xref: /openbmc/linux/arch/powerpc/include/asm/tsi108.h (revision 2874c5fd)
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3  * common routine and memory layout for Tundra TSI108(Grendel) host bridge
4  * memory controller.
5  *
6  * Author: Jacob Pan (jacob.pan@freescale.com)
7  *	   Alex Bounine (alexandreb@tundra.com)
8  *
9  * Copyright 2004-2006 Freescale Semiconductor, Inc.
10  */
11 
12 #ifndef __PPC_KERNEL_TSI108_H
13 #define __PPC_KERNEL_TSI108_H
14 
15 #include <asm/pci-bridge.h>
16 
17 /* Size of entire register space */
18 #define TSI108_REG_SIZE		(0x10000)
19 
20 /* Sizes of register spaces for individual blocks */
21 #define TSI108_HLP_SIZE		0x1000
22 #define TSI108_PCI_SIZE		0x1000
23 #define TSI108_CLK_SIZE		0x1000
24 #define TSI108_PB_SIZE		0x1000
25 #define TSI108_SD_SIZE		0x1000
26 #define TSI108_DMA_SIZE		0x1000
27 #define TSI108_ETH_SIZE		0x1000
28 #define TSI108_I2C_SIZE		0x400
29 #define TSI108_MPIC_SIZE	0x400
30 #define TSI108_UART0_SIZE	0x200
31 #define TSI108_GPIO_SIZE	0x200
32 #define TSI108_UART1_SIZE	0x200
33 
34 /* Offsets within Tsi108(A) CSR space for individual blocks */
35 #define TSI108_HLP_OFFSET	0x0000
36 #define TSI108_PCI_OFFSET	0x1000
37 #define TSI108_CLK_OFFSET	0x2000
38 #define TSI108_PB_OFFSET	0x3000
39 #define TSI108_SD_OFFSET	0x4000
40 #define TSI108_DMA_OFFSET	0x5000
41 #define TSI108_ETH_OFFSET	0x6000
42 #define TSI108_I2C_OFFSET	0x7000
43 #define TSI108_MPIC_OFFSET	0x7400
44 #define TSI108_UART0_OFFSET	0x7800
45 #define TSI108_GPIO_OFFSET	0x7A00
46 #define TSI108_UART1_OFFSET	0x7C00
47 
48 /* Tsi108 registers used by common code components */
49 #define TSI108_PCI_CSR		(0x004)
50 #define TSI108_PCI_IRP_CFG_CTL	(0x180)
51 #define TSI108_PCI_IRP_STAT	(0x184)
52 #define TSI108_PCI_IRP_ENABLE	(0x188)
53 #define TSI108_PCI_IRP_INTAD	(0x18C)
54 
55 #define TSI108_PCI_IRP_STAT_P_INT	(0x00400000)
56 #define TSI108_PCI_IRP_ENABLE_P_INT	(0x00400000)
57 
58 #define TSI108_CG_PWRUP_STATUS	(0x234)
59 
60 #define TSI108_PB_ISR		(0x00C)
61 #define TSI108_PB_ERRCS		(0x404)
62 #define TSI108_PB_AERR		(0x408)
63 
64 #define TSI108_PB_ERRCS_ES		(1 << 1)
65 #define TSI108_PB_ISR_PBS_RD_ERR	(1 << 8)
66 
67 #define TSI108_PCI_CFG_SIZE		(0x01000000)
68 
69 /*
70  * PHY Configuration Options
71  *
72  * Specify "bcm54xx" in the compatible property of your device tree phy
73  * nodes if your board uses the Broadcom PHYs
74  */
75 #define TSI108_PHY_MV88E	0	/* Marvel 88Exxxx PHY */
76 #define TSI108_PHY_BCM54XX	1	/* Broadcom BCM54xx PHY */
77 
78 /* Global variables */
79 
80 extern u32 tsi108_pci_cfg_base;
81 /* Exported functions */
82 
83 extern int tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfn,
84 				      int offset, int len, u32 val);
85 extern int tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn,
86 				     int offset, int len, u32 * val);
87 extern void tsi108_clear_pci_error(u32 pci_cfg_base);
88 
89 extern phys_addr_t get_csrbase(void);
90 
91 typedef struct {
92 	u32 regs;		/* hw registers base address */
93 	u32 phyregs;		/* phy registers base address */
94 	u16 phy;		/* phy address */
95 	u16 irq_num;		/* irq number */
96 	u8 mac_addr[6];		/* phy mac address */
97 	u16 phy_type;	/* type of phy on board */
98 } hw_info;
99 
100 extern u32 get_vir_csrbase(void);
101 extern u32 tsi108_csr_vir_base;
102 
tsi108_read_reg(u32 reg_offset)103 static inline u32 tsi108_read_reg(u32 reg_offset)
104 {
105 	return in_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset));
106 }
107 
tsi108_write_reg(u32 reg_offset,u32 val)108 static inline void tsi108_write_reg(u32 reg_offset, u32 val)
109 {
110 	out_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset), val);
111 }
112 
113 #endif				/* __PPC_KERNEL_TSI108_H */
114