1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright 2019 NXP 4 */ 5 6#include <dt-bindings/clock/imx8mn-clock.h> 7#include <dt-bindings/gpio/gpio.h> 8#include <dt-bindings/input/input.h> 9#include <dt-bindings/interrupt-controller/arm-gic.h> 10#include <dt-bindings/thermal/thermal.h> 11 12#include "imx8mn-pinfunc.h" 13 14/ { 15 interrupt-parent = <&gic>; 16 #address-cells = <2>; 17 #size-cells = <2>; 18 19 aliases { 20 ethernet0 = &fec1; 21 gpio0 = &gpio1; 22 gpio1 = &gpio2; 23 gpio2 = &gpio3; 24 gpio3 = &gpio4; 25 gpio4 = &gpio5; 26 i2c0 = &i2c1; 27 i2c1 = &i2c2; 28 i2c2 = &i2c3; 29 i2c3 = &i2c4; 30 mmc0 = &usdhc1; 31 mmc1 = &usdhc2; 32 mmc2 = &usdhc3; 33 serial0 = &uart1; 34 serial1 = &uart2; 35 serial2 = &uart3; 36 serial3 = &uart4; 37 spi0 = &ecspi1; 38 spi1 = &ecspi2; 39 spi2 = &ecspi3; 40 }; 41 42 cpus { 43 #address-cells = <1>; 44 #size-cells = <0>; 45 46 idle-states { 47 entry-method = "psci"; 48 49 cpu_pd_wait: cpu-pd-wait { 50 compatible = "arm,idle-state"; 51 arm,psci-suspend-param = <0x0010033>; 52 local-timer-stop; 53 entry-latency-us = <1000>; 54 exit-latency-us = <700>; 55 min-residency-us = <2700>; 56 }; 57 }; 58 59 A53_0: cpu@0 { 60 device_type = "cpu"; 61 compatible = "arm,cortex-a53"; 62 reg = <0x0>; 63 clock-latency = <61036>; 64 clocks = <&clk IMX8MN_CLK_ARM>; 65 enable-method = "psci"; 66 next-level-cache = <&A53_L2>; 67 operating-points-v2 = <&a53_opp_table>; 68 nvmem-cells = <&cpu_speed_grade>; 69 nvmem-cell-names = "speed_grade"; 70 cpu-idle-states = <&cpu_pd_wait>; 71 #cooling-cells = <2>; 72 }; 73 74 A53_1: cpu@1 { 75 device_type = "cpu"; 76 compatible = "arm,cortex-a53"; 77 reg = <0x1>; 78 clock-latency = <61036>; 79 clocks = <&clk IMX8MN_CLK_ARM>; 80 enable-method = "psci"; 81 next-level-cache = <&A53_L2>; 82 operating-points-v2 = <&a53_opp_table>; 83 cpu-idle-states = <&cpu_pd_wait>; 84 #cooling-cells = <2>; 85 }; 86 87 A53_2: cpu@2 { 88 device_type = "cpu"; 89 compatible = "arm,cortex-a53"; 90 reg = <0x2>; 91 clock-latency = <61036>; 92 clocks = <&clk IMX8MN_CLK_ARM>; 93 enable-method = "psci"; 94 next-level-cache = <&A53_L2>; 95 operating-points-v2 = <&a53_opp_table>; 96 cpu-idle-states = <&cpu_pd_wait>; 97 #cooling-cells = <2>; 98 }; 99 100 A53_3: cpu@3 { 101 device_type = "cpu"; 102 compatible = "arm,cortex-a53"; 103 reg = <0x3>; 104 clock-latency = <61036>; 105 clocks = <&clk IMX8MN_CLK_ARM>; 106 enable-method = "psci"; 107 next-level-cache = <&A53_L2>; 108 operating-points-v2 = <&a53_opp_table>; 109 cpu-idle-states = <&cpu_pd_wait>; 110 #cooling-cells = <2>; 111 }; 112 113 A53_L2: l2-cache0 { 114 compatible = "cache"; 115 }; 116 }; 117 118 a53_opp_table: opp-table { 119 compatible = "operating-points-v2"; 120 opp-shared; 121 122 opp-1200000000 { 123 opp-hz = /bits/ 64 <1200000000>; 124 opp-microvolt = <850000>; 125 opp-supported-hw = <0xb00>, <0x7>; 126 clock-latency-ns = <150000>; 127 opp-suspend; 128 }; 129 130 opp-1400000000 { 131 opp-hz = /bits/ 64 <1400000000>; 132 opp-microvolt = <950000>; 133 opp-supported-hw = <0x300>, <0x7>; 134 clock-latency-ns = <150000>; 135 opp-suspend; 136 }; 137 138 opp-1500000000 { 139 opp-hz = /bits/ 64 <1500000000>; 140 opp-microvolt = <1000000>; 141 opp-supported-hw = <0x100>, <0x3>; 142 clock-latency-ns = <150000>; 143 opp-suspend; 144 }; 145 }; 146 147 osc_32k: clock-osc-32k { 148 compatible = "fixed-clock"; 149 #clock-cells = <0>; 150 clock-frequency = <32768>; 151 clock-output-names = "osc_32k"; 152 }; 153 154 osc_24m: clock-osc-24m { 155 compatible = "fixed-clock"; 156 #clock-cells = <0>; 157 clock-frequency = <24000000>; 158 clock-output-names = "osc_24m"; 159 }; 160 161 clk_ext1: clock-ext1 { 162 compatible = "fixed-clock"; 163 #clock-cells = <0>; 164 clock-frequency = <133000000>; 165 clock-output-names = "clk_ext1"; 166 }; 167 168 clk_ext2: clock-ext2 { 169 