1// SPDX-License-Identifier: GPL-2.0+ 2/* 3 * dts file for Xilinx ZynqMP ZCU102 RevA 4 * 5 * (C) Copyright 2015 - 2021, Xilinx, Inc. 6 * 7 * Michal Simek <michal.simek@xilinx.com> 8 */ 9 10/dts-v1/; 11 12#include "zynqmp.dtsi" 13#include "zynqmp-clk-ccf.dtsi" 14#include <dt-bindings/input/input.h> 15#include <dt-bindings/gpio/gpio.h> 16#include <dt-bindings/pinctrl/pinctrl-zynqmp.h> 17#include <dt-bindings/phy/phy.h> 18 19/ { 20 model = "ZynqMP ZCU102 RevA"; 21 compatible = "xlnx,zynqmp-zcu102-revA", "xlnx,zynqmp-zcu102", "xlnx,zynqmp"; 22 23 aliases { 24 ethernet0 = &gem3; 25 i2c0 = &i2c0; 26 i2c1 = &i2c1; 27 mmc0 = &sdhci1; 28 nvmem0 = &eeprom; 29 rtc0 = &rtc; 30 serial0 = &uart0; 31 serial1 = &uart1; 32 serial2 = &dcc; 33 spi0 = &qspi; 34 usb0 = &usb0; 35 }; 36 37 chosen { 38 bootargs = "earlycon"; 39 stdout-path = "serial0:115200n8"; 40 }; 41 42 memory@0 { 43 device_type = "memory"; 44 reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; 45 }; 46 47 gpio-keys { 48 compatible = "gpio-keys"; 49 autorepeat; 50 switch-19 { 51 label = "sw19"; 52 gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; 53 linux,code = <KEY_DOWN>; 54 wakeup-source; 55 autorepeat; 56 }; 57 }; 58 59 leds { 60 compatible = "gpio-leds"; 61 heartbeat-led { 62 label = "heartbeat"; 63 gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; 64 linux,default-trigger = "heartbeat"; 65 }; 66 }; 67 68 ina226-u76 { 69 compatible = "iio-hwmon"; 70 io-channels = <&u76 0>, <&u76 1>, <&u76 2>, <&u76 3>; 71 }; 72 ina226-u77 { 73 compatible = "iio-hwmon"; 74 io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>; 75 }; 76 ina226-u78 { 77 compatible = "iio-hwmon"; 78 io-channels = <&u78 0>, <&u78 1>, <&u78 2>, <&u78 3>; 79 }; 80 ina226-u87 { 81 compatible = "iio-hwmon"; 82 io-channels = <&u87 0>, <&u87 1>, <&u87 2>, <&u87 3>; 83 }; 84 ina226-u85 { 85 compatible = "iio-hwmon"; 86 io-channels = <&u85 0>, <&u85 1>, <&u85 2>, <&u85 3>; 87 }; 88 ina226-u86 { 89 compatible = "iio-hwmon"; 90 io-channels = <&u86 0>, <&u86 1>, <&u86 2>, <&u86 3>; 91 }; 92 ina226-u93 { 93 compatible = "iio-hwmon"; 94 io-channels = <&u93 0>, <&u93 1>, <&u93 2>, <&u93 3>; 95 }; 96 ina226-u88 { 97 compatible = "iio-hwmon"; 98 io-channels = <&u88 0>, <&u88 1>, <&u88 2>, <&u88 3>; 99 }; 100 ina226-u15 { 101 compatible = "iio-hwmon"; 102 io-channels = <&u15 0>, <&u15 1>, <&u15 2>, <&u15 3>; 103 }; 104 ina226-u92 { 105 compatible = "iio-hwmon"; 106 io-channels = <&u92 0>, <&u92 1>, <&u92 2>, <&u92 3>; 107 }; 108 ina226-u79 { 109 compatible = "iio-hwmon"; 110 io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>; 111 }; 112 ina226-u81 { 113 compatible = "iio-hwmon"; 114 io-channels = <&u81 0>, <&u81 1>, <&u81 2>, <&u81 3>; 115 }; 116 ina226-u80 { 117 compatible = "iio-hwmon"; 118 io-channels = <&u80 0>, <&u80 1>, <&u80 2>, <&u80 