1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * dts file for Xilinx ZynqMP ZCU106
4 *
5 * (C) Copyright 2016 - 2022, Xilinx, Inc.
6 * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
7 *
8 * Michal Simek <michal.simek@amd.com>
9 */
10
11/dts-v1/;
12
13#include "zynqmp.dtsi"
14#include "zynqmp-clk-ccf.dtsi"
15#include <dt-bindings/input/input.h>
16#include <dt-bindings/gpio/gpio.h>
17#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
18#include <dt-bindings/phy/phy.h>
19
20/ {
21	model = "ZynqMP ZCU106 RevA";
22	compatible = "xlnx,zynqmp-zcu106-revA", "xlnx,zynqmp-zcu106", "xlnx,zynqmp";
23
24	aliases {
25		ethernet0 = &gem3;
26		i2c0 = &i2c0;
27		i2c1 = &i2c1;
28		mmc0 = &sdhci1;
29		nvmem0 = &eeprom;
30		rtc0 = &rtc;
31		serial0 = &uart0;
32		serial1 = &uart1;
33		serial2 = &dcc;
34		spi0 = &qspi;
35		usb0 = &usb0;
36	};
37
38	chosen {
39		bootargs = "earlycon";
40		stdout-path = "serial0:115200n8";
41	};
42
43	memory@0 {
44		device_type = "memory";
45		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
46	};
47
48	gpio-keys {
49		compatible = "gpio-keys";
50		autorepeat;
51		switch-19 {
52			label = "sw19";
53			gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
54			linux,code = <KEY_DOWN>;
55			wakeup-source;
56			autorepeat;
57		};
58	};
59
60	leds {
61		compatible = "gpio-leds";
62		heartbeat-led {
63			label = "heartbeat";
64			gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
65			linux,default-trigger = "heartbeat";
66		};
67	};
68
69	ina226-u76 {
70		compatible = "iio-hwmon";
71		io-channels = <&u76 0>, <&u76 1>, <&u76 2>, <&u76 3>;
72	};
73	ina226-u77 {
74		compatible = "iio-hwmon";
75		io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>;
76	};
77	ina226-u78 {
78		compatible = "iio-hwmon";
79		io-channels = <&u78 0>, <&u78 1>, <&u78 2>, <&u78 3>;
80	};
81	ina226-u87 {
82		compatible = "iio-hwmon";
83		io-channels = <&u87 0>, <&u87 1>, <&u87 2>, <&u87 3>;
84	};
85	ina226-u85 {
86		compatible = "iio-hwmon";
87		io-channels = <&u85 0>, <&u85 1>, <&u85 2>, <&u85 3>;
88	};
89	ina226-u86 {
90		compatible = "iio-hwmon";
91		io-channels = <&u86 0>, <&u86 1>, <&u86 2>, <&u86 3>;
92	};
93	ina226-u93 {
94		compatible = "iio-hwmon";
95		io-channels = <&u93 0>, <&u93 1>, <&u93 2>, <&u93 3>;
96	};
97	ina226-u88 {
98		compatible = "iio-hwmon";
99		io-channels = <&u88 0>, <&u88 1>, <&u88 2>, <&u88 3>;
100	};
101	ina226-u15 {
102		compatible = "iio-hwmon";
103		io-channels = <&u15 0>, <&u15 1>, <&u15 2>, <&u15 3>;
104	};
105	ina226-u92 {
106		compatible = "iio-hwmon";
107		io-channels = <&u92 0>, <&u92 1>, <&u92 2>, <&u92 3>;
108	};
109	ina226-u79 {
110		compatible = "iio-hwmon";
111		io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
112	};
113	ina226-u81 {
114		compatible = "iio-hwmon";
115		io-channels = <&u81 0>, <&u81 1>, <&u81 2>, <&u81 3>;
116	};
117	ina226-u80 {
118		compatible = "iio-hwmon";
119		io-channels = <&u80 0>, <&u80 1>, <&u80 2>, <&u80 3>;
120	};
121	ina226-u84 {
122		compatible = "iio-hwmon";
123		io-channels = <&u84 0>, <&u84 1>, <&u84 2>, <&u84 3>;
124	};
125	ina226-u16 {
126		compatible = "iio-hwmon";
127		io-channels = <&u16 0>, <&u16 1>, <&u16 2>, <&u16 3>;
