1// SPDX-License-Identifier: GPL-2.0+ 2/* 3 * dts file for Xilinx ZynqMP ZCU102 RevA 4 * 5 * (C) Copyright 2015 - 2019, Xilinx, Inc. 6 * 7 * Michal Simek <michal.simek@xilinx.com> 8 */ 9 10/dts-v1/; 11 12#include "zynqmp.dtsi" 13#include "zynqmp-clk-ccf.dtsi" 14#include <dt-bindings/input/input.h> 15#include <dt-bindings/gpio/gpio.h> 16 17/ { 18 model = "ZynqMP ZCU102 RevA"; 19 compatible = "xlnx,zynqmp-zcu102-revA", "xlnx,zynqmp-zcu102", "xlnx,zynqmp"; 20 21 aliases { 22 ethernet0 = &gem3; 23 i2c0 = &i2c0; 24 i2c1 = &i2c1; 25 mmc0 = &sdhci1; 26 rtc0 = &rtc; 27 serial0 = &uart0; 28 serial1 = &uart1; 29 serial2 = &dcc; 30 }; 31 32 chosen { 33 bootargs = "earlycon"; 34 stdout-path = "serial0:115200n8"; 35 }; 36 37 memory@0 { 38 device_type = "memory"; 39 reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; 40 }; 41 42 gpio-keys { 43 compatible = "gpio-keys"; 44 autorepeat; 45 sw19 { 46 label = "sw19"; 47 gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; 48 linux,code = <KEY_DOWN>; 49 wakeup-source; 50 autorepeat; 51 }; 52 }; 53 54 leds { 55 compatible = "gpio-leds"; 56 heartbeat-led { 57 label = "heartbeat"; 58 gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; 59 linux,default-trigger = "heartbeat"; 60 }; 61 }; 62 63 ina226-u76 { 64 compatible = "iio-hwmon"; 65 io-channels = <&u76 0>, <&u76 1>, <&u76 2>, <&u76 3>; 66 }; 67 ina226-u77 { 68 compatible = "iio-hwmon"; 69 io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>; 70 }; 71 ina226-u78 { 72 compatible = "iio-hwmon"; 73 io-channels = <&u78 0>, <&u78 1>, <&u78 2>, <&u78 3>; 74 }; 75 ina226-u87 { 76 compatible = "iio-hwmon"; 77 io-channels = <&u87 0>, <&u87 1>, <&u87 2>, <&u87 3>; 78 }; 79 ina226-u85 { 80 compatible = "iio-hwmon"; 81 io-channels = <&u85 0>, <&u85 1>, <&u85 2>, <&u85 3>; 82 }; 83 ina226-u86 { 84 compatible = "iio-hwmon"; 85 io-channels = <&u86 0>, <&u86 1>, <&u86 2>, <&u86 3>; 86 }; 87 ina226-u93 { 88 compatible = "iio-hwmon"; 89 io-channels = <&u93 0>, <&u93 1>, <&u93 2>, <&u93 3>; 90 }; 91 ina226-u88 { 92 compatible = "iio-hwmon"; 93 io-channels = <&u88 0>, <&u88 1>, <&u88 2>, <&u88 3>; 94 }; 95 ina226-u15 { 96 compatible = "iio-hwmon"; 97 io-channels = <&u15 0>, <&u15 1>, <&u15 2>, <&u15 3>; 98 }; 99 ina226-u92 { 100 compatible = "iio-hwmon"; 101 io-channels = <&u92 0>, <&u92 1>, <&u92 2>, <&u92 3>; 102 }; 103 ina226-u79 { 104 compatible = "iio-hwmon"; 105 io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>; 106 }; 107 ina226-u81 { 108 compatible = "iio-hwmon"; 109 io-channels = <&u81 0>, <&u81 1>, <&u81 2>, <&u81 3>; 110 }; 111 ina226-u80 { 112 compatible = "iio-hwmon"; 113 io-channels = <&u80 0>, <&u80 1>, <&u80 2>, <&u80 3>; 114 }; 115 ina226-u84 { 116 compatible = "iio-hwmon"; 117 io-channels = <&u84 0>, <&u84 1>, <&u84 2>, <&u84 3>; 118 }; 119 ina226-u16 { 120 