1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Google Pompom board device tree source 4 * 5 * Copyright 2020 Google LLC. 6 */ 7 8#include "sc7180.dtsi" 9 10ap_ec_spi: &spi6 {}; 11ap_h1_spi: &spi0 {}; 12 13#include "sc7180-trogdor.dtsi" 14 15/ { 16 thermal-zones { 17 5v-choke-thermal { 18 polling-delay-passive = <0>; 19 polling-delay = <250>; 20 21 thermal-sensors = <&pm6150_adc_tm 1>; 22 23 trips { 24 5v-choke-crit { 25 temperature = <125000>; 26 hysteresis = <1000>; 27 type = "critical"; 28 }; 29 }; 30 }; 31 }; 32}; 33 34&alc5682 { 35 realtek,dmic-clk-driving-high = "true"; 36}; 37 38&cpu6_alert0 { 39 temperature = <60000>; 40}; 41 42&cpu6_alert1 { 43 temperature = <65000>; 44}; 45 46&cpu6_thermal { 47 sustainable-power = <948>; 48}; 49 50&cpu7_alert0 { 51 temperature = <60000>; 52}; 53 54&cpu7_alert1 { 55 temperature = <65000>; 56}; 57 58&cpu7_thermal { 59 sustainable-power = <948>; 60}; 61 62&cpu8_alert0 { 63 temperature = <60000>; 64}; 65 66&cpu8_alert1 { 67 temperature = <65000>; 68}; 69 70&cpu8_thermal { 71 sustainable-power = <948>; 72}; 73 74&cpu9_alert0 { 75 temperature = <60000>; 76}; 77 78&cpu9_alert1 { 79 temperature = <65000>; 80}; 81 82&cpu9_thermal { 83 sustainable-power = <948>; 84}; 85 86&gpio_keys { 87 status = "okay"; 88}; 89 90ap_ts_pen_1v8: &i2c4 { 91 status = "okay"; 92 clock-frequency = <400000>; 93 94 ap_ts: touchscreen@10 { 95 compatible = "hid-over-i2c"; 96 reg = <0x10>; 97 pinctrl-names = "default"; 98 pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; 99 100 interrupt-parent = <&tlmm>; 101 interrupts = <9 IRQ_TYPE_LEVEL_LOW>; 102 103 post-power-on-delay-ms = <20>; 104 hid-descr-addr = <0x0001>; 105 106 vdd-supply = <&pp3300_ts>; 107 }; 108}; 109 110&keyboard_controller { 111 function-row-physmap = < 112 MATRIX_KEY(0x00, 0x02, 0) /* T1 */ 113 MATRIX_KEY(0x03, 0x02, 0) /* T2 */ 114 MATRIX_KEY(0x02, 0x02, 0) /* T3 */ 115 MATRIX_KEY(0x01, 0x02, 0) /* T4 */ 116 MATRIX_KEY(0x03, 0x04, 0) /* T5 */ 117 MATRIX_KEY(0x02, 0x04, 0) /* T6 */ 118 MATRIX_KEY(0x01, 0x04, 0) /* T7 */ 119 MATRIX_KEY(0x02, 0x09, 0) /* T8 */ 120 MATRIX_KEY(0x01, 0x09, 0) /* T9 */ 121 MATRIX_KEY(0x00, 0x04, 0) /* T10 */ 122 >; 123 linux,keymap = < 124 MATRIX_KEY(0x00, 0x02, KEY_BACK) 125 MATRIX_KEY(0x03, 0x02, KEY_REFRESH) 126 MATRIX_KEY(0x02, 0x02, KEY_ZOOM) 127 MATRIX_KEY(0x01, 0x02, KEY_SCALE) 128 MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) 129 MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) 130 MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) 131 MATRIX_KEY(0x02, 0x09, KEY_MUTE) 132 MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) 133 MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) 134 135 CROS_STD_MAIN_KEYMAP 136 >; 137}; 138 139&panel { 140 compatible = "kingdisplay,kd116n21-30nv-a010"; 141}; 142 143&pen_insert { 144 /* Insert = high, eject = low */ 145 gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>; 