1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Device Tree Include file for NXP Layerscape-1028A family SoC. 4 * 5 * Copyright 2018-2020 NXP 6 * 7 * Harninder Rai <harninder.rai@nxp.com> 8 * 9 */ 10 11#include <dt-bindings/clock/fsl,qoriq-clockgen.h> 12#include <dt-bindings/interrupt-controller/arm-gic.h> 13#include <dt-bindings/thermal/thermal.h> 14 15/ { 16 compatible = "fsl,ls1028a"; 17 interrupt-parent = <&gic>; 18 #address-cells = <2>; 19 #size-cells = <2>; 20 21 cpus { 22 #address-cells = <1>; 23 #size-cells = <0>; 24 25 cpu0: cpu@0 { 26 device_type = "cpu"; 27 compatible = "arm,cortex-a72"; 28 reg = <0x0>; 29 enable-method = "psci"; 30 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 31 next-level-cache = <&l2>; 32 cpu-idle-states = <&CPU_PW20>; 33 #cooling-cells = <2>; 34 }; 35 36 cpu1: cpu@1 { 37 device_type = "cpu"; 38 compatible = "arm,cortex-a72"; 39 reg = <0x1>; 40 enable-method = "psci"; 41 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 42 next-level-cache = <&l2>; 43 cpu-idle-states = <&CPU_PW20>; 44 #cooling-cells = <2>; 45 }; 46 47 l2: l2-cache { 48 compatible = "cache"; 49 }; 50 }; 51 52 idle-states { 53 /* 54 * PSCI node is not added default, U-boot will add missing 55 * parts if it determines to use PSCI. 56 */ 57 entry-method = "psci"; 58 59 CPU_PW20: cpu-pw20 { 60 compatible = "arm,idle-state"; 61 idle-state-name = "PW20"; 62 arm,psci-suspend-param = <0x0>; 63 entry-latency-us = <2000>; 64 exit-latency-us = <2000>; 65 min-residency-us = <6000>; 66 }; 67 }; 68 69 sysclk: sysclk { 70 compatible = "fixed-clock"; 71 #clock-cells = <0>; 72 clock-frequency = <100000000>; 73 clock-output-names = "sysclk"; 74 }; 75 76 osc_27m: clock-osc-27m { 77 compatible = "fixed-clock"; 78 #clock-cells = <0>; 79 clock-frequency = <27000000>; 80 clock-output-names = "phy_27m"; 81 }; 82 83 dpclk: clock-controller@f1f0000 { 84 compatible = "fsl,ls1028a-plldig"; 85 reg = <0x0 0xf1f0000 0x0 0xffff>; 86 #clock-cells = <0>; 87 clocks = <&osc_27m>; 88 }; 89 90 firmware { 91 optee: optee { 92 compatible = "linaro,optee-tz"; 93 method = "smc"; 94 status = "disabled"; 95 }; 96 }; 97 98 reboot { 99 compatible ="syscon-reboot"; 100 regmap = <&rst>; 101 offset = <0>; 102 mask = <0x02>; 103 }; 104 105 timer { 106 compatible = "arm,armv8-timer"; 107 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | 108 IRQ_TYPE_LEVEL_LOW)>, 109 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | 110 IRQ_TYPE_LEVEL_LOW)>, 111 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | 112 IRQ_TYPE_LEVEL_LOW)>, 113 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | 114 IRQ_TYPE_LEVEL_LOW)>; 115 }; 116 117 pmu { 118 compatible = "arm,cortex-a72-pmu"; 119 interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; 120 }; 121 122 gic: interrupt-controller@6000000 { 123 compatible= "arm,gic-v3"; 124 #address-cells = <2>; 125 #size-cells = <2>; 126 ranges; 127 reg= <0x0 0x06000000 0 0x10000>, /* GIC Dist */ 128 <0x0 0x06040000 0 0x40000>; /* GIC Redistributor */ 129 #interrupt-cells= <3>; 130 interrupt-controller; 131 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) | 132 IRQ_TYPE_LEVEL_LOW)>; 133 its: gic-its@6020000 { 134 compatible = "arm,gic-v3-its"; 135 msi-controller; 136 reg = <0x0 0x06020000 0 0x20000>;/* GIC Translater */ 137 }; 138 }; 139 140 thermal-zones { 141 ddr-controller { 142 polling-delay-passive = <1000>; 143 polling-delay = <5000>; 144 thermal-sensors = <&tmu 0>; 145 146 trips { 147 ddr-ctrler-alert { 148 temperature = <85000>; 149 hysteresis = <2000>; 150 type = "passive"; 151 }; 152 153 ddr-ctrler-crit { 154 temperature = <95000>; 155 hysteresis = <2000>; 156 type = "critical"; 157 }; 158 }; 159 }; 160 161 core-cluster { 162 polling-delay-passive = <1000>; 163 polling-delay = <5000>; 164 thermal-sensors = <&tmu 1>; 165 166 trips { 167 core_cluster_alert: core-cluster-alert { 168 temperature = <85000>; 169 hysteresis = <2000>; 170 type = "passive"; 