compatible = "iio-hwmon"; 121 io-channels = <&u16 0>, <&u16 1>, <&u16 2>, <&u16 3>; 122 }; 123 ina226-u65 { 124 compatible = "iio-hwmon"; 125 io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>; 126 }; 127 ina226-u74 { 128 compatible = "iio-hwmon"; 129 io-channels = <&u74 0>, <&u74 1>, <&u74 2>, <&u74 3>; 130 }; 131 ina226-u75 { 132 compatible = "iio-hwmon"; 133 io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>; 134 }; 135}; 136 137&can1 { 138 status = "okay"; 139}; 140 141&dcc { 142 status = "okay"; 143}; 144 145&fpd_dma_chan1 { 146 status = "okay"; 147}; 148 149&fpd_dma_chan2 { 150 status = "okay"; 151}; 152 153&fpd_dma_chan3 { 154 status = "okay"; 155}; 156 157&fpd_dma_chan4 { 158 status = "okay"; 159}; 160 161&fpd_dma_chan5 { 162 status = "okay"; 163}; 164 165&fpd_dma_chan6 { 166 status = "okay"; 167}; 168 169&fpd_dma_chan7 { 170 status = "okay"; 171}; 172 173&fpd_dma_chan8 { 174 status = "okay"; 175}; 176 177&gem3 { 178 status = "okay"; 179 phy-handle = <&phy0>; 180 phy-mode = "rgmii-id"; 181 phy0: ethernet-phy@21 { 182 reg = <21>; 183 ti,rx-internal-delay = <0x8>; 184 ti,tx-internal-delay = <0xa>; 185 ti,fifo-depth = <0x1>; 186 ti,dp83867-rxctrl-strap-quirk; 187 }; 188}; 189 190&gpio { 191 status = "okay"; 192}; 193 194&i2c0 { 195 status = "okay"; 196 clock-frequency = <400000>; 197 198 tca6416_u97: gpio@20 { 199 compatible = "ti,tca6416"; 200 reg = <0x20>; 201 gpio-controller; /* IRQ not connected */ 202 #gpio-cells = <2>; 203 gpio-line-names = "PS_GTR_LAN_SEL0", "PS_GTR_LAN_SEL1", "PS_GTR_LAN_SEL2", "PS_GTR_LAN_SEL3", 204 "PCI_CLK_DIR_SEL", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B", 205 "", "", "", "", "", "", "", "", ""; 206 gtr-sel0 { 207 gpio-hog; 208 gpios = <0 0>; 209 output-low; /* PCIE = 0, DP = 1 */ 210 line-name = "sel0"; 211 }; 212 gtr-sel1 { 213 gpio-hog; 214 gpios = <1 0>; 215 output-high; /* PCIE = 0, DP = 1 */ 216 line-name = "sel1"; 217 }; 218 gtr-sel2 { 219 gpio-hog; 220 gpios = <2 0>; 221 output-high; /* PCIE = 0, USB0 = 1 */ 222 line-name = "sel2"; 223 }; 224 gtr-sel3 { 225 gpio-hog; 226 gpios = <3 0>; 227 output-high; /* PCIE = 0, SATA = 1 */ 228 line-name = "sel3"; 229 }; 230 }; 231 232 tca6416_u61: gpio@21 { 233 compatible = "ti,tca6416"; 234 reg = <0x21>; 235 gpio-controller; /* IRQ not connected */ 236 #gpio-cells = <2>; 237 gpio-line-names = "VCCPSPLL_EN", "MGTRAVCC_EN", "MGTRAVTT_EN", "VCCPSDDRPLL_EN", "MIO26_PMU_INPUT_LS", 238 "PL_PMBUS_ALERT", "PS_PMBUS_ALERT", "MAXIM_PMBUS_ALERT", "PL_DDR4_VTERM_EN", 239 "PL_DDR4_VPP_2V5_EN", "PS_DIMM_VDDQ_TO_PSVCCO_ON", "PS_DIMM_SUSPEND_EN", 240 "PS_DDR4_VTERM_EN", "PS_DDR4_VPP_2V5_EN", "", ""; 241 }; 242 243 i2c-mux@75 { /* u60 */ 244 compatible = "nxp,pca9544"; 245 #address-cells = <1>; 246 #size-cells = <0>; 247 reg = <0x75>; 248 i2c@0 { 249 #address-cells = <1>; 250 #size-cells = <0>; 251 reg = <0>; 252 /* PS_PMBUS */ 253 u76: ina226@40 { /* u76 */ 254 compatible = "ti,ina226"; 255 #io-channel-cells = <1>; 256 label = "ina226-u76"; 257 reg = <0x40>; 258 shunt-resistor = <5000>; 259 }; 260 u77: ina226@41 { /* u77 */ 261 compatible = "ti,ina226"; 262 #io-channel-cells = <1>; 263 label = "ina226-u77"; 264 reg = <0x41>; 265 shunt-resistor = <5000>; 266 }; 267 u78: ina226@42 { /* u78 */ 268 compatible = "ti,ina226"; 269 #io-channel-cells = <1>; 270 label = "ina226-u78"; 271 reg = <0x42>; 272 shunt-resistor = <5000>; 273 }; 274 u87: ina226@43 { /* u87 */ 275 compatible = "ti,ina226"; 276 #io-channel-cells = <1>; 277 label = "ina226-u87"; 278 reg = <0x43>; 279 shunt-resistor = <5000>; 280 }; 281 u85: ina226@44 { /* u85 */ 282 compatible = "ti,ina226"; 283 #io-channel-cells = <1>; 284 label = "ina226-u85"; 285 reg = <0x44>; 286 shunt-resistor = <5000>; 287 }; 288 u86: ina226@45 { /* u86 */ 289 compatible = "ti,ina226"; 290 #io-channel-cells = <1>; 291 label = "ina226-u86"; 292 reg = <0x45>; 293 shunt-resistor = <5000>; 294 }; 295 u93: ina226@46 { /* u93 */ 296 compatible = "ti,ina226"; 297 #io-channel-cells = <1>; 298 label = "ina226-u93"; 299 reg = <0x46>; 300 shunt-resistor = <5000>; 301 }; 302 u88: ina226@47 { /* u88 */ 303 compatible = "ti,ina226"; 304 #io-channel-cells = <1>; 305 label = "ina226-u88"; 306 reg = <0x47>; 307 shunt-resistor = <5000>; 308 }; 309 u15: ina226@4a { /* u15 */ 310 compatible = "ti,ina226"; 311 #io-channel-cells = <1>; 312 label = "ina226-u15"; 313 reg = <0x4a>; 314 shunt-resistor = <5000>; 315 }; 316 u92: ina226@4b { /* u92 */ 317 compatible = "ti,ina226"; 318 #io-channel-cells = <1>; 319 label = "ina226-u92"; 320 reg = <0x4b>; 321 shunt-resistor = <5000>; 322 }; 323 }; 324 i2c@1 { 325 #address-cells = <1>; 326 #size-cells = <0>; 327 reg = <1>; 328 /* PL_PMBUS */ 329 u79: ina226@40 { /* u79 */ 330 compatible = "ti,ina226"; 331 #io-channel-cells = <1>; 332 label = "ina226-u79"; 333 reg = <0x40>; 334 shunt-resistor = <2000>; 335 }; 336 u81: ina226@41 { /* u81 */ 337 compatible = "ti,ina226"; 338 #io-channel-cells = <1>; 339 label = "ina226-u81"; 340 reg = <0x41>; 341 shunt-resistor = <5000>; 342 }; 343 u80: ina226@42 { /* u80 */ 344 compatible = "ti,ina226"; 345 #io-channel-cells = <1>; 346 label = "ina226-u80"; 347 reg = <0x42>; 348 shunt-resistor = <5000>; 349 }; 350 u84: ina226@43 { /* u84 */ 351 compatible = "ti,ina226"; 352 #io-channel-cells = <1>; 353 label = "ina226-u84"; 354 reg = <0x43>; 355 shunt-resistor = <5000>; 356 }; 357 u16: ina226@44 { /* u16 */ 358 compatible = "ti,ina226"; 359 #io-channel-cells = <1>; 360 label = "ina226-u16"; 361 reg = <0x44>; 362 shunt-resistor = <5000>; 363 }; 364 u65: ina226@45 { /* u65 */ 365 compatible = "ti,ina226"; 366 #io-channel-cells = <1>; 367 