146}; 147 148&pm6150_adc { 149 5v-choke-thermistor@4e { 150 reg = <ADC5_AMUX_THM2_100K_PU>; 151 qcom,ratiometric; 152 qcom,hw-settle-time = <200>; 153 }; 154}; 155 156&pm6150_adc_tm { 157 status = "okay"; 158 159 5v-choke-thermistor@1 { 160 reg = <1>; 161 io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>; 162 qcom,ratiometric; 163 qcom,hw-settle-time-us = <200>; 164 }; 165}; 166 167&sdhc_2 { 168 status = "okay"; 169}; 170 171&sound { 172 model = "sc7180-rt5682-max98357a-2mic"; 173 pinctrl-names = "default"; 174 pinctrl-0 = <&dmic_sel>; 175 dmic-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>; 176}; 177 178&usb_c1 { 179 status = "disabled"; 180}; 181 182&wifi { 183 qcom,ath10k-calibration-variant = "GO_POMPOM"; 184}; 185 186/* PINCTRL - board-specific pinctrl */ 187 188&tlmm { 189 gpio-line-names = "TP_INT_ODL", 190 "AP_RAM_ID0", 191 "AP_SKU_ID2", 192 "AP_RAM_ID1", 193 "", 194 "AP_RAM_ID2", 195 "AP_TP_I2C_SDA", 196 "AP_TP_I2C_SCL", 197 "TS_RESET_L", 198 "TS_INT_L", 199 "", 200 "EDP_BRIJ_IRQ", 201 "AP_EDP_BKLTEN", 202 "", 203 "", 204 "EDP_BRIJ_I2C_SDA", 205 "EDP_BRIJ_I2C_SCL", 206 "HUB_RST_L", 207 "", 208 "", 209 "", 210 "", 211 "", 212 "AMP_EN", 213 "P_SENSOR_INT_L", 214 "AP_SAR_SENSOR_SDA", 215 "AP_SAR_SENSOR_SCL", 216 "", 217 "HP_IRQ", 218 "", 219 "EN_PP3300_DX_EDP", 220 "AP_BRD_ID2", 221 "BRIJ_SUSPEND", 222 "AP_BRD_ID0", 223 "AP_H1_SPI_MISO", 224 "AP_H1_SPI_MOSI", 225 "AP_H1_SPI_CLK", 226 "AP_H1_SPI_CS_L", 227 "", 228 "", 229 "", 230 "", 231 "H1_AP_INT_ODL", 232 "", 233 "UART_AP_TX_DBG_RX", 234 "UART_DBG_TX_AP_RX", 235 "HP_I2C_SDA", 236 "HP_I2C_SCL", 237 "FORCED_USB_BOOT", 238 "AMP_BCLK", 239 "AMP_LRCLK", 240 "AMP_DIN", 241 "PEN_PDCT_L", 242 "HP_BCLK", 243 "HP_LRCLK", 244 "HP_DOUT", 245 "HP_DIN", 246 "HP_MCLK", 247 "AP_SKU_ID0", 248 "AP_EC_SPI_MISO", 249 "AP_EC_SPI_MOSI", 250 "AP_EC_SPI_CLK", 251 "AP_EC_SPI_CS_L", 252 "AP_SPI_CLK", 253 "AP_SPI_MOSI", 254 "AP_SPI_MISO", 255 /* 256 * AP_FLASH_WP_L is crossystem ABI. Schematics 257 * call it BIOS_FLASH_WP_L. 258 */ 259 "AP_FLASH_WP_L", 260 "", 261 "AP_SPI_CS0_L", 262 "SD_CD_ODL", 263 "", 264 "", 265 "", 266 "", 267 "", 268 "UIM2_DATA", 269 "UIM2_CLK", 270 "UIM2_RST", 271 "UIM2_PRESENT", 272 "UIM1_DATA", 273 "UIM1_CLK", 274 "UIM1_RST", 275 "", 276 "EN_PP3300_CODEC", 277 "EN_PP3300_HUB", 278 "", 279 "DMIC_SEL", 280 "", 281 "", 282 "", 283 "AP_SKU_ID1", 284 "AP_RST_REQ", 285 "", 286 "AP_BRD_ID1", 287 "AP_EC_INT_R_L", 288 "", 289 "", 290 "", 291 "", 292 "", 293 "", 294 "", 295 "", 296 "", 297 "EDP_BRIJ_EN", 298 "", 299 "", 300 "", 301 "", 302 "", 303 "", 304 "", 305 "", 306 "", 307 "", 308 "AP_TS_PEN_I2C_SDA", 309 "AP_TS_PEN_I2C_SCL", 310 "DP_HOT_PLUG_DET", 311 "EC_IN_RW_ODL"; 312 313 dmic_sel: dmic-sel { 314 pinmux { 315 pins = "gpio86"; 316 function = "gpio"; 317 }; 318 319 pinconf { 320 pins = "gpio86"; 321 bias-pull-down; 322 }; 323 }; 324}; 325