1/* SPDX-License-Identifier: GPL-2.0 */ 2/* 3 * linux/arch/x86/kernel/head_64.S -- start in 32bit and switch to 64bit 4 * 5 * Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE 6 * Copyright (C) 2000 Pavel Machek <pavel@suse.cz> 7 * Copyright (C) 2000 Karsten Keil <kkeil@suse.de> 8 * Copyright (C) 2001,2002 Andi Kleen <ak@suse.de> 9 * Copyright (C) 2005 Eric Biederman <ebiederm@xmission.com> 10 */ 11 12 13#include <linux/linkage.h> 14#include <linux/threads.h> 15#include <linux/init.h> 16#include <linux/pgtable.h> 17#include <asm/segment.h> 18#include <asm/page.h> 19#include <asm/msr.h> 20#include <asm/cache.h> 21#include <asm/processor-flags.h> 22#include <asm/percpu.h> 23#include <asm/nops.h> 24#include "../entry/calling.h" 25#include <asm/export.h> 26#include <asm/nospec-branch.h> 27#include <asm/fixmap.h> 28 29#ifdef CONFIG_PARAVIRT_XXL 30#include <asm/asm-offsets.h> 31#include <asm/paravirt.h> 32#define GET_CR2_INTO(reg) GET_CR2_INTO_AX ; _ASM_MOV %_ASM_AX, reg 33#else 34#define INTERRUPT_RETURN iretq 35#define GET_CR2_INTO(reg) _ASM_MOV %cr2, reg 36#endif 37 38/* 39 * We are not able to switch in one step to the final KERNEL ADDRESS SPACE 40 * because we need identity-mapped pages. 41 */ 42#define l4_index(x) (((x) >> 39) & 511) 43#define pud_index(x) (((x) >> PUD_SHIFT) & (PTRS_PER_PUD-1)) 44 45L4_PAGE_OFFSET = l4_index(__PAGE_OFFSET_BASE_L4) 46L4_START_KERNEL = l4_index(__START_KERNEL_map) 47 48L3_START_KERNEL = pud_index(__START_KERNEL_map) 49 50 .text 51 __HEAD 52 .code64 53SYM_CODE_START_NOALIGN(startup_64) 54 UNWIND_HINT_EMPTY 55 /* 56 * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 0, 57 * and someone has loaded an identity mapped page table 58 * for us. These identity mapped page tables map all of the 59 * kernel pages and possibly all of memory. 60 * 61 * %rsi holds a physical pointer to real_mode_data. 62 * 63 * We come here either directly from a 64bit bootloader, or from 64 * arch/x86/boot/compressed/head_64.S. 65 * 66 * We only come here initially at boot nothing else comes here. 67 * 68 * Since we may be loaded at an address different from what we were 69 * compiled to run at we first fixup the physical addresses in our page 70 * tables and then reload them. 71 */ 72 73 /* Set up the stack for verify_cpu(), similar to initial_stack below */ 74 leaq (__end_init_task - SIZEOF_PTREGS)(%rip), %rsp 75 76 leaq _text(%rip), %rdi 77 pushq %rsi 78 call startup_64_setup_env 79 popq %rsi 80 81 /* Now switch to __KERNEL_CS so IRET works reliably */ 82 pushq $__KERNEL_CS 83 leaq .Lon_kernel_cs(%rip), %rax 84 pushq %rax 85 lretq 86 87.Lon_kernel_cs: 88 UNWIND_HINT_EMPTY 89 90 /* Sanitize CPU configuration */ 91 call verify_cpu 92 93 /* 94 * Perform pagetable fixups. Additionally, if SME is active, encrypt 95 * the kernel and retrieve the modifier (SME encryption mask if SME 96 * is active) to be added to the initial pgdir entry that will be 97 * programmed into CR3. 