xref: /openbmc/linux/arch/arm64/boot/dts/qcom/sc7280.dtsi (revision fc4f0273)
1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * sc7280 SoC device tree source
4 *
5 * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
6 */
7
8#include <dt-bindings/clock/qcom,gcc-sc7280.h>
9#include <dt-bindings/clock/qcom,rpmh.h>
10#include <dt-bindings/interconnect/qcom,sc7280.h>
11#include <dt-bindings/interrupt-controller/arm-gic.h>
12#include <dt-bindings/mailbox/qcom-ipcc.h>
13#include <dt-bindings/power/qcom-aoss-qmp.h>
14#include <dt-bindings/power/qcom-rpmpd.h>
15#include <dt-bindings/reset/qcom,sdm845-aoss.h>
16#include <dt-bindings/reset/qcom,sdm845-pdc.h>
17#include <dt-bindings/soc/qcom,rpmh-rsc.h>
18#include <dt-bindings/thermal/thermal.h>
19
20/ {
21	interrupt-parent = <&intc>;
22
23	#address-cells = <2>;
24	#size-cells = <2>;
25
26	chosen { };
27
28	aliases {
29		mmc1 = &sdhc_1;
30		mmc2 = &sdhc_2;
31	};
32
33	clocks {
34		xo_board: xo-board {
35			compatible = "fixed-clock";
36			clock-frequency = <76800000>;
37			#clock-cells = <0>;
38		};
39
40		sleep_clk: sleep-clk {
41			compatible = "fixed-clock";
42			clock-frequency = <32000>;
43			#clock-cells = <0>;
44		};
45	};
46
47	reserved-memory {
48		#address-cells = <2>;
49		#size-cells = <2>;
50		ranges;
51
52		aop_mem: memory@80800000 {
53			reg = <0x0 0x80800000 0x0 0x60000>;
54			no-map;
55		};
56
57		aop_cmd_db_mem: memory@80860000 {
58			reg = <0x0 0x80860000 0x0 0x20000>;
59			compatible = "qcom,cmd-db";
60			no-map;
61		};
62
63		smem_mem: memory@80900000 {
64			reg = <0x0 0x80900000 0x0 0x200000>;
65			no-map;
66		};
67
68		cpucp_mem: memory@80b00000 {
69			no-map;
70			reg = <0x0 0x80b00000 0x0 0x100000>;
71		};
72
73		ipa_fw_mem: memory@8b700000 {
74			reg = <0 0x8b700000 0 0x10000>;
75			no-map;
76		};
77	};
78
79	cpus {
80		#address-cells = <2>;
81		#size-cells = <0>;
82
83		CPU0: cpu@0 {
84			device_type = "cpu";
85			compatible = "arm,kryo";
86			reg = <0x0 0x0>;
87			enable-method = "psci";
88			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
89					   &LITTLE_CPU_SLEEP_1
90					   &CLUSTER_SLEEP_0>;
91			next-level-cache = <&L2_0>;
92			qcom,freq-domain = <&cpufreq_hw 0>;
93			#cooling-cells = <2>;
94			L2_0: l2-cache {
95				compatible = "cache";
96				next-level-cache = <&L3_0>;
97				L3_0: l3-cache {
98					compatible = "cache";
99				};
100			};
101		};
102
103		CPU1: cpu@100 {
104			device_type = "cpu";
105			compatible = "arm,kryo";
106			reg = <0x0 0x100>;
107			enable-method = "psci";
108			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
109					   &LITTLE_CPU_SLEEP_1
110					   &CLUSTER_SLEEP_0>;
111			next-level-cache = <&L2_100>;
112			qcom,freq-domain = <&cpufreq_hw 0>;
113			#cooling-cells = <2>;
114			L2_100: l2-cache {
115				compatible = "cache";
116				next-level-cache = <&L3_0>;
117			};
118		};
119
120		CPU2: cpu@200 {
121			device_type = "cpu";
122			compatible = "arm,kryo";
123			reg = <0x0 0x200>;
124			enable-method = "psci";
125			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
126					   &LITTLE_CPU_SLEEP_1
127					   &CLUSTER_SLEEP_0>;
128			next-level-cache = <&L2_200>;
129			qcom,freq-domain = <&cpufreq_hw 0>;
130			#cooling-cells = <2>;
131			L2_200: l2-cache {
132				compatible = "cache";
133				next-level-cache = <&L3_0>;
134			};
135		};
136
137		CPU3: cpu@300 {
138			device_type = "cpu";
139			compatible = "arm,kryo";
140			reg = <0x0 0x300>;
141			enable-method = "psci";
142			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
143					   &LITTLE_CPU_SLEEP_1
144					   &CLUSTER_SLEEP_0>;
145			next-level-cache = <&L2_300>;
146			qcom,freq-domain = <&cpufreq_hw 0>;
147			#cooling-cells = <2>;
148			L2_300: l2-cache {
149				compatible = "cache";
150				next-level-cache = <&L3_0>;
151			};
152		};
153
154		CPU4: cpu@400 {
155			device_type = "cpu";
156			compatible = "arm,kryo";
157			reg = <0x0 0x400>;
158			enable-method = "psci";
159			cpu-idle-states = <&BIG_CPU_SLEEP_0
160					   &BIG_CPU_SLEEP_1
161					   &CLUSTER_SLEEP_0>;
162			next-level-cache = <&L2_400>;
163			qcom,freq-domain = <&cpufreq_hw 1>;
164			#cooling-cells = <2>;
165			L2_400: l2-cache {
166				compatible = "cache";
167				next-level-cache = <&L3_0>;
168			};
169		};
170
171		CPU5: cpu@500 {
172			device_type = "cpu";
173			compatible = "arm,kryo";
174			reg = <0x0 0x500>;
175			enable-method = "psci";
176			cpu-idle-states = <&BIG_CPU_SLEEP_0
177					   &BIG_CPU_SLEEP_1
178					   &CLUSTER_SLEEP_0>;
179			next-level-cache = <&L2_500>;
180			qcom,freq-domain = <&cpufreq_hw 1>;
181			#cooling-cells = <2>;
182			L2_500: l2-cache {
183				compatible = "cache";
184				next-level-cache = <&L3_0>;
185			};
186		};
187
188		CPU6: cpu@600 {
189			device_type = "cpu";
190			compatible = "arm,kryo";
191			reg = <0x0 0x600>;
192			enable-method = "psci";
193			cpu-idle-states = <&BIG_CPU_SLEEP_0
194					   &BIG_CPU_SLEEP_1
195					   &CLUSTER_SLEEP_0>;
196			next-level-cache = <&L2_600>;
197			qcom,freq-domain = <&cpufreq_hw 1>;
198			#cooling-cells = <2>;
199			L2_600: l2-cache {
200				compatible = "cache";
201				next-level-cache = <&L3_0>;
202			};
203		};
204
205		CPU7: cpu@700 {
206			device_type = "cpu";
207			compatible = "arm,kryo";
208			reg = <0x0 0x700>;
209			enable-method = "psci";
210			cpu-idle-states = <&BIG_CPU_SLEEP_0
211					   &BIG_CPU_SLEEP_1
212					   &CLUSTER_SLEEP_0>;
213			next-level-cache = <&L2_700>;
214			qcom,freq-domain = <&cpufreq_hw 1>;
215			#cooling-cells = <2>;
216			L2_700: l2-cache {
217				compatible = "cache";
218				next-level-cache = <&L3_0>;
219			};
220		};
221
222		idle-states {
223			entry-method = "psci";
224
225			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
226				compatible = "arm,idle-state";
227				idle-state-name = "little-power-down";
228				arm,psci-suspend-param = <0x40000003>;
229				entry-latency-us = <549>;
230				exit-latency-us = <901>;
231				min-residency-us = <1774>;
232				local-timer-stop;
233			};
234
235			LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
236				compatible = "arm,idle-state";
237				idle-state-name = "little-rail-power-down";
238				arm,psci-suspend-param = <0x40000004>;
239				entry-latency-us = <702>;
240				exit-latency-us = <915>;
241				min-residency-us = <4001>;
242				local-timer-stop;
243			};
244
245			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
246				compatible = "arm,idle-state";
247				idle-state-name = "big-power-down";
248				arm,psci-suspend-param = <0x40000003>;
249				entry-latency-us = <523>;
250				exit-latency-us = <1244>;
251				min-residency-us = <2207>;
252				local-timer-stop;
253			};
254
255			BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
256				compatible = "arm,idle-state";
257				idle-state-name = "big-rail-power-down";
258				arm,psci-suspend-param = <0x40000004>;
259				entry-latency-us = <526>;
260				exit-latency-us = <1854>;
261				min-residency-us = <5555>;
262				local-timer-stop;
263			};
264
265			CLUSTER_SLEEP_0: cluster-sleep-0 {
266				compatible = "arm,idle-state";
267				idle-state-name = "cluster-power-down";
268				arm,psci-suspend-param = <0x40003444>;
269				entry-latency-us = <3263>;
270				exit-latency-us = <6562>;
271				min-residency-us = <9926>;
272				local-timer-stop;
273			};
274		};
275	};
276
277	memory@80000000 {
278		device_type = "memory";
279		/* We expect the bootloader to fill in the size */
280		reg = <0 0x80000000 0 0>;
281	};
282
283	firmware {
284		scm {
285			compatible = "qcom,scm-sc7280", "qcom,scm";
286		};
287	};
288
289	clk_virt: interconnect {
290		compatible = "qcom,sc7280-clk-virt";
291		#interconnect-cells = <2>;
292		qcom,bcm-voters = <&apps_bcm_voter>;
293	};
294
295	smem {
296		compatible = "qcom,smem";
297		memory-region = <&smem_mem>;
298		hwlocks = <&tcsr_mutex 3>;
299	};
300
301	smp2p-adsp {
302		compatible = "qcom,smp2p";
303		qcom,smem = <443>, <429>;
304		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
305					     IPCC_MPROC_SIGNAL_SMP2P
306					     IRQ_TYPE_EDGE_RISING>;
307		mboxes = <&ipcc IPCC_CLIENT_LPASS
308				IPCC_MPROC_SIGNAL_SMP2P>;
309
310		qcom,local-pid = <0>;
311		qcom,remote-pid = <2>;
312
313		adsp_smp2p_out: master-kernel {
314			qcom,entry-name = "master-kernel";
315			#qcom,smem-state-cells = <1>;
316		};
317
318		adsp_smp2p_in: slave-kernel {
319			qcom,entry-name = "slave-kernel";
320			interrupt-controller;
321			#interrupt-cells = <2>;
322		};
323	};
324
325	smp2p-cdsp {
326		compatible = "qcom,smp2p";
327		qcom,smem = <94>, <432>;
328		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
329					     IPCC_MPROC_SIGNAL_SMP2P
330					     IRQ_TYPE_EDGE_RISING>;
331		mboxes = <&ipcc IPCC_CLIENT_CDSP
332				IPCC_MPROC_SIGNAL_SMP2P>;
333
334		qcom,local-pid = <0>;
335		qcom,remote-pid = <5>;
336
337		cdsp_smp2p_out: master-kernel {
338			qcom,entry-name = "master-kernel";
339			#qcom,smem-state-cells = <1>;
340		};
341
342		cdsp_smp2p_in: slave-kernel {
343			qcom,entry-name = "slave-kernel";
344			interrupt-controller;
345			#interrupt-cells = <2>;
346		};
347	};
348
349	smp2p-mpss {
350		compatible = "qcom,smp2p";
351		qcom,smem = <435>, <428>;
352		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
353					     IPCC_MPROC_SIGNAL_SMP2P
354					     IRQ_TYPE_EDGE_RISING>;
355		mboxes = <&ipcc IPCC_CLIENT_MPSS
356				IPCC_MPROC_SIGNAL_SMP2P>;
357
358		qcom,local-pid = <0>;
359		qcom,remote-pid = <1>;