3>; 119 }; 120 ina226-u84 { 121 compatible = "iio-hwmon"; 122 io-channels = <&u84 0>, <&u84 1>, <&u84 2>, <&u84 3>; 123 }; 124 ina226-u16 { 125 compatible = "iio-hwmon"; 126 io-channels = <&u16 0>, <&u16 1>, <&u16 2>, <&u16 3>; 127 }; 128 ina226-u65 { 129 compatible = "iio-hwmon"; 130 io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>; 131 }; 132 ina226-u74 { 133 compatible = "iio-hwmon"; 134 io-channels = <&u74 0>, <&u74 1>, <&u74 2>, <&u74 3>; 135 }; 136 ina226-u75 { 137 compatible = "iio-hwmon"; 138 io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>; 139 }; 140 141 /* 48MHz reference crystal */ 142 ref48: ref48M { 143 compatible = "fixed-clock"; 144 #clock-cells = <0>; 145 clock-frequency = <48000000>; 146 }; 147 148 refhdmi: refhdmi { 149 compatible = "fixed-clock"; 150 #clock-cells = <0>; 151 clock-frequency = <114285000>; 152 }; 153}; 154 155&can1 { 156 status = "okay"; 157 pinctrl-names = "default"; 158 pinctrl-0 = <&pinctrl_can1_default>; 159}; 160 161&dcc { 162 status = "okay"; 163}; 164 165&fpd_dma_chan1 { 166 status = "okay"; 167}; 168 169&fpd_dma_chan2 { 170 status = "okay"; 171}; 172 173&fpd_dma_chan3 { 174 status = "okay"; 175}; 176 177&fpd_dma_chan4 { 178 status = "okay"; 179}; 180 181&fpd_dma_chan5 { 182 status = "okay"; 183}; 184 185&fpd_dma_chan6 { 186 status = "okay"; 187}; 188 189&fpd_dma_chan7 { 190 status = "okay"; 191}; 192 193&fpd_dma_chan8 { 194 status = "okay"; 195}; 196 197&gem3 { 198 status = "okay"; 199 phy-handle = <&phy0>; 200 phy-mode = "rgmii-id"; 201 pinctrl-names = "default"; 202 pinctrl-0 = <&pinctrl_gem3_default>; 203 phy0: ethernet-phy@21 { 204 reg = <21>; 205 ti,rx-internal-delay = <0x8>; 206 ti,tx-internal-delay = <0xa>; 207 ti,fifo-depth = <0x1>; 208 ti,dp83867-rxctrl-strap-quirk; 209 /* reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>; */ 210 }; 211}; 212 213&gpio { 214 status = "okay"; 215 pinctrl-names = "default"; 216 pinctrl-0 = <&pinctrl_gpio_default>; 217}; 218 219&i2c0 { 220 status = "okay"; 221 clock-frequency = <400000>; 222 pinctrl-names = "default", "gpio"; 223 pinctrl-0 = <&pinctrl_i2c0_default>; 224 pinctrl-1 = <&pinctrl_i2c0_gpio>; 225 scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; 226 sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; 227 228 tca6416_u97: gpio@20 { 229 compatible = "ti,tca6416"; 230 reg = <0x20>; 231 gpio-controller; /* IRQ not connected */ 232 #gpio-cells = <2>; 233 gpio-line-names = "PS_GTR_LAN_SEL0", "PS_GTR_LAN_SEL1", "PS_GTR_LAN_SEL2", "PS_GTR_LAN_SEL3", 234 "PCI_CLK_DIR_SEL", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B", 235 "", "", "", "", "", "", "", "", ""; 236 gtr-sel0-hog { 237 gpio-hog; 238 gpios = <0 0>; 239 output-low; /* PCIE = 0, DP = 1 */ 240 line-name = "sel0"; 241 }; 242 gtr-sel1-hog { 243 gpio-hog; 244 gpios = <1 0>; 