1 // SPDX-License-Identifier: GPL-2.0 2 /***************************************************************************/ 3 4 /* 5 * 525x.c -- platform support for ColdFire 525x based boards 6 * 7 * Copyright (C) 2012, Steven King <sfking@fdwdc.com> 8 */ 9 10 /***************************************************************************/ 11 12 #include <linux/clkdev.h> 13 #include <linux/kernel.h> 14 #include <linux/param.h> 15 #include <linux/init.h> 16 #include <linux/io.h> 17 #include <linux/platform_device.h> 18 #include <asm/machdep.h> 19 #include <asm/coldfire.h> 20 #include <asm/mcfsim.h> 21 #include <asm/mcfclk.h> 22 23 /***************************************************************************/ 24 25 DEFINE_CLK(pll, "pll.0", MCF_CLK); 26 DEFINE_CLK(sys, "sys.0", MCF_BUSCLK); 27 28 static struct clk_lookup m525x_clk_lookup[] = { 29 CLKDEV_INIT(NULL, "pll.0", &clk_pll), 30 CLKDEV_INIT(NULL, "sys.0", &clk_sys), 31 CLKDEV_INIT("mcftmr.0", NULL, &clk_sys), 32 CLKDEV_INIT("mcftmr.1", NULL, &clk_sys), 33 CLKDEV_INIT("mcfuart.0", NULL, &clk_sys), 34 CLKDEV_INIT("mcfuart.1", NULL, &clk_sys), 35 CLKDEV_INIT("mcfqspi.0", NULL, &clk_sys), 36 CLKDEV_INIT("imx1-i2c.0", NULL, &clk_sys), 37 CLKDEV_INIT("imx1-i2c.1", NULL, &clk_sys), 38 }; 39 40 /***************************************************************************/ 41 42 static void __init m525x_qspi_init(void) 43 { 44 #if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) 45 /* set the GPIO function for the qspi cs gpios */ 46 /* FIXME: replace with pinmux/pinctl support */ 47 u32 f = readl(MCFSIM2_GPIOFUNC); 48 f |= (1 << MCFQSPI_CS2) | (1 << MCFQSPI_CS1) | (1 << MCFQSPI_CS0); 49 writel(f, MCFSIM2_GPIOFUNC); 50 51 /* QSPI irq setup */ 52 writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI0, 53 MCFSIM_QSPIICR); 54 mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI); 55 #endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */ 56 } 57 58 static void __init m525x_i2c_init(void) 59 { 60 #if IS_ENABLED(CONFIG_I2C_IMX) 61 u32 r; 62 63 /* first I2C controller uses regular irq setup */ 64 writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0, 65 MCFSIM_I2CICR); 66 mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C); 67 68 /* second I2C controller is completely different */ 69 r = readl(MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1)); 70 r &= ~MCFINTC2_INTPRI_BITS(0xf, MCF_IRQ_I2C1); 71 r |= MCFINTC2_INTPRI_BITS(0x5, MCF_IRQ_I2C1); 72 writel(r, MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1)); 73 #endif /* IS_ENABLED(CONFIG_I2C_IMX) */ 74 } 75 76 /***************************************************************************/ 77 78 void __init config_BSP(char *commandp, int size) 79 { 80 mach_sched_init = hw_timer_init; 81 82 m525x_qspi_init(); 83 m525x_i2c_init(); 84 85 clkdev_add_table(m525x_clk_lookup, ARRAY_SIZE(m525x_clk_lookup)); 86 } 87 88 /***************************************************************************/ 89