1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright 2019 NXP 4 */ 5 6#include <dt-bindings/clock/imx8mn-clock.h> 7#include <dt-bindings/gpio/gpio.h> 8#include <dt-bindings/input/input.h> 9#include <dt-bindings/interrupt-controller/arm-gic.h> 10#include <dt-bindings/thermal/thermal.h> 11 12#include "imx8mn-pinfunc.h" 13 14/ { 15 interrupt-parent = <&gic>; 16 #address-cells = <2>; 17 #size-cells = <2>; 18 19 aliases { 20 ethernet0 = &fec1; 21 gpio0 = &gpio1; 22 gpio1 = &gpio2; 23 gpio2 = &gpio3; 24 gpio3 = &gpio4; 25 gpio4 = &gpio5; 26 i2c0 = &i2c1; 27 i2c1 = &i2c2; 28 i2c2 = &i2c3; 29 i2c3 = &i2c4; 30 mmc0 = &usdhc1; 31 mmc1 = &usdhc2; 32 mmc2 = &usdhc3; 33 serial0 = &uart1; 34 serial1 = &uart2; 35 serial2 = &uart3; 36 serial3 = &uart4; 37 spi0 = &ecspi1; 38 spi1 = &ecspi2; 39 spi2 = &ecspi3; 40 }; 41 42 cpus { 43 #address-cells = <1>; 44 #size-cells = <0>; 45 46 idle-states { 47 entry-method = "psci"; 48 49 cpu_pd_wait: cpu-pd-wait { 50 compatible = "arm,idle-state"; 51 arm,psci-suspend-param = <0x0010033>; 52 local-timer-stop; 53 entry-latency-us = <1000>; 54 exit-latency-us = <700>; 55 min-residency-us = <2700>; 56 }; 57 }; 58 59 A53_0: cpu@0 { 60 device_type = "cpu"; 61 compatible = "arm,cortex-a53"; 62 reg = <0x0>; 63 clock-latency = <61036>; 64 clocks = <&clk IMX8MN_CLK_ARM>; 65 enable-method = "psci"; 66 next-level-cache = <&A53_L2>; 67 operating-points-v2 = <&a53_opp_table>; 68 nvmem-cells = <&cpu_speed_grade>; 69 nvmem-cell-names = "speed_grade"; 70 cpu-idle-states = <&cpu_pd_wait>; 71 #cooling-cells = <2>; 72 }; 73 74 A53_1: cpu@1 { 75 device_type = "cpu"; 76 compatible = "arm,cortex-a53"; 77 reg = <0x1>; 78 clock-latency = <61036>; 79 clocks = <&clk IMX8MN_CLK_ARM>; 80 enable-method = "psci"; 81 next-level-cache = <&A53_L2>; 82 operating-points-v2 = <&a53_opp_table>; 83 cpu-idle-states = <&cpu_pd_wait>; 84 #cooling-cells = <2>; 85 }; 86 87 A53_2: cpu@2 { 88 device_type = "cpu"; 89 compatible = "arm,cortex-a53"; 90 reg = <0x2>; 91 clock-latency = <61036>; 92 clocks = <&clk IMX8MN_CLK_ARM>; 93 enable-method = "psci"; 94 next-level-cache = <&A53_L2>; 95 operating-points-v2 = <&a53_opp_table>; 96 cpu-idle-states = <&cpu_pd_wait>; 97 #cooling-cells = <2>; 98 }; 99 100 A53_3: cpu@3 { 101 device_type = "cpu"; 102 compatible = "arm,cortex-a53"; 103 reg = <0x3>; 104 clock-latency = <61036>; 105 clocks = <&clk IMX8MN_CLK_ARM>; 106 enable-method = "psci"; 107 next-level-cache = <&A53_L2>; 108 operating-points-v2 = <&a53_opp_table>; 109 cpu-idle-states = <&cpu_pd_wait>; 110 #cooling-cells = <2>; 111 }; 112 113 A53_L2: l2-cache0 { 114 compatible = "cache"; 115 }; 116 }; 117 118 a53_opp_table: opp-table { 119 compatible = "operating-points-v2"; 120 opp-shared; 121 122 opp-1200000000 { 123 opp-hz = /bits/ 64 <1200000000>; 124 opp-microvolt = <850000>; 125 opp-supported-hw = <0xb00>, <0x7>; 126 clock-latency-ns = <150000>; 127 opp-suspend; 128 }; 129 130 opp-1400000000 { 131 opp-hz = /bits/ 64 <1400000000>; 132 opp-microvolt = <950000>; 133 opp-supported-hw = <0x300>, <0x7>; 134 clock-latency-ns = <150000>; 135 opp-suspend; 136 }; 137 138 opp-1500000000 { 139 opp-hz = /bits/ 64 <1500000000>; 140 opp-microvolt = <1000000>; 141 opp-supported-hw = <0x100>, <0x3>; 142 clock-latency-ns = <150000>; 143 opp-suspend; 144 }; 145 }; 146 147 osc_32k: clock-osc-32k { 148 compatible = "fixed-clock"; 149 #clock-cells = <0>; 150 clock-frequency = <32768>; 151 clock-output-names = "osc_32k"; 152 }; 153 154 osc_24m: clock-osc-24m { 155 compatible = "fixed-clock"; 156 #clock-cells = <0>; 157 clock-frequency = <24000000>; 158 clock-output-names = "osc_24m"; 159 }; 160 161 clk_ext1: clock-ext1 { 162 compatible = "fixed-clock"; 163 #clock-cells = <0>; 164 clock-frequency = <133000000>; 165 clock-output-names = "clk_ext1"; 166 }; 167 168 clk_ext2: clock-ext2 { 169 compatible = "fixed-clock"; 170 #clock-cells = <0>; 171 clock-frequency = <133000000>; 172 clock-output-names = "clk_ext2"; 173 }; 174 175 clk_ext3: clock-ext3 { 176 compatible = "fixed-clock"; 177 #clock-cells = <0>; 178 clock-frequency = <133000000>; 179 clock-output-names = "clk_ext3"; 180 }; 181 182 clk_ext4: clock-ext4 { 183 compatible = "fixed-clock"; 184 #clock-cells = <0>; 185 clock-frequency= <133000000>; 186 clock-output-names = "clk_ext4"; 187 }; 188 189 pmu { 190 compatible = "arm,cortex-a53-pmu"; 191 interrupts = <GIC_PPI 7 192 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; 193 interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>; 194 }; 195 196 psci { 197 compatible = "arm,psci-1.0"; 198 method = "smc"; 199 }; 200 201 thermal-zones { 202 cpu-thermal { 203 polling-delay-passive = <250>; 204 polling-delay = <2000>; 205 thermal-sensors = <&tmu>; 206 trips { 207 cpu_alert0: trip0 { 208 temperature = <85000>; 209 hysteresis = <2000>; 210 type = "passive"; 211 }; 212 213 cpu_crit0: trip1 { 214 temperature = <95000>; 215 hysteresis = <2000>; 216 type = "critical"; 217 }; 218 }; 219 220 cooling-maps { 221 map0 { 222 trip = <&cpu_alert0>; 223 cooling-device = 224 <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 225 <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 226 <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 227 <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 228 }; 229 }; 230 }; 231 }; 232 233 timer { 234 compatible = "arm,armv8-timer"; 235 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 236 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 237 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 238 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; 239 clock-frequency = <8000000>; 240 arm,no-tick-in-suspend; 241 }; 242 243 soc@0 { 244 compatible = "fsl,imx8mn-soc", "simple-bus"; 245 #address-cells = <1>; 246 #size-cells = <1>; 247 ranges = <0x0 0x0 0x0 0x3e000000>; 248 nvmem-cells = <&imx8mn_uid>; 249 nvmem-cell-names = "soc_unique_id"; 250 251 aips1: bus@30000000 { 252 compatible = "fsl,aips-bus", "simple-bus"; 253 reg = <0x30000000 0x400000>; 254 #address-cells = <1>; 255 #size-cells = <1>; 256 ranges; 257 258 spba: bus@30000000 { 259 compatible = "fsl,spba-bus", "simple-bus"; 260 #address-cells = <1>; 261 #size-cells = <1>; 262 reg = <0x30000000 0x100000>; 263 ranges; 264 265 sai2: sai@30020000 { 266 compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; 267 reg = <0x30020000 0x10000>; 268 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; 269 clocks = <&clk IMX8MN_CLK_SAI2_IPG>, 270 <&clk IMX8MN_CLK_DUMMY>, 271 <&clk IMX8MN_CLK_SAI2_ROOT>, 272 <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>; 273 clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; 274 dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>; 275 dma-names = "rx", "tx"; 276 status = "disabled"; 277 }; 278 279 sai3: sai@30030000 { 280 compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; 281 reg = <0x30030000 0x10000>; 282 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; 283 clocks = <&clk IMX8MN_CLK_SAI3_IPG>, 284 <&clk IMX8MN_CLK_DUMMY>, 285 <&clk IMX8MN_CLK_SAI3_ROOT>, 286 <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>; 287 clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; 288 dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>; 289 dma-names = "rx", "tx"; 290 status = "disabled"; 291 }; 292 293 sai5: sai@30050000 { 294 compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; 295 reg = <0x30050000 0x10000>; 296 interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; 297 clocks = <&clk IMX8MN_CLK_SAI5_IPG>, 298 <&clk IMX8MN_CLK_DUMMY>, 299 <&clk IMX8MN_CLK_SAI5_ROOT>, 300 <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>; 301 clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; 302 dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>; 