label = "ina226-u65"; 368 reg = <0x45>; 369 shunt-resistor = <5000>; 370 }; 371 u74: ina226@46 { /* u74 */ 372 compatible = "ti,ina226"; 373 #io-channel-cells = <1>; 374 label = "ina226-u74"; 375 reg = <0x46>; 376 shunt-resistor = <5000>; 377 }; 378 u75: ina226@47 { /* u75 */ 379 compatible = "ti,ina226"; 380 #io-channel-cells = <1>; 381 label = "ina226-u75"; 382 reg = <0x47>; 383 shunt-resistor = <5000>; 384 }; 385 }; 386 i2c@2 { 387 #address-cells = <1>; 388 #size-cells = <0>; 389 reg = <2>; 390 /* MAXIM_PMBUS - 00 */ 391 max15301@a { /* u46 */ 392 compatible = "maxim,max15301"; 393 reg = <0xa>; 394 }; 395 max15303@b { /* u4 */ 396 compatible = "maxim,max15303"; 397 reg = <0xb>; 398 }; 399 max15303@10 { /* u13 */ 400 compatible = "maxim,max15303"; 401 reg = <0x10>; 402 }; 403 max15301@13 { /* u47 */ 404 compatible = "maxim,max15301"; 405 reg = <0x13>; 406 }; 407 max15303@14 { /* u7 */ 408 compatible = "maxim,max15303"; 409 reg = <0x14>; 410 }; 411 max15303@15 { /* u6 */ 412 compatible = "maxim,max15303"; 413 reg = <0x15>; 414 }; 415 max15303@16 { /* u10 */ 416 compatible = "maxim,max15303"; 417 reg = <0x16>; 418 }; 419 max15303@17 { /* u9 */ 420 compatible = "maxim,max15303"; 421 reg = <0x17>; 422 }; 423 max15301@18 { /* u63 */ 424 compatible = "maxim,max15301"; 425 reg = <0x18>; 426 }; 427 max15303@1a { /* u49 */ 428 compatible = "maxim,max15303"; 429 reg = <0x1a>; 430 }; 431 max15303@1d { /* u18 */ 432 compatible = "maxim,max15303"; 433 reg = <0x1d>; 434 }; 435 max15303@20 { /* u8 */ 436 compatible = "maxim,max15303"; 437 status = "disabled"; /* unreachable */ 438 reg = <0x20>; 439 }; 440 441 max20751@72 { /* u95 */ 442 compatible = "maxim,max20751"; 443 reg = <0x72>; 444 }; 445 max20751@73 { /* u96 */ 446 compatible = "maxim,max20751"; 447 reg = <0x73>; 448 }; 449 }; 450 /* Bus 3 is not connected */ 451 }; 452}; 453 454&i2c1 { 455 status = "okay"; 456 clock-frequency = <400000>; 457 458 /* PL i2c via PCA9306 - u45 */ 459 i2c-mux@74 { /* u34 */ 460 compatible = "nxp,pca9548"; 461 #address-cells = <1>; 462 #size-cells = <0>; 463 reg = <0x74>; 464 i2c@0 { 465 #address-cells = <1>; 466 #size-cells = <0>; 467 reg = <0>; 468 /* 469 * IIC_EEPROM 1kB memory which uses 256B blocks 470 * where every block has different address. 471 * 0 - 256B address 0x54 472 * 256B - 512B address 0x55 473 * 512B - 768B address 0x56 474 * 768B - 1024B address 0x57 475 */ 476 eeprom: eeprom@54 { /* u23 */ 477 compatible = "atmel,24c08"; 478 reg = <0x54>; 479 }; 480 }; 481 i2c@1 { 482 #address-cells = <1>; 483 #size-cells = <0>; 484 reg = <1>; 485 si5341: clock-generator@36 { /* SI5341 - u69 */ 486 reg = <0x36>; 487 }; 488 489 }; 490 i2c@2 { 491 #address-cells = <1>; 492 #size-cells = <0>; 493 reg = <2>; 494 si570_1: clock-generator@5d { /* USER SI570 - u42 */ 495 #clock-cells = <0>; 