128	};
129	ina226-u65 {
130		compatible = "iio-hwmon";
131		io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
132	};
133	ina226-u74 {
134		compatible = "iio-hwmon";
135		io-channels = <&u74 0>, <&u74 1>, <&u74 2>, <&u74 3>;
136	};
137	ina226-u75 {
138		compatible = "iio-hwmon";
139		io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>;
140	};
141
142	/* 48MHz reference crystal */
143	ref48: ref48M {
144		compatible = "fixed-clock";
145		#clock-cells = <0>;
146		clock-frequency = <48000000>;
147	};
148
149	refhdmi: refhdmi {
150		compatible = "fixed-clock";
151		#clock-cells = <0>;
152		clock-frequency = <114285000>;
153	};
154
155	dpcon {
156		compatible = "dp-connector";
157		label = "P11";
158		type = "full-size";
159
160		port {
161			dpcon_in: endpoint {
162				remote-endpoint = <&dpsub_dp_out>;
163			};
164		};
165	};
166};
167
168&can1 {
169	status = "okay";
170	pinctrl-names = "default";
171	pinctrl-0 = <&pinctrl_can1_default>;
172};
173
174&dcc {
175	status = "okay";
176};
177
178&fpd_dma_chan1 {
179	status = "okay";
180};
181
182&fpd_dma_chan2 {
183	status = "okay";
184};
185
186&fpd_dma_chan3 {
187	status = "okay";
188};
189
190&fpd_dma_chan4 {
191	status = "okay";
192};
193
194&fpd_dma_chan5 {
195	status = "okay";
196};
197
198&fpd_dma_chan6 {
199	status = "okay";
200};
201
202&fpd_dma_chan7 {
203	status = "okay";
204};
205
206&fpd_dma_chan8 {
207	status = "okay";
208};
209
210&gem3 {
211	status = "okay";
212	phy-handle = <&phy0>;
213	phy-mode = "rgmii-id";
214	pinctrl-names = "default";
215	pinctrl-0 = <&pinctrl_gem3_default>;
216	mdio: mdio {
217		#address-cells = <1>;
218		#size-cells = <0>;
219		phy0: ethernet-phy@c {
220			#phy-cells = <1>;
221			reg = <0xc>;
222			compatible = "ethernet-phy-id2000.a231";
223			ti,rx-internal-delay = <0x8>;
224			ti,tx-internal-delay = <0xa>;
225			ti,fifo-depth = <0x1>;
226			ti,dp83867-rxctrl-strap-quirk;
227			reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>;
228		};
229	};
230};
231
232&gpio {
233	status = "okay";
234	pinctrl-names = "default";
235	pinctrl-0 = <&pinctrl_gpio_default>;
236};
237
238&gpu {
239	status = "okay";
240};
241
242&i2c0 {
243	status = "okay";
244	clock-frequency = <400000>;
245	pinctrl-names = "default", "gpio";
246	pinctrl-0 = <&pinctrl_i2c0_default>;
247	pinctrl-1 = <&pinctrl_i2c0_gpio>;
248	scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
249	sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
250
251	tca6416_u97: gpio@20 {
252		compatible = "ti,tca6416";
253		reg = <0x20>;
254		gpio-controller; /* interrupt not connected */
255		#gpio-cells = <2>;
256		/*
257		 * IRQ not connected
258		 * Lines:
259		 * 0 - SFP_SI5328_INT_ALM
260		 * 1 - HDMI_SI5328_INT_ALM
261		 * 5 - IIC_MUX_RESET_B
262		 * 6 - GEM3_EXP_RESET_B
263		 * 10 - FMC_HPC0_PRSNT_M2C_B
264		 * 11 - FMC_HPC1_PRSNT_M2C_B
265		 * 2-4, 7, 12-17 - not connected
266		 */
267	};
268
269	tca6416_u61: gpio@21 {
270		compatible = "ti,tca6416";
271		reg = <0x21>;
272		gpio-controller;
273		#gpio-cells = <2>;
274		/*
275		 * IRQ not connected
276		 * Lines:
277		 * 0 - VCCPSPLL_EN
278		 * 1 - MGTRAVCC_EN
279		 * 2 - MGTRAVTT_EN
280		 * 3 - VCCPSDDRPLL_EN