303 dma-names = "rx", "tx"; 304 fsl,shared-interrupt; 305 fsl,dataline = <0 0xf 0xf>; 306 status = "disabled"; 307 }; 308 309 sai6: sai@30060000 { 310 compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; 311 reg = <0x30060000 0x10000>; 312 interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; 313 clocks = <&clk IMX8MN_CLK_SAI6_IPG>, 314 <&clk IMX8MN_CLK_DUMMY>, 315 <&clk IMX8MN_CLK_SAI6_ROOT>, 316 <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>; 317 clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; 318 dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>; 319 dma-names = "rx", "tx"; 320 status = "disabled"; 321 }; 322 323 micfil: audio-controller@30080000 { 324 compatible = "fsl,imx8mm-micfil"; 325 reg = <0x30080000 0x10000>; 326 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, 327 <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, 328 <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, 329 <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; 330 clocks = <&clk IMX8MN_CLK_PDM_IPG>, 331 <&clk IMX8MN_CLK_PDM_ROOT>, 332 <&clk IMX8MN_AUDIO_PLL1_OUT>, 333 <&clk IMX8MN_AUDIO_PLL2_OUT>, 334 <&clk IMX8MN_CLK_EXT3>; 335 clock-names = "ipg_clk", "ipg_clk_app", 336 "pll8k", "pll11k", "clkext3"; 337 dmas = <&sdma2 24 25 0x80000000>; 338 dma-names = "rx"; 339 status = "disabled"; 340 }; 341 342 spdif1: spdif@30090000 { 343 compatible = "fsl,imx35-spdif"; 344 reg = <0x30090000 0x10000>; 345 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; 346 clocks = <&clk IMX8MN_CLK_AUDIO_AHB>, /* core */ 347 <&clk IMX8MN_CLK_24M>, /* rxtx0 */ 348 <&clk IMX8MN_CLK_SPDIF1>, /* rxtx1 */ 349 <&clk IMX8MN_CLK_DUMMY>, /* rxtx2 */ 350 <&clk IMX8MN_CLK_DUMMY>, /* rxtx3 */ 351 <&clk IMX8MN_CLK_DUMMY>, /* rxtx4 */ 352 <&clk IMX8MN_CLK_AUDIO_AHB>, /* rxtx5 */ 353 <&clk IMX8MN_CLK_DUMMY>, /* rxtx6 */ 354 <&clk IMX8MN_CLK_DUMMY>, /* rxtx7 */ 355 <&clk IMX8MN_CLK_DUMMY>; /* spba */ 356 clock-names = "core", "rxtx0", 357 "rxtx1", "rxtx2", 358 "rxtx3", "rxtx4", 359 "rxtx5", "rxtx6", 360 "rxtx7", "spba"; 361 dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>; 362 dma-names = "rx", "tx"; 363 status = "disabled"; 364 }; 365 366 sai7: sai@300b0000 { 367 compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; 368 reg = <0x300b0000 0x10000>; 369 interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; 370 clocks = <&clk IMX8MN_CLK_SAI7_IPG>, 371 <&clk IMX8MN_CLK_DUMMY>, 372 <&clk IMX8MN_CLK_SAI7_ROOT>, 373 <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>; 374 clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; 375 dmas = <&sdma2 12 2 0>, <&sdma2 13 2 0>; 376 dma-names = "rx", "tx"; 377 status = "disabled"; 378 }; 379 380 easrc: easrc@300c0000 { 381 compatible = "fsl,imx8mn-easrc"; 382 reg = <0x300c0000 0x10000>; 383 interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; 384 clocks = <&clk IMX8MN_CLK_ASRC_ROOT>; 385 clock-names = "mem"; 386 dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>, 387 <&sdma2 18 23 0> , <&sdma2 19 23 0>, 388 <&sdma2 20 23 0> , <&sdma2 21 23 0>, 389 <&sdma2 22 23 0> , <&sdma2 23 23 0>; 390 dma-names = "ctx0_rx", "ctx0_tx", 391 "ctx1_rx", "ctx1_tx", 392 "ctx2_rx", "ctx2_tx", 393 "ctx3_rx", "ctx3_tx"; 394 firmware-name = "imx/easrc/easrc-imx8mn.bin"; 395 fsl,asrc-rate = <8000>; 396 fsl,asrc-format = <2>; 397 status = "disabled"; 398 }; 399 }; 400 401 gpio1: gpio@30200000 { 402 compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio"; 403 reg = <0x30200000 0x10000>; 404 interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, 405 <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; 406 clocks = <&clk IMX8MN_CLK_GPIO1_ROOT>; 407 gpio-controller; 408 #gpio-cells = <2>; 409 interrupt-controller; 410 #interrupt-cells = <2>; 411 gpio-ranges = <&iomuxc 0 10 30>; 412 }; 413 414 gpio2: gpio@30210000 { 415 compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio"; 416 reg = <0x30210000 0x10000>; 417 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, 418 <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; 419 clocks = <&clk IMX8MN_CLK_GPIO2_ROOT>; 420 gpio-controller; 421 #gpio-cells = <2>; 422 interrupt-controller; 423 #interrupt-cells = <2>; 424 gpio-ranges = <&iomuxc 0 40 21>; 425 }; 426 427 gpio3: gpio@30220000 { 428 compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio"; 429 reg = <0x30220000 0x10000>; 430 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, 431 <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; 432 clocks = <&clk IMX8MN_CLK_GPIO3_ROOT>; 433 gpio-controller; 434 #gpio-cells = <2>; 435 interrupt-controller; 436 #interrupt-cells = <2>; 437 gpio-ranges = <&iomuxc 0 61 26>; 438 }; 439 440 gpio4: gpio@30230000 { 441 compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio"; 442 reg = <0x30230000 0x10000>; 443 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, 444 <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; 445 clocks = <&clk IMX8MN_CLK_GPIO4_ROOT>; 446 gpio-controller; 447 #gpio-cells = <2>; 448 interrupt-controller; 449 #interrupt-cells = <2>; 450 gpio-ranges = <&iomuxc 21 108 11>; 451 }; 452 453 gpio5: gpio@30240000 { 454 compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio"; 455 reg = <0x30240000 0x10000>; 456 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, 457 <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; 458 clocks = <&clk IMX8MN_CLK_GPIO5_ROOT>; 459 gpio-controller; 460 #gpio-cells = <2>; 461 interrupt-controller; 462 #interrupt-cells = <2>; 463 gpio-ranges = <&iomuxc 0 119 30>; 464 }; 465 466 tmu: tmu@30260000 { 467 compatible = "fsl,imx8mn-tmu", "fsl,imx8mm-tmu"; 468 reg = <0x30260000 0x10000>; 469 clocks = <&clk IMX8MN_CLK_TMU_ROOT>; 470 #thermal-sensor-cells = <0>; 471 }; 472 473 wdog1: watchdog@30280000 { 474 compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt"; 475 reg = <0x30280000 0x10000>; 476 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; 477 clocks = <&clk IMX8MN_CLK_WDOG1_ROOT>; 478 status = "disabled"; 479 }; 480 481 wdog2: watchdog@30290000 { 482 compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt"; 483 reg = <0x30290000 0x10000>; 484 interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; 485 clocks = <&clk IMX8MN_CLK_WDOG2_ROOT>; 486 status = "disabled"; 487 }; 488 489 wdog3: watchdog@302a0000 { 490 compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt"; 491 reg = <0x302a0000 0x10000>; 492 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; 493 clocks = <&clk IMX8MN_CLK_WDOG3_ROOT>; 494 status = "disabled"; 495 }; 496 497 sdma3: dma-controller@302b0000 { 498 compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma"; 499 reg = <0x302b0000 0x10000>; 500 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; 501 clocks = <&clk IMX8MN_CLK_SDMA3_ROOT>, 502 <&clk IMX8MN_CLK_SDMA3_ROOT>; 503 clock-names = "ipg", "ahb"; 504 #dma-cells = <3>; 505 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; 506 }; 507 508 sdma2: dma-controller@302c0000 { 509 compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma"; 510 reg = <0x302c0000 0x10000>; 511 interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; 512 clocks = <&clk IMX8MN_CLK_SDMA2_ROOT>, 513 <&clk IMX8MN_CLK_SDMA2_ROOT>; 514 clock-names = "ipg", "ahb"; 515 #dma-cells = <3>; 516 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; 517 }; 518 519 iomuxc: pinctrl@30330000 { 520 compatible = "fsl,imx8mn-iomuxc"; 521 reg = <0x30330000 0x10000>; 522 }; 523 524 gpr: iomuxc-gpr@30340000 { 525 compatible = "fsl,imx8mn-iomuxc-gpr", "syscon"; 526 reg = <0x30340000 0x10000>; 527 }; 528 529 ocotp: efuse@30350000 { 530 compatible = "fsl,imx8mn-ocotp", "fsl,imx8mm-ocotp", "syscon"; 531 reg = <0x30350000 