1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * SMP support for PowerNV machines.
4 *
5 * Copyright 2011 IBM Corp.
6 */
7
8 #include <linux/kernel.h>
9 #include <linux/module.h>
10 #include <linux/sched.h>
11 #include <linux/sched/hotplug.h>
12 #include <linux/smp.h>
13 #include <linux/interrupt.h>
14 #include <linux/delay.h>
15 #include <linux/init.h>
16 #include <linux/spinlock.h>
17 #include <linux/cpu.h>
18
19 #include <asm/irq.h>
20 #include <asm/smp.h>
21 #include <asm/paca.h>
22 #include <asm/machdep.h>
23 #include <asm/cputable.h>
24 #include <asm/firmware.h>
25 #include <asm/vdso_datapage.h>
26 #include <asm/cputhreads.h>
27 #include <asm/xics.h>
28 #include <asm/xive.h>
29 #include <asm/opal.h>
30 #include <asm/runlatch.h>
31 #include <asm/code-patching.h>
32 #include <asm/dbell.h>
33 #include <asm/kvm_ppc.h>
34 #include <asm/ppc-opcode.h>
35 #include <asm/cpuidle.h>
36 #include <asm/kexec.h>
37 #include <asm/reg.h>
38 #include <asm/powernv.h>
39
40 #include "powernv.h"
41
42 #ifdef DEBUG
43 #include <asm/udbg.h>
44 #define DBG(fmt...) udbg_printf(fmt)
45 #else
46 #define DBG(fmt...) do { } while (0)
47 #endif
48
pnv_smp_setup_cpu(int cpu)49 static void pnv_smp_setup_cpu(int cpu)
50 {
51 /*
52 * P9 workaround for CI vector load (see traps.c),
53 * enable the corresponding HMI interrupt
54 */
55 if (pvr_version_is(PVR_POWER9))
56 mtspr(SPRN_HMEER, mfspr(SPRN_HMEER) | PPC_BIT(17));
57
58 if (xive_enabled())
59 xive_smp_setup_cpu();
60 else if (cpu != boot_cpuid)
61 xics_setup_cpu();
62 }
63
pnv_smp_kick_cpu(int nr)64 static int pnv_smp_kick_cpu(int nr)
65 {
66 unsigned int pcpu;
67 unsigned long start_here =
68 __pa(ppc_function_entry(generic_secondary_smp_init));
69 long rc;
70 uint8_t status;
71
72 if (nr < 0 || nr >= nr_cpu_ids)
73 return -EINVAL;
74
75 pcpu = get_hard_smp_processor_id(nr);
76 /*
77 * If we already started or OPAL is not supported, we just
78 * kick the CPU via the PACA
79 */
80 if (paca_ptrs[nr]->cpu_start || !firmware_has_feature(FW_FEATURE_OPAL))
81 goto kick;
82
83 /*
84 * At this point, the CPU can either be spinning on the way in
85 * from kexec or be inside OPAL waiting to be started for the
86 * first time. OPAL v3 allows us to query OPAL to know if it
87 * has the CPUs, so we do that
88 */
89 rc = opal_query_cpu_status(pcpu, &status);
90 if (rc != OPAL_SUCCESS) {
91 pr_warn("OPAL Error %ld querying CPU %d state\n", rc, nr);
92 return -ENODEV;
93 }
94
95 /*
96 * Already started, just kick it, probably coming from
97 * kexec and spinning
98 */
99 if (status == OPAL_THREAD_STARTED)
100 goto kick;
101
102 /*
103 * Available/inactive, let's kick it
104 */
105 if (status == OPAL_THREAD_INACTIVE) {
106 pr_devel("OPAL: Starting CPU %d (HW 0x%x)...\n", nr, pcpu);
107 rc = opal_start_cpu(pcpu, start_here);
108 if (rc != OPAL_SUCCESS) {
109 pr_warn("OPAL Error %ld starting CPU %d\n", rc, nr);
110 return -ENODEV;
111 }
112 } else {
113 /*
114 * An unavailable CPU (or any other unknown status)
115 * shouldn't be started. It should also
116 * not be in the possible map but currently it can
117 * happen
118 */
119 pr_devel("OPAL: CPU %d (HW 0x%x) is unavailable"
120 " (status %d)...\n", nr, pcpu, status);
121 return -ENODEV;
122 }
123
124 kick:
125 return smp_generic_kick_cpu(nr);
126 }
127
128 #ifdef CONFIG_HOTPLUG_CPU
129
pnv_smp_cpu_disable(void)130 static int pnv_smp_cpu_disable(void)
131 {
132 int cpu = smp_processor_id();
133
134 /* This is identical to pSeries... might consolidate by
135 * moving migrate_irqs_away to a ppc_md with default to
136 * the generic fixup_irqs. --BenH.