compatible = "fixed-clock"; 170 #clock-cells = <0>; 171 clock-frequency = <133000000>; 172 clock-output-names = "clk_ext2"; 173 }; 174 175 clk_ext3: clock-ext3 { 176 compatible = "fixed-clock"; 177 #clock-cells = <0>; 178 clock-frequency = <133000000>; 179 clock-output-names = "clk_ext3"; 180 }; 181 182 clk_ext4: clock-ext4 { 183 compatible = "fixed-clock"; 184 #clock-cells = <0>; 185 clock-frequency= <133000000>; 186 clock-output-names = "clk_ext4"; 187 }; 188 189 pmu { 190 compatible = "arm,cortex-a53-pmu"; 191 interrupts = <GIC_PPI 7 192 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; 193 interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>; 194 }; 195 196 psci { 197 compatible = "arm,psci-1.0"; 198 method = "smc"; 199 }; 200 201 thermal-zones { 202 cpu-thermal { 203 polling-delay-passive = <250>; 204 polling-delay = <2000>; 205 thermal-sensors = <&tmu>; 206 trips { 207 cpu_alert0: trip0 { 208 temperature = <85000>; 209 hysteresis = <2000>; 210 type = "passive"; 211 }; 212 213 cpu_crit0: trip1 { 214 temperature = <95000>; 215 hysteresis = <2000>; 216 type = "critical"; 217 }; 218 }; 219 220 cooling-maps { 221 map0 { 222 trip = <&cpu_alert0>; 223 cooling-device = 224 <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 225 <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 226 <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 227 <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 228 }; 229 }; 230 }; 231 }; 232 233 timer { 234 compatible = "arm,armv8-timer"; 235 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 236 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 237 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 238 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; 239 clock-frequency = <8000000>; 240 arm,no-tick-in-suspend; 241 }; 242 243 soc@0 { 244 compatible = "simple-bus"; 245 #address-cells = <1>; 246 #size-cells = <1>; 247 ranges = <0x0 0x0 0x0 0x3e000000>; 248 249 aips1: bus@30000000 { 250 compatible = "fsl,aips-bus", "simple-bus"; 251 reg = <0x30000000 0x400000>; 252 #address-cells = <1>; 253 #size-cells = <1>; 254 ranges; 255 256 spba: bus@30000000 { 257 compatible = "fsl,spba-bus", "simple-bus"; 258 #address-cells = <1>; 259 #size-cells = <1>; 260 reg = <0x30000000 0x100000>; 261 ranges; 262 263 sai2: sai@30020000 { 264 compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; 265 reg = <0x30020000 0x10000>; 266 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; 267 clocks = <&clk IMX8MN_CLK_SAI2_IPG>, 268 <&clk IMX8MN_CLK_DUMMY>, 269 <&clk IMX8MN_CLK_SAI2_ROOT>, 270 <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>; 271 clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; 272 dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>; 273 dma-names = "rx", "tx"; 274 status = "disabled"; 275 }; 276 277 sai3: sai@30030000 { 278 compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; 279 reg = <0x30030000 0x10000>; 280 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; 281 clocks = <&clk IMX8MN_CLK_SAI3_IPG>, 282 <&clk IMX8MN_CLK_DUMMY>, 283 <&clk IMX8MN_CLK_SAI3_ROOT>, 284 <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>; 285 clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; 286 dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>; 287 dma-names = "rx", "tx"; 288 status = "disabled"; 289 }; 290 291 sai5: sai@30050000 { 292 compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; 293 reg = <0x30050000 0x10000>; 294 interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; 295 clocks = <&clk IMX8MN_CLK_SAI5_IPG>, 296 <&clk IMX8MN_CLK_DUMMY>, 297 <&clk IMX8MN_CLK_SAI5_ROOT>, 298 <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>; 299 clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; 300 dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>; 