360
361		modem_smp2p_out: master-kernel {
362			qcom,entry-name = "master-kernel";
363			#qcom,smem-state-cells = <1>;
364		};
365
366		modem_smp2p_in: slave-kernel {
367			qcom,entry-name = "slave-kernel";
368			interrupt-controller;
369			#interrupt-cells = <2>;
370		};
371
372		ipa_smp2p_out: ipa-ap-to-modem {
373			qcom,entry-name = "ipa";
374			#qcom,smem-state-cells = <1>;
375		};
376
377		ipa_smp2p_in: ipa-modem-to-ap {
378			qcom,entry-name = "ipa";
379			interrupt-controller;
380			#interrupt-cells = <2>;
381		};
382	};
383
384	smp2p-wpss {
385		compatible = "qcom,smp2p";
386		qcom,smem = <617>, <616>;
387		interrupts-extended = <&ipcc IPCC_CLIENT_WPSS
388					     IPCC_MPROC_SIGNAL_SMP2P
389					     IRQ_TYPE_EDGE_RISING>;
390		mboxes = <&ipcc IPCC_CLIENT_WPSS
391				IPCC_MPROC_SIGNAL_SMP2P>;
392
393		qcom,local-pid = <0>;
394		qcom,remote-pid = <13>;
395
396		wpss_smp2p_out: master-kernel {
397			qcom,entry-name = "master-kernel";
398			#qcom,smem-state-cells = <1>;
399		};
400
401		wpss_smp2p_in: slave-kernel {
402			qcom,entry-name = "slave-kernel";
403			interrupt-controller;
404			#interrupt-cells = <2>;
405		};
406	};
407
408	pmu {
409		compatible = "arm,armv8-pmuv3";
410		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
411	};
412
413	psci {
414		compatible = "arm,psci-1.0";
415		method = "smc";
416	};
417
418	soc: soc@0 {
419		#address-cells = <2>;
420		#size-cells = <2>;
421		ranges = <0 0 0 0 0x10 0>;
422		dma-ranges = <0 0 0 0 0x10 0>;
423		compatible = "simple-bus";
424
425		gcc: clock-controller@100000 {
426			compatible = "qcom,gcc-sc7280";
427			reg = <0 0x00100000 0 0x1f0000>;
428			clocks = <&rpmhcc RPMH_CXO_CLK>,
429				 <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
430				 <0>, <0>, <0>, <0>, <0>, <0>;
431			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
432				      "pcie_0_pipe_clk", "pcie_1_pipe-clk",
433				      "ufs_phy_rx_symbol_0_clk", "ufs_phy_rx_symbol_1_clk",
434				      "ufs_phy_tx_symbol_0_clk",
435				      "usb3_phy_wrapper_gcc_usb30_pipe_clk";
436			#clock-cells = <1>;
437			#reset-cells = <1>;
438			#power-domain-cells = <1>;
439		};
440
441		ipcc: mailbox@408000 {
442			compatible = "qcom,sc7280-ipcc", "qcom,ipcc";
443			reg = <0 0x00408000 0 0x1000>;
444			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
445			interrupt-controller;
446			#interrupt-cells = <3>;
447			#mbox-cells = <2>;
448		};
449
450		qfprom: efuse@784000 {
451			compatible = "qcom,sc7280-qfprom", "qcom,qfprom";
452			reg = <0 0x00784000 0 0xa20>,
453			      <0 0x00780000 0 0xa20>,
454			      <0 0x00782000 0 0x120>,
455			      <0 0x00786000 0 0x1fff>;
456			clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>;
457			clock-names = "core";
458			power-domains = <&rpmhpd SC7280_MX>;
459			#address-cells = <1>;
460			#size-cells = <1>;
461		};
462
463		sdhc_1: sdhci@7c4000 {
464			compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
465			status = "disabled";
466
467			reg = <0 0x007c4000 0 0x1000>,
468			      <0 0x007c5000 0 0x1000>;
469			reg-names = "hc", "cqhci";
470
471			iommus = <&apps_smmu 0xc0 0x0>;
472			interrupts = <GIC_SPI 652 IRQ_TYPE_LEVEL_HIGH>,
473				     <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH>;
474			interrupt-names = "hc_irq", "pwr_irq";
475
476			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
477				 <&gcc GCC_SDCC1_AHB_CLK>,
478				 <&rpmhcc RPMH_CXO_CLK>;
479			clock-names = "core", "iface", "xo";
480			interconnects = <&aggre1_noc MASTER_SDCC_1 0 &mc_virt SLAVE_EBI1 0>,
481					<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_SDCC_1 0>;
482			interconnect-names = "sdhc-ddr","cpu-sdhc";
483			power-domains = <&rpmhpd SC7280_CX>;
484			operating-points-v2 = <&sdhc1_opp_table>;
485
486			bus-width = <8>;
487			supports-cqe;
488
489			qcom,dll-config = <0x0007642c>;
490			qcom,ddr-config = <0x80040868>;
491
492			mmc-ddr-1_8v;
493			mmc-hs200-1_8v;
494			mmc-hs400-1_8v;
495			mmc-hs400-enhanced-strobe;
496
497			sdhc1_opp_table: opp-table {
498				compatible = "operating-points-v2";
499
500				opp-100000000 {
501					opp-hz = /bits/ 64 <100000000>;
502					required-opps = <&rpmhpd_opp_low_svs>;
503					opp-peak-kBps = <1800000 400000>;
504					opp-avg-kBps = <100000 0>;
505				};
506
507				opp-384000000 {
508					opp-hz = /bits/ 64 <384000000>;
509					required-opps = <&rpmhpd_opp_nom>;
510					opp-peak-kBps = <5400000 1600000>;
511					opp-avg-kBps = <390000 0>;
512				};
513			};
514
515		};
516
517		qupv3_id_0: geniqup@9c0000 {
518			compatible = "qcom,geni-se-qup";
519			reg = <0 0x009c0000 0 0x2000>;
520			clock-names = "m-ahb", "s-ahb";
521			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
522				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
523			#address-cells = <2>;
524			#size-cells = <2>;
525			ranges;
526			status = "disabled";
527
528			uart5: serial@994000 {
529				compatible = "qcom,geni-debug-uart";
530				reg = <0 0x00994000 0 0x4000>;
531				clock-names = "se";
532				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
533				pinctrl-names = "default";
534				pinctrl-0 = <&qup_uart5_default>;
535				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
536				status = "disabled";
537			};
538		};
539
540		cnoc2: interconnect@1500000 {
541			reg = <0 0x01500000 0 0x1000>;
542			compatible = "qcom,sc7280-cnoc2";
543			#interconnect-cells = <2>;
544			qcom,bcm-voters = <&apps_bcm_voter>;
545		};
546
547		cnoc3: interconnect@1502000 {
548			reg = <0 0x01502000 0 0x1000>;
549			compatible = "qcom,sc7280-cnoc3";
550			#interconnect-cells = <2>;
551			qcom,bcm-voters = <&apps_bcm_voter>;
552		};
553
554		mc_virt: interconnect@1580000 {
555			reg = <0 0x01580000 0 0x4>;
556			compatible = "qcom,sc7280-mc-virt";
557			#interconnect-cells = <2>;
558			qcom,bcm-voters = <&apps_bcm_voter>;
559		};
560
561		system_noc: interconnect@1680000 {
562			reg = <0 0x01680000 0 0x15480>;
563			compatible = "qcom,sc7280-system-noc";
564			#interconnect-cells = <2>;
565			qcom,bcm-voters = <&apps_bcm_voter>;
566		};
567
568		aggre1_noc: interconnect@16e0000 {
569			compatible = "qcom,sc7280-aggre1-noc";
570			reg = <0 0x016e0000 0 0x1c080>;
571			#interconnect-cells = <2>;
572			qcom,bcm-voters = <&apps_bcm_voter>;
573		};
574
575		aggre2_noc: interconnect@1700000 {
576			reg = <0 0x01700000 0 0x2b080>;
577			compatible = "qcom,sc7280-aggre2-noc";
578			#interconnect-cells = <2>;
579			qcom,bcm-voters = <&apps_bcm_voter>;
580		};
581
582		mmss_noc: interconnect@1740000 {
583			reg = <0 0x01740000 0 0x1e080>;
584			compatible = "qcom,sc7280-mmss-noc";
585			#interconnect-cells = <2>;
586			qcom,bcm-voters = <&apps_bcm_voter>;
587		};
588
589		ipa: ipa@1e40000 {
590			compatible = "qcom,sc7280-ipa";
591
592			iommus = <&apps_smmu 0x480 0x0>,
593				 <&apps_smmu 0x482 0x0>;
594			reg = <0 0x1e40000 0 0x8000>,
595			      <0 0x1e50000 0 0x4ad0>,
596			      <0 0x1e04000 0 0x23000>;
597			reg-names = "ipa-reg",
598				    "ipa-shared",
599				    "gsi";
600
601			interrupts-extended = <&intc 0 654 IRQ_TYPE_EDGE_RISING>,
602					      <&intc 0 432 IRQ_TYPE_LEVEL_HIGH>,
603					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
604					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
605			interrupt-names = "ipa",
606					  "gsi",
607					  "ipa-clock-query",
608					  "ipa-setup-ready";
609
610			clocks = <&rpmhcc RPMH_IPA_CLK>;
611			clock-names = "core";
612
613			interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
614					<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_IPA_CFG 0>;
615			interconnect-names = "memory",
616					     "config";
617
618			qcom,smem-states = <&ipa_smp2p_out 0>,
619					   <&ipa_smp2p_out 1>;
620			qcom,smem-state-names = "ipa-clock-enabled-valid",
621						"ipa-clock-enabled";
622
623			status = "disabled";
624		};
625
626		tcsr_mutex: hwlock@1f40000 {
627			compatible = "qcom,tcsr-mutex", "syscon";
628			reg = <0 0x01f40000 0 0x40000>;
629			#hwlock-cells = <1>;
630		};
631
632		lpasscc: lpasscc@3000000 {
633			compatible = "qcom,sc7280-lpasscc";
634			reg = <0 0x03000000 0 0x40>,
635			      <0 0x03c04000 0 0x4>,
636			      <0 0x03389000 0 0x24>;
637			reg-names = "qdsp6ss", "top_cc", "cc";
638			clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>;
639			clock-names = "iface";
640			#clock-cells = <1>;
641		};
642
643		lpass_ag_noc: interconnect@3c40000 {
644			reg = <0 0x03c40000 0 0xf080>;
645			compatible = "qcom,sc7280-lpass-ag-noc";
646			#interconnect-cells = <2>;
647			qcom,bcm-voters = <&apps_bcm_voter>;
648		};
649
650		gpucc: clock-controller@3d90000 {
651			compatible = "qcom,sc7280-gpucc";
652			reg = <0 0x03d90000 0 0x9000>;
653			clocks = <&rpmhcc RPMH_CXO_CLK>,
654				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
655				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
656			clock-names = "bi_tcxo",
657				      "gcc_gpu_gpll0_clk_src",
658				      "gcc_gpu_gpll0_div_clk_src";
659			#clock-cells = <1>;
660			#reset-cells = <1>;
661			#power-domain-cells = <1>;
662		};
663
664		stm@6002000 {
665			compatible = "arm,coresight-stm", "arm,primecell";
666			reg = <0 0x06002000 0 0x1000>,
667			      <0 0x16280000 0 0x180000>;
668			reg-names = "stm-base", "stm-stimulus-base";
669
670			clocks = <&aoss_qmp>;
671			clock-names = "apb_pclk";
672
673			out-ports {
674				port {
675					stm_out: endpoint {