137 */
138 set_cpu_online(cpu, false);
139 vdso_data->processorCount--;
140 if (cpu == boot_cpuid)
141 boot_cpuid = cpumask_any(cpu_online_mask);
142 if (xive_enabled())
143 xive_smp_disable_cpu();
144 else
145 xics_migrate_irqs_away();
146
147 cleanup_cpu_mmu_context();
148
149 return 0;
150 }
151
pnv_flush_interrupts(void)152 static void pnv_flush_interrupts(void)
153 {
154 if (cpu_has_feature(CPU_FTR_ARCH_300)) {
155 if (xive_enabled())
156 xive_flush_interrupt();
157 else
158 icp_opal_flush_interrupt();
159 } else {
160 icp_native_flush_interrupt();
161 }
162 }
163
pnv_cpu_offline_self(void)164 static void pnv_cpu_offline_self(void)
165 {
166 unsigned long srr1, unexpected_mask, wmask;
167 unsigned int cpu;
168 u64 lpcr_val;
169
170 /* Standard hot unplug procedure */
171
172 idle_task_exit();
173 cpu = smp_processor_id();
174 DBG("CPU%d offline\n", cpu);
175 generic_set_cpu_dead(cpu);
176 smp_wmb();
177
178 wmask = SRR1_WAKEMASK;
179 if (cpu_has_feature(CPU_FTR_ARCH_207S))
180 wmask = SRR1_WAKEMASK_P8;
181
182 /*
183 * This turns the irq soft-disabled state we're called with, into a
184 * hard-disabled state with pending irq_happened interrupts cleared.
185 *
186 * PACA_IRQ_DEC - Decrementer should be ignored.
187 * PACA_IRQ_HMI - Can be ignored, processing is done in real mode.
188 * PACA_IRQ_DBELL, EE, PMI - Unexpected.
189 */
190 hard_irq_disable();
191 if (generic_check_cpu_restart(cpu))
192 goto out;
193
194 unexpected_mask = ~(PACA_IRQ_DEC | PACA_IRQ_HMI | PACA_IRQ_HARD_DIS);
195 if (local_paca->irq_happened & unexpected_mask) {
196 if (local_paca->irq_happened & PACA_IRQ_EE)
197 pnv_flush_interrupts();
198 DBG("CPU%d Unexpected exit while offline irq_happened=%lx!\n",
199 cpu, local_paca->irq_happened);
200 }
201 local_paca->irq_happened = PACA_IRQ_HARD_DIS;
202
203 /*
204 * We don't want to take decrementer interrupts while we are
205 * offline, so clear LPCR:PECE1. We keep PECE2 (and
206 * LPCR_PECE_HVEE on P9) enabled so as to let IPIs in.
207 *
208 * If the CPU gets woken up by a special wakeup, ensure that
209 * the SLW engine sets LPCR with decrementer bit cleared, else
210 * the CPU will come back to the kernel due to a spurious
211 * wakeup.
212 */
213 lpcr_val = mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1;
214 pnv_program_cpu_hotplug_lpcr(cpu, lpcr_val);
215
216 while (!generic_check_cpu_restart(cpu)) {
217 /*
218 * Clear IPI flag, since we don't handle IPIs while
219 * offline, except for those when changing micro-threading
220 * mode, which are handled explicitly below, and those
221 * for coming online, which are handled via
222 * generic_check_cpu_restart() calls.
