1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * AppliedMicro X-Gene SoC SATA Host Controller Driver 4 * 5 * Copyright (c) 2014, Applied Micro Circuits Corporation 6 * Author: Loc Ho <lho@apm.com> 7 * Tuan Phan <tphan@apm.com> 8 * Suman Tripathi <stripathi@apm.com> 9 * 10 * NOTE: PM support is not currently available. 11 */ 12 #include <linux/acpi.h> 13 #include <linux/module.h> 14 #include <linux/platform_device.h> 15 #include <linux/ahci_platform.h> 16 #include <linux/of_address.h> 17 #include <linux/of_device.h> 18 #include <linux/of_irq.h> 19 #include <linux/phy/phy.h> 20 #include "ahci.h" 21 22 #define DRV_NAME "xgene-ahci" 23 24 /* Max # of disk per a controller */ 25 #define MAX_AHCI_CHN_PERCTR 2 26 27 /* MUX CSR */ 28 #define SATA_ENET_CONFIG_REG 0x00000000 29 #define CFG_SATA_ENET_SELECT_MASK 0x00000001 30 31 /* SATA core host controller CSR */ 32 #define SLVRDERRATTRIBUTES 0x00000000 33 #define SLVWRERRATTRIBUTES 0x00000004 34 #define MSTRDERRATTRIBUTES 0x00000008 35 #define MSTWRERRATTRIBUTES 0x0000000c 36 #define BUSCTLREG 0x00000014 37 #define IOFMSTRWAUX 0x00000018 38 #define INTSTATUSMASK 0x0000002c 39 #define ERRINTSTATUS 0x00000030 40 #define ERRINTSTATUSMASK 0x00000034 41 42 /* SATA host AHCI CSR */ 43 #define PORTCFG 0x000000a4 44 #define PORTADDR_SET(dst, src) \ 45 (((dst) & ~0x0000003f) | (((u32)(src)) & 0x0000003f)) 46 #define PORTPHY1CFG 0x000000a8 47 #define PORTPHY1CFG_FRCPHYRDY_SET(dst, src) \ 48 (((dst) & ~0x00100000) | (((u32)(src) << 0x14) & 0x00100000)) 49 #define PORTPHY2CFG 0x000000ac 50 #define PORTPHY3CFG 0x000000b0 51 #define PORTPHY4CFG 0x000000b4 52 #define PORTPHY5CFG 0x000000b8 53 #define SCTL0 0x0000012C 54 #define PORTPHY5CFG_RTCHG_SET(dst, src) \ 55 (((dst) & ~0xfff00000) | (((u32)(src) << 0x14) & 0xfff00000)) 56 #define PORTAXICFG_EN_CONTEXT_SET(dst, src) \ 57 (((dst) & ~0x01000000) | (((u32)(src) << 0x18) & 0x01000000)) 58 #define PORTAXICFG 0x000000bc 59 #define PORTAXICFG_OUTTRANS_SET(dst, src) \ 60 (((dst) & ~0x00f00000) | (((u32)(src) << 0x14) & 0x00f00000)) 61 #define PORTRANSCFG 0x000000c8 62 #define PORTRANSCFG_RXWM_SET(dst, src) \ 63 (((dst) & ~0x0000007f) | (((u32)(src)) & 0x0000007f)) 64 65 /* SATA host controller AXI CSR */ 66 #define INT_SLV_TMOMASK 0x00000010 67 68 /* SATA diagnostic CSR */ 69 #define CFG_MEM_RAM_SHUTDOWN 0x00000070 70 #define BLOCK_MEM_RDY 0x00000074 71 72 /* Max retry for link down */ 73 #define MAX_LINK_DOWN_RETRY 3 74 75 enum xgene_ahci_version { 76 XGENE_AHCI_V1 = 1, 77 XGENE_AHCI_V2, 78 }; 79 80 struct xgene_ahci_context { 81 struct ahci_host_priv *hpriv; 82 struct device *dev; 83 u8 last_cmd[MAX_AHCI_CHN_PERCTR]; /* tracking the last command issued*/ 84 u32 class[MAX_AHCI_CHN_PERCTR]; /* tracking the class of device */ 85 void __iomem *csr_core; /* Core CSR address of IP */ 86 void __iomem *csr_diag; /* Diag CSR address of IP */ 87 void __iomem *csr_axi; /* AXI CSR address of IP */ 88 void __iomem *csr_mux; /* MUX CSR address of IP */ 89 }; 90 91 static int xgene_ahci_init_memram(struct xgene_ahci_context *ctx) 92 { 93 dev_dbg(ctx->dev, "Release memory from shutdown\n"); 94 writel(0x0, ctx->csr_diag + CFG_MEM_RAM_SHUTDOWN); 95 readl(ctx->csr_diag + CFG_MEM_RAM_SHUTDOWN); /* Force a barrier */ 96 msleep(1); /* reset may take up to 1ms */ 97 if (readl(ctx->csr_diag + BLOCK_MEM_RDY) != 0xFFFFFFFF) { 98 dev_err(ctx->dev, "failed to release memory from shutdown\n"); 99 return -ENODEV; 100 } 101 return 0; 102 } 103 104 /** 105 * xgene_ahci_poll_reg_val- Poll a register on a specific value. 106 * @ap : ATA port of interest. 107 * @reg : Register of interest. 