281		 * 4 - MIO26_PMU_INPUT_LS
282		 * 5 - PL_PMBUS_ALERT
283		 * 6 - PS_PMBUS_ALERT
284		 * 7 - MAXIM_PMBUS_ALERT
285		 * 10 - PL_DDR4_VTERM_EN
286		 * 11 - PL_DDR4_VPP_2V5_EN
287		 * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON
288		 * 13 - PS_DIMM_SUSPEND_EN
289		 * 14 - PS_DDR4_VTERM_EN
290		 * 15 - PS_DDR4_VPP_2V5_EN
291		 * 16 - 17 - not connected
292		 */
293	};
294
295	i2c-mux@75 { /* u60 */
296		compatible = "nxp,pca9544";
297		#address-cells = <1>;
298		#size-cells = <0>;
299		reg = <0x75>;
300		i2c@0 {
301			#address-cells = <1>;
302			#size-cells = <0>;
303			reg = <0>;
304			/* PS_PMBUS */
305			u76: ina226@40 { /* u76 */
306				compatible = "ti,ina226";
307				#io-channel-cells = <1>;
308				label = "ina226-u76";
309				reg = <0x40>;
310				shunt-resistor = <5000>;
311			};
312			u77: ina226@41 { /* u77 */
313				compatible = "ti,ina226";
314				#io-channel-cells = <1>;
315				label = "ina226-u77";
316				reg = <0x41>;
317				shunt-resistor = <5000>;
318			};
319			u78: ina226@42 { /* u78 */
320				compatible = "ti,ina226";
321				#io-channel-cells = <1>;
322				label = "ina226-u78";
323				reg = <0x42>;
324				shunt-resistor = <5000>;
325			};
326			u87: ina226@43 { /* u87 */
327				compatible = "ti,ina226";
328				#io-channel-cells = <1>;
329				label = "ina226-u87";
330				reg = <0x43>;
331				shunt-resistor = <5000>;
332			};
333			u85: ina226@44 { /* u85 */
334				compatible = "ti,ina226";
335				#io-channel-cells = <1>;
336				label = "ina226-u85";
337				reg = <0x44>;
338				shunt-resistor = <5000>;
339			};
340			u86: ina226@45 { /* u86 */
341				compatible = "ti,ina226";
342				#io-channel-cells = <1>;
343				label = "ina226-u86";
344				reg = <0x45>;
345				shunt-resistor = <5000>;
346			};
347			u93: ina226@46 { /* u93 */
348				compatible = "ti,ina226";
349				#io-channel-cells = <1>;
350				label = "ina226-u93";
351				reg = <0x46>;
352				shunt-resistor = <5000>;
353			};
354			u88: ina226@47 { /* u88 */
355				compatible = "ti,ina226";
356				#io-channel-cells = <1>;
357				label = "ina226-u88";
358				reg = <0x47>;
359				shunt-resistor = <5000>;
360			};
361			u15: ina226@4a { /* u15 */
362				compatible = "ti,ina226";
363				#io-channel-cells = <1>;
364				label = "ina226-u15";
365				reg = <0x4a>;
366				shunt-resistor = <5000>;
367			};
368			u92: ina226@4b { /* u92 */
369				compatible = "ti,ina226";
370				#io-channel-cells = <1>;
371				label = "ina226-u92";
372				reg = <0x4b>;
373				shunt-resistor = <5000>;
374			};
375		};
376		i2c@1 {
377			#address-cells = <1>;
378			#size-cells = <0>;
379			reg = <1>;
380			/* PL_PMBUS */
381			u79: ina226@40 { /* u79 */
382				compatible = "ti,ina226";
383				#io-channel-cells = <1>;
384				label = "ina226-u79";
385				reg = <0x40>;
386				shunt-resistor = <2000>;
387			};
388			u81: ina226@41 { /* u81 */
389				compatible = "ti,ina226";
390				#io-channel-cells = <1>;
391				label = "ina226-u81";
392				reg = <0x41>;
393				shunt-resistor = <5000>;
394			};
395			u80: ina226@42 { /* u80 */
396				compatible = "ti,ina226";
397				#io-channel-cells = <1>;
398				label = "ina226-u80";
399				reg = <0x42>;
400				shunt-resistor = <5000>;