245 output-high; /* PCIE = 0, DP = 1 */ 246 line-name = "sel1"; 247 }; 248 gtr-sel2-hog { 249 gpio-hog; 250 gpios = <2 0>; 251 output-high; /* PCIE = 0, USB0 = 1 */ 252 line-name = "sel2"; 253 }; 254 gtr-sel3-hog { 255 gpio-hog; 256 gpios = <3 0>; 257 output-high; /* PCIE = 0, SATA = 1 */ 258 line-name = "sel3"; 259 }; 260 }; 261 262 tca6416_u61: gpio@21 { 263 compatible = "ti,tca6416"; 264 reg = <0x21>; 265 gpio-controller; /* IRQ not connected */ 266 #gpio-cells = <2>; 267 gpio-line-names = "VCCPSPLL_EN", "MGTRAVCC_EN", "MGTRAVTT_EN", "VCCPSDDRPLL_EN", "MIO26_PMU_INPUT_LS", 268 "PL_PMBUS_ALERT", "PS_PMBUS_ALERT", "MAXIM_PMBUS_ALERT", "PL_DDR4_VTERM_EN", 269 "PL_DDR4_VPP_2V5_EN", "PS_DIMM_VDDQ_TO_PSVCCO_ON", "PS_DIMM_SUSPEND_EN", 270 "PS_DDR4_VTERM_EN", "PS_DDR4_VPP_2V5_EN", "", ""; 271 }; 272 273 i2c-mux@75 { /* u60 */ 274 compatible = "nxp,pca9544"; 275 #address-cells = <1>; 276 #size-cells = <0>; 277 reg = <0x75>; 278 i2c@0 { 279 #address-cells = <1>; 280 #size-cells = <0>; 281 reg = <0>; 282 /* PS_PMBUS */ 283 u76: ina226@40 { /* u76 */ 284 compatible = "ti,ina226"; 285 #io-channel-cells = <1>; 286 label = "ina226-u76"; 287 reg = <0x40>; 288 shunt-resistor = <5000>; 289 }; 290 u77: ina226@41 { /* u77 */ 291 compatible = "ti,ina226"; 292 #io-channel-cells = <1>; 293 label = "ina226-u77"; 294 reg = <0x41>; 295 shunt-resistor = <5000>; 296 }; 297 u78: ina226@42 { /* u78 */ 298 compatible = "ti,ina226"; 299 #io-channel-cells = <1>; 300 label = "ina226-u78"; 301 reg = <0x42>; 302 shunt-resistor = <5000>; 303 }; 304 u87: ina226@43 { /* u87 */ 305 compatible = "ti,ina226"; 306 #io-channel-cells = <1>; 307 label = "ina226-u87"; 308 reg = <0x43>; 309 shunt-resistor = <5000>; 310 }; 311 u85: ina226@44 { /* u85 */ 312 compatible = "ti,ina226"; 313 #io-channel-cells = <1>; 314 label = "ina226-u85"; 315 reg = <0x44>; 316 shunt-resistor = <5000>; 317 }; 318 u86: ina226@45 { /* u86 */ 319 compatible = "ti,ina226"; 320 #io-channel-cells = <1>; 321 label = "ina226-u86"; 322 reg = <0x45>; 323 shunt-resistor = <5000>; 324 }; 325 u93: ina226@46 { /* u93 */ 326 compatible = "ti,ina226"; 327 #io-channel-cells = <1>; 328 label = "ina226-u93"; 329 reg = <0x46>; 330 shunt-resistor = <5000>; 331 }; 332 u88: ina226@47 { /* u88 */ 333 compatible = "ti,ina226"; 334 #io-channel-cells = <1>; 335 label = "ina226-u88"; 336 reg = <0x47>; 337 shunt-resistor = <5000>; 338 }; 339 u15: ina226@4a { /* u15 */ 340 compatible = "ti,ina226"; 341 #io-channel-cells = <1>; 342 label = "ina226-u15"; 343 reg = <0x4a>; 344 shunt-resistor = <5000>; 345 }; 346 u92: ina226@4b { /* u92 */ 347 compatible = "ti,ina226"; 348 #io-channel-cells = <1>; 349 label = "ina226-u92"; 350 reg = <0x4b>; 351 shunt-resistor = <5000>; 352 }; 353 }; 354 i2c@1 { 355 #address-cells = <1>; 356 #size-cells = <0>; 357 reg = <1>; 