108 * @val : Value to be attained. 109 * @interval : waiting interval for polling. 110 * @timeout : timeout for achieving the value. 111 */ 112 static int xgene_ahci_poll_reg_val(struct ata_port *ap, 113 void __iomem *reg, unsigned 114 int val, unsigned long interval, 115 unsigned long timeout) 116 { 117 unsigned long deadline; 118 unsigned int tmp; 119 120 tmp = ioread32(reg); 121 deadline = ata_deadline(jiffies, timeout); 122 123 while (tmp != val && time_before(jiffies, deadline)) { 124 ata_msleep(ap, interval); 125 tmp = ioread32(reg); 126 } 127 128 return tmp; 129 } 130 131 /** 132 * xgene_ahci_restart_engine - Restart the dma engine. 133 * @ap : ATA port of interest 134 * 135 * Waits for completion of multiple commands and restarts 136 * the DMA engine inside the controller. 137 */ 138 static int xgene_ahci_restart_engine(struct ata_port *ap) 139 { 140 struct ahci_host_priv *hpriv = ap->host->private_data; 141 struct ahci_port_priv *pp = ap->private_data; 142 void __iomem *port_mmio = ahci_port_base(ap); 143 u32 fbs; 144 145 /* 146 * In case of PMP multiple IDENTIFY DEVICE commands can be 147 * issued inside PxCI. So need to poll PxCI for the 148 * completion of outstanding IDENTIFY DEVICE commands before 149 * we restart the DMA engine. 150 */ 151 if (xgene_ahci_poll_reg_val(ap, port_mmio + 152 PORT_CMD_ISSUE, 0x0, 1, 100)) 153 return -EBUSY; 154 155 hpriv->stop_engine(ap); 156 ahci_start_fis_rx(ap); 157 158 /* 159 * Enable the PxFBS.FBS_EN bit as it 160 * gets cleared due to stopping the engine. 161 */ 162 if (pp->fbs_supported) { 163 fbs = readl(port_mmio + PORT_FBS); 164 writel(fbs | PORT_FBS_EN, port_mmio + PORT_FBS); 165 fbs = readl(port_mmio + PORT_FBS); 166 } 167 168 hpriv->start_engine(ap); 169 170 return 0; 171 } 172 173 /** 174 * xgene_ahci_qc_issue - Issue commands to the device 175 * @qc: Command to issue 176 * 177 * Due to Hardware errata for IDENTIFY DEVICE command, the controller cannot 178 * clear the BSY bit after receiving the PIO setup FIS. This results in the dma 179 * state machine goes into the CMFatalErrorUpdate state and locks up. By 180 * restarting the dma engine, it removes the controller out of lock up state. 181 * 182 * Due to H/W errata, the controller is unable to save the PMP 183 * field fetched from command header before sending the H2D FIS. 184 * When the device returns the PMP port field in the D2H FIS, there is 185 * a mismatch and results in command completion failure. The 186 * workaround is to write the pmp value to PxFBS.DEV field before issuing 187 * any command to PMP. 188 */ 189 static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc) 190 { 191 struct ata_port *ap = qc->ap; 192 struct ahci_host_priv *hpriv = ap->host->private_data; 193 struct xgene_ahci_context *ctx = hpriv->plat_data; 194 int rc = 0; 195 u32 port_fbs; 196 void __iomem *port_mmio = ahci_port_base(ap); 197 198 /* 199 * Write the pmp value to PxFBS.DEV 200 * for case of Port Mulitplier. 201 */ 202 if (ctx->class[ap->port_no] == ATA_DEV_PMP) { 203 port_fbs = readl(port_mmio + PORT_FBS); 204 port_fbs &= ~PORT_FBS_DEV_MASK; 205 port_fbs |= qc->dev->link->pmp << PORT_FBS_DEV_OFFSET; 206 writel(port_fbs, port_mmio + PORT_FBS); 207 } 208 209 if (unlikely((ctx->last_cmd[ap->port_no] == ATA_CMD_ID_ATA) || 210 (ctx->last_cmd[ap->port_no] == ATA_CMD_PACKET) || 211 (ctx->last_cmd[ap->port_no] == ATA_CMD_SMART))) 212 xgene_ahci_restart_engine(ap); 213 214 rc = ahci_qc_issue(qc); 215 216 /* Save the last command issued */ 217 ctx->last_cmd[ap->port_no] = qc->tf.command; 218 219 return rc; 220 } 221 222 static bool xgene_ahci_is_memram_inited(struct xgene_ahci_context *ctx) 223 { 224 void __iomem *diagcsr = ctx->csr_diag; 225 226 return (readl(diagcsr + CFG_MEM_RAM_SHUTDOWN) == 0 && 227 readl(diagcsr + BLOCK_MEM_RDY) == 0xFFFFFFFF); 228 } 229 230 /** 231 * xgene_ahci_read_id - Read ID data from the specified device 232 * @dev: device 233 * @tf: proposed taskfile 234 * @id: data buffer 235 * 236 * This custom read ID function is required due to the fact that the HW 237 * does not support DEVSLP. 