676						remote-endpoint = <&funnel0_in7>;
677					};
678				};
679			};
680		};
681
682		funnel@6041000 {
683			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
684			reg = <0 0x06041000 0 0x1000>;
685
686			clocks = <&aoss_qmp>;
687			clock-names = "apb_pclk";
688
689			out-ports {
690				port {
691					funnel0_out: endpoint {
692						remote-endpoint = <&merge_funnel_in0>;
693					};
694				};
695			};
696
697			in-ports {
698				#address-cells = <1>;
699				#size-cells = <0>;
700
701				port@7 {
702					reg = <7>;
703					funnel0_in7: endpoint {
704						remote-endpoint = <&stm_out>;
705					};
706				};
707			};
708		};
709
710		funnel@6042000 {
711			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
712			reg = <0 0x06042000 0 0x1000>;
713
714			clocks = <&aoss_qmp>;
715			clock-names = "apb_pclk";
716
717			out-ports {
718				port {
719					funnel1_out: endpoint {
720						remote-endpoint = <&merge_funnel_in1>;
721					};
722				};
723			};
724
725			in-ports {
726				#address-cells = <1>;
727				#size-cells = <0>;
728
729				port@4 {
730					reg = <4>;
731					funnel1_in4: endpoint {
732						remote-endpoint = <&apss_merge_funnel_out>;
733					};
734				};
735			};
736		};
737
738		funnel@6045000 {
739			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
740			reg = <0 0x06045000 0 0x1000>;
741
742			clocks = <&aoss_qmp>;
743			clock-names = "apb_pclk";
744
745			out-ports {
746				port {
747					merge_funnel_out: endpoint {
748						remote-endpoint = <&swao_funnel_in>;
749					};
750				};
751			};
752
753			in-ports {
754				#address-cells = <1>;
755				#size-cells = <0>;
756
757				port@0 {
758					reg = <0>;
759					merge_funnel_in0: endpoint {
760						remote-endpoint = <&funnel0_out>;
761					};
762				};
763
764				port@1 {
765					reg = <1>;
766					merge_funnel_in1: endpoint {
767						remote-endpoint = <&funnel1_out>;
768					};
769				};
770			};
771		};
772
773		replicator@6046000 {
774			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
775			reg = <0 0x06046000 0 0x1000>;
776
777			clocks = <&aoss_qmp>;
778			clock-names = "apb_pclk";
779
780			out-ports {
781				port {
782					replicator_out: endpoint {
783						remote-endpoint = <&etr_in>;
784					};
785				};
786			};
787
788			in-ports {
789				port {
790					replicator_in: endpoint {
791						remote-endpoint = <&swao_replicator_out>;
792					};
793				};
794			};
795		};
796
797		etr@6048000 {
798			compatible = "arm,coresight-tmc", "arm,primecell";
799			reg = <0 0x06048000 0 0x1000>;
800			iommus = <&apps_smmu 0x04c0 0>;
801
802			clocks = <&aoss_qmp>;
803			clock-names = "apb_pclk";
804			arm,scatter-gather;
805
806			in-ports {
807				port {
808					etr_in: endpoint {
809						remote-endpoint = <&replicator_out>;
810					};
811				};
812			};
813		};
814
815		funnel@6b04000 {
816			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
817			reg = <0 0x06b04000 0 0x1000>;
818
819			clocks = <&aoss_qmp>;
820			clock-names = "apb_pclk";
821
822			out-ports {
823				port {
824					swao_funnel_out: endpoint {
825						remote-endpoint = <&etf_in>;
826					};
827				};
828			};
829
830			in-ports {
831				#address-cells = <1>;
832				#size-cells = <0>;
833
834				port@7 {
835					reg = <7>;
836					swao_funnel_in: endpoint {
837						remote-endpoint = <&merge_funnel_out>;
838					};
839				};
840			};
841		};
842
843		etf@6b05000 {
844			compatible = "arm,coresight-tmc", "arm,primecell";
845			reg = <0 0x06b05000 0 0x1000>;
846
847			clocks = <&aoss_qmp>;
848			clock-names = "apb_pclk";
849
850			out-ports {
851				port {
852					etf_out: endpoint {
853						remote-endpoint = <&swao_replicator_in>;
854					};
855				};
856			};
857
858			in-ports {
859				port {
860					etf_in: endpoint {
861						remote-endpoint = <&swao_funnel_out>;
862					};
863				};
864			};
865		};
866
867		replicator@6b06000 {
868			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
869			reg = <0 0x06b06000 0 0x1000>;
870
871			clocks = <&aoss_qmp>;
872			clock-names = "apb_pclk";
873			qcom,replicator-loses-context;
874
875			out-ports {
876				port {
877					swao_replicator_out: endpoint {
878						remote-endpoint = <&replicator_in>;
879					};
880				};
881			};
882
883			in-ports {
884				port {
885					swao_replicator_in: endpoint {
886						remote-endpoint = <&etf_out>;
887					};
888				};
889			};
890		};
891
892		etm@7040000 {
893			compatible = "arm,coresight-etm4x", "arm,primecell";
894			reg = <0 0x07040000 0 0x1000>;
895
896			cpu = <&CPU0>;
897
898			clocks = <&aoss_qmp>;
899			clock-names = "apb_pclk";
900			arm,coresight-loses-context-with-cpu;
901			qcom,skip-power-up;
902
903			out-ports {
904				port {
905					etm0_out: endpoint {
906						remote-endpoint = <&apss_funnel_in0>;
907					};
908				};
909			};
910		};
911
912		etm@7140000 {
913			compatible = "arm,coresight-etm4x", "arm,primecell";
914			reg = <0 0x07140000 0 0x1000>;
915
916			cpu = <&CPU1>;
917
918			clocks = <&aoss_qmp>;
919			clock-names = "apb_pclk";
920			arm,coresight-loses-context-with-cpu;
921			qcom,skip-power-up;
922
923			out-ports {
924				port {
925					etm1_out: endpoint {
926						remote-endpoint = <&apss_funnel_in1>;
927					};
928				};
929			};
930		};
931
932		etm@7240000 {
933			compatible = "arm,coresight-etm4x", "arm,primecell";
934			reg = <0 0x07240000 0 0x1000>;
935
936			cpu = <&CPU2>;
937
938			clocks = <&aoss_qmp>;
939			clock-names = "apb_pclk";
940			arm,coresight-loses-context-with-cpu;
941			qcom,skip-power-up;
942
943			out-ports {
944				port {
945					etm2_out: endpoint {
946						remote-endpoint = <&apss_funnel_in2>;
947					};
948				};
949			};
950		};
951
952		etm@7340000 {
953			compatible = "arm,coresight-etm4x", "arm,primecell";
954			reg = <0 0x07340000 0 0x1000>;
955
956			cpu = <&CPU3>;
957
958			clocks = <&aoss_qmp>;
959			clock-names = "apb_pclk";
960			arm,coresight-loses-context-with-cpu;
961			qcom,skip-power-up;
962
963			out-ports {
964				port {
965					etm3_out: endpoint {
966						remote-endpoint = <&apss_funnel_in3>;
967					};
968				};
969			};
970		};
971
972		etm@7440000 {
973			compatible = "arm,coresight-etm4x", "arm,primecell";
974			reg = <0 0x07440000 0 0x1000>;
975
976			cpu = <&CPU4>;
977
978			clocks = <&aoss_qmp>;
979			clock-names = "apb_pclk";
980			arm,coresight-loses-context-with-cpu;
981			qcom,skip-power-up;
982
983			out-ports {
984				port {
985					etm4_out: endpoint {
986						remote-endpoint = <&apss_funnel_in4>;
987					};
988				};
989			};
990		};
991
992		etm@7540000 {
993			compatible = "arm,coresight-etm4x", "arm,primecell";
994			reg = <0 0x07540000 0 0x1000>;
995
996			cpu = <&CPU5>;
997
998			clocks = <&aoss_qmp>;
999			clock-names = "apb_pclk";
1000			arm,coresight-loses-context-with-cpu;
1001			qcom,skip-power-up;
1002
1003			out-ports {
1004				port {
1005					etm5_out: endpoint {
1006						remote-endpoint = <&apss_funnel_in5>;
1007					};
1008				};
1009			};
1010		};
1011
1012		etm@7640000 {
1013			compatible = "arm,coresight-etm4x", "arm,primecell";
1014			reg = <0 0x07640000 0 0x1000>;
1015
1016			cpu = <&CPU6>;
1017
1018			clocks = <&aoss_qmp>;
1019			clock-names = "apb_pclk";
1020			arm,coresight-loses-context-with-cpu;
1021			qcom,skip-power-up;
1022
1023			out-ports {
1024				port {
1025					etm6_out: endpoint {
1026						remote-endpoint = <&apss_funnel_in6>;
1027					};
1028				};
1029			};
1030		};
1031
1032		etm@7740000 {
1033			compatible = "arm,coresight-etm4x", "arm,primecell";
1034			reg = <0 0x07740000 0 0x1000>;
1035
1036			cpu = <&CPU7>;
1037
1038			clocks = <&aoss_qmp>;
1039			clock-names = "apb_pclk";
1040			arm,coresight-loses-context-with-cpu;
1041			qcom,skip-power-up;
1042
1043			out-ports {
1044				port {
1045					etm7_out: endpoint {
1046						remote-endpoint = <&apss_funnel_in7>;
1047					};
1048				};
1049			};
1050		};
1051
1052		funnel@7800000 { /* APSS Funnel */
1053			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1054			reg = <0 0x07800000 0 0x1000>;
1055
1056			clocks = <&aoss_qmp>;
1057			clock-names = "apb_pclk";
1058
1059			out-ports {
1060				port {
1061					apss_funnel_out: endpoint {
1062						remote-endpoint = <&apss_merge_funnel_in>;
1063					};
1064				};
1065			};
1066
1067			in-ports {
1068				#address-cells = <1>;
1069				#size-cells = <0>;
1070
1071				port@0 {
1072					reg = <0>;
1073					apss_funnel_in0: endpoint {
1074						remote-endpoint = <&etm0_out>;
1075					};
1076				};
1077
1078				port@1 {
1079					reg = <1>;
1080					apss_funnel_in1: endpoint {
1081						remote-endpoint = <&etm1_out>;
1082					};
1083				};
1084
1085				port@2 {
1086					reg = <2>;
1087					apss_funnel_in2: endpoint {
1088						remote-endpoint = <&etm2_out>;
1089					};
1090				};
1091
1092				port@3 {
1093					reg = <3>;
1094					apss_funnel_in3: endpoint {
1095						remote-endpoint = <&etm3_out>;
1096					};
1097				};
1098
1099				port@4 {
1100					reg = <4>;
1101					apss_funnel_in4: endpoint {
1102						remote-endpoint = <&etm4_out>;
1103					};
1104				};
1105
1106				port@5 {
1107					reg = <5>;
1108					apss_funnel_in5: endpoint {
1109						remote-endpoint = <&etm5_out>;
1110					};
1111				};
1112
1113				port@6 {
1114					reg = <6>;
1115					apss_funnel_in6: endpoint {
1116						remote-endpoint = <&etm6_out>;
1117					};
1118				};
1119
1120				port@7 {
1121					reg = <7>;
1122					apss_funnel_in7: endpoint {
1123						remote-endpoint = <&etm7_out>;