223 */
224 kvmppc_clear_host_ipi(cpu);
225
226 srr1 = pnv_cpu_offline(cpu);
227
228 WARN_ON_ONCE(!irqs_disabled());
229 WARN_ON(lazy_irq_pending());
230
231 /*
232 * If the SRR1 value indicates that we woke up due to
233 * an external interrupt, then clear the interrupt.
234 * We clear the interrupt before checking for the
235 * reason, so as to avoid a race where we wake up for
236 * some other reason, find nothing and clear the interrupt
237 * just as some other cpu is sending us an interrupt.
238 * If we returned from power7_nap as a result of
239 * having finished executing in a KVM guest, then srr1
240 * contains 0.
241 */
242 if (((srr1 & wmask) == SRR1_WAKEEE) ||
243 ((srr1 & wmask) == SRR1_WAKEHVI)) {
244 pnv_flush_interrupts();
245 } else if ((srr1 & wmask) == SRR1_WAKEHDBELL) {
246 unsigned long msg = PPC_DBELL_TYPE(PPC_DBELL_SERVER);
247 asm volatile(PPC_MSGCLR(%0) : : "r" (msg));
248 } else if ((srr1 & wmask) == SRR1_WAKERESET) {
249 irq_set_pending_from_srr1(srr1);
250 /* Does not return */
251 }
252
253 smp_mb();
254
255 /*
256 * For kdump kernels, we process the ipi and jump to
257 * crash_ipi_callback
258 */
259 if (kdump_in_progress()) {
260 /*
261 * If we got to this point, we've not used
262 * NMI's, otherwise we would have gone
263 * via the SRR1_WAKERESET path. We are
264 * using regular IPI's for waking up offline
265 * threads.
266 */
267 struct pt_regs regs;
268
269 ppc_save_regs(®s);
270 crash_ipi_callback(®s);
271 /* Does not return */
272 }
273
274 if (cpu_core_split_required())
275 continue;
276
277 if (srr1 && !generic_check_cpu_restart(cpu))
278 DBG("CPU%d Unexpected exit while offline srr1=%lx!\n",
279 cpu, srr1);
280
281 }
282
283 /*
284 * Re-enable decrementer interrupts in LPCR.
285 *
286 * Further, we want stop states to be woken up by decrementer
287 * for non-hotplug cases. So program the LPCR via stop api as
288 * well.
289 */
290 lpcr_val = mfspr(SPRN_LPCR) | (u64)LPCR_PECE1;
291 pnv_program_cpu_hotplug_lpcr(cpu, lpcr_val);
292 out:
293 DBG("CPU%d coming online...\n", cpu);
294 }
295
296 #endif /* CONFIG_HOTPLUG_CPU */
297
pnv_cpu_bootable(unsigned int nr)298 static int pnv_cpu_bootable(unsigned int nr)
299 {
300 /*
301 * Starting with POWER8, the subcore logic relies on all threads of a
302 * core being booted so that they can participate in split mode
303 * switches. So on those machines we ignore the smt_enabled_at_boot
304 * setting (smt-enabled on the kernel command line).