238 */ 239 static unsigned int xgene_ahci_read_id(struct ata_device *dev, 240 struct ata_taskfile *tf, __le16 *id) 241 { 242 u32 err_mask; 243 244 err_mask = ata_do_dev_read_id(dev, tf, id); 245 if (err_mask) 246 return err_mask; 247 248 /* 249 * Mask reserved area. Word78 spec of Link Power Management 250 * bit15-8: reserved 251 * bit7: NCQ autosence 252 * bit6: Software settings preservation supported 253 * bit5: reserved 254 * bit4: In-order sata delivery supported 255 * bit3: DIPM requests supported 256 * bit2: DMA Setup FIS Auto-Activate optimization supported 257 * bit1: DMA Setup FIX non-Zero buffer offsets supported 258 * bit0: Reserved 259 * 260 * Clear reserved bit 8 (DEVSLP bit) as we don't support DEVSLP 261 */ 262 id[ATA_ID_FEATURE_SUPP] &= cpu_to_le16(~(1 << 8)); 263 264 return 0; 265 } 266 267 static void xgene_ahci_set_phy_cfg(struct xgene_ahci_context *ctx, int channel) 268 { 269 void __iomem *mmio = ctx->hpriv->mmio; 270 u32 val; 271 272 dev_dbg(ctx->dev, "port configure mmio 0x%p channel %d\n", 273 mmio, channel); 274 val = readl(mmio + PORTCFG); 275 val = PORTADDR_SET(val, channel == 0 ? 2 : 3); 276 writel(val, mmio + PORTCFG); 277 readl(mmio + PORTCFG); /* Force a barrier */ 278 /* Disable fix rate */ 279 writel(0x0001fffe, mmio + PORTPHY1CFG); 280 readl(mmio + PORTPHY1CFG); /* Force a barrier */ 281 writel(0x28183219, mmio + PORTPHY2CFG); 282 readl(mmio + PORTPHY2CFG); /* Force a barrier */ 283 writel(0x13081008, mmio + PORTPHY3CFG); 284 readl(mmio + PORTPHY3CFG); /* Force a barrier */ 285 writel(0x00480815, mmio + PORTPHY4CFG); 286 readl(mmio + PORTPHY4CFG); /* Force a barrier */ 287 /* Set window negotiation */ 288 val = readl(mmio + PORTPHY5CFG); 289 val = PORTPHY5CFG_RTCHG_SET(val, 0x300); 290 writel(val, mmio + PORTPHY5CFG); 291 readl(mmio + PORTPHY5CFG); /* Force a barrier */ 292 val = readl(mmio + PORTAXICFG); 293 val = PORTAXICFG_EN_CONTEXT_SET(val, 0x1); /* Enable context mgmt */ 294 val = PORTAXICFG_OUTTRANS_SET(val, 0xe); /* Set outstanding */ 295 writel(val, mmio + PORTAXICFG); 296 readl(mmio + PORTAXICFG); /* Force a barrier */ 297 /* Set the watermark threshold of the receive FIFO */ 298 val = readl(mmio + PORTRANSCFG); 299 val = PORTRANSCFG_RXWM_SET(val, 0x30); 300 writel(val, mmio + PORTRANSCFG); 301 } 302 303 /** 304 * xgene_ahci_do_hardreset - Issue the actual COMRESET 305 * @link: link to reset 306 * @deadline: deadline jiffies for the operation 307 * @online: Return value to indicate if device online 308 * 309 * Due to the limitation of the hardware PHY, a difference set of setting is 310 * required for each supported disk speed - Gen3 (6.0Gbps), Gen2 (3.0Gbps), 311 * and Gen1 (1.5Gbps). Otherwise during long IO stress test, the PHY will 312 * report disparity error and etc. In addition, during COMRESET, there can 313 * be error reported in the register PORT_SCR_ERR. For SERR_DISPARITY and 314 * SERR_10B_8B_ERR, the PHY receiver line must be reseted. Also during long 315 * reboot cycle regression, sometimes the PHY reports link down even if the 316 * device is present because of speed negotiation failure. so need to retry 317 * the COMRESET to get the link up. The following algorithm is followed to 318 * proper configure the hardware PHY during COMRESET: 319 * 320 * Alg Part 1: 321 * 1. Start the PHY at Gen3 speed (default setting) 322 * 2. Issue the COMRESET 323 * 3. If no link, go to Alg Part 3 324 * 4. If link up, determine if the negotiated speed matches the PHY 325 * configured speed 326 * 5. If they matched, go to Alg Part 2 327 * 6. If they do not matched and first time, configure the PHY for the linked 328 * up disk speed and repeat step 2 329 * 7. Go to Alg Part 2 330 * 331 * Alg Part 2: 332 * 1. On link up, if there are any SERR_DISPARITY and SERR_10B_8B_ERR error 333 * reported in the register PORT_SCR_ERR, then reset the PHY receiver line 334 * 2. Go to Alg Part 4 335 * 336 * Alg Part 3: 337 * 1. Check the PORT_SCR_STAT to see whether device presence detected but PHY 338 * communication establishment failed and maximum link down attempts are 339 * less than Max attempts 3 then goto Alg Part 1. 340 * 2. Go to Alg Part 4. 341 * 342 * Alg Part 4: 343 * 1. Clear any pending from register PORT_SCR_ERR. 344 * 345 * NOTE: For the initial version, we will NOT support Gen1/Gen2. In addition 346 * and until the underlying PHY supports an method to reset the receiver 347 * line, on detection of SERR_DISPARITY or SERR_10B_8B_ERR errors, 348 * an warning message will be printed. 349 */ 350 static int xgene_ahci_do_hardreset(struct ata_link *link, 351 unsigned long deadline, bool *online) 352 { 353 const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); 354 struct ata_port *ap = link->ap; 355 struct ahci_host_priv *hpriv = ap->host->private_data; 356 struct xgene_ahci_context *ctx = hpriv->plat_data; 357 struct ahci_port_priv *pp = ap->private_data; 358 u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; 359 void __iomem *port_mmio = ahci_port_base(ap); 360 struct ata_taskfile tf; 361 int link_down_retry = 0; 362 int rc; 363 u32 val, sstatus; 364 365 do { 366 /* clear D2H reception area to properly wait for D2H FIS */ 367 ata_tf_init(link->device, &tf); 368 tf.status = ATA_BUSY; 369 ata_tf_to_fis(&tf, 0, 0, d2h_fis); 370 rc = sata_link_hardreset(link, timing, deadline, online, 371 ahci_check_ready); 372 if (*online) { 373 val = readl(port_mmio + PORT_SCR_ERR); 374 if (val & (SERR_DISPARITY | SERR_10B_8B_ERR)) 375 dev_warn(ctx->dev, "link has error\n"); 376 break; 377 } 378 379 sata_scr_read(link, SCR_STATUS, &sstatus); 380 } while (link_down_retry++ < MAX_LINK_DOWN_RETRY && 381 (sstatus & 0xff) == 0x1); 382 383 /* clear all errors if any pending */ 384 val = readl(port_mmio + PORT_SCR_ERR); 385 writel(val, port_mmio + PORT_SCR_ERR); 386 387 return rc; 388 } 389 390 static int xgene_ahci_hardreset(struct ata_link *link, unsigned int *class, 391 unsigned long deadline) 392 { 393 struct ata_port *ap = link->ap; 394 struct ahci_host_priv *hpriv = ap->host->private_data; 395 void __iomem *port_mmio = ahci_port_base(ap); 396 bool online; 397 int rc; 398 u32 portcmd_saved; 399 u32 portclb_saved; 400 u32 portclbhi_saved; 401 u32 portrxfis_saved; 402 u32 portrxfishi_saved; 403 404 /* As hardreset resets these CSR, save it to restore later */ 405 portcmd_saved = readl(port_mmio + PORT_CMD); 406 portclb_saved = readl(port_mmio + PORT_LST_ADDR); 407 portclbhi_saved = readl(port_mmio + PORT_LST_ADDR_HI); 408 portrxfis_saved = readl(port_mmio + PORT_FIS_ADDR); 409 portrxfishi_saved = readl(port_mmio + PORT_FIS_ADDR_HI); 410 411 hpriv->stop_engine(ap); 412 413 rc = xgene_ahci_do_hardreset(link, deadline, &online); 414 415 /* As controller hardreset clears them, restore