1124					};
1125				};
1126			};
1127		};
1128
1129		funnel@7810000 {
1130			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1131			reg = <0 0x07810000 0 0x1000>;
1132
1133			clocks = <&aoss_qmp>;
1134			clock-names = "apb_pclk";
1135
1136			out-ports {
1137				port {
1138					apss_merge_funnel_out: endpoint {
1139						remote-endpoint = <&funnel1_in4>;
1140					};
1141				};
1142			};
1143
1144			in-ports {
1145				port {
1146					apss_merge_funnel_in: endpoint {
1147						remote-endpoint = <&apss_funnel_out>;
1148					};
1149				};
1150			};
1151		};
1152
1153		sdhc_2: sdhci@8804000 {
1154			compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
1155			status = "disabled";
1156
1157			reg = <0 0x08804000 0 0x1000>;
1158
1159			iommus = <&apps_smmu 0x100 0x0>;
1160			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
1161				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
1162			interrupt-names = "hc_irq", "pwr_irq";
1163
1164			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
1165				 <&gcc GCC_SDCC2_AHB_CLK>,
1166				 <&rpmhcc RPMH_CXO_CLK>;
1167			clock-names = "core", "iface", "xo";
1168			interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
1169					<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_SDCC_2 0>;
1170			interconnect-names = "sdhc-ddr","cpu-sdhc";
1171			power-domains = <&rpmhpd SC7280_CX>;
1172			operating-points-v2 = <&sdhc2_opp_table>;
1173
1174			bus-width = <4>;
1175
1176			qcom,dll-config = <0x0007642c>;
1177
1178			sdhc2_opp_table: opp-table {
1179				compatible = "operating-points-v2";
1180
1181				opp-100000000 {
1182					opp-hz = /bits/ 64 <100000000>;
1183					required-opps = <&rpmhpd_opp_low_svs>;
1184					opp-peak-kBps = <1800000 400000>;
1185					opp-avg-kBps = <100000 0>;
1186				};
1187
1188				opp-202000000 {
1189					opp-hz = /bits/ 64 <202000000>;
1190					required-opps = <&rpmhpd_opp_nom>;
1191					opp-peak-kBps = <5400000 1600000>;
1192					opp-avg-kBps = <200000 0>;
1193				};
1194			};
1195
1196		};
1197
1198		usb_1_hsphy: phy@88e3000 {
1199			compatible = "qcom,sc7280-usb-hs-phy",
1200				     "qcom,usb-snps-hs-7nm-phy";
1201			reg = <0 0x088e3000 0 0x400>;
1202			status = "disabled";
1203			#phy-cells = <0>;
1204
1205			clocks = <&rpmhcc RPMH_CXO_CLK>;
1206			clock-names = "ref";
1207
1208			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
1209		};
1210
1211		usb_2_hsphy: phy@88e4000 {
1212			compatible = "qcom,sc7280-usb-hs-phy",
1213				     "qcom,usb-snps-hs-7nm-phy";
1214			reg = <0 0x088e4000 0 0x400>;
1215			status = "disabled";
1216			#phy-cells = <0>;
1217
1218			clocks = <&rpmhcc RPMH_CXO_CLK>;
1219			clock-names = "ref";
1220
1221			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
1222		};
1223
1224		usb_1_qmpphy: phy-wrapper@88e9000 {
1225			compatible = "qcom,sc7280-qmp-usb3-dp-phy",
1226				     "qcom,sm8250-qmp-usb3-dp-phy";
1227			reg = <0 0x088e9000 0 0x200>,
1228			      <0 0x088e8000 0 0x40>,
1229			      <0 0x088ea000 0 0x200>;
1230			status = "disabled";
1231			#address-cells = <2>;
1232			#size-cells = <2>;
1233			ranges;
1234
1235			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
1236				 <&rpmhcc RPMH_CXO_CLK>,
1237				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
1238			clock-names = "aux", "ref_clk_src", "com_aux";
1239
1240			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
1241				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
1242			reset-names = "phy", "common";
1243
1244			usb_1_ssphy: usb3-phy@88e9200 {
1245				reg = <0 0x088e9200 0 0x200>,
1246				      <0 0x088e9400 0 0x200>,
1247				      <0 0x088e9c00 0 0x400>,
1248				      <0 0x088e9600 0 0x200>,
1249				      <0 0x088e9800 0 0x200>,
1250				      <0 0x088e9a00 0 0x100>;
1251				#clock-cells = <0>;
1252				#phy-cells = <0>;
1253				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
1254				clock-names = "pipe0";
1255				clock-output-names = "usb3_phy_pipe_clk_src";
1256			};
1257
1258			dp_phy: dp-phy@88ea200 {
1259				reg = <0 0x088ea200 0 0x200>,
1260				      <0 0x088ea400 0 0x200>,
1261				      <0 0x088eac00 0 0x400>,
1262				      <0 0x088ea600 0 0x200>,
1263				      <0 0x088ea800 0 0x200>,
1264				      <0 0x088eaa00 0 0x100>;
1265				#phy-cells = <0>;
1266				#clock-cells = <1>;
1267				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
1268				clock-names = "pipe0";
1269				clock-output-names = "usb3_phy_pipe_clk_src";
1270			};
1271		};
1272
1273		usb_2: usb@8cf8800 {
1274			compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
1275			reg = <0 0x08cf8800 0 0x400>;
1276			status = "disabled";
1277			#address-cells = <2>;
1278			#size-cells = <2>;
1279			ranges;
1280			dma-ranges;
1281
1282			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
1283				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
1284				 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
1285				 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
1286				 <&gcc GCC_USB30_SEC_SLEEP_CLK>;
1287			clock-names = "cfg_noc", "core", "iface","mock_utmi",
1288				      "sleep";
1289
1290			assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
1291					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
1292			assigned-clock-rates = <19200000>, <200000000>;
1293
1294			interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
1295				     <&pdc 13 IRQ_TYPE_EDGE_RISING>,
1296				     <&pdc 12 IRQ_TYPE_EDGE_RISING>;
1297			interrupt-names = "hs_phy_irq",
1298					  "dm_hs_phy_irq", "dp_hs_phy_irq";
1299
1300			power-domains = <&gcc GCC_USB30_SEC_GDSC>;
1301
1302			resets = <&gcc GCC_USB30_SEC_BCR>;
1303
1304			interconnects = <&aggre1_noc MASTER_USB2 0 &mc_virt SLAVE_EBI1 0>,
1305					<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_USB2 0>;
1306			interconnect-names = "usb-ddr", "apps-usb";
1307
1308			usb_2_dwc3: usb@8c00000 {
1309				compatible = "snps,dwc3";
1310				reg = <0 0x08c00000 0 0xe000>;
1311				interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
1312				iommus = <&apps_smmu 0xa0 0x0>;
1313				snps,dis_u2_susphy_quirk;
1314				snps,dis_enblslpm_quirk;
1315				phys = <&usb_2_hsphy>;
1316				phy-names = "usb2-phy";
1317				maximum-speed = "high-speed";
1318			};
1319		};
1320
1321		dc_noc: interconnect@90e0000 {
1322			reg = <0 0x090e0000 0 0x5080>;
1323			compatible = "qcom,sc7280-dc-noc";
1324			#interconnect-cells = <2>;
1325			qcom,bcm-voters = <&apps_bcm_voter>;
1326		};
1327
1328		gem_noc: interconnect@9100000 {
1329			reg = <0 0x9100000 0 0xe2200>;
1330			compatible = "qcom,sc7280-gem-noc";
1331			#interconnect-cells = <2>;
1332			qcom,bcm-voters = <&apps_bcm_voter>;
1333		};
1334
1335		system-cache-controller@9200000 {
1336			compatible = "qcom,sc7280-llcc";
1337			reg = <0 0x09200000 0 0xd0000>, <0 0x09600000 0 0x50000>;
1338			reg-names = "llcc_base", "llcc_broadcast_base";
1339			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
1340		};
1341
1342		nsp_noc: interconnect@a0c0000 {
1343			reg = <0 0x0a0c0000 0 0x10000>;
1344			compatible = "qcom,sc7280-nsp-noc";
1345			#interconnect-cells = <2>;
1346			qcom,bcm-voters = <&apps_bcm_voter>;
1347		};
1348
1349		usb_1: usb@a6f8800 {
1350			compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
1351			reg = <0 0x0a6f8800 0 0x400>;
1352			status = "disabled";
1353			#address-cells = <2>;
1354			#size-cells = <2>;
1355			ranges;
1356			dma-ranges;
1357
1358			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
1359				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
1360				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
1361				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
1362				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>;
1363			clock-names = "cfg_noc", "core", "iface", "mock_utmi",
1364				      "sleep";
1365
1366			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
1367					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
1368			assigned-clock-rates = <19200000>, <200000000>;
1369
1370			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
1371					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
1372					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
1373					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
1374			interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
1375					  "dm_hs_phy_irq", "ss_phy_irq";
1376
1377			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
1378
1379			resets = <&gcc GCC_USB30_PRIM_BCR>;
1380
1381			interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
1382					<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_USB3_0 0>;
1383			interconnect-names = "usb-ddr", "apps-usb";
1384
1385			usb_1_dwc3: usb@a600000 {
1386				compatible = "snps,dwc3";
1387				reg = <0 0x0a600000 0 0xe000>;
1388				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
1389				iommus = <&apps_smmu 0xe0 0x0>;
1390				snps,dis_u2_susphy_quirk;
1391				snps,dis_enblslpm_quirk;
1392				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
1393				phy-names = "usb2-phy", "usb3-phy";
1394				maximum-speed = "super-speed";
1395			};
1396		};
1397
1398		videocc: clock-controller@aaf0000 {
1399			compatible = "qcom,sc7280-videocc";
1400			reg = <0 0xaaf0000 0 0x10000>;
1401			clocks = <&rpmhcc RPMH_CXO_CLK>,
1402				<&rpmhcc RPMH_CXO_CLK_A>;
1403			clock-names = "bi_tcxo", "bi_tcxo_ao";
1404			#clock-cells = <1>;
1405			#reset-cells = <1>;