301 dma-names = "rx", "tx"; 302 fsl,shared-interrupt; 303 fsl,dataline = <0 0xf 0xf>; 304 status = "disabled"; 305 }; 306 307 sai6: sai@30060000 { 308 compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; 309 reg = <0x30060000 0x10000>; 310 interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; 311 clocks = <&clk IMX8MN_CLK_SAI6_IPG>, 312 <&clk IMX8MN_CLK_DUMMY>, 313 <&clk IMX8MN_CLK_SAI6_ROOT>, 314 <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>; 315 clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; 316 dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>; 317 dma-names = "rx", "tx"; 318 status = "disabled"; 319 }; 320 321 micfil: audio-controller@30080000 { 322 compatible = "fsl,imx8mm-micfil"; 323 reg = <0x30080000 0x10000>; 324 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, 325 <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, 326 <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, 327 <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; 328 clocks = <&clk IMX8MN_CLK_PDM_IPG>, 329 <&clk IMX8MN_CLK_PDM_ROOT>, 330 <&clk IMX8MN_AUDIO_PLL1_OUT>, 331 <&clk IMX8MN_AUDIO_PLL2_OUT>, 332 <&clk IMX8MN_CLK_EXT3>; 333 clock-names = "ipg_clk", "ipg_clk_app", 334 "pll8k", "pll11k", "clkext3"; 335 dmas = <&sdma2 24 25 0x80000000>; 336 dma-names = "rx"; 337 status = "disabled"; 338 }; 339 340 spdif1: spdif@30090000 { 341 compatible = "fsl,imx35-spdif"; 342 reg = <0x30090000 0x10000>; 343 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; 344 clocks = <&clk IMX8MN_CLK_AUDIO_AHB>, /* core */ 345 <&clk IMX8MN_CLK_24M>, /* rxtx0 */ 346 <&clk IMX8MN_CLK_SPDIF1>, /* rxtx1 */ 347 <&clk IMX8MN_CLK_DUMMY>, /* rxtx2 */ 348 <&clk IMX8MN_CLK_DUMMY>, /* rxtx3 */ 349 <&clk IMX8MN_CLK_DUMMY>, /* rxtx4 */ 350 <&clk IMX8MN_CLK_AUDIO_AHB>, /* rxtx5 */ 351 <&clk IMX8MN_CLK_DUMMY>, /* rxtx6 */ 352 <&clk IMX8MN_CLK_DUMMY>, /* rxtx7 */ 353 <&clk IMX8MN_CLK_DUMMY>; /* spba */ 354 clock-names = "core", "rxtx0", 355 "rxtx1", "rxtx2", 356 "rxtx3", "rxtx4", 357 "rxtx5", "rxtx6", 358 "rxtx7", "spba"; 359 dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>; 360 dma-names = "rx", "tx"; 361 status = "disabled"; 362 }; 363 364 sai7: sai@300b0000 { 365 compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; 366 reg = <0x300b0000 0x10000>; 367 interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; 368 clocks = <&clk IMX8MN_CLK_SAI7_IPG>, 369 <&clk IMX8MN_CLK_DUMMY>, 370 <&clk IMX8MN_CLK_SAI7_ROOT>, 371 <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>; 372 clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; 373 dmas = <&sdma2 12 2 0>, <&sdma2 13 2 0>; 374 dma-names = "rx", "tx"; 375 status = "disabled"; 376 }; 377 378 easrc: easrc@300c0000 { 379 compatible = "fsl,imx8mn-easrc"; 380 reg = <0x300c0000 0x10000>; 381 interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; 382 clocks = <&clk IMX8MN_CLK_ASRC_ROOT>; 383 clock-names = "mem"; 384 dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>, 385 <&sdma2 18 23 0> , <&sdma2 19 23 0>, 386 <&sdma2 20 23 0> , <&sdma2 21 23 0>, 387 <&sdma2 22 23 0> , <&sdma2 23 23 0>; 388 dma-names = "ctx0_rx", "ctx0_tx", 389 "ctx1_rx", "ctx1_tx", 390 "ctx2_rx", "ctx2_tx", 391 "ctx3_rx", "ctx3_tx"; 392 firmware-name = "imx/easrc/easrc-imx8mn.bin"; 393 fsl,asrc-rate = <8000>; 394 fsl,asrc-format = <2>; 395 status = "disabled"; 396 }; 397 }; 398 399 gpio1: gpio@30200000 { 400 compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio"; 401 reg = <0x30200000 0x10000>; 402 interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, 403 <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; 404 clocks = <&clk IMX8MN_CLK_GPIO1_ROOT>; 405 gpio-controller; 406 #gpio-cells = <2>; 407 interrupt-controller; 408 #interrupt-cells = <2>; 409 gpio-ranges = <&iomuxc 0 10 30>; 410 }; 411 412 