171 }; 172 173 core_cluster_crit: core-cluster-crit { 174 temperature = <95000>; 175 hysteresis = <2000>; 176 type = "critical"; 177 }; 178 }; 179 180 cooling-maps { 181 map0 { 182 trip = <&core_cluster_alert>; 183 cooling-device = 184 <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 185 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 186 }; 187 }; 188 }; 189 }; 190 191 soc: soc { 192 compatible = "simple-bus"; 193 #address-cells = <2>; 194 #size-cells = <2>; 195 ranges; 196 197 ddr: memory-controller@1080000 { 198 compatible = "fsl,qoriq-memory-controller"; 199 reg = <0x0 0x1080000 0x0 0x1000>; 200 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; 201 little-endian; 202 }; 203 204 dcfg: syscon@1e00000 { 205 #address-cells = <1>; 206 #size-cells = <1>; 207 compatible = "fsl,ls1028a-dcfg", "syscon", "simple-mfd"; 208 reg = <0x0 0x1e00000 0x0 0x10000>; 209 ranges = <0x0 0x0 0x1e00000 0x10000>; 210 little-endian; 211 212 fspi_clk: clock-controller@900 { 213 compatible = "fsl,ls1028a-flexspi-clk"; 214 reg = <0x900 0x4>; 215 #clock-cells = <0>; 216 clocks = <&clockgen QORIQ_CLK_HWACCEL 0>; 217 clock-output-names = "fspi_clk"; 218 }; 219 }; 220 221 rst: syscon@1e60000 { 222 compatible = "syscon"; 223 reg = <0x0 0x1e60000 0x0 0x10000>; 224 little-endian; 225 }; 226 227 scfg: syscon@1fc0000 { 228 compatible = "fsl,ls1028a-scfg", "syscon"; 229 reg = <0x0 0x1fc0000 0x0 0x10000>; 230 big-endian; 231 }; 232 233 clockgen: clock-controller@1300000 { 234 compatible = "fsl,ls1028a-clockgen"; 235 reg = <0x0 0x1300000 0x0 0xa0000>; 236 #clock-cells = <2>; 237 clocks = <&sysclk>; 238 }; 239 240 i2c0: i2c@2000000 { 241 compatible = "fsl,vf610-i2c"; 242 #address-cells = <1>; 243 #size-cells = <0>; 244 reg = <0x0 0x2000000 0x0 0x10000>; 245 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; 246 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 247 QORIQ_CLK_PLL_DIV(4)>; 248 status = "disabled"; 249 }; 250 251 i2c1: i2c@2010000 { 252 compatible = "fsl,vf610-i2c"; 253 #address-cells = <1>; 254 #size-cells = <0>; 255 reg = <0x0 0x2010000 0x0 0x10000>; 256 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; 257 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 258 QORIQ_CLK_PLL_DIV(4)>; 259 status = "disabled"; 260 }; 261 262 i2c2: i2c@2020000 { 263 compatible = "fsl,vf610-i2c"; 264 #address-cells = <1>; 265 #size-cells = <0>; 266 reg = <0x0 0x2020000 0x0 0x10000>; 267 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; 268 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 269 QORIQ_CLK_PLL_DIV(4)>; 270 status = "disabled"; 271 }; 272 273 i2c3: i2c@2030000 { 274 compatible = "fsl,vf610-i2c"; 275 #address-cells = <1>; 276 #size-cells = <0>; 277 reg = <0x0 0x2030000 0x0 0x10000>; 278 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; 279 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 280 QORIQ_CLK_PLL_DIV(4)>; 281 status = "disabled"; 282 }; 283 284 i2c4: i2c@2040000 { 285 compatible = "fsl,vf610-i2c"; 286 #address-cells = <1>; 287 #size-cells = <0>; 288 reg = <0x0 0x2040000 0x0 0x10000>; 289 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; 290 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 291 QORIQ_CLK_PLL_DIV(4)>; 292 status = "disabled"; 293 }; 294 295 i2c5: i2c@2050000 { 296 compatible = "fsl,vf610-i2c"; 297 #address-cells = <1>; 298 #size-cells = <0>; 299 reg = <0x0 0x2050000 0x0 0x10000>; 300 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; 301 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 302 QORIQ_CLK_PLL_DIV(4)>; 303 status = "disabled"; 304 }; 305 306 i2c6: i2c@2060000 { 307 compatible = "fsl,vf610-i2c"; 308 #address-cells = <1>; 309 #size-cells = <0>; 310 reg = <0x0 0x2060000 0x0 0x10000>; 311 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; 312 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 313 QORIQ_CLK_PLL_DIV(4)>; 314 status = "disabled"; 315 }; 316 317 i2c7: i2c@2070000 { 