1406			#power-domain-cells = <1>;
1407		};
1408
1409		dispcc: clock-controller@af00000 {
1410			compatible = "qcom,sc7280-dispcc";
1411			reg = <0 0xaf00000 0 0x20000>;
1412			clocks = <&rpmhcc RPMH_CXO_CLK>,
1413				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
1414				 <0>, <0>, <0>, <0>, <0>, <0>;
1415			clock-names = "bi_tcxo", "gcc_disp_gpll0_clk",
1416				      "dsi0_phy_pll_out_byteclk",
1417				      "dsi0_phy_pll_out_dsiclk",
1418				      "dp_phy_pll_link_clk",
1419				      "dp_phy_pll_vco_div_clk",
1420				      "edp_phy_pll_link_clk",
1421				      "edp_phy_pll_vco_div_clk";
1422			#clock-cells = <1>;
1423			#reset-cells = <1>;
1424			#power-domain-cells = <1>;
1425		};
1426
1427		pdc: interrupt-controller@b220000 {
1428			compatible = "qcom,sc7280-pdc", "qcom,pdc";
1429			reg = <0 0x0b220000 0 0x30000>;
1430			qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>,
1431					  <55 306 4>, <59 312 3>, <62 374 2>,
1432					  <64 434 2>, <66 438 3>, <69 86 1>,
1433					  <70 520 54>, <124 609 31>, <155 63 1>,
1434					  <156 716 12>;
1435			#interrupt-cells = <2>;
1436			interrupt-parent = <&intc>;
1437			interrupt-controller;
1438		};
1439
1440		pdc_reset: reset-controller@b5e0000 {
1441			compatible = "qcom,sc7280-pdc-global";
1442			reg = <0 0x0b5e0000 0 0x20000>;
1443			#reset-cells = <1>;
1444		};
1445
1446		tsens0: thermal-sensor@c263000 {
1447			compatible = "qcom,sc7280-tsens","qcom,tsens-v2";
1448			reg = <0 0x0c263000 0 0x1ff>, /* TM */
1449				<0 0x0c222000 0 0x1ff>; /* SROT */
1450			#qcom,sensors = <15>;
1451			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
1452				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
1453			interrupt-names = "uplow","critical";
1454			#thermal-sensor-cells = <1>;
1455		};
1456
1457		tsens1: thermal-sensor@c265000 {
1458			compatible = "qcom,sc7280-tsens","qcom,tsens-v2";
1459			reg = <0 0x0c265000 0 0x1ff>, /* TM */
1460				<0 0x0c223000 0 0x1ff>; /* SROT */
1461			#qcom,sensors = <12>;
1462			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
1463				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
1464			interrupt-names = "uplow","critical";
1465			#thermal-sensor-cells = <1>;
1466		};
1467
1468		aoss_reset: reset-controller@c2a0000 {
1469			compatible = "qcom,sc7280-aoss-cc", "qcom,sdm845-aoss-cc";
1470			reg = <0 0x0c2a0000 0 0x31000>;
1471			#reset-cells = <1>;
1472		};
1473
1474		aoss_qmp: power-controller@c300000 {
1475			compatible = "qcom,sc7280-aoss-qmp";
1476			reg = <0 0x0c300000 0 0x100000>;
1477			interrupts-extended = <&ipcc IPCC_CLIENT_AOP
1478						     IPCC_MPROC_SIGNAL_GLINK_QMP
1479						     IRQ_TYPE_EDGE_RISING>;
1480			mboxes = <&ipcc IPCC_CLIENT_AOP
1481					IPCC_MPROC_SIGNAL_GLINK_QMP>;
1482
1483			#clock-cells = <0>;
1484			#power-domain-cells = <1>;
1485		};
1486
1487		spmi_bus: spmi@c440000 {
1488			compatible = "qcom,spmi-pmic-arb";
1489			reg = <0 0x0c440000 0 0x1100>,
1490			      <0 0x0c600000 0 0x2000000>,
1491			      <0 0x0e600000 0 0x100000>,
1492			      <0 0x0e700000 0 0xa0000>,
1493			      <0 0x0c40a000 0 0x26000>;
1494			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
1495			interrupt-names = "periph_irq";
1496			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
1497			qcom,ee = <0>;
1498			qcom,channel = <0>;
1499			#address-cells = <1>;
1500			#size-cells = <1>;
1501			interrupt-controller;
1502			#interrupt-cells = <4>;
1503		};
1504
1505		tlmm: pinctrl@f100000 {
1506			compatible = "qcom,sc7280-pinctrl";
1507			reg = <0 0x0f100000 0 0x300000>;
1508			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
1509			gpio-controller;
1510			#gpio-cells = <2>;
1511			interrupt-controller;
1512			#interrupt-cells = <2>;
1513			gpio-ranges = <&tlmm 0 0 175>;
1514			wakeup-parent = <&pdc>;
1515
1516			qup_uart5_default: qup-uart5-default {
1517				pins = "gpio46", "gpio47";
1518				function = "qup13";
1519			};
1520
1521			sdc1_on: sdc1-on {
1522				clk {
1523					pins = "sdc1_clk";
1524				};
1525
1526				cmd {
1527					pins = "sdc1_cmd";
1528				};
1529
1530				data {
1531					pins = "sdc1_data";
1532				};
1533
1534				rclk {
1535					pins = "sdc1_rclk";
1536				};
1537			};
1538
1539			sdc1_off: sdc1-off {
1540				clk {
1541					pins = "sdc1_clk";
1542					drive-strength = <2>;
1543					bias-bus-hold;
1544				};
1545
1546				cmd {
1547					pins = "sdc1_cmd";
1548					drive-strength = <2>;
1549					bias-bus-hold;
1550				};
1551
1552				data {
1553					pins = "sdc1_data";
1554					drive-strength = <2>;
1555					bias-bus-hold;
1556				};
1557
1558				rclk {
1559					pins = "sdc1_rclk";
1560					bias-bus-hold;
1561				};
1562			};
1563
1564			sdc2_on: sdc2-on {
1565				clk {
1566					pins = "sdc2_clk";
1567				};
1568
1569				cmd {
1570					pins = "sdc2_cmd";
1571				};
1572
1573				data {
1574					pins = "sdc2_data";
1575				};
1576
1577				sd-cd {
1578					pins = "gpio91";
1579				};
1580			};
1581
1582			sdc2_off: sdc2-off {
1583				clk {
1584					pins = "sdc2_clk";
1585					drive-strength = <2>;
1586					bias-bus-hold;
1587				};
1588
1589				cmd {
1590					pins ="sdc2_cmd";
1591					drive-strength = <2>;
1592					bias-bus-hold;
1593				};
1594
1595				data {
1596					pins ="sdc2_data";
1597					drive-strength = <2>;
1598					bias-bus-hold;
1599				};
1600			};
1601		};
1602
1603		apps_smmu: iommu@15000000 {
1604			compatible = "qcom,sc7280-smmu-500", "arm,mmu-500";
1605			reg = <0 0x15000000 0 0x100000>;
1606			#iommu-cells = <2>;
1607			#global-interrupts = <1>;
1608			dma-coherent;
1609			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
1610				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
1611				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
1612				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
1613				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
1614				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
1615				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
1616				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
1617				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
1618				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
1619				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
1620				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
1621				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
1622				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
1623				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
1624				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
1625				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
1626				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
1627				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
1628				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
1629				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
1630				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
1631				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
1632				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
1633				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
1634				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
1635				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
1636				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
1637				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
1638				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
1639				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
1640				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
1641				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
1642				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
1643				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
1644				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
1645				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
1646				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
1647				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
1648				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
1649				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
1650				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
1651				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
1652				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
1653				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
1654				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
1655				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
1656				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
1657				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
1658				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
1659				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
1660				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
1661				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
1662				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
1663				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
1664				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
1665				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
1666				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
1667				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
1668				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
1669				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
1670				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
1671				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