them */ 416 writel(portcmd_saved, port_mmio + PORT_CMD); 417 writel(portclb_saved, port_mmio + PORT_LST_ADDR); 418 writel(portclbhi_saved, port_mmio + PORT_LST_ADDR_HI); 419 writel(portrxfis_saved, port_mmio + PORT_FIS_ADDR); 420 writel(portrxfishi_saved, port_mmio + PORT_FIS_ADDR_HI); 421 422 hpriv->start_engine(ap); 423 424 if (online) 425 *class = ahci_dev_classify(ap); 426 427 return rc; 428 } 429 430 static void xgene_ahci_host_stop(struct ata_host *host) 431 { 432 struct ahci_host_priv *hpriv = host->private_data; 433 434 ahci_platform_disable_resources(hpriv); 435 } 436 437 /** 438 * xgene_ahci_pmp_softreset - Issue the softreset to the drives connected 439 * to Port Multiplier. 440 * @link: link to reset 441 * @class: Return value to indicate class of device 442 * @deadline: deadline jiffies for the operation 443 * 444 * Due to H/W errata, the controller is unable to save the PMP 445 * field fetched from command header before sending the H2D FIS. 446 * When the device returns the PMP port field in the D2H FIS, there is 447 * a mismatch and results in command completion failure. The workaround 448 * is to write the pmp value to PxFBS.DEV field before issuing any command 449 * to PMP. 450 */ 451 static int xgene_ahci_pmp_softreset(struct ata_link *link, unsigned int *class, 452 unsigned long deadline) 453 { 454 int pmp = sata_srst_pmp(link); 455 struct ata_port *ap = link->ap; 456 u32 rc; 457 void __iomem *port_mmio = ahci_port_base(ap); 458 u32 port_fbs; 459 460 /* 461 * Set PxFBS.DEV field with pmp 462 * value. 463 */ 464 port_fbs = readl(port_mmio + PORT_FBS); 465 port_fbs &= ~PORT_FBS_DEV_MASK; 466 port_fbs |= pmp << PORT_FBS_DEV_OFFSET; 467 writel(port_fbs, port_mmio + PORT_FBS); 468 469 rc = ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready); 470 471 return rc; 472 } 473 474 /** 475 * xgene_ahci_softreset - Issue the softreset to the drive. 476 * @link: link to reset 477 * @class: Return value to indicate class of device 478 * @deadline: deadline jiffies for the operation 479 * 480 * Due to H/W errata, the controller is unable to save the PMP 481 * field fetched from command header before sending the H2D FIS. 482 * When the device returns the PMP port field in the D2H FIS, there is 483 * a mismatch and results in command completion failure. The workaround 484 * is to write the pmp value to PxFBS.DEV field before issuing any command 485 * to PMP. Here is the algorithm to detect PMP : 486 * 487 * 1. Save the PxFBS value 488 * 2. Program PxFBS.DEV with pmp value send by framework. Framework sends 489 * 0xF for both PMP/NON-PMP initially 490 * 3. Issue softreset 491 * 4. If signature class is PMP goto 6 492 * 5. restore the original PxFBS and goto 3 493 * 6. return 494 */ 495 static int xgene_ahci_softreset(struct ata_link *link, unsigned int *class, 496 unsigned long deadline) 497 { 498 int pmp = sata_srst_pmp(link); 499 struct ata_port *ap = link->ap; 500 struct ahci_host_priv *hpriv = ap->host->private_data; 501 struct xgene_ahci_context *ctx = hpriv->plat_data; 502 void __iomem *port_mmio = ahci_port_base(ap); 503 u32 port_fbs; 504 u32 port_fbs_save; 505 u32 retry = 1; 506 u32 rc; 507 508 port_fbs_save = readl(port_mmio + PORT_FBS); 509 510 /* 511 * Set PxFBS.DEV field with pmp 512 * value. 513 */ 514 port_fbs = readl(port_mmio + PORT_FBS); 515 port_fbs &= ~PORT_FBS_DEV_MASK; 516 port_fbs |= pmp << PORT_FBS_DEV_OFFSET; 517 writel(port_fbs, port_mmio + PORT_FBS); 518 519 softreset_retry: 520 rc = ahci_do_softreset(link, class, pmp, 521 deadline, ahci_check_ready); 522 523 ctx->class[ap->port_no] = *class; 524 if (*class != ATA_DEV_PMP) { 525 /* 526 * Retry for normal drives without 527 * setting PxFBS.DEV field with pmp value. 