401			};
402			u84: ina226@43 { /* u84 */
403				compatible = "ti,ina226";
404				#io-channel-cells = <1>;
405				label = "ina226-u84";
406				reg = <0x43>;
407				shunt-resistor = <5000>;
408			};
409			u16: ina226@44 { /* u16 */
410				compatible = "ti,ina226";
411				#io-channel-cells = <1>;
412				label = "ina226-u16";
413				reg = <0x44>;
414				shunt-resistor = <5000>;
415			};
416			u65: ina226@45 { /* u65 */
417				compatible = "ti,ina226";
418				#io-channel-cells = <1>;
419				label = "ina226-u65";
420				reg = <0x45>;
421				shunt-resistor = <5000>;
422			};
423			u74: ina226@46 { /* u74 */
424				compatible = "ti,ina226";
425				#io-channel-cells = <1>;
426				label = "ina226-u74";
427				reg = <0x46>;
428				shunt-resistor = <5000>;
429			};
430			u75: ina226@47 { /* u75 */
431				compatible = "ti,ina226";
432				#io-channel-cells = <1>;
433				label = "ina226-u75";
434				reg = <0x47>;
435				shunt-resistor = <5000>;
436			};
437		};
438		i2c@2 {
439			#address-cells = <1>;
440			#size-cells = <0>;
441			reg = <2>;
442			/* MAXIM_PMBUS - 00 */
443			max15301@a { /* u46 */
444				compatible = "maxim,max15301";
445				reg = <0xa>;
446			};
447			max15303@b { /* u4 */
448				compatible = "maxim,max15303";
449				reg = <0xb>;
450			};
451			max15303@10 { /* u13 */
452				compatible = "maxim,max15303";
453				reg = <0x10>;
454			};
455			max15301@13 { /* u47 */
456				compatible = "maxim,max15301";
457				reg = <0x13>;
458			};
459			max15303@14 { /* u7 */
460				compatible = "maxim,max15303";
461				reg = <0x14>;
462			};
463			max15303@15 { /* u6 */
464				compatible = "maxim,max15303";
465				reg = <0x15>;
466			};
467			max15303@16 { /* u10 */
468				compatible = "maxim,max15303";
469				reg = <0x16>;
470			};
471			max15303@17 { /* u9 */
472				compatible = "maxim,max15303";
473				reg = <0x17>;
474			};
475			max15301@18 { /* u63 */
476				compatible = "maxim,max15301";
477				reg = <0x18>;
478			};
479			max15303@1a { /* u49 */
480				compatible = "maxim,max15303";
481				reg = <0x1a>;
482			};
483			max15303@1b { /* u8 */
484				compatible = "maxim,max15303";
485				reg = <0x1b>;
486			};
487			max15303@1d { /* u18 */
488				compatible = "maxim,max15303";
489				reg = <0x1d>;
490			};
491
492			max20751@72 { /* u95 */
493				compatible = "maxim,max20751";
494				reg = <0x72>;
495			};
496			max20751@73 { /* u96 */
497				compatible = "maxim,max20751";
498				reg = <0x73>;
499			};
500		};
501		/* Bus 3 is not connected */
502	};
503};
504
505&i2c1 {
506	status = "okay";
507	clock-frequency = <400000>;
508	pinctrl-names = "default", "gpio";
509	pinctrl-0 = <&pinctrl_i2c1_default>;
510	pinctrl-1 = <&pinctrl_i2c1_gpio>;
511	scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
512	sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
513
514	/* PL i2c via PCA9306 - u45 */
515	i2c-mux@74 { /* u34 */
516		compatible = "nxp,pca9548";
517		#address-cells = <1>;
518		#size-cells = <0>;
519		reg = <0x74>;
520		i2c@0 {
521			#address-cells = <1>;
522			#size-cells = <0>;
523			reg = <0>;
524			/*
525			 * IIC_EEPROM 1kB memory which uses 256B blocks
526			 * where every block has different address.