0x10000>; 532 clocks = <&clk IMX8MN_CLK_OCOTP_ROOT>; 533 #address-cells = <1>; 534 #size-cells = <1>; 535 536 imx8mn_uid: unique-id@410 { 537 reg = <0x4 0x8>; 538 }; 539 540 cpu_speed_grade: speed-grade@10 { 541 reg = <0x10 4>; 542 }; 543 }; 544 545 anatop: anatop@30360000 { 546 compatible = "fsl,imx8mn-anatop", "fsl,imx8mm-anatop", 547 "syscon"; 548 reg = <0x30360000 0x10000>; 549 }; 550 551 snvs: snvs@30370000 { 552 compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd"; 553 reg = <0x30370000 0x10000>; 554 555 snvs_rtc: snvs-rtc-lp { 556 compatible = "fsl,sec-v4.0-mon-rtc-lp"; 557 regmap = <&snvs>; 558 offset = <0x34>; 559 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, 560 <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; 561 clocks = <&clk IMX8MN_CLK_SNVS_ROOT>; 562 clock-names = "snvs-rtc"; 563 }; 564 565 snvs_pwrkey: snvs-powerkey { 566 compatible = "fsl,sec-v4.0-pwrkey"; 567 regmap = <&snvs>; 568 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; 569 clocks = <&clk IMX8MN_CLK_SNVS_ROOT>; 570 clock-names = "snvs-pwrkey"; 571 linux,keycode = <KEY_POWER>; 572 wakeup-source; 573 status = "disabled"; 574 }; 575 }; 576 577 clk: clock-controller@30380000 { 578 compatible = "fsl,imx8mn-ccm"; 579 reg = <0x30380000 0x10000>; 580 #clock-cells = <1>; 581 clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, 582 <&clk_ext3>, <&clk_ext4>; 583 clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", 584 "clk_ext3", "clk_ext4"; 585 assigned-clocks = <&clk IMX8MN_CLK_A53_SRC>, 586 <&clk IMX8MN_CLK_A53_CORE>, 587 <&clk IMX8MN_CLK_NOC>, 588 <&clk IMX8MN_CLK_AUDIO_AHB>, 589 <&clk IMX8MN_CLK_IPG_AUDIO_ROOT>, 590 <&clk IMX8MN_SYS_PLL3>, 591 <&clk IMX8MN_AUDIO_PLL1>, 592 <&clk IMX8MN_AUDIO_PLL2>; 593 assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_800M>, 594 <&clk IMX8MN_ARM_PLL_OUT>, 595 <&clk IMX8MN_SYS_PLL3_OUT>, 596 <&clk IMX8MN_SYS_PLL1_800M>; 597 assigned-clock-rates = <0>, <0>, <0>, 598 <400000000>, 599 <400000000>, 600 <600000000>, 601 <393216000>, 602 <361267200>; 603 }; 604 605 src: reset-controller@30390000 { 606 compatible = "fsl,imx8mn-src", "fsl,imx8mq-src", "syscon"; 607 reg = <0x30390000 0x10000>; 608 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; 609 #reset-cells = <1>; 610 }; 611 }; 612 613 aips2: bus@30400000 { 614 compatible = "fsl,aips-bus", "simple-bus"; 615 reg = <0x30400000 0x400000>; 616 #address-cells = <1>; 617 #size-cells = <1>; 618 ranges; 619 620 pwm1: pwm@30660000 { 621 compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm"; 622 reg = <0x30660000 0x10000>; 623 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; 624 clocks = <&clk IMX8MN_CLK_PWM1_ROOT>, 625 <&clk IMX8MN_CLK_PWM1_ROOT>; 626 clock-names = "ipg", "per"; 627 #pwm-cells = <2>; 628 status = "disabled"; 629 }; 630 631 pwm2: pwm@30670000 { 632 compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm"; 633 reg = <0x30670000 0x10000>; 634 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; 635 clocks = <&clk IMX8MN_CLK_PWM2_ROOT>, 636 <&clk IMX8MN_CLK_PWM2_ROOT>; 637 clock-names = "ipg", "per"; 638 #pwm-cells = <2>; 639 status = "disabled"; 640 }; 641 642 pwm3: pwm@30680000 { 643 compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm"; 644 reg = <0x30680000 0x10000>; 645 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; 646 clocks = <&clk IMX8MN_CLK_PWM3_ROOT>, 647 <&clk IMX8MN_CLK_PWM3_ROOT>; 648 clock-names = "ipg", "per"; 649 #pwm-cells = <2>; 650 status = "disabled"; 651 }; 652 653 pwm4: pwm@30690000 { 654 compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm"; 655 reg = <0x30690000 0x10000>; 656 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; 657 clocks = <&clk IMX8MN_CLK_PWM4_ROOT>, 658 <&clk IMX8MN_CLK_PWM4_ROOT>; 659 clock-names = "ipg", "per"; 660 #pwm-cells = <2>; 661 status = "disabled"; 662 }; 663 664 system_counter: timer@306a0000 { 665 compatible = "nxp,sysctr-timer"; 666 reg = <0x306a0000 0x20000>; 667 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; 668 clocks = <&osc_24m>; 669 clock-names = "per"; 670 }; 671 }; 672 673 aips3: bus@30800000 { 674 compatible = "fsl,aips-bus", "simple-bus"; 675 reg = <0x30800000 0x400000>; 676 #address-cells = <1>; 677 #size-cells = <1>; 678 ranges; 679 680 ecspi1: spi@30820000 { 681 compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; 682 #address-cells = <1>; 683 #size-cells = <0>; 684 reg = <0x30820000 0x10000>; 685 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; 686 clocks = <&clk IMX8MN_CLK_ECSPI1_ROOT>, 687 <&clk IMX8MN_CLK_ECSPI1_ROOT>; 688 clock-names = "ipg", "per"; 689 dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; 690 dma-names = "rx", "tx"; 691 status = "disabled"; 692 }; 693 694 ecspi2: spi@30830000 { 695 compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; 696 #address-cells = <1>; 697 #size-cells = <0>; 698 reg = <0x30830000 0x10000>; 699 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; 700 clocks = <&clk IMX8MN_CLK_ECSPI2_ROOT>, 701 <&clk IMX8MN_CLK_ECSPI2_ROOT>; 702 clock-names = "ipg", "per"; 703 dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; 704 dma-names = "rx", "tx"; 705 status = "disabled"; 706 }; 707 708 ecspi3: spi@30840000 { 709 compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; 710 #address-cells = <1>; 711 #size-cells = <0>; 712 reg = <0x30840000 0x10000>; 713 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; 714 clocks = <&clk IMX8MN_CLK_ECSPI3_ROOT>, 715 <&clk IMX8MN_CLK_ECSPI3_ROOT>; 716 clock-names = "ipg", "per"; 717 dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; 718 dma-names = "rx", "tx"; 719 status = "disabled"; 720 }; 721 722 uart1: serial@30860000 { 723 compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; 724 reg = <0x30860000 0x10000>; 725 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; 726 clocks = <&clk IMX8MN_CLK_UART1_ROOT>, 727 <&clk IMX8MN_CLK_UART1_ROOT>; 728 clock-names = "ipg", "per"; 729 dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; 730 dma-names = "rx", "tx"; 731 status = "disabled"; 732 }; 733 734 uart3: serial@30880000 { 735 compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; 736 reg = <0x30880000 0x10000>; 737 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; 738 clocks = <&clk IMX8MN_CLK_UART3_ROOT>, 739 <&clk IMX8MN_CLK_UART3_ROOT>; 740 clock-names = "ipg", "per"; 741 dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; 742 dma-names = "rx", "tx"; 743 status = "disabled"; 744 }; 745 746 uart2: serial@30890000 { 747 compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; 748 reg = <0x30890000 0x10000>; 749 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; 750 clocks = <&clk IMX8MN_CLK_UART2_ROOT>, 751 <&clk IMX8MN_CLK_UART2_ROOT>; 752 clock-names = "ipg", "per"; 753 status = "disabled"; 754 }; 755 756 crypto: crypto@30900000 { 757 compatible = "fsl,sec-v4.0"; 758 #address-cells = <1>; 759 #size-cells = <1>; 760 reg = <0x30900000 0x40000>; 761 ranges = <0 0x30900000 0x40000>; 762 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; 763 clocks = <&clk IMX8MN_CLK_AHB>, 764 <&clk IMX8MN_CLK_IPG_ROOT>; 765 clock-names = "aclk", "ipg"; 766 767 sec_jr0: jr@1000 { 768 compatible = "fsl,sec-v4.0-job-ring"; 769 reg = <0x1000 0x1000>; 770 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; 771 }; 772 773 sec_jr1: jr@2000 { 774 compatible = "fsl,sec-v4.0-job-ring"; 775 reg = <0x2000 0x1000>; 776 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; 777 }; 778 779 sec_jr2: jr@3000 { 780 compatible = "fsl,sec-v4.0-job-ring"; 781 reg = <0x3000 0x1000>; 782 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; 783 }; 784 }; 785 786 i2c1: i2c@30a20000 { 787 compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c"; 