1 /* 2 * common routine and memory layout for Tundra TSI108(Grendel) host bridge 3 * memory controller. 4 * 5 * Author: Jacob Pan (jacob.pan@freescale.com) 6 * Alex Bounine (alexandreb@tundra.com) 7 * 8 * Copyright 2004-2006 Freescale Semiconductor, Inc. 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License 12 * as published by the Free Software Foundation; either version 13 * 2 of the License, or (at your option) any later version. 14 */ 15 16 #ifndef __PPC_KERNEL_TSI108_H 17 #define __PPC_KERNEL_TSI108_H 18 19 #include <asm/pci-bridge.h> 20 21 /* Size of entire register space */ 22 #define TSI108_REG_SIZE (0x10000) 23 24 /* Sizes of register spaces for individual blocks */ 25 #define TSI108_HLP_SIZE 0x1000 26 #define TSI108_PCI_SIZE 0x1000 27 #define TSI108_CLK_SIZE 0x1000 28 #define TSI108_PB_SIZE 0x1000 29 #define TSI108_SD_SIZE 0x1000 30 #define TSI108_DMA_SIZE 0x1000 31 #define TSI108_ETH_SIZE 0x1000 32 #define TSI108_I2C_SIZE 0x400 33 #define TSI108_MPIC_SIZE 0x400 34 #define TSI108_UART0_SIZE 0x200 35 #define TSI108_GPIO_SIZE 0x200 36 #define TSI108_UART1_SIZE 0x200 37 38 /* Offsets within Tsi108(A) CSR space for individual blocks */ 39 #define TSI108_HLP_OFFSET 0x0000 40 #define TSI108_PCI_OFFSET 0x1000 41 #define TSI108_CLK_OFFSET 0x2000 42 #define TSI108_PB_OFFSET 0x3000 43 #define TSI108_SD_OFFSET 0x4000 44 #define TSI108_DMA_OFFSET 0x5000 45 #define TSI108_ETH_OFFSET 0x6000 46 #define TSI108_I2C_OFFSET 0x7000 47 #define TSI108_MPIC_OFFSET 0x7400 48 #define TSI108_UART0_OFFSET 0x7800 49 #define TSI108_GPIO_OFFSET 0x7A00 50 #define TSI108_UART1_OFFSET 0x7C00 51 52 /* Tsi108 registers used by common code components */ 53 #define TSI108_PCI_CSR (0x004) 54 #define TSI108_PCI_IRP_CFG_CTL (0x180) 55 #define TSI108_PCI_IRP_STAT (0x184) 56 #define TSI108_PCI_IRP_ENABLE (0x188) 57 #define TSI108_PCI_IRP_INTAD (0x18C) 58 59 #define TSI108_PCI_IRP_STAT_P_INT (0x00400000) 60 #define TSI108_PCI_IRP_ENABLE_P_INT (0x00400000) 61 62 #define TSI108_CG_PWRUP_STATUS (0x234) 63 64 #define TSI108_PB_ISR (0x00C) 65 #define TSI108_PB_ERRCS (0x404) 66 #define TSI108_PB_AERR (0x408) 67 68 #define TSI108_PB_ERRCS_ES (1 << 1) 69 #define TSI108_PB_ISR_PBS_RD_ERR (1 << 8) 70 71 #define TSI108_PCI_CFG_SIZE (0x01000000) 72 73 /* 74 * PHY Configuration Options 75 * 76 * Specify "bcm54xx" in the compatible property of your device tree phy 77 * nodes if your board uses the Broadcom PHYs 78 */ 79 #define TSI108_PHY_MV88E 0 /* Marvel 88Exxxx PHY */ 80 #define TSI108_PHY_BCM54XX 1 /* Broardcom BCM54xx PHY */ 81 82 /* Global variables */ 83 84 extern u32 tsi108_pci_cfg_base; 85 /* Exported functions */ 86 87 extern int tsi108_bridge_init(struct pci_controller *hose, uint phys_csr_base); 88 extern unsigned long tsi108_get_mem_size(void); 89 extern unsigned long tsi108_get_cpu_clk(void); 90 extern unsigned long tsi108_get_sdc_clk(void); 91 extern int tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfn, 92 int offset, int len, u32 val); 93 extern int tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, 94 int offset, int len, u32 * val); 95 extern void tsi108_clear_pci_error(u32 pci_cfg_base); 96 97 extern phys_addr_t get_csrbase(void); 98 99 typedef struct { 100 u32 regs; /* hw registers base address */ 101 u32 phyregs; /* phy registers base address */ 102 u16 phy; /* phy address */ 103 u16 irq_num; /* irq number */ 104 u8 mac_addr[6]; /* phy mac address */ 105 u16 phy_type; /* type of phy on board */ 106 } hw_info; 107 108 extern u32 get_vir_csrbase(void); 109 extern u32 tsi108_csr_vir_base; 110 111 static inline u32 tsi108_read_reg(u32 reg_offset) 112 { 113 return in_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset)); 114 } 115 116 static inline void tsi108_write_reg(u32 reg_offset, u32 val) 117 { 118 out_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset), val); 119 } 120 121 #endif /* __PPC_KERNEL_TSI108_H */ 122