358 /* PL_PMBUS */ 359 u79: ina226@40 { /* u79 */ 360 compatible = "ti,ina226"; 361 #io-channel-cells = <1>; 362 label = "ina226-u79"; 363 reg = <0x40>; 364 shunt-resistor = <2000>; 365 }; 366 u81: ina226@41 { /* u81 */ 367 compatible = "ti,ina226"; 368 #io-channel-cells = <1>; 369 label = "ina226-u81"; 370 reg = <0x41>; 371 shunt-resistor = <5000>; 372 }; 373 u80: ina226@42 { /* u80 */ 374 compatible = "ti,ina226"; 375 #io-channel-cells = <1>; 376 label = "ina226-u80"; 377 reg = <0x42>; 378 shunt-resistor = <5000>; 379 }; 380 u84: ina226@43 { /* u84 */ 381 compatible = "ti,ina226"; 382 #io-channel-cells = <1>; 383 label = "ina226-u84"; 384 reg = <0x43>; 385 shunt-resistor = <5000>; 386 }; 387 u16: ina226@44 { /* u16 */ 388 compatible = "ti,ina226"; 389 #io-channel-cells = <1>; 390 label = "ina226-u16"; 391 reg = <0x44>; 392 shunt-resistor = <5000>; 393 }; 394 u65: ina226@45 { /* u65 */ 395 compatible = "ti,ina226"; 396 #io-channel-cells = <1>; 397 label = "ina226-u65"; 398 reg = <0x45>; 399 shunt-resistor = <5000>; 400 }; 401 u74: ina226@46 { /* u74 */ 402 compatible = "ti,ina226"; 403 #io-channel-cells = <1>; 404 label = "ina226-u74"; 405 reg = <0x46>; 406 shunt-resistor = <5000>; 407 }; 408 u75: ina226@47 { /* u75 */ 409 compatible = "ti,ina226"; 410 #io-channel-cells = <1>; 411 label = "ina226-u75"; 412 reg = <0x47>; 413 shunt-resistor = <5000>; 414 }; 415 }; 416 i2c@2 { 417 #address-cells = <1>; 418 #size-cells = <0>; 419 reg = <2>; 420 /* MAXIM_PMBUS - 00 */ 421 max15301@a { /* u46 */ 422 compatible = "maxim,max15301"; 423 reg = <0xa>; 424 }; 425 max15303@b { /* u4 */ 426 compatible = "maxim,max15303"; 427 reg = <0xb>; 428 }; 429 max15303@10 { /* u13 */ 430 compatible = "maxim,max15303"; 431 reg = <0x10>; 432 }; 433 max15301@13 { /* u47 */ 434 compatible = "maxim,max15301"; 435 reg = <0x13>; 436 }; 437 max15303@14 { /* u7 */ 438 compatible = "maxim,max15303"; 439 reg = <0x14>; 440 }; 441 max15303@15 { /* u6 */ 442 compatible = "maxim,max15303"; 443 reg = <0x15>; 444 }; 445 max15303@16 { /* u10 */ 446 compatible = "maxim,max15303"; 447 reg = <0x16>; 448 }; 449 max15303@17 { /* u9 */ 450 compatible = "maxim,max15303"; 451 reg = <0x17>; 452 }; 453 max15301@18 { /* u63 */ 454 compatible = "maxim,max15301"; 455 reg = <0x18>; 456 }; 457 max15303@1a { /* u49 */ 458 compatible = "maxim,max15303"; 459 reg = <0x1a>; 460 }; 461 max15303@1d { /* u18 */ 462 compatible = "maxim,max15303"; 463 reg = <0x1d>; 464 }; 465 max15303@20 { /* u8 */ 466 compatible = "maxim,max15303"; 467 status = "disabled"; /* unreachable */ 468 reg = <0x20>; 469 }; 470 max20751@72 { /* u95 */ 471 compatible = "maxim,max20751"; 472 reg = <0x72>; 473 }; 474 max20751@73 { /* u96 */ 475 compatible = "maxim,max20751"; 476 reg = <0x73>; 477 }; 478 }; 479 /* Bus 3 is not connected */ 480 }; 481}; 