788 #address-cells = <1>; 789 #size-cells = <0>; 790 reg = <0x30a20000 0x10000>; 791 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; 792 clocks = <&clk IMX8MN_CLK_I2C1_ROOT>; 793 status = "disabled"; 794 }; 795 796 i2c2: i2c@30a30000 { 797 compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c"; 798 #address-cells = <1>; 799 #size-cells = <0>; 800 reg = <0x30a30000 0x10000>; 801 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; 802 clocks = <&clk IMX8MN_CLK_I2C2_ROOT>; 803 status = "disabled"; 804 }; 805 806 i2c3: i2c@30a40000 { 807 #address-cells = <1>; 808 #size-cells = <0>; 809 compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c"; 810 reg = <0x30a40000 0x10000>; 811 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; 812 clocks = <&clk IMX8MN_CLK_I2C3_ROOT>; 813 status = "disabled"; 814 }; 815 816 i2c4: i2c@30a50000 { 817 compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c"; 818 #address-cells = <1>; 819 #size-cells = <0>; 820 reg = <0x30a50000 0x10000>; 821 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; 822 clocks = <&clk IMX8MN_CLK_I2C4_ROOT>; 823 status = "disabled"; 824 }; 825 826 uart4: serial@30a60000 { 827 compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; 828 reg = <0x30a60000 0x10000>; 829 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; 830 clocks = <&clk IMX8MN_CLK_UART4_ROOT>, 831 <&clk IMX8MN_CLK_UART4_ROOT>; 832 clock-names = "ipg", "per"; 833 dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>; 834 dma-names = "rx", "tx"; 835 status = "disabled"; 836 }; 837 838 mu: mailbox@30aa0000 { 839 compatible = "fsl,imx8mn-mu", "fsl,imx6sx-mu"; 840 reg = <0x30aa0000 0x10000>; 841 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; 842 clocks = <&clk IMX8MN_CLK_MU_ROOT>; 843 #mbox-cells = <2>; 844 }; 845 846 usdhc1: mmc@30b40000 { 847 compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc"; 848 reg = <0x30b40000 0x10000>; 849 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; 850 clocks = <&clk IMX8MN_CLK_IPG_ROOT>, 851 <&clk IMX8MN_CLK_NAND_USDHC_BUS>, 852 <&clk IMX8MN_CLK_USDHC1_ROOT>; 853 clock-names = "ipg", "ahb", "per"; 854 fsl,tuning-start-tap = <20>; 855 fsl,tuning-step= <2>; 856 bus-width = <4>; 857 status = "disabled"; 858 }; 859 860 usdhc2: mmc@30b50000 { 861 compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc"; 862 reg = <0x30b50000 0x10000>; 863 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; 864 clocks = <&clk IMX8MN_CLK_IPG_ROOT>, 865 <&clk IMX8MN_CLK_NAND_USDHC_BUS>, 866 <&clk IMX8MN_CLK_USDHC2_ROOT>; 867 clock-names = "ipg", "ahb", "per"; 868 fsl,tuning-start-tap = <20>; 869 fsl,tuning-step= <2>; 870 bus-width = <4>; 871 status = "disabled"; 872 }; 873 874 usdhc3: mmc@30b60000 { 875 compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc"; 876 reg = <0x30b60000 0x10000>; 877 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; 878 clocks = <&clk IMX8MN_CLK_IPG_ROOT>, 879 <&clk IMX8MN_CLK_NAND_USDHC_BUS>, 880 <&clk IMX8MN_CLK_USDHC3_ROOT>; 881 clock-names = "ipg", "ahb", "per"; 882 fsl,tuning-start-tap = <20>; 883 fsl,tuning-step= <2>; 884 bus-width = <4>; 885 status = "disabled"; 886 }; 887 888 sdma1: dma-controller@30bd0000 { 889 compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma"; 890 reg = <0x30bd0000 0x10000>; 891 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; 892 clocks = <&clk IMX8MN_CLK_SDMA1_ROOT>, 893 <&clk IMX8MN_CLK_AHB>; 894 clock-names = "ipg", "ahb"; 895 #dma-cells = <3>; 896 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; 897 }; 898 899 fec1: ethernet@30be0000 { 900 compatible = "fsl,imx8mn-fec", "fsl,imx6sx-fec"; 901 reg = <0x30be0000 0x10000>; 902 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, 903 <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, 904 <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, 