1 /***********************license start***************
2 * Author: Cavium Networks
3 *
4 * Contact: support@caviumnetworks.com
5 * This file is part of the OCTEON SDK
6 *
7 * Copyright (C) 2003-2018 Cavium, Inc.
8 *
9 * This file is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License, Version 2, as
11 * published by the Free Software Foundation.
12 *
13 * This file is distributed in the hope that it will be useful, but
14 * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
15 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
16 * NONINFRINGEMENT. See the GNU General Public License for more
17 * details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this file; if not, write to the Free Software
21 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
22 * or visit http://www.gnu.org/licenses/.
23 *
24 * This file may also be available under a different license from Cavium.
25 * Contact Cavium Networks for more information
26 ***********************license end**************************************/
27
28 /*
29 * Functions for SPI initialization, configuration,
30 * and monitoring.
31 */
32 #include <asm/octeon/octeon.h>
33
34 #include <asm/octeon/cvmx-config.h>
35 #include <asm/octeon/cvmx-spi.h>
36 #include <asm/octeon/cvmx-helper.h>
37
38 #include <asm/octeon/cvmx-pip-defs.h>
39 #include <asm/octeon/cvmx-pko-defs.h>
40 #include <asm/octeon/cvmx-spxx-defs.h>
41 #include <asm/octeon/cvmx-stxx-defs.h>
42
43 /*
44 * CVMX_HELPER_SPI_TIMEOUT is used to determine how long the SPI
45 * initialization routines wait for SPI training. You can override the
46 * value using executive-config.h if necessary.
47 */
48 #ifndef CVMX_HELPER_SPI_TIMEOUT
49 #define CVMX_HELPER_SPI_TIMEOUT 10
50 #endif
51
__cvmx_helper_spi_enumerate(int interface)52 int __cvmx_helper_spi_enumerate(int interface)
53 {
54 if ((cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) &&
55 cvmx_spi4000_is_present(interface)) {
56 return 10;
57 } else {
58 return 16;
59 }
60 }
61
62 /**
63 * Probe a SPI interface and determine the number of ports
64 * connected to it. The SPI interface should still be down after
65 * this call.
66 *
67 * @interface: Interface to probe
68 *
69 * Returns Number of ports on the interface. Zero to disable.
70 */
__cvmx_helper_spi_probe(int interface)71 int __cvmx_helper_spi_probe(int interface)
72 {
73 int num_ports = 0;
74
75 if ((cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) &&
76 cvmx_spi4000_is_present(interface)) {
77 num_ports = 10;
78 } else {
79 union cvmx_pko_reg_crc_enable enable;
80 num_ports = 16;
81 /*
82 * Unlike the SPI4000, most SPI devices don't
83 * automatically put on the L2 CRC. For everything
84 * except for the SPI4000 have PKO append the L2 CRC
85 * to the packet.
86 */
87 enable.u64 = cvmx_read_csr(CVMX_PKO_REG_CRC_ENABLE);
88 enable.s.enable |= 0xffff << (interface * 16);
89 cvmx_write_csr(CVMX_PKO_REG_CRC_ENABLE, enable.u64);
90 }
91 __cvmx_helper_setup_gmx(interface, num_ports);
92 return num_ports;
93 }
94
95 /**
96 * Bringup and enable a SPI interface. After this call packet I/O
97 * should be fully functional. This is called with IPD enabled but
98 * PKO disabled.
99 *
100 * @interface: Interface to bring up
101 *
102 * Returns Zero on success, negative on failure
103 */
__cvmx_helper_spi_enable(int interface)104 int __cvmx_helper_spi_enable(int interface)
105 {
106 /*
107 * Normally the ethernet L2 CRC is checked and stripped in the
108 * GMX block. When you are using SPI, this isn' the case and
109 * IPD needs to check the L2 CRC.
110 */
111 int num_ports = cvmx_helper_ports_on_interface(interface);
112 int ipd_port;
113 for (ipd_port = interface * 16; ipd_port < interface * 16 + num_ports;
114 ipd_port++) {
115 union cvmx_pip_prt_cfgx port_config;
116 port_config.u64 = cvmx_read_csr(CVMX_PIP_PRT_CFGX(ipd_port));
117 port_config.s.crc_en = 1;
118 cvmx_write_csr(CVMX_PIP_PRT_CFGX(ipd_port), port_config.u64);
119 }
120
121 if (cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) {
122 cvmx_spi_start_interface(interface, CVMX_SPI_MODE_DUPLEX,
123 CVMX_HELPER_SPI_TIMEOUT, num_ports);
124 if (cvmx_spi4000_is_present(interface))
125 cvmx_spi4000_initialize(interface);
126 }
127 __cvmx_interrupt_spxx_int_msk_enable(interface);
128 __cvmx_interrupt_stxx_int_msk_enable(interface);
129 __cvmx_interrupt_gmxx_enable(interface);
130 return 0;
131 }
132
133 /**
134 * Return the link state of an IPD/PKO port as returned by
135 * auto negotiation. The result of this function may not match
136 * Octeon's link config if auto negotiation has changed since
137 * the last call to cvmx_helper_link_set().
138 *
139 * @ipd_port: IPD/PKO port to query
140 *
141 * Returns Link state
142 */
__cvmx_helper_spi_link_get(int ipd_port)143 union cvmx_helper_link_info __cvmx_helper_spi_link_get(int ipd_port)
144 {
145 union cvmx_helper_link_info result;
146 int interface = cvmx_helper_get_interface_num(ipd_port);
147 int index = cvmx_helper_get_interface_index_num(ipd_port);
148 result.u64 = 0;
149
150 if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_SIM) {
151 /* The simulator gives you a simulated full duplex link */
152 result.s.link_up = 1;
153 result.s.full_duplex = 1;
154 result.s.speed = 10000;
155 } else if (cvmx_spi4000_is_present(interface)) {
156 union cvmx_gmxx_rxx_rx_inbnd inband =
157 cvmx_spi4000_check_speed(interface, index);
158 result.s.link_up = inband.s.status;
159 result.s.full_duplex = inband.s.duplex;
160 switch (inband.s.speed) {
161 case 0: /* 10 Mbps */
162 result.s.speed = 10;
163 break;
164 case 1: /* 100 Mbps */
165 result.s.speed = 100;
166 break;
167 case 2: /* 1 Gbps */
168 result.s.speed = 1000;
169 break;
170 case 3: /* Illegal */
171 result.s.speed = 0;
172 result.s.link_up = 0;
173 break;
174 }
175 } else {
176 /* For generic SPI we can't determine the link, just return some
177 sane results */
178 result.s.link_up = 1;
179 result.s.full_duplex = 1;
180 result.s.speed = 10000;
181 }
182 return result;
183 }
184
185 /**
186 * Configure an IPD/PKO port for the specified link state. This
187 * function does not influence auto negotiation at the PHY level.
188 * The passed link state must always match the link state returned
189 * by cvmx_helper_link_get().
190 *
191 * @ipd_port: IPD/PKO port to configure
192 * @link_info: The new link state
193 *
194 * Returns Zero on success, negative on failure
195 */
__cvmx_helper_spi_link_set(int ipd_port,union cvmx_helper_link_info link_info)196 int __cvmx_helper_spi_link_set(int ipd_port, union cvmx_helper_link_info link_info)
197 {
198 /* Nothing to do. If we have a SPI4000 then the setup was already performed
199 by cvmx_spi4000_check_speed(). If not then there isn't any link
200 info */
201 return 0;
202 }
203