482 483&i2c1 { 484 status = "okay"; 485 clock-frequency = <400000>; 486 pinctrl-names = "default", "gpio"; 487 pinctrl-0 = <&pinctrl_i2c1_default>; 488 pinctrl-1 = <&pinctrl_i2c1_gpio>; 489 scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; 490 sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; 491 492 /* PL i2c via PCA9306 - u45 */ 493 i2c-mux@74 { /* u34 */ 494 compatible = "nxp,pca9548"; 495 #address-cells = <1>; 496 #size-cells = <0>; 497 reg = <0x74>; 498 i2c@0 { 499 #address-cells = <1>; 500 #size-cells = <0>; 501 reg = <0>; 502 /* 503 * IIC_EEPROM 1kB memory which uses 256B blocks 504 * where every block has different address. 505 * 0 - 256B address 0x54 506 * 256B - 512B address 0x55 507 * 512B - 768B address 0x56 508 * 768B - 1024B address 0x57 509 */ 510 eeprom: eeprom@54 { /* u23 */ 511 compatible = "atmel,24c08"; 512 reg = <0x54>; 513 }; 514 }; 515 i2c@1 { 516 #address-cells = <1>; 517 #size-cells = <0>; 518 reg = <1>; 519 si5341: clock-generator@36 { /* SI5341 - u69 */ 520 compatible = "silabs,si5341"; 521 reg = <0x36>; 522 #clock-cells = <2>; 523 #address-cells = <1>; 524 #size-cells = <0>; 525 clocks = <&ref48>; 526 clock-names = "xtal"; 527 clock-output-names = "si5341"; 528 529 si5341_0: out@0 { 530 /* refclk0 for PS-GT, used for DP */ 531 reg = <0>; 532 always-on; 533 }; 534 si5341_2: out@2 { 535 /* refclk2 for PS-GT, used for USB3 */ 536 reg = <2>; 537 always-on; 538 }; 539 si5341_3: out@3 { 540 /* refclk3 for PS-GT, used for SATA */ 541 reg = <3>; 542 always-on; 543 }; 544 si5341_4: out@4 { 545 /* refclk4 for PS-GT, used for PCIE slot */ 546 reg = <4>; 547 always-on; 548 }; 549 si5341_5: out@5 { 550 /* refclk5 for PS-GT, used for PCIE */ 551 reg = <5>; 552 always-on; 553 }; 554 si5341_6: out@6 { 555 /* refclk6 PL CLK125 */ 556 reg = <6>; 557 always-on; 558 }; 559 si5341_7: out@7 { 560 /* refclk7 PL CLK74 */ 561 reg = <7>; 562 always-on; 563 }; 564 si5341_9: out@9 { 565 /* refclk9 used for PS_REF_CLK 33.3 MHz */ 566 reg = <9>; 567 always-on; 568 }; 569 }; 570 }; 571 i2c@2 { 572 #address-cells = <1>; 573 #size-cells = <0>; 574 reg = <2>; 575 si570_1: clock-generator@5d { /* USER SI570 - u42 */ 576 #clock-cells = <0>; 577 compatible = "silabs,si570"; 578 reg = <0x5d>; 579 temperature-stability = <50>; 580 factory-fout = <300000000>; 581 clock-frequency = <300000000>; 582 clock-output-names = "si570_user"; 583 }; 584 }; 585 i2c@3 { 586 #address-cells = <1>; 587 #size-cells = <0>; 588 reg = <3>; 589 si570_2: clock-generator@5d { /* USER MGT SI570 - u56 */ 590 #clock-cells = <0>; 591 compatible = "silabs,si570"; 592 reg = <0x5d>; 593 temperature-stability = <50>; /* copy from zc702 */ 594 factory-fout = <156250000>; 595 clock-frequency = <148500000>; 596 clock-output-names = "si570_mgt"; 597 }; 598 }; 599 i2c@4 { 600 #address-cells = <1>; 601 #size-cells = <0>; 602 reg = <4>; 603 /* SI5328 - u20 */ 604 }; 605 /* 5 - 7 unconnected */ 606 }; 607 608 i2c-mux@75 { 609 compatible = "nxp,pca9548"; /* u135 */ 610 #address-cells = <1>; 611 #size-cells = <0>; 612 reg = <0x75>; 613 614 i2c@0 { 615 #address-cells = <1>; 616 #size-cells = <0>; 617 reg = <0>; 618 /* HPC0_IIC */ 619 }; 620 i2c@1 { 621 #address-cells = <1>; 622 #size-cells = <0>; 623 reg = <1>; 624 /* HPC1_IIC */ 625 }; 626 i2c@2 { 627 #address-cells = <1>; 628 #size-cells = <0>; 629 reg = <2>; 630 /* SYSMON */ 631 }; 632 i2c@3 { 633 #address-cells = <1>; 634 #size-cells = <0>; 635 reg = <3>; 636 /* DDR4 SODIMM */ 637 }; 638 i2c@4 { 639 #address-cells = <1>; 640 #size-cells = <0>; 641 reg = <4>; 642 /* SEP 3 */ 643 }; 644 i2c@5 { 645 #address-cells = <1>; 646 #size-cells = <0>; 647 reg = <5>; 648 /* SEP 2 */ 649 }; 650 i2c@6 { 651 #address-cells = <1>; 652 #size-cells = <0>; 653 reg = <6>; 654 /* SEP 1 */ 655 }; 656 i2c@7 { 657 #address-cells = <1>; 658 #size-cells = <0>; 659 reg = <7>; 660 /* SEP 0 */ 661 }; 662 }; 663}; 664 665&pinctrl0 { 666 status = "okay"; 667 pinctrl_i2c0_default: i2c0-default { 668 mux { 669 groups = "i2c0_3_grp"; 670 function = "i2c0"; 671 }; 672 673 conf { 674 groups = "i2c0_3_grp"; 675 bias-pull-up; 676 slew-rate = <SLEW_RATE_SLOW>; 677 power-source = <IO_STANDARD_LVCMOS18>; 678 }; 679 }; 680 681 pinctrl_i2c0_gpio: i2c0-gpio { 682 mux { 683 groups = "gpio0_14_grp", "gpio0_15_grp"; 684 function = "gpio0"; 685 }; 686 687 conf { 688 groups = "gpio0_14_grp", "gpio0_15_grp"; 689 slew-rate = <SLEW_RATE_SLOW>; 690 power-source = <IO_STANDARD_LVCMOS18>; 691 }; 692 }; 693 694 pinctrl_i2c1_default: i2c1-default { 695 mux { 696 groups = "i2c1_4_grp"; 697 function = "i2c1"; 698 }; 699 700 conf { 701 groups = "i2c1_4_grp"; 702 bias-pull-up; 703 slew-rate = <SLEW_RATE_SLOW>; 704 power-source = <IO_STANDARD_LVCMOS18>; 705 }; 706 }; 707 708 pinctrl_i2c1_gpio: i2c1-gpio { 709 mux { 710 groups = "gpio0_16_grp", "gpio0_17_grp"; 711 function = "gpio0"; 712 }; 713 714 conf { 715 groups = "gpio0_16_grp", "gpio0_17_grp"; 716 slew-rate = <SLEW_RATE_SLOW>; 717 power-source = <IO_STANDARD_LVCMOS18>; 718 }; 719 }; 720 721 pinctrl_uart0_default: uart0-default { 722 mux { 723 groups = "uart0_4_grp"; 724 function = "uart0"; 725 }; 726 727 conf { 728 groups = "uart0_4_grp"; 729 slew-rate = <SLEW_RATE_SLOW>; 730 power-source = <IO_STANDARD_LVCMOS18>; 731 }; 732 733 conf-rx { 734 pins = "MIO18"; 735 bias-high-impedance; 736 }; 737 738 conf-tx { 739 pins = "MIO19"; 740 bias-disable; 741 }; 742 }; 743 744 pinctrl_uart1_default: uart1-default { 745 mux { 746 groups = "uart1_5_grp"; 747 function = "uart1"; 748 }; 749 750 conf { 751 groups = "uart1_5_grp"; 752 slew-rate = <SLEW_RATE_SLOW>; 753 power-source = <IO_STANDARD_LVCMOS18>; 754 }; 755 756 