528 */ 529 if (retry--) { 530 writel(port_fbs_save, port_mmio + PORT_FBS); 531 goto softreset_retry; 532 } 533 } 534 535 return rc; 536 } 537 538 /** 539 * xgene_ahci_handle_broken_edge_irq - Handle the broken irq. 540 * @host: Host that recieved the irq 541 * @irq_masked: HOST_IRQ_STAT value 542 * 543 * For hardware with broken edge trigger latch 544 * the HOST_IRQ_STAT register misses the edge interrupt 545 * when clearing of HOST_IRQ_STAT register and hardware 546 * reporting the PORT_IRQ_STAT register at the 547 * same clock cycle. 548 * As such, the algorithm below outlines the workaround. 549 * 550 * 1. Read HOST_IRQ_STAT register and save the state. 551 * 2. Clear the HOST_IRQ_STAT register. 552 * 3. Read back the HOST_IRQ_STAT register. 553 * 4. If HOST_IRQ_STAT register equals to zero, then 554 * traverse the rest of port's PORT_IRQ_STAT register 555 * to check if an interrupt is triggered at that point else 556 * go to step 6. 557 * 5. If PORT_IRQ_STAT register of rest ports is not equal to zero 558 * then update the state of HOST_IRQ_STAT saved in step 1. 559 * 6. Handle port interrupts. 560 * 7. Exit 561 */ 562 static int xgene_ahci_handle_broken_edge_irq(struct ata_host *host, 563 u32 irq_masked) 564 { 565 struct ahci_host_priv *hpriv = host->private_data; 566 void __iomem *port_mmio; 567 int i; 568 569 if (!readl(hpriv->mmio + HOST_IRQ_STAT)) { 570 for (i = 0; i < host->n_ports; i++) { 571 if (irq_masked & (1 << i)) 572 continue; 573 574 port_mmio = ahci_port_base(host->ports[i]); 575 if (readl(port_mmio + PORT_IRQ_STAT)) 576 irq_masked |= (1 << i); 577 } 578 } 579 580 return ahci_handle_port_intr(host, irq_masked); 581 } 582 583 static irqreturn_t xgene_ahci_irq_intr(int irq, void *dev_instance) 584 { 585 struct ata_host *host = dev_instance; 586 struct ahci_host_priv *hpriv; 587 unsigned int rc = 0; 588 void __iomem *mmio; 589 u32 irq_stat, irq_masked; 590 591 hpriv = host->private_data; 592 mmio = hpriv->mmio; 593 594 /* sigh. 0xffffffff is a valid return from h/w */ 595 irq_stat = readl(mmio + HOST_IRQ_STAT); 596 if (!irq_stat) 597 return IRQ_NONE; 598 599 irq_masked = irq_stat & hpriv->port_map; 600 601 spin_lock(&host->lock); 602 603 /* 604 * HOST_IRQ_STAT behaves as edge triggered latch meaning that 605 * it should be cleared before all the port events are cleared. 606 */ 607 writel(irq_stat, mmio + HOST_IRQ_STAT); 608 609 rc = xgene_ahci_handle_broken_edge_irq(host, irq_masked); 610 611 spin_unlock(&host->lock); 612 613 return IRQ_RETVAL(rc); 614 } 615 616 static struct ata_port_operations xgene_ahci_v1_ops = { 617 .inherits = &ahci_ops, 618 .host_stop = xgene_ahci_host_stop, 619 .hardreset = xgene_ahci_hardreset, 620 .read_id = xgene_ahci_read_id, 621 .qc_issue = xgene_ahci_qc_issue, 622 .softreset = xgene_ahci_softreset, 623 .pmp_softreset = xgene_ahci_pmp_softreset 624 }; 625 626 static const struct ata_port_info xgene_ahci_v1_port_info = { 627 .flags = AHCI_FLAG_COMMON | ATA_FLAG_PMP, 628 .pio_mask = ATA_PIO4, 629 .udma_mask = ATA_UDMA6, 630 .port_ops = &xgene_ahci_v1_ops, 631 }; 632 633 static struct ata_port_operations xgene_ahci_v2_ops = { 634 .inherits = &ahci_ops, 635 .host_stop = xgene_ahci_host_stop, 636 .hardreset = xgene_ahci_hardreset, 637 .read_id = xgene_ahci_read_id, 638 }; 639 640 static const struct ata_port_info xgene_ahci_v2_port_info = { 641 .flags = AHCI_FLAG_COMMON | ATA_FLAG_PMP, 642 .pio_mask = ATA_PIO4, 643 .udma_mask = ATA_UDMA6, 644 .port_ops = &xgene_ahci_v2_ops, 645 }; 646 647 static int xgene_ahci_hw_init(struct ahci_host_priv *hpriv) 648 { 649 struct xgene_ahci_context *ctx = hpriv->plat_data; 650 int i; 651 int rc; 652 u32 val; 653 654 /* Remove IP RAM out of shutdown */ 655 rc = xgene_ahci_init_memram(ctx); 656 if (rc) 657 return rc; 658 659 for (i = 0; i < MAX_AHCI_CHN_PERCTR; i++) 660 xgene_ahci_set_phy_cfg(ctx, i); 661 662 /* AXI disable Mask */ 663 writel(0xffffffff, hpriv->mmio + HOST_IRQ_STAT); 664 readl(hpriv->mmio + HOST_IRQ_STAT); /* Force a barrier */ 665 writel(0, ctx->csr_core + INTSTATUSMASK); 666 val = readl(ctx->csr_core + INTSTATUSMASK); /* Force a barrier */ 667 dev_dbg(ctx->dev, "top level interrupt mask 0x%X value 0x%08X\n", 668 INTSTATUSMASK, val); 669 670 writel(0x0, ctx->csr_core + ERRINTSTATUSMASK); 671 readl(ctx->csr_core + ERRINTSTATUSMASK); /* Force a barrier */ 672 writel(0x0, ctx->csr_axi + INT_SLV_TMOMASK); 673 readl(ctx->csr_axi + INT_SLV_TMOMASK); 674 675 /* Enable AXI Interrupt */ 676 writel(0xffffffff, ctx->csr_core + SLVRDERRATTRIBUTES); 677 writel(0xffffffff, ctx->csr_core + SLVWRERRATTRIBUTES); 678 writel(0xffffffff, ctx->csr_core + MSTRDERRATTRIBUTES); 679 writel(0xffffffff, ctx->csr_core + MSTWRERRATTRIBUTES); 680 681 /* Enable coherency */ 682 val = readl(ctx->csr_core + BUSCTLREG); 683 val &= ~0x00000002; /* Enable write coherency */ 684 val &= ~0x00000001; /* Enable read coherency */ 685 writel(val, ctx->csr_core + BUSCTLREG); 686 687 val = readl(ctx->csr_core + IOFMSTRWAUX); 688 val |= (1 << 3); /* Enable read coherency */ 689 val |= (1 << 9); /* Enable write coherency */ 690 writel(val, ctx->csr_core + IOFMSTRWAUX); 691 val = readl(ctx->csr_core + IOFMSTRWAUX); 692 dev_dbg(ctx->dev, "coherency 0x%X value 0x%08X\n", 693 IOFMSTRWAUX, val); 694 695 return rc; 696 } 697 698 static int xgene_ahci_mux_select(struct xgene_ahci_context *ctx) 699 { 700 u32 val; 701 702 /* Check for optional MUX resource */ 703 if (!ctx->csr_mux) 704 return 0; 705 706 val = readl(ctx->csr_mux + SATA_ENET_CONFIG_REG); 707 val &= ~CFG_SATA_ENET_SELECT_MASK; 708 writel(val, ctx->csr_mux + SATA_ENET_CONFIG_REG); 709 val = readl(ctx->csr_mux + SATA_ENET_CONFIG_REG); 710 return val & CFG_SATA_ENET_SELECT_MASK ? -1 : 0; 711 } 712 713 static struct scsi_host_template ahci_platform_sht = { 714 AHCI_SHT(DRV_NAME), 715 }; 716 717 #ifdef CONFIG_ACPI 718 static const struct acpi_device_id xgene_ahci_acpi_match[] = { 719 { "APMC0D0D", XGENE_AHCI_V1}, 720 { "APMC0D32", XGENE_AHCI_V2}, 721 {}, 722 }; 723 MODULE_DEVICE_TABLE(acpi, xgene_ahci_acpi_match); 724 #endif 725 726 static const struct of_device_id xgene_ahci_of_match[] = { 727 {.compatible = "apm,xgene-ahci", .data = (void *) XGENE_AHCI_V1}, 728 {.compatible = "apm,xgene-ahci-v2", .data = (void *) XGENE_AHCI_V2}, 729 { /* sentinel */ } 730 }; 731 MODULE_DEVICE_TABLE(of, xgene_ahci_of_match); 732 733 static int xgene_ahci_probe(struct platform_device *pdev) 734 { 735 struct device *dev = &pdev->dev; 736 struct ahci_host_priv *hpriv; 737 struct xgene_ahci_context *ctx; 738 struct resource *res; 739 const struct of_device_id *of_devid; 740 enum xgene_ahci_version version = XGENE_AHCI_V1; 741 const struct ata_port_info *ppi[] = { &xgene_ahci_v1_port_info, 742 &xgene_ahci_v2_port_info }; 743 int rc; 744 745 hpriv = ahci_platform_get_resources(pdev, 0); 746 if (IS_ERR(hpriv)) 747 return PTR_ERR(hpriv); 748 749 ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); 750 if (!ctx) 751 return -ENOMEM; 752 753 hpriv->plat_data = ctx; 754 ctx->hpriv = hpriv; 755 ctx->dev = dev; 756 757 /* Retrieve the IP core resource */ 758 res = platform_get_resource(pdev, IORESOURCE_MEM, 1); 759 ctx->csr_core = devm_ioremap_resource(dev, res); 760 if (IS_ERR(ctx->csr_core)) 761 return PTR_ERR(ctx->csr_core); 762 763 /* Retrieve the IP diagnostic resource */ 764 res = platform_get_resource(pdev, IORESOURCE_MEM, 2); 765 ctx->csr_diag = devm_ioremap_resource(dev, res); 766 if (IS_ERR(ctx->csr_diag)) 767 return PTR_ERR(ctx->csr_diag); 768 769 /* Retrieve the IP AXI resource */ 770 res = platform_get_resource(pdev, IORESOURCE_MEM, 3); 771 ctx->csr_axi = devm_ioremap_resource(dev, res); 772 if (IS_ERR(ctx->csr_axi)) 773 return PTR_ERR(ctx->csr_axi); 774 775 /* Retrieve the optional IP mux resource */ 776 res = platform_get_resource(pdev, IORESOURCE_MEM, 4); 777 if (res) { 778 void __iomem *csr = devm_ioremap_resource(dev, res); 779 if (IS_ERR(csr)) 780 return PTR_ERR(csr); 781 782 ctx->csr_mux = csr; 783 } 784 785 of_devid = of_match_device(xgene_ahci_of_match, dev); 786 if (of_devid) { 787 if (of_devid->data) 788 version = (enum xgene_ahci_version) of_devid->data; 789 } 790 #ifdef CONFIG_ACPI 791 else { 792 const struct acpi_device_id *acpi_id; 793 struct acpi_device_info *info; 794 acpi_status status; 795 796 acpi_id = acpi_match_device(xgene_ahci_acpi_match, &pdev->dev); 797 if (!acpi_id) { 798 dev_warn(&pdev->dev, "No node entry in ACPI table. Assume version1\n"); 799 version = XGENE_AHCI_V1; 800 } else if (acpi_id->driver_data) { 801 version = (enum xgene_ahci_version) acpi_id->driver_data; 802 status = acpi_get_object_info(ACPI_HANDLE(&pdev->dev), &info); 803 if (ACPI_FAILURE(status)) { 804 dev_warn(&pdev->dev, "%s: Error reading device info. Assume version1\n", 805 __func__); 806 version = XGENE_AHCI_V1; 807 } else { 808 if (info->valid & ACPI_VALID_CID) 809 version = XGENE_AHCI_V2; 810 kfree(info); 811 } 812 } 813 } 814 #endif 815 816 dev_dbg(dev, "VAddr 0x%p Mmio VAddr 0x%p\n", ctx->csr_core, 817 hpriv->mmio); 818 819 /* Select ATA */ 820 if ((rc = xgene_ahci_mux_select(ctx))) { 821 dev_err(dev, "SATA mux selection failed error %d\n", rc); 822 return -ENODEV; 823 } 824 825 if (xgene_ahci_is_memram_inited(ctx)) { 826 dev_info(dev, "skip clock and PHY initialization\n"); 827 goto skip_clk_phy; 828 } 829 830 /* Due to errata, HW requires full toggle transition */ 831 rc = ahci_platform_enable_clks(hpriv); 832 if (rc) 833 goto disable_resources; 834 ahci_platform_disable_clks(hpriv); 835 836 rc = ahci_platform_enable_resources(hpriv); 837 if (rc) 838 goto disable_resources; 839 840 /* Configure the host controller */ 841 xgene_ahci_hw_init(hpriv); 842 skip_clk_phy: 843 844 switch (version) { 845 case XGENE_AHCI_V1: 846 hpriv->flags = AHCI_HFLAG_NO_NCQ; 847 break; 848 case XGENE_AHCI_V2: 849 hpriv->flags |= AHCI_HFLAG_YES_FBS; 850 hpriv->irq_handler = xgene_ahci_irq_intr; 851 break; 852 default: 853 break; 854 } 855 856 rc = ahci_platform_init_host(pdev, hpriv, ppi[version - 1], 857 &ahci_platform_sht); 858 if (rc) 859 goto disable_resources; 860 861 dev_dbg(dev, "X-Gene SATA host controller initialized\n"); 862 return 0; 863 864 disable_resources: 865 ahci_platform_disable_resources(hpriv); 866 return rc; 867 } 868 869 static struct platform_driver xgene_ahci_driver = { 870 .probe = xgene_ahci_probe, 871 .remove = ata_platform_remove_one, 872 .driver = { 873 .name = DRV_NAME, 874 .of_match_table = xgene_ahci_of_match, 875 .acpi_match_table = ACPI_PTR(xgene_ahci_acpi_match), 876 }, 877 }; 878 879 module_platform_driver(xgene_ahci_driver); 880 881 MODULE_DESCRIPTION("APM X-Gene AHCI SATA driver"); 882 MODULE_AUTHOR("Loc Ho <lho@apm.com>"); 883 MODULE_LICENSE("GPL"); 884 MODULE_VERSION("0.4"); 885