1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) 2/* 3 * IPQ9574 SoC device tree source 4 * 5 * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. 6 * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. 7 */ 8 9#include <dt-bindings/clock/qcom,apss-ipq.h> 10#include <dt-bindings/clock/qcom,ipq9574-gcc.h> 11#include <dt-bindings/interrupt-controller/arm-gic.h> 12#include <dt-bindings/reset/qcom,ipq9574-gcc.h> 13#include <dt-bindings/thermal/thermal.h> 14 15/ { 16 interrupt-parent = <&intc>; 17 #address-cells = <2>; 18 #size-cells = <2>; 19 20 clocks { 21 sleep_clk: sleep-clk { 22 compatible = "fixed-clock"; 23 #clock-cells = <0>; 24 }; 25 26 xo_board_clk: xo-board-clk { 27 compatible = "fixed-clock"; 28 #clock-cells = <0>; 29 }; 30 }; 31 32 cpus { 33 #address-cells = <1>; 34 #size-cells = <0>; 35 36 CPU0: cpu@0 { 37 device_type = "cpu"; 38 compatible = "arm,cortex-a73"; 39 reg = <0x0>; 40 enable-method = "psci"; 41 next-level-cache = <&L2_0>; 42 clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; 43 clock-names = "cpu"; 44 operating-points-v2 = <&cpu_opp_table>; 45 cpu-supply = <&ipq9574_s1>; 46 #cooling-cells = <2>; 47 }; 48 49 CPU1: cpu@1 { 50 device_type = "cpu"; 51 compatible = "arm,cortex-a73"; 52 reg = <0x1>; 53 enable-method = "psci"; 54 next-level-cache = <&L2_0>; 55 clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; 56 clock-names = "cpu"; 57 operating-points-v2 = <&cpu_opp_table>; 58 cpu-supply = <&ipq9574_s1>; 59 #cooling-cells = <2>; 60 }; 61 62 CPU2: cpu@2 { 63 device_type = "cpu"; 64 compatible = "arm,cortex-a73"; 65 reg = <0x2>; 66 enable-method = "psci"; 67 next-level-cache = <&L2_0>; 68 clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; 69 clock-names = "cpu"; 70 operating-points-v2 = <&cpu_opp_table>; 71 cpu-supply = <&ipq9574_s1>; 72 #cooling-cells = <2>; 73 }; 74 75 CPU3: cpu@3 { 76 device_type = "cpu"; 77 compatible = "arm,cortex-a73"; 78 reg = <0x3>; 79 enable-method = "psci"; 80 next-level-cache = <&L2_0>; 81 clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; 82 clock-names = "cpu"; 83 operating-points-v2 = <&cpu_opp_table>; 84 cpu-supply = <&ipq9574_s1>; 85 #cooling-cells = <2>; 86 }; 87 88 L2_0: l2-cache { 89 compatible = "cache"; 90 cache-level = <2>; 91 cache-unified; 92 }; 93 }; 94 95 firmware { 96 scm { 97 compatible = "qcom,scm-ipq9574", "qcom,scm"; 98 qcom,dload-mode = <&tcsr 0x6100>; 99 }; 100 }; 101 102 memory@40000000 { 103 device_type = "memory"; 104 /* We expect the bootloader to fill in the size */ 105 reg = <0x0 0x40000000 0x0 0x0>; 106 }; 107 108 cpu_opp_table: opp-table-cpu { 109 compatible = "operating-points-v2"; 110 opp-shared; 111 112 opp-936000000 { 113 opp-hz = /bits/ 64 <936000000>; 114 opp-microvolt = <725000>; 115 clock-latency-ns = <200000>; 116 }; 117 118 opp-1104000000 { 119 opp-hz = /bits/ 64 <1104000000>; 120 opp-microvolt = <787500>; 121 clock-latency-ns = <200000>; 122 }; 123 124 opp-1416000000 { 125 opp-hz = /bits/ 64 <1416000000>; 126 opp-microvolt = <862500>; 127 clock-latency-ns = <200000>; 128 }; 129 130 opp-1488000000 { 131 opp-hz = /bits/ 64 <1488000000>; 132 opp-microvolt = <925000>; 133 clock-latency-ns = <200000>; 134 }; 135 136 opp-1800000000 { 137 opp-hz = /bits/ 64 <1800000000>; 138 opp-microvolt = <987500>; 139 clock-latency-ns = <200000>; 140 }; 141 142 opp-2208000000 { 143 opp-hz = /bits/ 64 <2208000000>; 144 opp-microvolt = <1062500>; 145 clock-latency-ns = <200000>; 146 }; 147 }; 148 149 pmu { 150 compatible = "arm,cortex-a73-pmu"; 151 interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; 