1672				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
1673				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
1674				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
1675				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
1676				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
1677				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
1678				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
1679				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
1680				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
1681				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
1682				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
1683				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
1684				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
1685				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
1686				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
1687				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
1688				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
1689				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
1690		};
1691
1692		intc: interrupt-controller@17a00000 {
1693			compatible = "arm,gic-v3";
1694			#address-cells = <2>;
1695			#size-cells = <2>;
1696			ranges;
1697			#interrupt-cells = <3>;
1698			interrupt-controller;
1699			reg = <0 0x17a00000 0 0x10000>,     /* GICD */
1700			      <0 0x17a60000 0 0x100000>;    /* GICR * 8 */
1701			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
1702
1703			gic-its@17a40000 {
1704				compatible = "arm,gic-v3-its";
1705				msi-controller;
1706				#msi-cells = <1>;
1707				reg = <0 0x17a40000 0 0x20000>;
1708				status = "disabled";
1709			};
1710		};
1711
1712		watchdog@17c10000 {
1713			compatible = "qcom,apss-wdt-sc7280", "qcom,kpss-wdt";
1714			reg = <0 0x17c10000 0 0x1000>;
1715			clocks = <&sleep_clk>;
1716			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
1717		};
1718
1719		timer@17c20000 {
1720			#address-cells = <2>;
1721			#size-cells = <2>;
1722			ranges;
1723			compatible = "arm,armv7-timer-mem";
1724			reg = <0 0x17c20000 0 0x1000>;
1725
1726			frame@17c21000 {
1727				frame-number = <0>;
1728				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
1729					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
1730				reg = <0 0x17c21000 0 0x1000>,
1731				      <0 0x17c22000 0 0x1000>;
1732			};
1733
1734			frame@17c23000 {
1735				frame-number = <1>;
1736				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
1737				reg = <0 0x17c23000 0 0x1000>;
1738				status = "disabled";
1739			};
1740
1741			frame@17c25000 {
1742				frame-number = <2>;
1743				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
1744				reg = <0 0x17c25000 0 0x1000>;
1745				status = "disabled";
1746			};
1747
1748			frame@17c27000 {
1749				frame-number = <3>;
1750				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
1751				reg = <0 0x17c27000 0 0x1000>;
1752				status = "disabled";
1753			};
1754
1755			frame@17c29000 {
1756				frame-number = <4>;
1757				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
1758				reg = <0 0x17c29000 0 0x1000>;
1759				status = "disabled";
1760			};
1761
1762			frame@17c2b000 {
1763				frame-number = <5>;
1764				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
1765				reg = <0 0x17c2b000 0 0x1000>;
1766				status = "disabled";
1767			};
1768
1769			frame@17c2d000 {
1770				frame-number = <6>;
1771				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
1772				reg = <0 0x17c2d000 0 0x1000>;
1773				status = "disabled";
1774			};
1775		};
1776
1777		apps_rsc: rsc@18200000 {
1778			compatible = "qcom,rpmh-rsc";
1779			reg = <0 0x18200000 0 0x10000>,
1780			      <0 0x18210000 0 0x10000>,
1781			      <0 0x18220000 0 0x10000>;
1782			reg-names = "drv-0", "drv-1", "drv-2";
1783			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
1784				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
1785				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
1786			qcom,tcs-offset = <0xd00>;
1787			qcom,drv-id = <2>;
1788			qcom,tcs-config = <ACTIVE_TCS  2>,
1789					  <SLEEP_TCS   3>,
1790					  <WAKE_TCS    3>,
1791					  <CONTROL_TCS 1>;
1792
1793			apps_bcm_voter: bcm-voter {
1794				compatible = "qcom,bcm-voter";
1795			};
1796
1797			rpmhpd: power-controller {
1798				compatible = "qcom,sc7280-rpmhpd";
1799				#power-domain-cells = <1>;
1800				operating-points-v2 = <&rpmhpd_opp_table>;
1801
1802				rpmhpd_opp_table: opp-table {
1803					compatible = "operating-points-v2";
1804
1805					rpmhpd_opp_ret: opp1 {
1806						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
1807					};
1808
1809					rpmhpd_opp_low_svs: opp2 {
1810						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
1811					};
1812
1813					rpmhpd_opp_svs: opp3 {
1814						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
1815					};
1816
1817					rpmhpd_opp_svs_l1: opp4 {
1818						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
1819					};
1820
1821					rpmhpd_opp_svs_l2: opp5 {
1822						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
1823					};
1824
1825					rpmhpd_opp_nom: opp6 {
1826						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
1827					};
1828
1829					rpmhpd_opp_nom_l1: opp7 {
1830						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
1831					};
1832
1833					rpmhpd_opp_turbo: opp8 {
1834						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
1835					};
1836
1837					rpmhpd_opp_turbo_l1: opp9 {
1838						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
1839					};
1840				};
1841			};
1842
1843			rpmhcc: clock-controller {
1844				compatible = "qcom,sc7280-rpmh-clk";
1845				clocks = <&xo_board>;
1846				clock-names = "xo";
1847				#clock-cells = <1>;
1848			};
1849		};
1850
1851		cpufreq_hw: cpufreq@18591000 {
1852			compatible = "qcom,cpufreq-epss";
1853			reg = <0 0x18591100 0 0x900>,
1854			      <0 0x18592100 0 0x900>,
1855			      <0 0x18593100 0 0x900>;
1856			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
1857			clock-names = "xo", "alternate";
1858			#freq-domain-cells = <1>;
1859		};
1860	};
1861
1862	thermal_zones: thermal-zones {
1863		cpu0-thermal {
1864			polling-delay-passive = <250>;
1865			polling-delay = <0>;
1866
1867			thermal-sensors = <&tsens0 1>;
1868
1869			trips {
1870				cpu0_alert0: trip-point0 {
1871					temperature = <90000>;
1872					hysteresis = <2000>;
1873					type = "passive";
1874				};
1875
1876				cpu0_alert1: trip-point1 {
1877					temperature = <95000>;
1878					hysteresis = <2000>;
1879					type = "passive";
1880				};
1881
1882				cpu0_crit: cpu-crit {
1883					temperature = <110000>;
1884					hysteresis = <0>;
1885					type = "critical";
1886				};
1887			};
1888
1889			cooling-maps {
1890				map0 {
1891					trip = <&cpu0_alert0>;
1892					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
1893							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
1894							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
1895							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
1896				};
1897				map1 {
1898					trip = <&cpu0_alert1>;
1899					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
1900							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
1901							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
1902							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
1903				};
1904			};
1905		};
1906
1907		cpu1-thermal {
1908			polling-delay-passive = <250>;
1909			polling-delay = <0>;
1910
1911			thermal-sensors = <&tsens0 2>;
1912
1913			trips {
1914				cpu1_alert0: trip-point0 {
1915					temperature = <90000>;
1916					hysteresis = <2000>;
1917					type = "passive";
1918				};
1919
1920				cpu1_alert1: trip-point1 {
1921					temperature = <95000>;
1922					hysteresis = <2000>;
1923					type = "passive";
1924				};
1925
1926				cpu1_crit: cpu-crit {
1927					temperature = <110000>;
1928					hysteresis = <0>;
1929					type = "critical";
1930				};
1931			};
1932
1933			cooling-maps {
1934				map0 {
1935					trip = <&cpu1_alert0>;
1936					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
1937							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
1938							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
1939							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
1940				};
1941				map1 {
1942					trip = <&cpu1_alert1>;
1943					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
1944							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
1945							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
1946							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
1947				};
1948			};
1949		};
1950
1951		cpu2-thermal {
1952			polling-delay-passive = <250>;
1953			polling-delay = <0>;
1954
1955			thermal-sensors = <&tsens0 3>;
1956
1957			trips {
1958				cpu2_alert0: trip-point0 {
1959					temperature = <90000>;
1960					hysteresis = <2000>;
1961					type = "passive";
1962				};
1963
1964				cpu2_alert1: trip-point1 {
1965					temperature = <95000>;
1966					hysteresis = <2000>;
1967					type = "passive";
1968				};
1969
1970				cpu2_crit: cpu-crit {
1971					temperature = <110000>;
1972					hysteresis = <0>;
1973					type = "critical";
1974				};
1975			};
1976
1977			cooling-maps {
1978				map0 {
1979					trip = <&cpu2_alert0>;
1980					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