318 compatible = "fsl,vf610-i2c"; 319 #address-cells = <1>; 320 #size-cells = <0>; 321 reg = <0x0 0x2070000 0x0 0x10000>; 322 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; 323 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 324 QORIQ_CLK_PLL_DIV(4)>; 325 status = "disabled"; 326 }; 327 328 fspi: spi@20c0000 { 329 compatible = "nxp,lx2160a-fspi"; 330 #address-cells = <1>; 331 #size-cells = <0>; 332 reg = <0x0 0x20c0000 0x0 0x10000>, 333 <0x0 0x20000000 0x0 0x10000000>; 334 reg-names = "fspi_base", "fspi_mmap"; 335 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; 336 clocks = <&fspi_clk>, <&fspi_clk>; 337 clock-names = "fspi_en", "fspi"; 338 status = "disabled"; 339 }; 340 341 dspi0: spi@2100000 { 342 compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi"; 343 #address-cells = <1>; 344 #size-cells = <0>; 345 reg = <0x0 0x2100000 0x0 0x10000>; 346 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; 347 clock-names = "dspi"; 348 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 349 QORIQ_CLK_PLL_DIV(2)>; 350 dmas = <&edma0 0 62>, <&edma0 0 60>; 351 dma-names = "tx", "rx"; 352 spi-num-chipselects = <4>; 353 little-endian; 354 status = "disabled"; 355 }; 356 357 dspi1: spi@2110000 { 358 compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi"; 359 #address-cells = <1>; 360 #size-cells = <0>; 361 reg = <0x0 0x2110000 0x0 0x10000>; 362 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; 363 clock-names = "dspi"; 364 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 365 QORIQ_CLK_PLL_DIV(2)>; 366 dmas = <&edma0 0 58>, <&edma0 0 56>; 367 dma-names = "tx", "rx"; 368 spi-num-chipselects = <4>; 369 little-endian; 370 status = "disabled"; 371 }; 372 373 dspi2: spi@2120000 { 374 compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi"; 375 #address-cells = <1>; 376 #size-cells = <0>; 377 reg = <0x0 0x2120000 0x0 0x10000>; 378 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; 379 clock-names = "dspi"; 380 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 381 QORIQ_CLK_PLL_DIV(2)>; 382 dmas = <&edma0 0 54>, <&edma0 0 2>; 383 dma-names = "tx", "rx"; 384 spi-num-chipselects = <3>; 385 little-endian; 386 status = "disabled"; 387 }; 388 389 esdhc: mmc@2140000 { 390 compatible = "fsl,ls1028a-esdhc", "fsl,esdhc"; 391 reg = <0x0 0x2140000 0x0 0x10000>; 392 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; 393 clock-frequency = <0>; /* fixed up by bootloader */ 394 clocks = <&clockgen QORIQ_CLK_HWACCEL 1>; 395 voltage-ranges = <1800 1800 3300 3300>; 396 sdhci,auto-cmd12; 397 little-endian; 398 bus-width = <4>; 399 status = "disabled"; 400 }; 401 402 esdhc1: mmc@2150000 { 403 compatible = "fsl,ls1028a-esdhc", "fsl,esdhc"; 404 reg = <0x0 0x2150000 0x0 0x10000>; 405 interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; 406 clock-frequency = <0>; /* fixed up by bootloader */ 407 clocks = <&clockgen QORIQ_CLK_HWACCEL 1>; 408 voltage-ranges = <1800 1800 3300 3300>; 409 sdhci,auto-cmd12; 410 broken-cd; 411 little-endian; 412 bus-width = <4>; 413 status = "disabled"; 414 }; 415 416 can0: can@2180000 { 417 compatible = "fsl,lx2160ar1-flexcan"; 418 reg = <0x0 0x2180000 0x0 0x10000>; 419 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; 420 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 421 QORIQ_CLK_PLL_DIV(2)>, 422 <&clockgen QORIQ_CLK_PLATFORM_PLL 423 QORIQ_CLK_PLL_DIV(2)>; 424 clock-names = "ipg", "per"; 425 status = "disabled"; 426 }; 427 428 can1: can@2190000 { 429 compatible = "fsl,lx2160ar1-flexcan"; 430 reg = <0x0 0x2190000 0x0 0x10000>; 431 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; 432 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 433 QORIQ_CLK_PLL_DIV(2)>, 434 <&clockgen QORIQ_CLK_PLATFORM_PLL 435 QORIQ_CLK_PLL_DIV(2)>; 436 clock-names = "ipg", "per"; 437 status = "disabled"; 438 }; 439 440 duart0: serial@21c0500 { 441 compatible = "fsl,ns16550", "ns16550a"; 442 reg = <0x00 0x21c0500 