gpio2: gpio@30210000 { 413 compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio"; 414 reg = <0x30210000 0x10000>; 415 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, 416 <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; 417 clocks = <&clk IMX8MN_CLK_GPIO2_ROOT>; 418 gpio-controller; 419 #gpio-cells = <2>; 420 interrupt-controller; 421 #interrupt-cells = <2>; 422 gpio-ranges = <&iomuxc 0 40 21>; 423 }; 424 425 gpio3: gpio@30220000 { 426 compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio"; 427 reg = <0x30220000 0x10000>; 428 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, 429 <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; 430 clocks = <&clk IMX8MN_CLK_GPIO3_ROOT>; 431 gpio-controller; 432 #gpio-cells = <2>; 433 interrupt-controller; 434 #interrupt-cells = <2>; 435 gpio-ranges = <&iomuxc 0 61 26>; 436 }; 437 438 gpio4: gpio@30230000 { 439 compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio"; 440 reg = <0x30230000 0x10000>; 441 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, 442 <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; 443 clocks = <&clk IMX8MN_CLK_GPIO4_ROOT>; 444 gpio-controller; 445 #gpio-cells = <2>; 446 interrupt-controller; 447 #interrupt-cells = <2>; 448 gpio-ranges = <&iomuxc 21 108 11>; 449 }; 450 451 gpio5: gpio@30240000 { 452 compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio"; 453 reg = <0x30240000 0x10000>; 454 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, 455 <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; 456 clocks = <&clk IMX8MN_CLK_GPIO5_ROOT>; 457 gpio-controller; 458 #gpio-cells = <2>; 459 interrupt-controller; 460 #interrupt-cells = <2>; 461 gpio-ranges = <&iomuxc 0 119 30>; 462 }; 463 464 tmu: tmu@30260000 { 465 compatible = "fsl,imx8mn-tmu", "fsl,imx8mm-tmu"; 466 reg = <0x30260000 0x10000>; 467 clocks = <&clk IMX8MN_CLK_TMU_ROOT>; 468 #thermal-sensor-cells = <0>; 469 }; 470 471 wdog1: watchdog@30280000 { 472 compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt"; 473 reg = <0x30280000 0x10000>; 474 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; 475 clocks = <&clk IMX8MN_CLK_WDOG1_ROOT>; 476 status = "disabled"; 477 }; 478 479 wdog2: watchdog@30290000 { 480 compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt"; 481 reg = <0x30290000 0x10000>; 482 interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; 483 clocks = <&clk IMX8MN_CLK_WDOG2_ROOT>; 484 status = "disabled"; 485 }; 486 487 wdog3: watchdog@302a0000 { 488 compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt"; 489 reg = <0x302a0000 0x10000>; 490 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; 491 clocks = <&clk IMX8MN_CLK_WDOG3_ROOT>; 492 status = "disabled"; 493 }; 494 495 sdma3: dma-controller@302b0000 { 496 compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma"; 497 reg = <0x302b0000 0x10000>; 498 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; 499 clocks = <&clk IMX8MN_CLK_SDMA3_ROOT>, 500 <&clk IMX8MN_CLK_SDMA3_ROOT>; 501 clock-names = "ipg", "ahb"; 502 #dma-cells = <3>; 503 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; 504 }; 505 506 sdma2: dma-controller@302c0000 { 507 compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma"; 508 reg = <0x302c0000 0x10000>; 509 interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; 510 clocks = <&clk IMX8MN_CLK_SDMA2_ROOT>, 511 <&clk IMX8MN_CLK_SDMA2_ROOT>; 512 clock-names = "ipg", "ahb"; 513 #dma-cells = <3>; 514 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; 515 }; 516 517 iomuxc: pinctrl@30330000 { 518 compatible = "fsl,imx8mn-iomuxc"; 519 reg = <0x30330000 0x10000>; 520 }; 521 522 gpr: iomuxc-gpr@30340000 { 523 compatible = "fsl,imx8mn-iomuxc-gpr", "syscon"; 524 reg = <0x30340000 0x10000>; 525 }; 526 527 ocotp: efuse@30350000 { 528 compatible = "fsl,imx8mn-ocotp", "fsl,imx8mm-ocotp", "syscon"; 529 reg = <0x30350000 0x10000>; 530 clocks = <&clk IMX8MN_CLK_OCOTP_ROOT>; 531 #address-cells = <1>; 532 #size-cells = <1>; 533 534 cpu_speed_grade: speed-grade@10 { 535 reg = <0x10 4>; 536 }; 537 }; 538 539 anatop: anatop@30360000 { 540 compatible = "fsl,imx8mn-anatop", "fsl,imx8mm-anatop", 541 "syscon"; 542 reg = <0x30360000 0x10000>; 543 }; 544 545 snvs: snvs@30370000 { 546 compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd"; 547 reg = <0x30370000 0x10000>; 548 549 snvs_rtc: snvs-rtc-lp { 550 compatible = "fsl,sec-v4.0-mon-rtc-lp"; 551 regmap = <&snvs>; 552 offset = <0x34>; 553 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, 554 <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; 555 clocks = <&clk IMX8MN_CLK_SNVS_ROOT>; 556 clock-names = "snvs-rtc"; 557 }; 558 559 snvs_pwrkey: snvs-powerkey { 560 compatible = "fsl,sec-v4.0-pwrkey"; 561 regmap = <&snvs>; 562 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; 563 clocks = <&clk IMX8MN_CLK_SNVS_ROOT>; 564 clock-names = "snvs-pwrkey"; 565 linux,keycode = <KEY_POWER>; 566 wakeup-source; 567 status = "disabled"; 568 }; 569 }; 570 571 clk: clock-controller@30380000 { 572 compatible = "fsl,imx8mn-ccm"; 573 reg = <0x30380000 0x10000>; 574 #clock-cells = <1>; 575 clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, 576 <&clk_ext3>, <&clk_ext4>; 577 clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", 578 "clk_ext3", "clk_ext4"; 579 assigned-clocks = <&clk IMX8MN_CLK_A53_SRC>, 580 <&clk IMX8MN_CLK_A53_CORE>, 581 <&clk IMX8MN_CLK_NOC>, 582 <&clk IMX8MN_CLK_AUDIO_AHB>, 583 <&clk IMX8MN_CLK_IPG_AUDIO_ROOT>, 584 <&clk IMX8MN_SYS_PLL3>; 585 assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_800M>, 586 <&clk IMX8MN_ARM_PLL_OUT>, 587 <&clk IMX8MN_SYS_PLL3_OUT>, 588 <&clk IMX8MN_SYS_PLL1_800M>; 589 assigned-clock-rates = <0>, <0>, <0>, 590 <400000000>, 591 <400000000>, 592 <600000000>; 593 }; 594 595 src: reset-controller@30390000 { 596 compatible = "fsl,imx8mn-src", "fsl,imx8mq-src", "syscon"; 597 reg = <0x30390000 0x10000>; 598 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; 599 #reset-cells = <1>; 600 }; 601 }; 602 603 aips2: bus@30400000 { 604 compatible = "fsl,aips-bus", "simple-bus"; 605 reg = <0x30400000 0x400000>; 606 #address-cells = <1>; 607 #size-cells = <1>; 608 ranges; 609 610 pwm1: pwm@30660000 { 611 compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm"; 612 reg = <0x30660000 0x10000>; 613 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; 614 clocks = <&clk IMX8MN_CLK_PWM1_ROOT>, 615 <&clk IMX8MN_CLK_PWM1_ROOT>; 616 clock-names = "ipg", "per"; 617 #pwm-cells = <2>; 618 status = "disabled"; 619 }; 620 621 pwm2: pwm@30670000 { 622 compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm"; 623 reg = <0x30670000 0x10000>; 624 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; 625 clocks = <&clk IMX8MN_CLK_PWM2_ROOT>, 626 <&clk IMX8MN_CLK_PWM2_ROOT>; 627 clock-names = "ipg", "per"; 628 #pwm-cells = <2>; 629 status = "disabled"; 630 }; 631 632 pwm3: pwm@30680000 { 633 compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm"; 634 reg = <0x30680000 0x10000>; 635 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; 636 clocks = <&clk IMX8MN_CLK_PWM3_ROOT>, 637 <&clk IMX8MN_CLK_PWM3_ROOT>; 638 clock-names = "ipg", "per"; 639 #pwm-cells = <2>; 640 status = "disabled"; 641 }; 642 643 pwm4: pwm@30690000 { 644 compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm"; 645 reg = <0x30690000 0x10000>; 646 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; 647 clocks = <&clk IMX8MN_CLK_PWM4_ROOT>, 648 <&clk IMX8MN_CLK_PWM4_ROOT>; 649 clock-names = "ipg", "per"; 650 #pwm-cells = <2>; 651 status = "disabled"; 652 }; 653 654 system_counter: timer@306a0000 { 655 compatible = "nxp,sysctr-timer"; 656 reg = <0x306a0000 0x20000>; 657 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; 658 clocks = <&osc_24m>; 659 clock-names = "per"; 660 }; 661 }; 662 663 aips3: bus@30800000 { 664 compatible = "fsl,aips-bus", "simple-bus"; 665 reg = <0x30800000 0x400000>; 666 #address-cells = <1>; 667 #size-cells = <1>; 668 ranges; 669 670 ecspi1: spi@30820000 { 671 compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; 672 #address-cells = <1>; 673 #size-cells = <0>; 674 reg = <0x30820000 0x10000>; 675 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; 676 clocks = <&clk IMX8MN_CLK_ECSPI1_ROOT>, 677 <&clk IMX8MN_CLK_ECSPI1_ROOT>; 678 clock-names = "ipg", "per"; 679 dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; 680 dma-names = "rx", "tx"; 681 status = "disabled"; 682 }; 683 684 ecspi2: spi@30830000 { 685 compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; 686 #address-cells = <1>; 687 #size-cells = <0>; 688 reg = <0x30830000 0x10000>; 689 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; 690 clocks = <&clk IMX8MN_CLK_ECSPI2_ROOT>, 691 <&clk IMX8MN_CLK_ECSPI2_ROOT>; 692 clock-names = "ipg", "per"; 693 dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; 694 dma-names = "rx", "tx"; 695 status = "disabled"; 696 }; 697 698 ecspi3: spi@30840000 { 699 compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; 700 #address-cells = <1>; 701 #size-cells = <0>; 702 reg = <0x30840000 0x10000>; 703 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; 704 clocks = <&clk IMX8MN_CLK_ECSPI3_ROOT>, 705 <&clk IMX8MN_CLK_ECSPI3_ROOT>; 706 clock-names = "ipg", "per"; 707 dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; 708 dma-names = "rx", "tx"; 709 status = "disabled"; 710 }; 711 712 uart1: serial@30860000 { 713 compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; 714 reg = <0x30860000 0x10000>; 715 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; 716 clocks = <&clk IMX8MN_CLK_UART1_ROOT>, 717 <&clk IMX8MN_CLK_UART1_ROOT>; 718 clock-names = "ipg", "per"; 719 dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; 720 dma-names = "rx", "tx"; 721 status = "disabled"; 722 }; 723 724 uart3: serial@30880000 { 725 compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; 726 reg = <0x30880000 0x10000>; 727 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; 728 clocks = <&clk IMX8MN_CLK_UART3_ROOT>, 729 <&clk IMX8MN_CLK_UART3_ROOT>; 730 clock-names = "ipg", "per"; 731 dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; 732 dma-names = "rx", "tx"; 733 status = "disabled"; 734 }; 735 736 uart2: serial@30890000 { 737 compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; 738 reg = <0x30890000 0x10000>; 739 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; 740 clocks = <&clk IMX8MN_CLK_UART2_ROOT>, 741 <&clk IMX8MN_CLK_UART2_ROOT>; 742 clock-names = "ipg", "per"; 743 status = "disabled"; 744 }; 745 746 crypto: crypto@30900000 { 747 compatible = "fsl,sec-v4.0"; 748 #address-cells = <1>; 749 #size-cells = <1>; 750 reg = <0x30900000 0x40000>; 751 ranges = <0 0x30900000 0x40000>; 752 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; 753 clocks = <&clk IMX8MN_CLK_AHB>, 754 <&clk IMX8MN_CLK_IPG_ROOT>; 755 clock-names = "aclk", "ipg"; 756 757 sec_jr0: jr@1000 { 758 compatible = "fsl,sec-v4.0-job-ring"; 759 reg = <0x1000 0x1000>; 760 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; 761 }; 762 763 sec_jr1: jr@2000 { 764 compatible = "fsl,sec-v4.0-job-ring"; 765 reg = <0x2000 0x1000>; 766 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; 767 }; 768 769 sec_jr2: jr@3000 { 770 compatible = "fsl,sec-v4.0-job-ring"; 771 reg = <0x3000 0x1000>; 772 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; 773 }; 774 }; 775 776 i2c1: i2c@30a20000 { 777 compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c"; 778 #address-cells = <1>; 779 #size-cells = <0>; 780 reg = <0x30a20000 0x10000>; 781 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; 782 clocks = <&clk IMX8MN_CLK_I2C1_ROOT>; 783 status = "disabled"; 784 }; 785 786 i2c2: i2c@30a30000 { 787 compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c"; 788 #address-cells = <1>; 789 #size-cells = <0>; 790 reg = <0x30a30000 0x10000>; 791 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; 792 clocks = <&clk IMX8MN_CLK_I2C2_ROOT>; 793 status = "disabled"; 794 }; 795 796 i2c3: i2c@30a40000 { 797 #address-cells = <1>; 798 #size-cells = <0>; 799 compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c"; 800 reg = <0x30a40000 0x10000>; 801 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; 802 clocks = <&clk IMX8MN_CLK_I2C3_ROOT>; 803 status = "disabled"; 804 }; 805 806 i2c4: i2c@30a50000 { 807 compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c"; 808 #address-cells = <1>; 809 #size-cells = <0>; 810 reg = <0x30a50000 0x10000>; 811 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; 812 clocks = <&clk IMX8MN_CLK_I2C4_ROOT>; 813 status = "disabled"; 814 }; 815 816 uart4: serial@30a60000 { 817 compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; 818 reg = <0x30a60000 0x10000>; 819 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; 820 clocks = <&clk IMX8MN_CLK_UART4_ROOT>, 821 <&clk IMX8MN_CLK_UART4_ROOT>; 822 clock-names = "ipg", "per"; 823 dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>; 824 dma-names = "rx", "tx"; 825 status = "disabled"; 826 }; 827 828 mu: mailbox@30aa0000 { 829 compatible = "fsl,imx8mn-mu", "fsl,imx6sx-mu"; 830 reg = <0x30aa0000 0x10000>; 831 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; 832 clocks = <&clk IMX8MN_CLK_MU_ROOT>; 833 #mbox-cells = <2>; 834 }; 835 836 usdhc1: mmc@30b40000 { 837 compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc"; 838 reg = <0x30b40000 0x10000>; 839 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; 840 clocks = <&clk IMX8MN_CLK_IPG_ROOT>, 841 <&clk IMX8MN_CLK_NAND_USDHC_BUS>, 842 <&clk IMX8MN_CLK_USDHC1_ROOT>; 843 clock-names = "ipg", "ahb", "per"; 844 fsl,tuning-start-tap = <20>; 845 fsl,tuning-step= <2>; 846 bus-width = <4>; 847 status = "disabled"; 848 }; 849 850 usdhc2: mmc@30b50000 { 851 compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc"; 852 reg = <0x30b50000 0x10000>; 853 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; 854 clocks = <&clk IMX8MN_CLK_IPG_ROOT>, 855 <&clk IMX8MN_CLK_NAND_USDHC_BUS>, 856 <&clk IMX8MN_CLK_USDHC2_ROOT>; 857 clock-names = "ipg", "ahb", "per"; 858 fsl,tuning-start-tap = <20>; 859 fsl,tuning-step= <2>; 860 bus-width = <4>; 861 status = "disabled"; 862 }; 863 864 usdhc3: mmc@30b60000 { 865 compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc"; 866 reg = <0x30b60000 0x10000>; 867 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; 868 clocks = <&clk IMX8MN_CLK_IPG_ROOT>, 869 <&clk IMX8MN_CLK_NAND_USDHC_BUS>, 870 <&clk IMX8MN_CLK_USDHC3_ROOT>; 871 clock-names = "ipg", "ahb", "per"; 872 fsl,tuning-start-tap = <20>; 873 fsl,tuning-step= <2>; 874 bus-width = <4>; 875 status = "disabled"; 876 }; 877 878 sdma1: dma-controller@30bd0000 { 879 compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma"; 880 reg = <0x30bd0000 0x10000>; 881 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; 882 clocks = <&clk IMX8MN_CLK_SDMA1_ROOT>, 883 <&clk IMX8MN_CLK_AHB>; 884 clock-names = "ipg", "ahb"; 885 #dma-cells = <3>; 886 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; 887 }; 888 889 fec1: ethernet@30be0000 { 890 compatible = "fsl,imx8mn-fec", "fsl,imx6sx-fec"; 891 reg = <0x30be0000 0x10000>; 892 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, 893 <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, 894 <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, 