai->stats.hec_err, lanai->stats.atm_ovfl); 2478 } 2479 if (left-- == 0) 2480 return sprintf(page, "PCI errors: parity_detect=%u, " 2481 "master_abort=%u, master_target_abort=%u,\n", 2482 lanai->stats.pcierr_parity_detect, 2483 lanai->stats.pcierr_serr_set, 2484 lanai->stats.pcierr_m_target_abort); 2485 if (left-- == 0) 2486 return sprintf(page, " slave_target_abort=%u, " 2487 "master_parity=%u\n", lanai->stats.pcierr_s_target_abort, 2488 lanai->stats.pcierr_master_parity); 2489 if (left-- == 0) 2490 return sprintf(page, " no_tx=%u, " 2491 "no_rx=%u, bad_rx_aal=%u\n", lanai->stats.service_norx, 2492 lanai->stats.service_notx, 2493 lanai->stats.service_rxnotaal5); 2494 if (left-- == 0) 2495 return sprintf(page, "resets: dma=%u, card=%u\n", 2496 lanai->stats.dma_reenable, lanai->stats.card_reset); 2497 /* At this point, "left" should be the VCI we're looking for */ 2498 read_lock(&vcc_sklist_lock); 2499 for (; ; left++) { 2500 if (left >= NUM_VCI) { 2501 left = 0; 2502 goto out; 2503 } 2504 if ((lvcc = lanai->vccs[left]) != NULL) 2505 break; 2506 (*pos)++; 2507 } 2508 /* Note that we re-use "left" here since we're done with it */ 2509 left = sprintf(page, "VCI %4d: nref=%d, rx_nomem=%u", (vci_t) left, 2510 lvcc->nref, lvcc->stats.rx_nomem); 2511 if (lvcc->rx.atmvcc != NULL) { 2512 left += sprintf(&page[left], ",\n rx_AAL=%d", 2513 lvcc->rx.atmvcc->qos.aal == ATM_AAL5 ? 5 : 0); 2514 if (lvcc->rx.atmvcc->qos.aal == ATM_AAL5) 2515 left += sprintf(&page[left], ", rx_buf_size=%Zu, " 2516 "rx_bad_len=%u,\n rx_service_trash=%u, " 2517 "rx_service_stream=%u, rx_bad_crc=%u", 2518 lanai_buf_size(&lvcc->rx.buf), 2519 lvcc->stats.x.aal5.rx_badlen, 2520 lvcc->stats.x.aal5.service_trash, 2521 lvcc->stats.x.aal5.service_stream, 2522 lvcc->stats.x.aal5.service_rxcrc); 2523 } 2524 if (lvcc->tx.atmvcc != NULL) 2525 left += sprintf(&page[left], ",\n tx_AAL=%d, " 2526 "tx_buf_size=%Zu, tx_qos=%cBR, tx_backlogged=%c", 2527 lvcc->tx.atmvcc->qos.aal == ATM_AAL5 ? 5 : 0, 2528 lanai_buf_size(&lvcc->tx.buf), 2529 lvcc->tx.atmvcc == lanai->cbrvcc ? 'C' : 'U', 2530 vcc_is_backlogged(lvcc) ? 'Y' : 'N'); 2531 page[left++] = '\n'; 2532 page[left] = '\0'; 2533 out: 2534 read_unlock(&vcc_sklist_lock); 2535 return left; 2536 } 2537 #endif /* CONFIG_PROC_FS */ 2538 2539 /* -------------------- HOOKS: */ 2540 2541 static const struct atmdev_ops ops = { 2542 .dev_close = lanai_dev_close, 2543 .open = lanai_open, 2544 .close = lanai_close, 2545 .getsockopt = NULL, 2546 .setsockopt = NULL, 2547 .send = lanai_send, 2548 .phy_put = NULL, 2549 .phy_get = NULL, 2550 .change_qos = lanai_change_qos, 2551 .proc_read = lanai_proc_read, 2552 .owner = THIS_MODULE 2553 }; 2554 2555 /* initialize one probed card */ 2556 static int lanai_init_one(struct pci_dev *pci, 2557 const struct pci_device_id *ident) 2558 { 2559 struct lanai_dev *lanai; 2560 struct atm_dev *atmdev; 2561 int result; 2562 2563 lanai = kmalloc(sizeof(*lanai), GFP_KERNEL); 2564 if (lanai == NULL) { 2565 printk(KERN_ERR DEV_LABEL 2566 ": couldn't allocate dev_data structure!\n"); 2567 return -ENOMEM; 2568 } 2569 2570 atmdev = atm_dev_register(DEV_LABEL, &pci->dev, &ops, -1, NULL); 2571 if (atmdev == NULL) { 2572 printk(KERN_ERR DEV_LABEL 2573 ": couldn't register atm device!\n"); 2574 kfree(lanai); 2575 return -EBUSY; 2576 } 2577 2578 atmdev->dev_data = lanai; 2579 lanai->pci = pci; 2580 lanai->type = (enum lanai_type) ident->device; 2581 2582 result = lanai_dev_open(atmdev); 2583 if (result != 0) { 2584 DPRINTK("lanai_start() failed, err=%d\n", -result); 2585 atm_dev_deregister(atmdev); 2586 kfree(lanai); 2587 } 2588 return result; 2589 } 2590 2591 static struct pci_device_id lanai_pci_tbl[] = { 2592 { PCI_VDEVICE(EF, PCI_DEVICE_ID_EF_ATM_LANAI2) }, 2593 { PCI_VDEVICE(EF, PCI_DEVICE_ID_EF_ATM_LANAIHB) }, 2594 { 0, } /* terminal entry */ 2595 }; 2596 MODULE_DEVICE_TABLE(pci, lanai_pci_tbl); 2597 2598 static struct pci_driver lanai_driver = { 2599 .name = DEV_LABEL, 2600 .id_table = lanai_pci_tbl, 2601 .probe = lanai_init_one, 2602 }; 2603 2604 module_pci_driver(lanai_driver); 2605 2606 MODULE_AUTHOR("Mitchell Blank Jr <mitch@sfgoth.com>"); 2607 MODULE_DESCRIPTION("Efficient Networks Speedstream 3010 driver"); 2608 MODULE_LICENSE("GPL"); 2609