0x0 0x100>; 443 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; 444 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 445 QORIQ_CLK_PLL_DIV(2)>; 446 status = "disabled"; 447 }; 448 449 duart1: serial@21c0600 { 450 compatible = "fsl,ns16550", "ns16550a"; 451 reg = <0x00 0x21c0600 0x0 0x100>; 452 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; 453 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 454 QORIQ_CLK_PLL_DIV(2)>; 455 status = "disabled"; 456 }; 457 458 459 lpuart0: serial@2260000 { 460 compatible = "fsl,ls1028a-lpuart"; 461 reg = <0x0 0x2260000 0x0 0x1000>; 462 interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; 463 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 464 QORIQ_CLK_PLL_DIV(2)>; 465 clock-names = "ipg"; 466 dma-names = "rx","tx"; 467 dmas = <&edma0 1 32>, 468 <&edma0 1 33>; 469 status = "disabled"; 470 }; 471 472 lpuart1: serial@2270000 { 473 compatible = "fsl,ls1028a-lpuart"; 474 reg = <0x0 0x2270000 0x0 0x1000>; 475 interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; 476 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 477 QORIQ_CLK_PLL_DIV(2)>; 478 clock-names = "ipg"; 479 dma-names = "rx","tx"; 480 dmas = <&edma0 1 30>, 481 <&edma0 1 31>; 482 status = "disabled"; 483 }; 484 485 lpuart2: serial@2280000 { 486 compatible = "fsl,ls1028a-lpuart"; 487 reg = <0x0 0x2280000 0x0 0x1000>; 488 interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; 489 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 490 QORIQ_CLK_PLL_DIV(2)>; 491 clock-names = "ipg"; 492 dma-names = "rx","tx"; 493 dmas = <&edma0 1 28>, 494 <&edma0 1 29>; 495 status = "disabled"; 496 }; 497 498 lpuart3: serial@2290000 { 499 compatible = "fsl,ls1028a-lpuart"; 500 reg = <0x0 0x2290000 0x0 0x1000>; 501 interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; 502 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 503 QORIQ_CLK_PLL_DIV(2)>; 504 clock-names = "ipg"; 505 dma-names = "rx","tx"; 506 dmas = <&edma0 1 26>, 507 <&edma0 1 27>; 508 status = "disabled"; 509 }; 510 511 lpuart4: serial@22a0000 { 512 compatible = "fsl,ls1028a-lpuart"; 513 reg = <0x0 0x22a0000 0x0 0x1000>; 514 interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>; 515 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 516 QORIQ_CLK_PLL_DIV(2)>; 517 clock-names = "ipg"; 518 dma-names = "rx","tx"; 519 dmas = <&edma0 1 24>, 520 <&edma0 1 25>; 521 status = "disabled"; 522 }; 523 524 lpuart5: serial@22b0000 { 525 compatible = "fsl,ls1028a-lpuart"; 526 reg = <0x0 0x22b0000 0x0 0x1000>; 527 interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>; 528 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 529 QORIQ_CLK_PLL_DIV(2)>; 530 clock-names = "ipg"; 531 dma-names = "rx","tx"; 532 dmas = <&edma0 1 22>, 533 <&edma0 1 23>; 534 status = "disabled"; 535 }; 536 537 edma0: dma-controller@22c0000 { 538 #dma-cells = <2>; 539 compatible = "fsl,ls1028a-edma", "fsl,vf610-edma"; 540 reg = <0x0 0x22c0000 0x0 0x10000>, 541 <0x0 0x22d0000 0x0 0x10000>, 542 <0x0 0x22e0000 0x0 0x10000>; 543 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, 544 <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; 545 interrupt-names = "edma-tx", "edma-err"; 546 dma-channels = <32>; 547 clock-names = "dmamux0", "dmamux1"; 548 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 549 QORIQ_CLK_PLL_DIV(2)>, 550 <&clockgen QORIQ_CLK_PLATFORM_PLL 551 QORIQ_CLK_PLL_DIV(2)>; 552 }; 553 554 gpio1: gpio@2300000 { 555 compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio"; 556 reg = <0x0 0x2300000 0x0 0x10000>; 557 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; 558 gpio-controller; 559 #gpio-cells = <2>; 560 interrupt-controller; 561 #interrupt-cells = <2>; 562 little-endian; 563 }; 564 565 gpio2: gpio@2310000 { 566 compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio"; 567 reg = <0x0 0x2310000 0x0 0x10000>; 568 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; 