152 }; 153 154 psci { 155 compatible = "arm,psci-1.0"; 156 method = "smc"; 157 }; 158 159 rpm: remoteproc { 160 compatible = "qcom,ipq9574-rpm-proc", "qcom,rpm-proc"; 161 162 glink-edge { 163 compatible = "qcom,glink-rpm"; 164 interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; 165 qcom,rpm-msg-ram = <&rpm_msg_ram>; 166 mboxes = <&apcs_glb 0>; 167 168 rpm_requests: rpm-requests { 169 compatible = "qcom,rpm-ipq9574"; 170 qcom,glink-channels = "rpm_requests"; 171 }; 172 }; 173 }; 174 175 reserved-memory { 176 #address-cells = <2>; 177 #size-cells = <2>; 178 ranges; 179 180 bootloader@4a100000 { 181 reg = <0x0 0x4a100000 0x0 0x400000>; 182 no-map; 183 }; 184 185 sbl@4a500000 { 186 reg = <0x0 0x4a500000 0x0 0x100000>; 187 no-map; 188 }; 189 190 tz_region: tz@4a600000 { 191 reg = <0x0 0x4a600000 0x0 0x400000>; 192 no-map; 193 }; 194 195 smem@4aa00000 { 196 compatible = "qcom,smem"; 197 reg = <0x0 0x4aa00000 0x0 0x100000>; 198 hwlocks = <&tcsr_mutex 0>; 199 no-map; 200 }; 201 }; 202 203 soc: soc@0 { 204 compatible = "simple-bus"; 205 #address-cells = <1>; 206 #size-cells = <1>; 207 ranges = <0 0 0 0xffffffff>; 208 209 rpm_msg_ram: sram@60000 { 210 compatible = "qcom,rpm-msg-ram"; 211 reg = <0x00060000 0x6000>; 212 }; 213 214 rng: rng@e3000 { 215 compatible = "qcom,prng-ee"; 216 reg = <0x000e3000 0x1000>; 217 clocks = <&gcc GCC_PRNG_AHB_CLK>; 218 clock-names = "core"; 219 }; 220 221 qfprom: efuse@a4000 { 222 compatible = "qcom,ipq9574-qfprom", "qcom,qfprom"; 223 reg = <0x000a4000 0x5a1>; 224 #address-cells = <1>; 225 #size-cells = <1>; 226 }; 227 228 cryptobam: dma-controller@704000 { 229 compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; 230 reg = <0x00704000 0x20000>; 231 interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; 232 #dma-cells = <1>; 233 qcom,ee = <1>; 234 qcom,controlled-remotely; 235 }; 236 237 crypto: crypto@73a000 { 238 compatible = "qcom,ipq9574-qce", "qcom,ipq4019-qce", "qcom,qce"; 239 reg = <0x0073a000 0x6000>; 240 clocks = <&gcc GCC_CRYPTO_AHB_CLK>, 241 <&gcc GCC_CRYPTO_AXI_CLK>, 242 <&gcc GCC_CRYPTO_CLK>; 243 clock-names = "iface", "bus", "core"; 244 dmas = <&cryptobam 2>, <&cryptobam 3>; 245 dma-names = "rx", "tx"; 246 }; 247 248 tsens: thermal-sensor@4a9000 { 249 compatible = "qcom,ipq9574-tsens", "qcom,ipq8074-tsens"; 250 reg = <0x004a9000 0x1000>, 251 <0x004a8000 0x1000>; 252 interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; 253 interrupt-names = "combined"; 254 #qcom,sensors = <16>; 255 #thermal-sensor-cells = <1>; 256 }; 257 258 tlmm: pinctrl@1000000 { 259 compatible = "qcom,ipq9574-tlmm"; 260 reg = <0x01000000 0x300000>; 261 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; 262 gpio-controller; 263 #gpio-cells = <2>; 264 gpio-ranges = <&tlmm 0 0 65>; 265 interrupt-controller; 266 #interrupt-cells = <2>; 267 268 uart2_pins: uart2-state { 269 pins = "gpio34", "gpio35"; 270 function = "blsp2_uart"; 271 drive-strength = <8>; 272 bias-disable; 273 }; 274 }; 275 276 gcc: clock-controller@1800000 { 277 compatible = "qcom,ipq9574-gcc"; 278 reg = <0x01800000 0x80000>; 279 clocks = <&xo_board_clk>, 280 <&sleep_clk>, 281 <0>, 282 <0>, 283 <0>, 284 <0>, 285 <0>, 286 <0>; 287 #clock-cells = <1>; 288 #reset-cells = <1>; 289 #power-domain-cells = <1>; 290 }; 291 292 tcsr_mutex: hwlock@1905000 { 293 compatible = "qcom,tcsr-mutex"; 294 reg = <0x01905000 0x20000>; 295 #hwlock-cells = <1>; 296 }; 297 298 tcsr: syscon@1937000 { 299 compatible = "qcom,tcsr-ipq9574", "syscon"; 300 reg = <0x01937000 0x21000>; 301 }; 302 303 sdhc_1: mmc@7804000 { 304 compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5"; 305 reg = <0x07804000 0x1000>, <0x07805000 0x1000>; 306 reg-names = "hc", "cqhci"; 307 308 interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, 309 <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; 310 interrupt-names = "hc_irq", "pwr_irq"; 311 312 clocks = <&gcc GCC_SDCC1_AHB_CLK>, 313 <&gcc GCC_SDCC1_APPS_CLK>, 314 <&xo_board_clk>; 315 clock-names = "iface", "core", "xo"; 316 non-removable; 317 status = "disabled"; 318 }; 319 320 blsp_dma: dma-controller@7884000 { 321 compatible = "qcom,bam-v1.7.0"; 322 reg = <0x07884000 0x2b000>; 323 interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; 324 clocks = <&gcc GCC_BLSP1_AHB_CLK>; 325 clock-names = "bam_clk"; 326 #dma-cells = <1>; 327 qcom,ee = <0>; 328 }; 329 330 blsp1_uart0: serial@78af000 { 331 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 332 reg = <0x078af000 0x200>; 333 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; 334 clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, 335 <&gcc GCC_BLSP1_AHB_CLK>; 336 clock-names = "core", "iface"; 337 status = "disabled"; 338 }; 339 340 blsp1_uart1: serial@78b0000 { 341 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 342 reg = <0x078b0000 0x200>; 343 interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; 344 clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, 345 <&gcc GCC_BLSP1_AHB_CLK>; 346 clock-names = "core", "iface"; 347 status = "disabled"; 348 }; 349 350 blsp1_uart2: serial@78b1000 { 351 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 352 reg = <0x078b1000 0x200>; 353 interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; 354 clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, 355 <&gcc GCC_BLSP1_AHB_CLK>; 356 clock-names = "core", "iface"; 357 status = "disabled"; 358 }; 359 360 blsp1_uart3: serial@78b2000 { 361 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 362 reg = <0x078b2000 0x200>; 363 interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; 364 clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>, 365 <&gcc GCC_BLSP1_AHB_CLK>; 366 clock-names = "core", "iface"; 367 status = "disabled"; 368 }; 369 370 blsp1_uart4: serial@78b3000 { 371 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 372 reg = <0x078b3000 0x200>; 373 interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; 374 clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>, 375 <&gcc GCC_BLSP1_AHB_CLK>; 376 clock-names = "core", "iface"; 377 status = "disabled"; 378 }; 379 380 blsp1_uart5: serial@78b4000 { 381 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 382 reg = <0x078b4000 0x200>; 383 interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>; 384 clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>, 385 <&gcc GCC_BLSP1_AHB_CLK>; 386 clock-names = "core", "iface"; 387 status = "disabled"; 388 }; 389 390 blsp1_spi0: spi@78b5000 { 391 compatible = "qcom,spi-qup-v2.2.1"; 392 reg = <0x078b5000 0x600>; 393 #address-cells = <1>; 394 #size-cells = <0>; 395 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; 396 clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, 397 <&gcc GCC_BLSP1_AHB_CLK>; 398 clock-names = "core", "iface"; 399 dmas = <&blsp_dma 12>, <&blsp_dma 13>; 400 dma-names = "tx", "rx"; 401 status = "disabled"; 402 }; 403 404 blsp1_i2c1: i2c@78b6000 { 405 compatible = "qcom,i2c-qup-v2.2.1"; 406 reg = <0x078b6000 0x600>; 407 #address-cells = <1>; 408 #size-cells = <0>; 409 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; 410 clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, 411 <&gcc GCC_BLSP1_AHB_CLK>; 412 clock-names = "core", "iface"; 413 assigned-clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; 414 assigned-clock-rates = <50000000>; 415 dmas = <&blsp_dma 14>, <&blsp_dma 15>; 416 dma-names = "tx", "rx"; 417 status = "disabled"; 418 }; 419 420 blsp1_spi1: spi@78b6000 { 421 compatible = "qcom,spi-qup-v2.2.1"; 422 reg = <0x078b6000 0x600>; 423 #address-cells = <1>; 424 #size-cells = <0>; 425 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; 426 clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, 427 <&gcc GCC_BLSP1_AHB_CLK>; 428 clock-names = "core", "iface"; 429 dmas = <&blsp_dma 14>, <&blsp_dma 15>; 430 dma-names = "tx", "rx"; 431 status = "disabled"; 432 }; 433 434 blsp1_i2c2: i2c@78b7000 { 435 compatible = "qcom,i2c-qup-v2.2.1"; 436 reg = <0x078b7000 0x600>; 437 #address-cells = <1>; 438 #size-cells = <0>; 439 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; 440 clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, 441 <&gcc GCC_BLSP1_AHB_CLK>; 442 clock-names = "core", "iface"; 443 assigned-clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; 444 assigned-clock-rates = <50000000>; 445 dmas = <&blsp_dma 16>, <&blsp_dma 17>; 446 dma-names = "tx", "rx"; 447 status = "disabled"; 448 }; 449 450 blsp1_spi2: spi@78b7000 { 451 compatible = "qcom,spi-qup-v2.2.1"; 452 reg = <0x078b7000 0x600>; 453 #address-cells = <1>; 454 #size-cells = <0>; 455 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; 456 clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, 457 <&gcc GCC_BLSP1_AHB_CLK>; 458 clock-names = "core", "iface"; 459 dmas = <&blsp_dma 16>, <&blsp_dma 17>; 460 dma-names = "tx", "rx"; 461 status = "disabled"; 462 }; 463 464 blsp1_i2c3: i2c@78b8000 { 465 compatible = "qcom,i2c-qup-v2.2.1"; 466 reg = <0x078b8000 0x600>; 467 #address-cells = <1>; 468 #size-cells = <0>; 469 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; 470 clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, 471 <&gcc GCC_BLSP1_AHB_CLK>; 472 clock-names = "core", "iface"; 473 assigned-clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; 474 assigned-clock-rates = <50000000>; 475 dmas = <&blsp_dma 18>, <&blsp_dma 19>; 476 dma-names = "tx", "rx"; 477 status = "disabled"; 478 }; 479 480 blsp1_spi3: spi@78b8000 { 481 compatible = "qcom,spi-qup-v2.2.1"; 482 reg = <0x078b8000 0x600>; 483 #address-cells = <1>; 484 #size-cells = <0>; 485 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; 486 spi-max-frequency = <50000000>; 487 clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, 488 <&gcc GCC_BLSP1_AHB_CLK>; 489 clock-names = "core", "iface"; 490 dmas = <&blsp_dma 18>, <&blsp_dma 19>; 491 dma-names = "tx", "rx"; 492 status = "disabled"; 493 }; 494 495 blsp1_i2c4: i2c@78b9000 { 496 compatible = "qcom,i2c-qup-v2.2.1"; 497 reg = <0x078b9000 0x600>; 498 #address-cells = <1>; 499 #size-cells = <0>; 500 interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; 501 clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, 502 <&gcc GCC_BLSP1_AHB_CLK>; 503 clock-names = "core", "iface"; 504 assigned-clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; 505 assigned-clock-rates = <50000000>; 506 dmas = <&blsp_dma 20>, <&blsp_dma 21>; 507 dma-names = "tx", "rx"; 508 status = "disabled"; 509 }; 510 511 blsp1_spi4: spi@78b9000 { 512 compatible = "qcom,spi-qup-v2.2.1"; 513 reg = <0x078b9000 0x600>; 514 #address-cells = <1>; 515 #size-cells = <0>; 516 interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; 