305 */
306 if (cpu_has_feature(CPU_FTR_ARCH_207S))
307 return 1;
308
309 return smp_generic_cpu_bootable(nr);
310 }
311
pnv_smp_prepare_cpu(int cpu)312 static int pnv_smp_prepare_cpu(int cpu)
313 {
314 if (xive_enabled())
315 return xive_smp_prepare_cpu(cpu);
316 return 0;
317 }
318
319 /* Cause IPI as setup by the interrupt controller (xics or xive) */
320 static void (*ic_cause_ipi)(int cpu);
321
pnv_cause_ipi(int cpu)322 static void pnv_cause_ipi(int cpu)
323 {
324 if (doorbell_try_core_ipi(cpu))
325 return;
326
327 ic_cause_ipi(cpu);
328 }
329
pnv_smp_probe(void)330 static void __init pnv_smp_probe(void)
331 {
332 if (xive_enabled())
333 xive_smp_probe();
334 else
335 xics_smp_probe();
336
337 if (cpu_has_feature(CPU_FTR_DBELL)) {
338 ic_cause_ipi = smp_ops->cause_ipi;
339 WARN_ON(!ic_cause_ipi);
340
341 if (cpu_has_feature(CPU_FTR_ARCH_300))
342 smp_ops->cause_ipi = doorbell_global_ipi;
343 else
344 smp_ops->cause_ipi = pnv_cause_ipi;
345 }
346 }
347
pnv_system_reset_exception(struct pt_regs * regs)348 noinstr static int pnv_system_reset_exception(struct pt_regs *regs)
349 {
350 if (smp_handle_nmi_ipi(regs))
351 return 1;
352 return 0;
353 }
354
pnv_cause_nmi_ipi(int cpu)355 static int pnv_cause_nmi_ipi(int cpu)
356 {
357 int64_t rc;
358
359 if (cpu >= 0) {
360 int h = get_hard_smp_processor_id(cpu);
361
362 if (opal_check_token(OPAL_QUIESCE))
363 opal_quiesce(QUIESCE_HOLD, h);
364
365 rc = opal_signal_system_reset(h);
366
367 if (opal_check_token(OPAL_QUIESCE))
368 opal_quiesce(QUIESCE_RESUME, h);
369
370 if (rc != OPAL_SUCCESS)
371 return 0;
372 return 1;
373
374 } else if (cpu == NMI_IPI_ALL_OTHERS) {
375 bool success = true;
376 int c;
377
378 if (opal_check_token(OPAL_QUIESCE))
379 opal_quiesce(QUIESCE_HOLD, -1);
380
381 /*
382 * We do not use broadcasts (yet), because it's not clear
383 * exactly what semantics Linux wants or the firmware should
384 * provide.
385 */
386 for_each_online_cpu(c) {
387 if (c == smp_processor_id())
388 continue;
389
390 rc = opal_signal_system_reset(
391 get_hard_smp_processor_id(c));
392 if (rc != OPAL_SUCCESS)
393 success = false;
394 }
395
396 if (opal_check_token(OPAL_QUIESCE))
397 opal_quiesce(QUIESCE_RESUME, -1);
398
399 if (success)
400 return 1;
401
402 /*
403 * Caller will fall back to doorbells, which may pick
404 * up the remainders.
405 */
406 }
407
408 return 0;
409 }
410
411 static struct smp_ops_t pnv_smp_ops = {
412 .message_pass = NULL, /* Use smp_muxed_ipi_message_pass */
413 .cause_ipi = NULL, /* Filled at runtime by pnv_smp_probe() */
414 .cause_nmi_ipi = NULL,
415 .probe = pnv_smp_probe,
416 .prepare_cpu = pnv_smp_prepare_cpu,
417 .kick_cpu = pnv_smp_kick_cpu,
418 .setup_cpu = pnv_smp_setup_cpu,
419 .cpu_bootable = pnv_cpu_bootable,
420 #ifdef CONFIG_HOTPLUG_CPU
421 .cpu_disable = pnv_smp_cpu_disable,
422 .cpu_die = generic_cpu_die,
423 .cpu_offline_self = pnv_cpu_offline_self,
424 #endif /* CONFIG_HOTPLUG_CPU */
425 };
426
427 /* This is called very early during platform setup_arch */
pnv_smp_init(void)428 void __init pnv_smp_init(void)
429 {
430 if (opal_check_token(OPAL_SIGNAL_SYSTEM_RESET)) {
431 ppc_md.system_reset_exception = pnv_system_reset_exception;
432 pnv_smp_ops.cause_nmi_ipi = pnv_cause_nmi_ipi;
433 }
434 smp_ops = &pnv_smp_ops;
435
436 #ifdef CONFIG_HOTPLUG_CPU
437 #ifdef CONFIG_KEXEC_CORE
438 crash_wake_offline = 1;
439 #endif
440 #endif
441 }
442