527			 *    0 - 256B address 0x54
528			 * 256B - 512B address 0x55
529			 * 512B - 768B address 0x56
530			 * 768B - 1024B address 0x57
531			 */
532			eeprom: eeprom@54 { /* u23 */
533				compatible = "atmel,24c08";
534				reg = <0x54>;
535			};
536		};
537		i2c@1 {
538			#address-cells = <1>;
539			#size-cells = <0>;
540			reg = <1>;
541			si5341: clock-generator@36 { /* SI5341 - u69 */
542				compatible = "silabs,si5341";
543				reg = <0x36>;
544				#clock-cells = <2>;
545				#address-cells = <1>;
546				#size-cells = <0>;
547				clocks = <&ref48>;
548				clock-names = "xtal";
549				clock-output-names = "si5341";
550
551				si5341_0: out@0 {
552					/* refclk0 for PS-GT, used for DP */
553					reg = <0>;
554					always-on;
555				};
556				si5341_2: out@2 {
557					/* refclk2 for PS-GT, used for USB3 */
558					reg = <2>;
559					always-on;
560				};
561				si5341_3: out@3 {
562					/* refclk3 for PS-GT, used for SATA */
563					reg = <3>;
564					always-on;
565				};
566				si5341_6: out@6 {
567					/* refclk6 PL CLK125 */
568					reg = <6>;
569					always-on;
570				};
571				si5341_7: out@7 {
572					/* refclk7 PL CLK74 */
573					reg = <7>;
574					always-on;
575				};
576				si5341_9: out@9 {
577					/* refclk9 used for PS_REF_CLK 33.3 MHz */
578					reg = <9>;
579					always-on;
580				};
581			};
582
583		};
584		i2c@2 {
585			#address-cells = <1>;
586			#size-cells = <0>;
587			reg = <2>;
588			si570_1: clock-generator@5d { /* USER SI570 - u42 */
589				#clock-cells = <0>;
590				compatible = "silabs,si570";
591				reg = <0x5d>;
592				temperature-stability = <50>;
593				factory-fout = <300000000>;
594				clock-frequency = <300000000>;
595				clock-output-names = "si570_user";
596			};
597		};
598		i2c@3 {
599			#address-cells = <1>;
600			#size-cells = <0>;
601			reg = <3>;
602			si570_2: clock-generator@5d { /* USER MGT SI570 - u56 */
603				#clock-cells = <0>;
604				compatible = "silabs,si570";
605				reg = <0x5d>;
606				temperature-stability = <50>; /* copy from zc702 */
607				factory-fout = <156250000>;
608				clock-frequency = <148500000>;
609				clock-output-names = "si570_mgt";
610			};
611		};
612		i2c@4 {
613			#address-cells = <1>;
614			#size-cells = <0>;
615			reg = <4>;
616			/* SI5328 - u20 */
617		};
618		i2c@5 {
619			#address-cells = <1>;
620			#size-cells = <0>;
621			reg = <5>; /* FAN controller */
622			temp@4c {/* lm96163 - u128 */
623				compatible = "national,lm96163";
624				reg = <0x4c>;
625			};
626		};
627		/* 6 - 7 unconnected */
628	};
629
630	i2c-mux@75 {
631		compatible = "nxp,pca9548"; /* u135 */
632		#address-cells = <1>;
633		#size-cells = <0>;
634		reg = <0x75>;
635
636		i2c@0 {
637			#address-cells = <1>;
638			#size-cells = <0>;
639			reg = <0>;
640			/* HPC0_IIC */
641		};
642		i2c@1 {
643			#address-cells = <1>;
644			#size-cells = <0>;
645			reg = <1>;