496 compatible = "silabs,si570"; 497 reg = <0x5d>; 498 temperature-stability = <50>; 499 factory-fout = <300000000>; 500 clock-frequency = <300000000>; 501 clock-output-names = "si570_user"; 502 }; 503 }; 504 i2c@3 { 505 #address-cells = <1>; 506 #size-cells = <0>; 507 reg = <3>; 508 si570_2: clock-generator@5d { /* USER MGT SI570 - u56 */ 509 #clock-cells = <0>; 510 compatible = "silabs,si570"; 511 reg = <0x5d>; 512 temperature-stability = <50>; /* copy from zc702 */ 513 factory-fout = <156250000>; 514 clock-frequency = <148500000>; 515 clock-output-names = "si570_mgt"; 516 }; 517 }; 518 i2c@4 { 519 #address-cells = <1>; 520 #size-cells = <0>; 521 reg = <4>; 522 si5328: clock-generator@69 {/* SI5328 - u20 */ 523 reg = <0x69>; 524 /* 525 * Chip has interrupt present connected to PL 526 * interrupt-parent = <&>; 527 * interrupts = <>; 528 */ 529 }; 530 }; 531 /* 5 - 7 unconnected */ 532 }; 533 534 i2c-mux@75 { 535 compatible = "nxp,pca9548"; /* u135 */ 536 #address-cells = <1>; 537 #size-cells = <0>; 538 reg = <0x75>; 539 540 i2c@0 { 541 #address-cells = <1>; 542 #size-cells = <0>; 543 reg = <0>; 544 /* HPC0_IIC */ 545 }; 546 i2c@1 { 547 #address-cells = <1>; 548 #size-cells = <0>; 549 reg = <1>; 550 /* HPC1_IIC */ 551 }; 552 i2c@2 { 553 #address-cells = <1>; 554 #size-cells = <0>; 555 reg = <2>; 556 /* SYSMON */ 557 }; 558 i2c@3 { 559 #address-cells = <1>; 560 #size-cells = <0>; 561 reg = <3>; 562 /* DDR4 SODIMM */ 563 }; 564 i2c@4 { 565 #address-cells = <1>; 566 #size-cells = <0>; 567 reg = <4>; 568 /* SEP 3 */ 569 }; 570 i2c@5 { 571 #address-cells = <1>; 572 #size-cells = <0>; 573 reg = <5>; 574 /* SEP 2 */ 575 }; 576 i2c@6 { 577 #address-cells = <1>; 578 #size-cells = <0>; 579 reg = <6>; 580 /* SEP 1 */ 581 }; 582 i2c@7 { 583 #address-cells = <1>; 584 #size-cells = <0>; 585 reg = <7>; 586 /* SEP 0 */ 587 }; 588 }; 589}; 590 591&pcie { 592 status = "okay"; 593}; 594 595&rtc { 596 status = "okay"; 597}; 598 599&sata { 600 status = "okay"; 601 /* SATA OOB timing settings */ 602 ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; 603 ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; 604 ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; 605 ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; 606 ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; 607 ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; 608 ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; 609 ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; 610}; 611 612/* SD1 with level shifter */ 613&sdhci1 { 614 status = "okay"; 615 no-1-8-v; 616}; 617 618&uart0 { 619 status = "okay"; 620}; 621 622&uart1 { 623 status = "okay"; 624}; 625 626/* ULPI SMSC USB3320 */ 627&usb0 { 628 status = "okay"; 629 dr_mode = "host"; 630}; 631 632&watchdog0 { 633 status = "okay"; 634}; 635