1981							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
1982							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
1983							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
1984				};
1985				map1 {
1986					trip = <&cpu2_alert1>;
1987					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
1988							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
1989							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
1990							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
1991				};
1992			};
1993		};
1994
1995		cpu3-thermal {
1996			polling-delay-passive = <250>;
1997			polling-delay = <0>;
1998
1999			thermal-sensors = <&tsens0 4>;
2000
2001			trips {
2002				cpu3_alert0: trip-point0 {
2003					temperature = <90000>;
2004					hysteresis = <2000>;
2005					type = "passive";
2006				};
2007
2008				cpu3_alert1: trip-point1 {
2009					temperature = <95000>;
2010					hysteresis = <2000>;
2011					type = "passive";
2012				};
2013
2014				cpu3_crit: cpu-crit {
2015					temperature = <110000>;
2016					hysteresis = <0>;
2017					type = "critical";
2018				};
2019			};
2020
2021			cooling-maps {
2022				map0 {
2023					trip = <&cpu3_alert0>;
2024					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2025							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2026							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2027							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2028				};
2029				map1 {
2030					trip = <&cpu3_alert1>;
2031					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2032							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2033							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2034							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2035				};
2036			};
2037		};
2038
2039		cpu4-thermal {
2040			polling-delay-passive = <250>;
2041			polling-delay = <0>;
2042
2043			thermal-sensors = <&tsens0 7>;
2044
2045			trips {
2046				cpu4_alert0: trip-point0 {
2047					temperature = <90000>;
2048					hysteresis = <2000>;
2049					type = "passive";
2050				};
2051
2052				cpu4_alert1: trip-point1 {
2053					temperature = <95000>;
2054					hysteresis = <2000>;
2055					type = "passive";
2056				};
2057
2058				cpu4_crit: cpu-crit {
2059					temperature = <110000>;
2060					hysteresis = <0>;
2061					type = "critical";
2062				};
2063			};
2064
2065			cooling-maps {
2066				map0 {
2067					trip = <&cpu4_alert0>;
2068					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2069							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2070							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2071							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2072				};
2073				map1 {
2074					trip = <&cpu4_alert1>;
2075					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2076							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2077							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2078							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2079				};
2080			};
2081		};
2082
2083		cpu5-thermal {
2084			polling-delay-passive = <250>;
2085			polling-delay = <0>;
2086
2087			thermal-sensors = <&tsens0 8>;
2088
2089			trips {
2090				cpu5_alert0: trip-point0 {
2091					temperature = <90000>;
2092					hysteresis = <2000>;
2093					type = "passive";
2094				};
2095
2096				cpu5_alert1: trip-point1 {
2097					temperature = <95000>;
2098					hysteresis = <2000>;
2099					type = "passive";
2100				};
2101
2102				cpu5_crit: cpu-crit {
2103					temperature = <110000>;
2104					hysteresis = <0>;
2105					type = "critical";
2106				};
2107			};
2108
2109			cooling-maps {
2110				map0 {
2111					trip = <&cpu5_alert0>;
2112					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2113							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2114							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2115							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2116				};
2117				map1 {
2118					trip = <&cpu5_alert1>;
2119					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2120							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2121							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2122							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2123				};
2124			};
2125		};
2126
2127		cpu6-thermal {
2128			polling-delay-passive = <250>;
2129			polling-delay = <0>;
2130
2131			thermal-sensors = <&tsens0 9>;
2132
2133			trips {
2134				cpu6_alert0: trip-point0 {
2135					temperature = <90000>;
2136					hysteresis = <2000>;
2137					type = "passive";
2138				};
2139
2140				cpu6_alert1: trip-point1 {
2141					temperature = <95000>;
2142					hysteresis = <2000>;
2143					type = "passive";
2144				};
2145
2146				cpu6_crit: cpu-crit {
2147					temperature = <110000>;
2148					hysteresis = <0>;
2149					type = "critical";
2150				};
2151			};
2152
2153			cooling-maps {
2154				map0 {
2155					trip = <&cpu6_alert0>;
2156					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2157							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2158							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2159							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2160				};
2161				map1 {
2162					trip = <&cpu6_alert1>;
2163					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2164							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2165							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2166							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2167				};
2168			};
2169		};
2170
2171		cpu7-thermal {
2172			polling-delay-passive = <250>;
2173			polling-delay = <0>;
2174
2175			thermal-sensors = <&tsens0 10>;
2176
2177			trips {
2178				cpu7_alert0: trip-point0 {
2179					temperature = <90000>;
2180					hysteresis = <2000>;
2181					type = "passive";
2182				};
2183
2184				cpu7_alert1: trip-point1 {
2185					temperature = <95000>;
2186					hysteresis = <2000>;
2187					type = "passive";
2188				};
2189
2190				cpu7_crit: cpu-crit {
2191					temperature = <110000>;
2192					hysteresis = <0>;
2193					type = "critical";
2194				};
2195			};
2196
2197			cooling-maps {
2198				map0 {
2199					trip = <&cpu7_alert0>;
2200					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2201							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2202							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2203							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2204				};
2205				map1 {
2206					trip = <&cpu7_alert1>;
2207					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2208							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2209							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2210							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2211				};
2212			};
2213		};
2214
2215		cpu8-thermal {
2216			polling-delay-passive = <250>;
2217			polling-delay = <0>;
2218
2219			thermal-sensors = <&tsens0 11>;
2220
2221			trips {
2222				cpu8_alert0: trip-point0 {
2223					temperature = <90000>;
2224					hysteresis = <2000>;
2225					type = "passive";
2226				};
2227
2228				cpu8_alert1: trip-point1 {
2229					temperature = <95000>;
2230					hysteresis = <2000>;
2231					type = "passive";
2232				};
2233
2234				cpu8_crit: cpu-crit {
2235					temperature = <110000>;
2236					hysteresis = <0>;
2237					type = "critical";
2238				};
2239			};
2240
2241			cooling-maps {
2242				map0 {
2243					trip = <&cpu8_alert0>;
2244					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2245							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2246							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2247							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2248				};
2249				map1 {
2250					trip = <&cpu8_alert1>;
2251					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2252							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2253							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2254							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2255				};
2256			};
2257		};
2258
2259		cpu9-thermal {
2260			polling-delay-passive = <250>;
2261			polling-delay = <0>;
2262
2263			thermal-sensors = <&tsens0 12>;
2264
2265			trips {
2266				cpu9_alert0: trip-point0 {
2267					temperature = <90000>;
2268					hysteresis = <2000>;
2269					type = "passive";
2270				};
2271
2272				cpu9_alert1: trip-point1 {
2273					temperature = <95000>;
2274					hysteresis = <2000>;
2275					type = "passive";
2276				};
2277
2278				cpu9_crit: cpu-crit {
2279					temperature = <110000>;
2280					hysteresis = <0>;
2281					type = "critical";
2282				};
2283			};
2284
2285			cooling-maps {
2286				map0 {
2287					trip = <&cpu9_alert0>;
2288					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2289							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2290							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2291							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2292				};
2293				map1 {
2294					trip = <&cpu9_alert1>;
2295					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2296							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2297							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2298							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2299				};
2300			};
2301		};
2302
2303		cpu10-thermal {
2304			polling-delay-passive = <250>;
2305			polling-delay = <0>;
2306