98 */ 99 leaq _text(%rip), %rdi 100 pushq %rsi 101 call __startup_64 102 popq %rsi 103 104 /* Form the CR3 value being sure to include the CR3 modifier */ 105 addq $(early_top_pgt - __START_KERNEL_map), %rax 106 jmp 1f 107SYM_CODE_END(startup_64) 108 109SYM_CODE_START(secondary_startup_64) 110 UNWIND_HINT_EMPTY 111 /* 112 * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 0, 113 * and someone has loaded a mapped page table. 114 * 115 * %rsi holds a physical pointer to real_mode_data. 116 * 117 * We come here either from startup_64 (using physical addresses) 118 * or from trampoline.S (using virtual addresses). 119 * 120 * Using virtual addresses from trampoline.S removes the need 121 * to have any identity mapped pages in the kernel page table 122 * after the boot processor executes this code. 123 */ 124 125 /* Sanitize CPU configuration */ 126 call verify_cpu 127 128 /* 129 * Retrieve the modifier (SME encryption mask if SME is active) to be 130 * added to the initial pgdir entry that will be programmed into CR3. 131 */ 132 pushq %rsi 133 call __startup_secondary_64 134 popq %rsi 135 136 /* Form the CR3 value being sure to include the CR3 modifier */ 137 addq $(init_top_pgt - __START_KERNEL_map), %rax 1381: 139 140 /* Enable PAE mode, PGE and LA57 */ 141 movl $(X86_CR4_PAE | X86_CR4_PGE), %ecx 142#ifdef CONFIG_X86_5LEVEL 143 testl $1, __pgtable_l5_enabled(%rip) 144 jz 1f 145 orl $X86_CR4_LA57, %ecx 1461: 147#endif 148 movq %rcx, %cr4 149 150 /* Setup early boot stage 4-/5-level pagetables. */ 151 addq phys_base(%rip), %rax 152 movq %rax, %cr3 153 154 /* Ensure I am executing from virtual addresses */ 155 movq $1f, %rax 156 ANNOTATE_RETPOLINE_SAFE 157 jmp *%rax 1581: 159 UNWIND_HINT_EMPTY 160 161 /* 162 * We must switch to a new descriptor in kernel space for the GDT 163 * because soon the kernel won't have access anymore to the userspace 164 * addresses where we're currently running on. We have to do that here 165 * because in 32bit we couldn't load a 64bit linear address. 166 */ 167 lgdt early_gdt_descr(%rip) 168 169 /* set up data segments */ 170 xorl %eax,%eax 171 movl %eax,%ds 172 movl %eax,%ss 173 movl %eax,%es 174 175 /* 176 * We don't really need to load %fs or %gs, but load them anyway 177 * to kill any stale realmode selectors. This allows execution 178 * under VT hardware. 179 */ 180 movl %eax,%fs 181 movl %eax,%gs 182 183 /* Set up %gs. 184 * 185 * The base of %gs always points to fixed_percpu_data. If the 186 * stack protector canary is enabled, it is located at %gs:40. 187 * Note that, on SMP, the boot cpu uses init data section until 188 * the per cpu areas are set up. 189 */ 190 movl $MSR_GS_BASE,%ecx 191 movl initial_gs(%rip),%eax 192 movl initial_gs+4(%rip),%edx 193 wrmsr 194 195 /* 196 * Setup a boot time stack - Any secondary CPU will have lost its stack 197 * by now because the cr3-switch above unmaps the real-mode stack 198 */ 199 movq initial_stack(%rip), %rsp 200 201 /* Setup and Load IDT */ 202 pushq %rsi 203 call early_setup_idt 204 popq %rsi 205 206 /* Check if nx is implemented */ 207 movl $0x80000001, %eax 208 cpuid 209 movl %edx,%edi 210 211 /* Setup EFER (Extended Feature Enable Register) */ 212 movl $MSR_EFER, %ecx 213 rdmsr 214 btsl $_EFER_SCE, %eax /* Enable System Call */ 215 btl $20,%edi /* No Execute supported? */ 216 jnc 1f 217 btsl $_EFER_NX, %eax 218 btsq $_PAGE_BIT_NX,early_pmd_flags(%rip) 2191: wrmsr /* Make changes effective */ 220 221 /* Setup cr0 */ 222 movl $CR0_STATE, %eax 223 /* Make changes effective */ 224 movq %rax, %cr0 225 226 /* zero EFLAGS after setting rsp */ 227 pushq $0 228 popfq 229 230 /* rsi is pointer to real mode structure with interesting info. 231 pass it to C */ 232 movq %rsi, %rdi 233 234.Ljump_to_C_code: 235 /* 236 * Jump to run C code and to be on a real kernel address. 237 * Since we are running on identity-mapped space we have to jump 238 * to the full 64bit address, this is only possible as indirect 239 * jump. In addition we need to ensure %cs is set so we make this 240 * a far return. 241 * 242 * Note: do not change to far jump indirect with 64bit offset. 243 * 244 * AMD does not support far jump indirect with 64bit offset. 245 * AMD64 Architecture Programmer's Manual, Volume 3: states only 246 * JMP FAR mem16:16 FF /5 Far jump indirect, 247 * with the target specified by a far pointer in memory. 248 * JMP FAR mem16:32 FF /5 Far jump indirect, 249 * with the target specified by a far pointer in memory. 250 * 251 * Intel64 does support 64bit offset. 252 * Software Developer Manual Vol 2: states: 253 * FF /5 JMP m16:16 Jump far, absolute indirect, 254 * address given in m16:16 255 * FF /5 JMP m16:32 Jump far, absolute indirect, 256 * address given in m16:32. 257 * REX.W + FF /5 JMP m16:64 Jump far, absolute indirect, 258 * address given in m16:64. 259 */ 260 pushq $.Lafter_lret # put return address on stack for unwinder 261 xorl %ebp, %ebp # clear frame pointer 262 movq initial_code(%rip), %rax 263 pushq $__KERNEL_CS # set correct cs 264 pushq %rax # target address in negative space 265 lretq 266.Lafter_lret: 267SYM_CODE_END(secondary_startup_64) 268 269#include "verify_cpu.S" 270 271#ifdef CONFIG_HOTPLUG_CPU 272/* 273 * Boot CPU0 entry point. It's called from play_dead(). Everything has been set 274 * up already except stack. We just set up stack here. Then call 275 * start_secondary() via .Ljump_to_C_code. 276 */ 277SYM_CODE_START(start_cpu0) 278 UNWIND_HINT_EMPTY 279 movq initial_stack(%rip), %rsp 280 jmp .Ljump_to_C_code 281SYM_CODE_END(start_cpu0) 282#endif 283 284 /* Both SMP bootup and ACPI suspend change these variables */ 285 __REFDATA 286 .balign 8 287SYM_DATA(initial_code, .quad x86_64_start_kernel) 288SYM_DATA(initial_gs, .quad INIT_PER_CPU_VAR(fixed_percpu_data)) 289 290/* 291 * The SIZEOF_PTREGS gap is a convention which helps the in-kernel unwinder 292 * reliably detect the end of the stack. 293 */ 294SYM_DATA(initial_stack, .quad init_thread_union + THREAD_SIZE - SIZEOF_PTREGS) 295 __FINITDATA 296 297 __INIT 298SYM_CODE_START(early_idt_handler_array) 299 i = 0 300 .rept NUM_EXCEPTION_VECTORS 301 .if ((EXCEPTION_ERRCODE_MASK >> i) & 1) == 0 302 UNWIND_HINT_IRET_REGS 303 pushq $0 # Dummy error code, to make stack frame uniform 304 .else 305 UNWIND_HINT_IRET_REGS offset=8 306 .endif 307 pushq $i # 72(%rsp) Vector number 308 jmp early_idt_handler_common 309 UNWIND_HINT_IRET_REGS 310 i = i + 1 311 .fill early_idt_handler_array + i*EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc 312 .endr 313 UNWIND_HINT_IRET_REGS offset=16 314SYM_CODE_END(early_idt_handler_array) 315 316SYM_CODE_START_LOCAL(early_idt_handler_common) 317 /* 318 * The stack is the hardware frame, an error code or zero, and the 319 * vector number. 