646			/* HPC1_IIC */
647		};
648		i2c@2 {
649			#address-cells = <1>;
650			#size-cells = <0>;
651			reg = <2>;
652			/* SYSMON */
653		};
654		i2c@3 {
655			#address-cells = <1>;
656			#size-cells = <0>;
657			reg = <3>;
658			/* DDR4 SODIMM */
659		};
660		i2c@4 {
661			#address-cells = <1>;
662			#size-cells = <0>;
663			reg = <4>;
664			/* SEP 3 */
665		};
666		i2c@5 {
667			#address-cells = <1>;
668			#size-cells = <0>;
669			reg = <5>;
670			/* SEP 2 */
671		};
672		i2c@6 {
673			#address-cells = <1>;
674			#size-cells = <0>;
675			reg = <6>;
676			/* SEP 1 */
677		};
678		i2c@7 {
679			#address-cells = <1>;
680			#size-cells = <0>;
681			reg = <7>;
682			/* SEP 0 */
683		};
684	};
685};
686
687&pinctrl0 {
688	status = "okay";
689	pinctrl_i2c0_default: i2c0-default {
690		mux {
691			groups = "i2c0_3_grp";
692			function = "i2c0";
693		};
694
695		conf {
696			groups = "i2c0_3_grp";
697			bias-pull-up;
698			slew-rate = <SLEW_RATE_SLOW>;
699			power-source = <IO_STANDARD_LVCMOS18>;
700		};
701	};
702
703	pinctrl_i2c0_gpio: i2c0-gpio {
704		mux {
705			groups = "gpio0_14_grp", "gpio0_15_grp";
706			function = "gpio0";
707		};
708
709		conf {
710			groups = "gpio0_14_grp", "gpio0_15_grp";
711			slew-rate = <SLEW_RATE_SLOW>;
712			power-source = <IO_STANDARD_LVCMOS18>;
713		};
714	};
715
716	pinctrl_i2c1_default: i2c1-default {
717		mux {
718			groups = "i2c1_4_grp";
719			function = "i2c1";
720		};
721
722		conf {
723			groups = "i2c1_4_grp";
724			bias-pull-up;
725			slew-rate = <SLEW_RATE_SLOW>;
726			power-source = <IO_STANDARD_LVCMOS18>;
727		};
728	};
729
730	pinctrl_i2c1_gpio: i2c1-gpio {
731		mux {
732			groups = "gpio0_16_grp", "gpio0_17_grp";
733			function = "gpio0";
734		};
735
736		conf {
737			groups = "gpio0_16_grp", "gpio0_17_grp";
738			slew-rate = <SLEW_RATE_SLOW>;
739			power-source = <IO_STANDARD_LVCMOS18>;
740		};
741	};
742
743	pinctrl_uart0_default: uart0-default {
744		mux {
745			groups = "uart0_4_grp";
746			function = "uart0";
747		};
748
749		conf {
750			groups = "uart0_4_grp";
751			slew-rate = <SLEW_RATE_SLOW>;
752			power-source = <IO_STANDARD_LVCMOS18>;
753		};
754
755		conf-rx {
756			pins = "MIO18";
757			bias-high-impedance;
758		};
759
760		conf-tx {
761			pins = "MIO19";
762			bias-disable;
763		};
764	};
765
766	pinctrl_uart1_default: uart1-default {
767		mux {
768			groups = "uart1_5_grp";
769			function = "uart1";
770		};
771
772		conf {
773			groups = "uart1_5_grp";
774			slew-rate = <SLEW_RATE_SLOW>;
775			power-source = <IO_STANDARD_LVCMOS18>;
776		};
777
778		conf-rx {
779			pins = "MIO21";
780			bias-high-impedance;
781		};
782
783		conf-tx {
784			pins = "MIO20";
785			bias-disable;
786		};
787	};
788
789	pinctrl_usb0_default: usb0-default {
790		mux {
791			groups = "usb0_0_grp";
792			function = "usb0";
793		};
794
795		conf {
796			groups = "usb0_0_grp";