2307			thermal-sensors = <&tsens0 13>;
2308
2309			trips {
2310				cpu10_alert0: trip-point0 {
2311					temperature = <90000>;
2312					hysteresis = <2000>;
2313					type = "passive";
2314				};
2315
2316				cpu10_alert1: trip-point1 {
2317					temperature = <95000>;
2318					hysteresis = <2000>;
2319					type = "passive";
2320				};
2321
2322				cpu10_crit: cpu-crit {
2323					temperature = <110000>;
2324					hysteresis = <0>;
2325					type = "critical";
2326				};
2327			};
2328
2329			cooling-maps {
2330				map0 {
2331					trip = <&cpu10_alert0>;
2332					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2333							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2334							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2335							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2336				};
2337				map1 {
2338					trip = <&cpu10_alert1>;
2339					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2340							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2341							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2342							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2343				};
2344			};
2345		};
2346
2347		cpu11-thermal {
2348			polling-delay-passive = <250>;
2349			polling-delay = <0>;
2350
2351			thermal-sensors = <&tsens0 14>;
2352
2353			trips {
2354				cpu11_alert0: trip-point0 {
2355					temperature = <90000>;
2356					hysteresis = <2000>;
2357					type = "passive";
2358				};
2359
2360				cpu11_alert1: trip-point1 {
2361					temperature = <95000>;
2362					hysteresis = <2000>;
2363					type = "passive";
2364				};
2365
2366				cpu11_crit: cpu-crit {
2367					temperature = <110000>;
2368					hysteresis = <0>;
2369					type = "critical";
2370				};
2371			};
2372
2373			cooling-maps {
2374				map0 {
2375					trip = <&cpu11_alert0>;
2376					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2377							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2378							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2379							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2380				};
2381				map1 {
2382					trip = <&cpu11_alert1>;
2383					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2384							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2385							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
2386							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
2387				};
2388			};
2389		};
2390
2391		aoss0-thermal {
2392			polling-delay-passive = <0>;
2393			polling-delay = <0>;
2394
2395			thermal-sensors = <&tsens0 0>;
2396
2397			trips {
2398				aoss0_alert0: trip-point0 {
2399					temperature = <90000>;
2400					hysteresis = <2000>;
2401					type = "hot";
2402				};
2403
2404				aoss0_crit: aoss0-crit {
2405					temperature = <110000>;
2406					hysteresis = <0>;
2407					type = "critical";
2408				};
2409			};
2410		};
2411
2412		aoss1-thermal {
2413			polling-delay-passive = <0>;
2414			polling-delay = <0>;
2415
2416			thermal-sensors = <&tsens1 0>;
2417
2418			trips {
2419				aoss1_alert0: trip-point0 {
2420					temperature = <90000>;
2421					hysteresis = <2000>;
2422					type = "hot";
2423				};
2424
2425				aoss1_crit: aoss1-crit {
2426					temperature = <110000>;
2427					hysteresis = <0>;
2428					type = "critical";
2429				};
2430			};
2431		};
2432
2433		cpuss0-thermal {
2434			polling-delay-passive = <0>;
2435			polling-delay = <0>;
2436
2437			thermal-sensors = <&tsens0 5>;
2438
2439			trips {
2440				cpuss0_alert0: trip-point0 {
2441					temperature = <90000>;
2442					hysteresis = <2000>;
2443					type = "hot";
2444				};
2445				cpuss0_crit: cluster0-crit {
2446					temperature = <110000>;
2447					hysteresis = <0>;
2448					type = "critical";
2449				};
2450			};
2451		};
2452
2453		cpuss1-thermal {
2454			polling-delay-passive = <0>;
2455			polling-delay = <0>;
2456
2457			thermal-sensors = <&tsens0 6>;
2458
2459			trips {
2460				cpuss1_alert0: trip-point0 {
2461					temperature = <90000>;
2462					hysteresis = <2000>;
2463					type = "hot";
2464				};
2465				cpuss1_crit: cluster0-crit {
2466					temperature = <110000>;
2467					hysteresis = <0>;
2468					type = "critical";
2469				};
2470			};
2471		};
2472
2473		gpuss0-thermal {
2474			polling-delay-passive = <0>;
2475			polling-delay = <0>;
2476
2477			thermal-sensors = <&tsens1 1>;
2478
2479			trips {
2480				gpuss0_alert0: trip-point0 {
2481					temperature = <90000>;
2482					hysteresis = <2000>;
2483					type = "hot";
2484				};
2485
2486				gpuss0_crit: gpuss0-crit {
2487					temperature = <110000>;
2488					hysteresis = <0>;
2489					type = "critical";
2490				};
2491			};
2492		};
2493
2494		gpuss1-thermal {
2495			polling-delay-passive = <0>;
2496			polling-delay = <0>;
2497
2498			thermal-sensors = <&tsens1 2>;
2499
2500			trips {
2501				gpuss1_alert0: trip-point0 {
2502					temperature = <90000>;
2503					hysteresis = <2000>;
2504					type = "hot";
2505				};
2506
2507				gpuss1_crit: gpuss1-crit {
2508					temperature = <110000>;
2509					hysteresis = <0>;
2510					type = "critical";
2511				};
2512			};
2513		};
2514
2515		nspss0-thermal {
2516			polling-delay-passive = <0>;
2517			polling-delay = <0>;
2518
2519			thermal-sensors = <&tsens1 3>;
2520
2521			trips {
2522				nspss0_alert0: trip-point0 {
2523					temperature = <90000>;
2524					hysteresis = <2000>;
2525					type = "hot";
2526				};
2527
2528				nspss0_crit: nspss0-crit {
2529					temperature = <110000>;
2530					hysteresis = <0>;
2531					type = "critical";
2532				};
2533			};
2534		};
2535
2536		nspss1-thermal {
2537			polling-delay-passive = <0>;
2538			polling-delay = <0>;
2539
2540			thermal-sensors = <&tsens1 4>;
2541
2542			trips {
2543				nspss1_alert0: trip-point0 {
2544					temperature = <90000>;
2545					hysteresis = <2000>;
2546					type = "hot";
2547				};
2548
2549				nspss1_crit: nspss1-crit {
2550					temperature = <110000>;
2551					hysteresis = <0>;
2552					type = "critical";
2553				};
2554			};
2555		};
2556
2557		video-thermal {
2558			polling-delay-passive = <0>;
2559			polling-delay = <0>;
2560
2561			thermal-sensors = <&tsens1 5>;
2562
2563			trips {
2564				video_alert0: trip-point0 {
2565					temperature = <90000>;
2566					hysteresis = <2000>;
2567					type = "hot";
2568				};
2569
2570				video_crit: video-crit {
2571					temperature = <110000>;
2572					hysteresis = <0>;
2573					type = "critical";
2574				};
2575			};
2576		};
2577
2578		ddr-thermal {
2579			polling-delay-passive = <0>;
2580			polling-delay = <0>;
2581
2582			thermal-sensors = <&tsens1 6>;
2583
2584			trips {
2585				ddr_alert0: trip-point0 {
2586					temperature = <90000>;
2587					hysteresis = <2000>;
2588					type = "hot";
2589				};
2590
2591				ddr_crit: ddr-crit {
2592					temperature = <110000>;
2593					hysteresis = <0>;
2594					type = "critical";
2595				};
2596			};
2597		};
2598
2599		mdmss0-thermal {
2600			polling-delay-passive = <0>;
2601			polling-delay = <0>;
2602
2603			thermal-sensors = <&tsens1 7>;
2604
2605			trips {
2606				mdmss0_alert0: trip-point0 {
2607					temperature = <90000>;
2608					hysteresis = <2000>;
2609					type = "hot";
2610				};
2611
2612				mdmss0_crit: mdmss0-crit {
2613					temperature = <110000>;
2614					hysteresis = <0>;
2615					type = "critical";
2616				};
2617			};
2618		};
2619
2620		mdmss1-thermal {
2621			polling-delay-passive = <0>;
2622			polling-delay = <0>;
2623
2624			thermal-sensors = <&tsens1 8>;
2625
2626			trips {
2627				mdmss1_alert0: trip-point0 {
2628					temperature = <90000>;
2629					hysteresis = <2000>;
2630					type = "hot";
2631				};
2632
2633				mdmss1_crit: mdmss1-crit {
2634					temperature = <110000>;
2635					hysteresis = <0>;
2636					type = "critical";
2637				};
2638			};
2639		};
2640
2641		mdmss2-thermal {
2642			polling-delay-passive = <0>;
2643			polling-delay = <0>;
2644
2645			thermal-sensors = <&tsens1 9>;
2646
2647			trips {
2648				mdmss2_alert0: trip-point0 {
2649					temperature = <90000>;
2650					hysteresis = <2000>;
2651					type = "hot";
2652				};
2653
2654				mdmss2_crit: mdmss2-crit {
2655					temperature = <110000>;
2656					hysteresis = <0>;
2657					type = "critical";
2658				};
2659			};
2660		};
2661
2662		mdmss3-thermal {
2663			polling-delay-passive = <0>;
2664			polling-delay = <0>;
2665
2666			thermal-sensors = <&tsens1 10>;
2667
2668			trips {
2669				mdmss3_alert0: trip-point0 {
2670					temperature = <90000>;
2671					hysteresis = <2000>;
2672					type = "hot";
2673				};
2674
2675				mdmss3_crit: mdmss3-crit {
2676					temperature = <110000>;
2677					hysteresis = <0>;
2678					type = "critical";
2679				};
2680			};
2681		};
2682
2683		camera0-thermal {
2684			polling-delay-passive = <0>;
2685			polling-delay = <0>;
2686
2687			thermal-sensors = <&tsens1 11>;
2688
2689			trips {
2690				camera0_alert0: trip-point0 {
2691					temperature = <90000>;
2692					hysteresis = <2000>;
2693					type = "hot";
2694				};
2695
2696				camera0_crit: camera0-crit {
2697					temperature = <110000>;
2698					hysteresis = <0>;
2699					type = "critical";
2700				};
2701			};
2702		};
2703	};
2704
2705	timer {
2706		compatible = "arm,armv8-timer";
2707		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
2708			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
2709			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
2710			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
2711	};
2712};
2713