320 */ 321 cld 322 323 incl early_recursion_flag(%rip) 324 325 /* The vector number is currently in the pt_regs->di slot. */ 326 pushq %rsi /* pt_regs->si */ 327 movq 8(%rsp), %rsi /* RSI = vector number */ 328 movq %rdi, 8(%rsp) /* pt_regs->di = RDI */ 329 pushq %rdx /* pt_regs->dx */ 330 pushq %rcx /* pt_regs->cx */ 331 pushq %rax /* pt_regs->ax */ 332 pushq %r8 /* pt_regs->r8 */ 333 pushq %r9 /* pt_regs->r9 */ 334 pushq %r10 /* pt_regs->r10 */ 335 pushq %r11 /* pt_regs->r11 */ 336 pushq %rbx /* pt_regs->bx */ 337 pushq %rbp /* pt_regs->bp */ 338 pushq %r12 /* pt_regs->r12 */ 339 pushq %r13 /* pt_regs->r13 */ 340 pushq %r14 /* pt_regs->r14 */ 341 pushq %r15 /* pt_regs->r15 */ 342 UNWIND_HINT_REGS 343 344 movq %rsp,%rdi /* RDI = pt_regs; RSI is already trapnr */ 345 call do_early_exception 346 347 decl early_recursion_flag(%rip) 348 jmp restore_regs_and_return_to_kernel 349SYM_CODE_END(early_idt_handler_common) 350 351 352#define SYM_DATA_START_PAGE_ALIGNED(name) \ 353 SYM_START(name, SYM_L_GLOBAL, .balign PAGE_SIZE) 354 355#ifdef CONFIG_PAGE_TABLE_ISOLATION 356/* 357 * Each PGD needs to be 8k long and 8k aligned. We do not 358 * ever go out to userspace with these, so we do not 359 * strictly *need* the second page, but this allows us to 360 * have a single set_pgd() implementation that does not 361 * need to worry about whether it has 4k or 8k to work 362 * with. 363 * 364 * This ensures PGDs are 8k long: 365 */ 366#define PTI_USER_PGD_FILL 512 367/* This ensures they are 8k-aligned: */ 368#define SYM_DATA_START_PTI_ALIGNED(name) \ 369 SYM_START(name, SYM_L_GLOBAL, .balign 2 * PAGE_SIZE) 370#else 371#define SYM_DATA_START_PTI_ALIGNED(name) \ 372 SYM_DATA_START_PAGE_ALIGNED(name) 373#define PTI_USER_PGD_FILL 0 374#endif 375 376/* Automate the creation of 1 to 1 mapping pmd entries */ 377#define PMDS(START, PERM, COUNT) \ 378 i = 0 ; \ 379 .rept (COUNT) ; \ 380 .quad (START) + (i << PMD_SHIFT) + (PERM) ; \ 381 i = i + 1 ; \ 382 .endr 383 384 __INITDATA 385 .balign 4 386 387SYM_DATA_START_PTI_ALIGNED(early_top_pgt) 388 .fill 512,8,0 389 .fill PTI_USER_PGD_FILL,8,0 390SYM_DATA_END(early_top_pgt) 391 392SYM_DATA_START_PAGE_ALIGNED(early_dynamic_pgts) 393 .fill 512*EARLY_DYNAMIC_PAGE_TABLES,8,0 394SYM_DATA_END(early_dynamic_pgts) 395 396SYM_DATA(early_recursion_flag, .long 0) 397 398 .data 399 400#if defined(CONFIG_XEN_PV) || defined(CONFIG_PVH) 401SYM_DATA_START_PTI_ALIGNED(init_top_pgt) 402 .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE_NOENC 403 .org init_top_pgt + L4_PAGE_OFFSET*8, 0 404 .