conf-rx { 757 pins = "MIO21"; 758 bias-high-impedance; 759 }; 760 761 conf-tx { 762 pins = "MIO20"; 763 bias-disable; 764 }; 765 }; 766 767 pinctrl_usb0_default: usb0-default { 768 mux { 769 groups = "usb0_0_grp"; 770 function = "usb0"; 771 }; 772 773 conf { 774 groups = "usb0_0_grp"; 775 slew-rate = <SLEW_RATE_SLOW>; 776 power-source = <IO_STANDARD_LVCMOS18>; 777 }; 778 779 conf-rx { 780 pins = "MIO52", "MIO53", "MIO55"; 781 bias-high-impedance; 782 }; 783 784 conf-tx { 785 pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", 786 "MIO60", "MIO61", "MIO62", "MIO63"; 787 bias-disable; 788 }; 789 }; 790 791 pinctrl_gem3_default: gem3-default { 792 mux { 793 function = "ethernet3"; 794 groups = "ethernet3_0_grp"; 795 }; 796 797 conf { 798 groups = "ethernet3_0_grp"; 799 slew-rate = <SLEW_RATE_SLOW>; 800 power-source = <IO_STANDARD_LVCMOS18>; 801 }; 802 803 conf-rx { 804 pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74", 805 "MIO75"; 806 bias-high-impedance; 807 low-power-disable; 808 }; 809 810 conf-tx { 811 pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68", 812 "MIO69"; 813 bias-disable; 814 low-power-enable; 815 }; 816 817 mux-mdio { 818 function = "mdio3"; 819 groups = "mdio3_0_grp"; 820 }; 821 822 conf-mdio { 823 groups = "mdio3_0_grp"; 824 slew-rate = <SLEW_RATE_SLOW>; 825 power-source = <IO_STANDARD_LVCMOS18>; 826 bias-disable; 827 }; 828 }; 829 830 pinctrl_can1_default: can1-default { 831 mux { 832 function = "can1"; 833 groups = "can1_6_grp"; 834 }; 835 836 conf { 837 groups = "can1_6_grp"; 838 slew-rate = <SLEW_RATE_SLOW>; 839 power-source = <IO_STANDARD_LVCMOS18>; 840 }; 841 842 conf-rx { 843 pins = "MIO25"; 844 bias-high-impedance; 845 }; 846 847 conf-tx { 848 pins = "MIO24"; 849 bias-disable; 850 }; 851 }; 852 853 pinctrl_sdhci1_default: sdhci1-default { 854 mux { 855 groups = "sdio1_0_grp"; 856 function = "sdio1"; 857 }; 858 859 conf { 860 groups = "sdio1_0_grp"; 861 slew-rate = <SLEW_RATE_SLOW>; 862 power-source = <IO_STANDARD_LVCMOS18>; 863 bias-disable; 864 }; 865 866 mux-cd { 867 groups = "sdio1_cd_0_grp"; 868 function = "sdio1_cd"; 869 }; 870 871 conf-cd { 872 groups = "sdio1_cd_0_grp"; 873 bias-high-impedance; 874 bias-pull-up; 875 slew-rate = <SLEW_RATE_SLOW>; 876 power-source = <IO_STANDARD_LVCMOS18>; 877 }; 878 879 mux-wp { 880 groups = "sdio1_wp_0_grp"; 881 function = "sdio1_wp"; 882 }; 883 884 conf-wp { 885 groups = "sdio1_wp_0_grp"; 886 bias-high-impedance; 887 bias-pull-up; 888 slew-rate = <SLEW_RATE_SLOW>; 889 power-source = <IO_STANDARD_LVCMOS18>; 890 }; 891 }; 892 893 pinctrl_gpio_default: gpio-default { 894 mux-sw { 895 function = "gpio0"; 896 groups = "gpio0_22_grp", "gpio0_23_grp"; 897 }; 898 899 conf-sw { 900 groups = "gpio0_22_grp", "gpio0_23_grp"; 901 slew-rate = <SLEW_RATE_SLOW>; 902 power-source = <IO_STANDARD_LVCMOS18>; 903 }; 904 905 mux-msp { 906 function = "gpio0"; 907 groups = "gpio0_13_grp", "gpio0_38_grp"; 908 }; 909 910 conf-msp { 911 groups = "gpio0_13_grp", "gpio0_38_grp"; 912 slew-rate = <SLEW_RATE_SLOW>; 913 power-source = <IO_STANDARD_LVCMOS18>; 914 }; 915 916 conf-pull-up { 917 pins = "MIO22", "MIO23"; 918 bias-pull-up; 919 }; 920 921 conf-pull-none { 922 pins = "MIO13", "MIO38"; 923 bias-disable; 924 }; 925 }; 926}; 927 928&pcie { 929 status = "okay"; 930}; 931 932&psgtr { 933 status = "okay"; 934 /* pcie, sata, usb3, dp */ 935 clocks = <&si5341 0 5>, <&si5341 0 3>, <&si5341 0 2>, <&si5341 0 0>; 936 clock-names = "ref0", "ref1", "ref2", "ref3"; 937}; 938 939&qspi { 940 status = "okay"; 941 flash@0 { 942 compatible = "m25p80", "jedec,spi-nor"; /* 16MB + 16MB */ 943 #address-cells = <1>; 944 #size-cells = <1>; 945 reg = <0x0>; 946 spi-tx-bus-width = <1>; 947 spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ 948 spi-max-frequency = <108000000>; /* Based on DC1 spec */ 949 }; 950}; 951 952&rtc { 953 status = "okay"; 954}; 955 956&sata { 957 status = "okay"; 958 /* SATA OOB timing settings */ 959 ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; 960 ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; 961 ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; 962 ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; 963 ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; 964 ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; 965 ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; 966 ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; 967 phy-names = "sata-phy"; 968 phys = <&psgtr 3 PHY_TYPE_SATA 1 1>; 969}; 970 971/* SD1 with level shifter */ 972&sdhci1 { 973 status = "okay"; 974 /* 975 * 1.0 revision has level shifter and this property should be 976 * removed for supporting UHS mode 977 */ 978 no-1-8-v; 979 pinctrl-names = "default"; 980 pinctrl-0 = <&pinctrl_sdhci1_default>; 981 xlnx,mio-bank = <1>; 982}; 983 984&uart0 { 985 status = "okay"; 986 pinctrl-names = "default"; 987 pinctrl-0 = <&pinctrl_uart0_default>; 988}; 989 990&uart1 { 991 status = "okay"; 992 pinctrl-names = "default"; 993 pinctrl-0 = <&pinctrl_uart1_default>; 994}; 995 996/* ULPI SMSC USB3320 */ 997&usb0 { 998 status = "okay"; 999 pinctrl-names = "default"; 1000 pinctrl-0 = <&pinctrl_usb0_default>; 1001 phy-names = "usb3-phy"; 1002 phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; 1003}; 1004 1005&dwc3_0 { 1006 status = "okay"; 1007 dr_mode = "host"; 1008 snps,usb3_lpm_capable; 1009 maximum-speed = "super-speed"; 1010}; 1011 1012&watchdog0 { 1013 status = "okay"; 1014}; 1015 1016&zynqmp_dpdma { 1017 status = "okay"; 1018}; 1019 1020&zynqmp_dpsub { 1021 status = "okay"; 1022 phy-names = "dp-phy0"; 1023 phys = <&psgtr 1 PHY_TYPE_DP 0 3>; 1024}; 1025