797			power-source = <IO_STANDARD_LVCMOS18>;
798		};
799
800		conf-rx {
801			pins = "MIO52", "MIO53", "MIO55";
802			bias-high-impedance;
803			drive-strength = <12>;
804			slew-rate = <SLEW_RATE_FAST>;
805		};
806
807		conf-tx {
808			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
809			       "MIO60", "MIO61", "MIO62", "MIO63";
810			bias-disable;
811			drive-strength = <4>;
812			slew-rate = <SLEW_RATE_SLOW>;
813		};
814	};
815
816	pinctrl_gem3_default: gem3-default {
817		mux {
818			function = "ethernet3";
819			groups = "ethernet3_0_grp";
820		};
821
822		conf {
823			groups = "ethernet3_0_grp";
824			slew-rate = <SLEW_RATE_SLOW>;
825			power-source = <IO_STANDARD_LVCMOS18>;
826		};
827
828		conf-rx {
829			pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74",
830									"MIO75";
831			bias-high-impedance;
832			low-power-disable;
833		};
834
835		conf-tx {
836			pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68",
837									"MIO69";
838			bias-disable;
839			low-power-enable;
840		};
841
842		mux-mdio {
843			function = "mdio3";
844			groups = "mdio3_0_grp";
845		};
846
847		conf-mdio {
848			groups = "mdio3_0_grp";
849			slew-rate = <SLEW_RATE_SLOW>;
850			power-source = <IO_STANDARD_LVCMOS18>;
851			bias-disable;
852		};
853	};
854
855	pinctrl_can1_default: can1-default {
856		mux {
857			function = "can1";
858			groups = "can1_6_grp";
859		};
860
861		conf {
862			groups = "can1_6_grp";
863			slew-rate = <SLEW_RATE_SLOW>;
864			power-source = <IO_STANDARD_LVCMOS18>;
865		};
866
867		conf-rx {
868			pins = "MIO25";
869			bias-high-impedance;
870		};
871
872		conf-tx {
873			pins = "MIO24";
874			bias-disable;
875		};
876	};
877
878	pinctrl_sdhci1_default: sdhci1-default {
879		mux {
880			groups = "sdio1_0_grp";
881			function = "sdio1";
882		};
883
884		conf {
885			groups = "sdio1_0_grp";
886			slew-rate = <SLEW_RATE_SLOW>;
887			power-source = <IO_STANDARD_LVCMOS18>;
888			bias-disable;
889		};
890
891		mux-cd {
892			groups = "sdio1_cd_0_grp";
893			function = "sdio1_cd";
894		};
895
896		conf-cd {
897			groups = "sdio1_cd_0_grp";
898			bias-high-impedance;
899			bias-pull-up;
900			slew-rate = <SLEW_RATE_SLOW>;
901			power-source = <IO_STANDARD_LVCMOS18>;
902		};
903
904		mux-wp {
905			groups = "sdio1_wp_0_grp";
906			function = "sdio1_wp";
907		};
908
909		conf-wp {
910			groups = "sdio1_wp_0_grp";
911			bias-high-impedance;
912			bias-pull-up;
913			slew-rate = <SLEW_RATE_SLOW>;
914			power-source = <IO_STANDARD_LVCMOS18>;
915		};
916	};
917
918	pinctrl_gpio_default: gpio-default {
919		mux {
920			function = "gpio0";
921			groups = "gpio0_22_grp", "gpio0_23_grp";
922		};
923
924		conf {
925			groups = "gpio0_22_grp", "gpio0_23_grp";
926			slew-rate = <SLEW_RATE_SLOW>;
927			power-source = <IO_STANDARD_LVCMOS18>;
928		};
929
930		mux-msp {
931			function = "gpio0";