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE_NOENC 405 .org init_top_pgt + L4_START_KERNEL*8, 0 406 /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */ 407 .quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC 408 .fill PTI_USER_PGD_FILL,8,0 409SYM_DATA_END(init_top_pgt) 410 411SYM_DATA_START_PAGE_ALIGNED(level3_ident_pgt) 412 .quad level2_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE_NOENC 413 .fill 511, 8, 0 414SYM_DATA_END(level3_ident_pgt) 415SYM_DATA_START_PAGE_ALIGNED(level2_ident_pgt) 416 /* 417 * Since I easily can, map the first 1G. 418 * Don't set NX because code runs from these pages. 419 * 420 * Note: This sets _PAGE_GLOBAL despite whether 421 * the CPU supports it or it is enabled. But, 422 * the CPU should ignore the bit. 423 */ 424 PMDS(0, __PAGE_KERNEL_IDENT_LARGE_EXEC, PTRS_PER_PMD) 425SYM_DATA_END(level2_ident_pgt) 426#else 427SYM_DATA_START_PTI_ALIGNED(init_top_pgt) 428 .fill 512,8,0 429 .fill PTI_USER_PGD_FILL,8,0 430SYM_DATA_END(init_top_pgt) 431#endif 432 433#ifdef CONFIG_X86_5LEVEL 434SYM_DATA_START_PAGE_ALIGNED(level4_kernel_pgt) 435 .fill 511,8,0 436 .quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC 437SYM_DATA_END(level4_kernel_pgt) 438#endif 439 440SYM_DATA_START_PAGE_ALIGNED(level3_kernel_pgt) 441 .fill L3_START_KERNEL,8,0 442 /* (2^48-(2*1024*1024*1024)-((2^39)*511))/(2^30) = 510 */ 443 .quad level2_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE_NOENC 444 .quad level2_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC 445SYM_DATA_END(level3_kernel_pgt) 446 447SYM_DATA_START_PAGE_ALIGNED(level2_kernel_pgt) 448 /* 449 * 512 MB kernel mapping. We spend a full page on this pagetable 450 * anyway. 451 * 452 * The kernel code+data+bss must not be bigger than that. 453 * 454 * (NOTE: at +512MB starts the module area, see MODULES_VADDR. 455 * If you want to increase this then increase MODULES_VADDR 456 * too.) 457 * 458 * This table is eventually used by the kernel during normal 459 * runtime. Care must be taken to clear out undesired bits 460 * later, like _PAGE_RW or _PAGE_GLOBAL in some cases. 461 */ 462 PMDS(0, __PAGE_KERNEL_LARGE_EXEC, 463 KERNEL_IMAGE_SIZE/PMD_SIZE) 464SYM_DATA_END(level2_kernel_pgt) 465 466SYM_DATA_START_PAGE_ALIGNED(level2_fixmap_pgt) 467 .fill (512 - 4 - FIXMAP_PMD_NUM),8,0 468 pgtno = 0 469 .rept (FIXMAP_PMD_NUM) 470 .quad level1_fixmap_pgt + (pgtno << PAGE_SHIFT) - __START_KERNEL_map \ 471 + _PAGE_TABLE_NOENC; 472 pgtno = pgtno + 1 473 .endr 474 /* 6 MB reserved space + a 2MB hole */ 475 .fill 4,8,0 476SYM_DATA_END(level2_fixmap_pgt) 477 478SYM_DATA_START_PAGE_ALIGNED(level1_fixmap_pgt) 479 .rept (FIXMAP_PMD_NUM) 480 .fill 512,8,0 481 .endr 482SYM_DATA_END(level1_fixmap_pgt) 483 484#undef PMDS 485 486 .data 487 .align 16 488 489SYM_DATA(early_gdt_descr, .word GDT_ENTRIES*8-1) 490SYM_DATA_LOCAL(early_gdt_descr_base, .quad INIT_PER_CPU_VAR(gdt_page)) 491 492 .align 16 493/* This must match the first entry in level2_kernel_pgt */ 494SYM_DATA(phys_base, .quad 0x0) 495EXPORT_SYMBOL(phys_base) 496 497#include "../../x86/xen/xen-head.S" 498 499 __PAGE_ALIGNED_BSS 500SYM_DATA_START_PAGE_ALIGNED(empty_zero_page) 501 .skip PAGE_SIZE 502SYM_DATA_END(empty_zero_page) 503EXPORT_SYMBOL(empty_zero_page) 504 505