517 clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, 518 <&gcc GCC_BLSP1_AHB_CLK>; 519 clock-names = "core", "iface"; 520 dmas = <&blsp_dma 20>, <&blsp_dma 21>; 521 dma-names = "tx", "rx"; 522 status = "disabled"; 523 }; 524 525 usb_0_qusbphy: phy@7b000 { 526 compatible = "qcom,ipq9574-qusb2-phy"; 527 reg = <0x0007b000 0x180>; 528 #phy-cells = <0>; 529 530 clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, 531 <&xo_board_clk>; 532 clock-names = "cfg_ahb", 533 "ref"; 534 535 resets = <&gcc GCC_QUSB2_0_PHY_BCR>; 536 status = "disabled"; 537 }; 538 539 usb_0_qmpphy: phy@7d000 { 540 compatible = "qcom,ipq9574-qmp-usb3-phy"; 541 reg = <0x0007d000 0xa00>; 542 #phy-cells = <0>; 543 544 clocks = <&gcc GCC_USB0_AUX_CLK>, 545 <&xo_board_clk>, 546 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, 547 <&gcc GCC_USB0_PIPE_CLK>; 548 clock-names = "aux", 549 "ref", 550 "cfg_ahb", 551 "pipe"; 552 553 resets = <&gcc GCC_USB0_PHY_BCR>, 554 <&gcc GCC_USB3PHY_0_PHY_BCR>; 555 reset-names = "phy", 556 "phy_phy"; 557 558 #clock-cells = <0>; 559 clock-output-names = "usb0_pipe_clk"; 560 561 status = "disabled"; 562 }; 563 564 usb3: usb@8af8800 { 565 compatible = "qcom,ipq9574-dwc3", "qcom,dwc3"; 566 reg = <0x08af8800 0x400>; 567 #address-cells = <1>; 568 #size-cells = <1>; 569 ranges; 570 571 clocks = <&gcc GCC_SNOC_USB_CLK>, 572 <&gcc GCC_USB0_MASTER_CLK>, 573 <&gcc GCC_ANOC_USB_AXI_CLK>, 574 <&gcc GCC_USB0_SLEEP_CLK>, 575 <&gcc GCC_USB0_MOCK_UTMI_CLK>; 576 577 clock-names = "cfg_noc", 578 "core", 579 "iface", 580 "sleep", 581 "mock_utmi"; 582 583 assigned-clocks = <&gcc GCC_USB0_MASTER_CLK>, 584 <&gcc GCC_USB0_MOCK_UTMI_CLK>; 585 assigned-clock-rates = <200000000>, 586 <24000000>; 587 588 interrupts-extended = <&intc GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; 589 interrupt-names = "pwr_event"; 590 591 resets = <&gcc GCC_USB_BCR>; 592 status = "disabled"; 593 594 usb_0_dwc3: usb@8a00000 { 595 compatible = "snps,dwc3"; 596 reg = <0x8a00000 0xcd00>; 597 clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>; 598 clock-names = "ref"; 599 interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; 600 phys = <&usb_0_qusbphy>, <&usb_0_qmpphy>; 601 phy-names = "usb2-phy", "usb3-phy"; 602 tx-fifo-resize; 603 snps,is-utmi-l1-suspend; 604 snps,hird-threshold = /bits/ 8 <0x0>; 605 snps,dis_u2_susphy_quirk; 606 snps,dis_u3_susphy_quirk; 607 }; 608 }; 609 610 intc: interrupt-controller@b000000 { 611 compatible = "qcom,msm-qgic2"; 612 reg = <0x0b000000 0x1000>, /* GICD */ 613 <0x0b002000 0x2000>, /* GICC */ 614 <0x0b001000 0x1000>, /* GICH */ 615 <0x0b004000 0x2000>; /* GICV */ 616 #address-cells = <1>; 617 #size-cells = <1>; 618 interrupt-controller; 619 #interrupt-cells = <3>; 620 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; 621 ranges = <0 0x0b00c000 0x3000>; 622 623 v2m0: v2m@0 { 624 compatible = "arm,gic-v2m-frame"; 625 reg = <0x00000000 0xffd>; 626 msi-controller; 627 }; 628 629 v2m1: v2m@1000 { 630 compatible = "arm,gic-v2m-frame"; 631 reg = <0x00001000 0xffd>; 632 msi-controller; 633 }; 634 635 v2m2: v2m@2000 { 636 compatible = "arm,gic-v2m-frame"; 637 reg = <0x00002000 0xffd>; 638 msi-controller; 639 }; 640 }; 641 642 watchdog: watchdog@b017000 { 643 compatible = "qcom,apss-wdt-ipq9574", "qcom,kpss-wdt"; 644 reg = <0x0b017000 0x1000>; 645 interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; 646 clocks = <&sleep_clk>; 647 timeout-sec = <30>; 648 }; 649 650 apcs_glb: mailbox@b111000 { 651 compatible = "qcom,ipq9574-apcs-apps-global", 652 "qcom,ipq6018-apcs-apps-global"; 