932			groups = "gpio0_13_grp", "gpio0_38_grp";
933		};
934
935		conf-msp {
936			groups = "gpio0_13_grp", "gpio0_38_grp";
937			slew-rate = <SLEW_RATE_SLOW>;
938			power-source = <IO_STANDARD_LVCMOS18>;
939		};
940
941		conf-pull-up {
942			pins = "MIO22";
943			bias-pull-up;
944		};
945
946		conf-pull-none {
947			pins = "MIO13", "MIO23", "MIO38";
948			bias-disable;
949		};
950	};
951};
952
953&psgtr {
954	status = "okay";
955	/* nc, sata, usb3, dp */
956	clocks = <&si5341 0 3>, <&si5341 0 2>, <&si5341 0 0>;
957	clock-names = "ref1", "ref2", "ref3";
958};
959
960&qspi {
961	status = "okay";
962	flash@0 {
963		compatible = "m25p80", "jedec,spi-nor"; /* 16MB + 16MB */
964		#address-cells = <1>;
965		#size-cells = <1>;
966		reg = <0x0>;
967		spi-tx-bus-width = <4>;
968		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
969		spi-max-frequency = <108000000>; /* Based on DC1 spec */
970	};
971};
972
973&rtc {
974	status = "okay";
975};
976
977&sata {
978	status = "okay";
979	/* SATA OOB timing settings */
980	ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
981	ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
982	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
983	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
984	ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
985	ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
986	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
987	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
988	phy-names = "sata-phy";
989	phys = <&psgtr 3 PHY_TYPE_SATA 1 1>;
990};
991
992/* SD1 with level shifter */
993&sdhci1 {
994	status = "okay";
995	/*
996	 * This property should be removed for supporting UHS mode
997	 */
998	no-1-8-v;
999	pinctrl-names = "default";
1000	pinctrl-0 = <&pinctrl_sdhci1_default>;
1001	xlnx,mio-bank = <1>;
1002};
1003
1004&uart0 {
1005	status = "okay";
1006	pinctrl-names = "default";
1007	pinctrl-0 = <&pinctrl_uart0_default>;
1008};
1009
1010&uart1 {
1011	status = "okay";
1012	pinctrl-names = "default";
1013	pinctrl-0 = <&pinctrl_uart1_default>;
1014};
1015
1016/* ULPI SMSC USB3320 */
1017&usb0 {
1018	status = "okay";
1019	pinctrl-names = "default";
1020	pinctrl-0 = <&pinctrl_usb0_default>;
1021	phy-names = "usb3-phy";
1022	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
1023};
1024
1025&dwc3_0 {
1026	status = "okay";
1027	dr_mode = "host";
1028	snps,usb3_lpm_capable;
1029	maximum-speed = "super-speed";
1030};
1031
1032&watchdog0 {
1033	status = "okay";
1034};
1035
1036&zynqmp_dpdma {
1037	status = "okay";
1038};
1039
1040&zynqmp_dpsub {
1041	status = "okay";
1042	phy-names = "dp-phy0", "dp-phy1";
1043	phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
1044	       <&psgtr 0 PHY_TYPE_DP 1 3>;
1045
1046	ports {
1047		port@5 {
1048			dpsub_dp_out: endpoint {
1049				remote-endpoint = <&dpcon_in>;
1050			};
1051		};
1052	};
1053};
1054