905 <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; 906 clocks = <&clk IMX8MN_CLK_ENET1_ROOT>, 907 <&clk IMX8MN_CLK_ENET1_ROOT>, 908 <&clk IMX8MN_CLK_ENET_TIMER>, 909 <&clk IMX8MN_CLK_ENET_REF>, 910 <&clk IMX8MN_CLK_ENET_PHY_REF>; 911 clock-names = "ipg", "ahb", "ptp", 912 "enet_clk_ref", "enet_out"; 913 assigned-clocks = <&clk IMX8MN_CLK_ENET_AXI>, 914 <&clk IMX8MN_CLK_ENET_TIMER>, 915 <&clk IMX8MN_CLK_ENET_REF>, 916 <&clk IMX8MN_CLK_ENET_PHY_REF>; 917 assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>, 918 <&clk IMX8MN_SYS_PLL2_100M>, 919 <&clk IMX8MN_SYS_PLL2_125M>, 920 <&clk IMX8MN_SYS_PLL2_50M>; 921 assigned-clock-rates = <0>, <100000000>, <125000000>, <0>; 922 fsl,num-tx-queues = <3>; 923 fsl,num-rx-queues = <3>; 924 status = "disabled"; 925 }; 926 927 }; 928 929 aips4: bus@32c00000 { 930 compatible = "fsl,aips-bus", "simple-bus"; 931 reg = <0x32c00000 0x400000>; 932 #address-cells = <1>; 933 #size-cells = <1>; 934 ranges; 935 936 usbotg1: usb@32e40000 { 937 compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb"; 938 reg = <0x32e40000 0x200>; 939 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; 940 clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>; 941 clock-names = "usb1_ctrl_root_clk"; 942 assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>; 943 assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>; 944 fsl,usbphy = <&usbphynop1>; 945 fsl,usbmisc = <&usbmisc1 0>; 946 status = "disabled"; 947 }; 948 949 usbmisc1: usbmisc@32e40200 { 950 compatible = "fsl,imx8mn-usbmisc", "fsl,imx7d-usbmisc"; 951 #index-cells = <1>; 952 reg = <0x32e40200 0x200>; 953 }; 954 }; 955 956 dma_apbh: dma-controller@33000000 { 957 compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh"; 958 reg = <0x33000000 0x2000>; 959 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, 960 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, 961 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, 962 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; 963 interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; 964 #dma-cells = <1>; 965 dma-channels = <4>; 966 clocks = <&clk IMX8MN_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; 967 }; 968 969 gpmi: nand-controller@33002000 { 970 compatible = "fsl,imx8mn-gpmi-nand", "fsl,imx7d-gpmi-nand"; 971 #address-cells = <1>; 972 #size-cells = <1>; 973 reg = <0x33002000 0x2000>, <0x33004000 0x4000>; 974 reg-names = "gpmi-nand", "bch"; 975 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; 976 interrupt-names = "bch"; 977 clocks = <&clk IMX8MN_CLK_NAND_ROOT>, 978 <&clk IMX8MN_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; 979 clock-names = "gpmi_io", "gpmi_bch_apb"; 980 dmas = <&dma_apbh 0>; 981 dma-names = "rx-tx"; 982 status = "disabled"; 983 }; 984 985 gic: interrupt-controller@38800000 { 986 compatible = "arm,gic-v3"; 987 reg = <0x38800000 0x10000>, 988 <0x38880000 0xc0000>; 989 #interrupt-cells = <3>; 990 interrupt-controller; 991 interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; 992 }; 993 994 ddrc: memory-controller@3d400000 { 995 compatible = "fsl,imx8mn-ddrc", "fsl,imx8m-ddrc"; 996 reg = <0x3d400000 0x400000>; 997 clock-names = "core", "pll", "alt", "apb"; 998 clocks = <&clk IMX8MN_CLK_DRAM_CORE>, 999 <&clk IMX8MN_DRAM_PLL>, 1000 <&clk IMX8MN_CLK_DRAM_ALT>, 1001 <&clk IMX8MN_CLK_DRAM_APB>; 1002 }; 1003 1004 ddr-pmu@3d800000 { 1005 compatible = "fsl,imx8mn-ddr-pmu", "fsl,imx8m-ddr-pmu"; 1006 reg = <0x3d800000 0x400000>; 1007 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; 1008 }; 1009 }; 1010 1011 usbphynop1: usbphynop1 { 1012 compatible = "usb-nop-xceiv"; 1013 clocks = <&clk IMX8MN_CLK_USB_PHY_REF>; 1014 assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>; 1015 assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>; 1016 clock-names = "main_clk"; 1017 }; 1018}; 1019