895 <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; 896 clocks = <&clk IMX8MN_CLK_ENET1_ROOT>, 897 <&clk IMX8MN_CLK_ENET1_ROOT>, 898 <&clk IMX8MN_CLK_ENET_TIMER>, 899 <&clk IMX8MN_CLK_ENET_REF>, 900 <&clk IMX8MN_CLK_ENET_PHY_REF>; 901 clock-names = "ipg", "ahb", "ptp", 902 "enet_clk_ref", "enet_out"; 903 assigned-clocks = <&clk IMX8MN_CLK_ENET_AXI>, 904 <&clk IMX8MN_CLK_ENET_TIMER>, 905 <&clk IMX8MN_CLK_ENET_REF>, 906 <&clk IMX8MN_CLK_ENET_TIMER>; 907 assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>, 908 <&clk IMX8MN_SYS_PLL2_100M>, 909 <&clk IMX8MN_SYS_PLL2_125M>; 910 assigned-clock-rates = <0>, <0>, <125000000>, <100000000>; 911 fsl,num-tx-queues = <3>; 912 fsl,num-rx-queues = <3>; 913 status = "disabled"; 914 }; 915 916 }; 917 918 aips4: bus@32c00000 { 919 compatible = "fsl,aips-bus", "simple-bus"; 920 reg = <0x32c00000 0x400000>; 921 #address-cells = <1>; 922 #size-cells = <1>; 923 ranges; 924 925 usbotg1: usb@32e40000 { 926 compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb"; 927 reg = <0x32e40000 0x200>; 928 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; 929 clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>; 930 clock-names = "usb1_ctrl_root_clk"; 931 assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>; 932 assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>; 933 fsl,usbphy = <&usbphynop1>; 934 fsl,usbmisc = <&usbmisc1 0>; 935 status = "disabled"; 936 }; 937 938 usbmisc1: usbmisc@32e40200 { 939 compatible = "fsl,imx8mn-usbmisc", "fsl,imx7d-usbmisc"; 940 #index-cells = <1>; 941 reg = <0x32e40200 0x200>; 942 }; 943 }; 944 945 dma_apbh: dma-controller@33000000 { 946 compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh"; 947 reg = <0x33000000 0x2000>; 948 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, 949 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, 950 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, 951 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; 952 interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; 953 #dma-cells = <1>; 954 dma-channels = <4>; 955 clocks = <&clk IMX8MN_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; 956 }; 957 958 gpmi: nand-controller@33002000 { 959 compatible = "fsl,imx8mn-gpmi-nand", "fsl,imx7d-gpmi-nand"; 960 #address-cells = <1>; 961 #size-cells = <1>; 962 reg = <0x33002000 0x2000>, <0x33004000 0x4000>; 963 reg-names = "gpmi-nand", "bch"; 964 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; 965 interrupt-names = "bch"; 966 clocks = <&clk IMX8MN_CLK_NAND_ROOT>, 967 <&clk IMX8MN_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; 968 clock-names = "gpmi_io", "gpmi_bch_apb"; 969 dmas = <&dma_apbh 0>; 970 dma-names = "rx-tx"; 971 status = "disabled"; 972 }; 973 974 gic: interrupt-controller@38800000 { 975 compatible = "arm,gic-v3"; 976 reg = <0x38800000 0x10000>, 977 <0x38880000 0xc0000>; 978 #interrupt-cells = <3>; 979 interrupt-controller; 980 interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; 981 }; 982 983 ddrc: memory-controller@3d400000 { 984 compatible = "fsl,imx8mn-ddrc", "fsl,imx8m-ddrc"; 985 reg = <0x3d400000 0x400000>; 986 clock-names = "core", "pll", "alt", "apb"; 987 clocks = <&clk IMX8MN_CLK_DRAM_CORE>, 988 <&clk IMX8MN_DRAM_PLL>, 989 <&clk IMX8MN_CLK_DRAM_ALT>, 990 <&clk IMX8MN_CLK_DRAM_APB>; 991 }; 992 993 ddr-pmu@3d800000 { 994 compatible = "fsl,imx8mn-ddr-pmu", "fsl,imx8m-ddr-pmu"; 995 reg = <0x3d800000 0x400000>; 996 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; 997 }; 998 }; 999 1000 usbphynop1: usbphynop1 { 1001 compatible = "usb-nop-xceiv"; 1002 clocks = <&clk IMX8MN_CLK_USB_PHY_REF>; 1003 assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>; 1004 assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>; 1005 clock-names = "main_clk"; 1006 }; 1007}; 1008