653 reg = <0x0b111000 0x1000>; 654 #clock-cells = <1>; 655 clocks = <&a73pll>, <&xo_board_clk>; 656 clock-names = "pll", "xo"; 657 #mbox-cells = <1>; 658 }; 659 660 a73pll: clock@b116000 { 661 compatible = "qcom,ipq9574-a73pll"; 662 reg = <0x0b116000 0x40>; 663 #clock-cells = <0>; 664 clocks = <&xo_board_clk>; 665 clock-names = "xo"; 666 }; 667 668 timer@b120000 { 669 compatible = "arm,armv7-timer-mem"; 670 reg = <0x0b120000 0x1000>; 671 #address-cells = <1>; 672 #size-cells = <1>; 673 ranges; 674 675 frame@b120000 { 676 reg = <0x0b121000 0x1000>, 677 <0x0b122000 0x1000>; 678 frame-number = <0>; 679 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, 680 <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; 681 }; 682 683 frame@b123000 { 684 reg = <0x0b123000 0x1000>; 685 frame-number = <1>; 686 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; 687 status = "disabled"; 688 }; 689 690 frame@b124000 { 691 reg = <0x0b124000 0x1000>; 692 frame-number = <2>; 693 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; 694 status = "disabled"; 695 }; 696 697 frame@b125000 { 698 reg = <0x0b125000 0x1000>; 699 frame-number = <3>; 700 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; 701 status = "disabled"; 702 }; 703 704 frame@b126000 { 705 reg = <0x0b126000 0x1000>; 706 frame-number = <4>; 707 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; 708 status = "disabled"; 709 }; 710 711 frame@b127000 { 712 reg = <0x0b127000 0x1000>; 713 frame-number = <5>; 714 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; 715 status = "disabled"; 716 }; 717 718 frame@b128000 { 719 reg = <0x0b128000 0x1000>; 720 frame-number = <6>; 721 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; 722 status = "disabled"; 723 }; 724 }; 725 }; 726 727 thermal-zones { 728 nss-top-thermal { 729 polling-delay-passive = <0>; 730 polling-delay = <0>; 731 thermal-sensors = <&tsens 3>; 732 733 trips { 734 nss-top-critical { 735 temperature = <125000>; 736 hysteresis = <1000>; 737 type = "critical"; 738 }; 739 }; 740 }; 741 742 ubi-0-thermal { 743 polling-delay-passive = <0>; 744 polling-delay = <0>; 745 thermal-sensors = <&tsens 4>; 746 747 trips { 748 ubi_0-critical { 749 temperature = <125000>; 750 hysteresis = <1000>; 751 type = "critical"; 752 }; 753 }; 754 }; 755 756 ubi-1-thermal { 757 polling-delay-passive = <0>; 758 polling-delay = <0>; 759 thermal-sensors = <&tsens 5>; 760 761 trips { 762 ubi_1-critical { 763 temperature = <125000>; 764 hysteresis = <1000>; 765 type = "critical"; 766 }; 767 }; 768 }; 769 770 ubi-2-thermal { 771 polling-delay-passive = <0>; 772 polling-delay = <0>; 773 thermal-sensors = <&tsens 6>; 774 775 trips { 776 ubi_2-critical { 777 temperature = <125000>; 778 hysteresis = <1000>; 779 type = "critical"; 780 }; 781 }; 782 }; 783 784 ubi-3-thermal { 785 polling-delay-passive = <0>; 786 polling-delay = <0>; 787 thermal-sensors = <&tsens 7>; 788 789 trips { 790 ubi_3-critical { 791 temperature = <125000>; 792 hysteresis = <1000>; 793 type = "critical"; 794 }; 795 }; 796 }; 797 798 cpuss0-thermal { 799 polling-delay-passive = <0>; 800 polling-delay = <0>; 801 thermal-sensors = <&tsens 8>; 802 803 trips { 804 cpu-critical { 805 temperature = <125000>; 806 hysteresis = <1000>; 807 type = "critical"; 808 }; 809 }; 810 }; 811 812 cpuss1-thermal { 813 polling-delay-passive = <0>; 814 polling-delay = <0>; 815 thermal-sensors = <&tsens 9>; 816 817 trips { 818 cpu-critical { 819 temperature = <125000>; 820 hysteresis = <1000>; 821 type = "critical"; 822 }; 823 }; 824 }; 825 826 cpu0-thermal { 827 polling-delay-passive = <0>; 828 polling-delay = <0>; 829 thermal-sensors = <&tsens 10>; 830 831 trips { 832 cpu0_crit: cpu-critical { 833 temperature = <120000>; 834 hysteresis = <10000>; 835 type = "critical"; 836 }; 837 838 cpu0_alert: cpu-passive { 839 temperature = <110000>; 840 hysteresis = <1000>; 841 type = "passive"; 842 }; 843 }; 844 845 cooling-maps { 846 map0 { 847 trip = <&cpu0_alert>; 848 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 849 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 850 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 851 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 852 }; 853 }; 854 }; 855 856 cpu1-thermal { 857 polling-delay-passive = <0>; 858 polling-delay = <0>; 859 thermal-sensors = <&tsens 11>; 860 861 trips { 862 cpu1_crit: cpu-critical { 863 temperature = <120000>; 864 hysteresis = <10000>; 865 type = "critical"; 866 }; 867 868 cpu1_alert: cpu-passive { 869 temperature = <110000>; 870 hysteresis = <1000>; 871 type = "passive"; 872 }; 873 }; 874 875 cooling-maps { 876 map0 { 877 trip = <&cpu1_alert>; 878 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 879 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 880 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 881 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 882 }; 883 }; 884 }; 885 886 cpu2-thermal { 887 polling-delay-passive = <0>; 888 polling-delay = <0>; 889 thermal-sensors = <&tsens 12>; 890 891 trips { 892 cpu2_crit: cpu-critical { 893 temperature = <120000>; 894 hysteresis = <10000>; 895 type = "critical"; 896 }; 897 898 cpu2_alert: cpu-passive { 899 temperature = <110000>; 900 hysteresis = <1000>; 901 type = "passive"; 902 }; 903 }; 904 905 cooling-maps { 906 map0 { 907 trip = <&cpu2_alert>; 908 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 909 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 910 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 911 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 912 }; 913 }; 914 }; 915 916 cpu3-thermal { 917 polling-delay-passive = <0>; 918 polling-delay = <0>; 919 thermal-sensors = <&tsens 13>; 920 921 trips { 922 cpu3_crit: cpu-critical { 923 temperature = <120000>; 924 hysteresis = <10000>; 925 type = "critical"; 926 }; 927 928 cpu3_alert: cpu-passive { 929 temperature = <110000>; 930 hysteresis = <1000>; 931 type = "passive"; 932 }; 933 }; 934 935 cooling-maps { 936 map0 { 937 trip = <&cpu3_alert>; 938 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 939 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 940 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 941 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 942 }; 943 }; 944 }; 945 946 wcss-phyb-thermal { 947 polling-delay-passive = <0>; 948 polling-delay = <0>; 949 thermal-sensors = <&tsens 14>; 950 951 trips { 952 wcss_phyb-critical { 953 temperature = <125000>; 954 hysteresis = <1000>; 955 type = "critical"; 956 }; 957 }; 958 }; 959 960 top-glue-thermal { 961 polling-delay-passive = <0>; 962 polling-delay = <0>; 963 thermal-sensors = <&tsens 15>; 964 965 trips { 966 top_glue-critical { 967 temperature = <125000>; 968 hysteresis = <1000>; 969 type = "critical"; 970 }; 971 }; 972 }; 973 }; 974 975 timer { 976 compatible = "arm,armv8-timer"; 977 interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 978 <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 979 <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 980 <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; 981 }; 982}; 983