569 gpio-controller; 570 #gpio-cells = <2>; 571 interrupt-controller; 572 #interrupt-cells = <2>; 573 little-endian; 574 }; 575 576 gpio3: gpio@2320000 { 577 compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio"; 578 reg = <0x0 0x2320000 0x0 0x10000>; 579 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; 580 gpio-controller; 581 #gpio-cells = <2>; 582 interrupt-controller; 583 #interrupt-cells = <2>; 584 little-endian; 585 }; 586 587 usb0: usb@3100000 { 588 compatible = "fsl,ls1028a-dwc3", "snps,dwc3"; 589 reg = <0x0 0x3100000 0x0 0x10000>; 590 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; 591 dr_mode = "host"; 592 snps,dis_rxdet_inp3_quirk; 593 snps,quirk-frame-length-adjustment = <0x20>; 594 snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; 595 }; 596 597 usb1: usb@3110000 { 598 compatible = "fsl,ls1028a-dwc3", "snps,dwc3"; 599 reg = <0x0 0x3110000 0x0 0x10000>; 600 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; 601 dr_mode = "host"; 602 snps,dis_rxdet_inp3_quirk; 603 snps,quirk-frame-length-adjustment = <0x20>; 604 snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; 605 }; 606 607 sata: sata@3200000 { 608 compatible = "fsl,ls1028a-ahci"; 609 reg = <0x0 0x3200000 0x0 0x10000>, 610 <0x7 0x100520 0x0 0x4>; 611 reg-names = "ahci", "sata-ecc"; 612 interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; 613 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 614 QORIQ_CLK_PLL_DIV(2)>; 615 status = "disabled"; 616 }; 617 618 pcie1: pcie@3400000 { 619 compatible = "fsl,ls1028a-pcie"; 620 reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ 621 <0x80 0x00000000 0x0 0x00002000>; /* configuration space */ 622 reg-names = "regs", "config"; 623 interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ 624 <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ 625 interrupt-names = "pme", "aer"; 626 #address-cells = <3>; 627 #size-cells = <2>; 628 device_type = "pci"; 629 dma-coherent; 630 num-viewport = <8>; 631 bus-range = <0x0 0xff>; 632 ranges = <0x81000000 0x0 0x00000000 0x80 0x00010000 0x0 0x00010000 /* downstream I/O */ 633 0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ 634 msi-parent = <&its>; 635 #interrupt-cells = <1>; 636 interrupt-map-mask = <0 0 0 7>; 637 interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, 638 <0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, 639 <0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, 640 <0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; 641 iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ 642 status = "disabled"; 643 }; 644 645 pcie2: pcie@3500000 { 646 compatible = "fsl,ls1028a-pcie"; 647 reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */ 648 <0x88 0x00000000 0x0 0x00002000>; /* configuration space */ 649 reg-names = "regs", "config"; 650 interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, 651 <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; 652 interrupt-names = "pme", "aer"; 653 #address-cells = <3>; 654 #size-cells = <2>; 655 device_type = "pci"; 656 dma-coherent; 657 num-viewport = <8>; 658 bus-range = <0x0 0xff>; 659 ranges = <0x81000000 0x0 0x00000000 0x88 0x00010000 0x0 0x00010000 /* downstream I/O */ 660 0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ 661 msi-parent = <&its>; 662 #interrupt-cells = <1>; 663 interrupt-map-mask = <0 0 0 7>; 664 interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, 665 <0000 0 0 2 &gic 0 0 GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, 666 <0000 0 0 3 &gic 0 0 GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, 667 <0000 0 0 4 &gic 0 0 GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; 668 iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ 669 status = "disabled"; 670 }; 671 672 smmu: iommu@5000000 { 673 compatible = "arm,mmu-500"; 674 reg = <0 0x5000000 0 0x800000>; 675 #global-interrupts = <8>; 676 #iommu-cells = <1>; 677 stream-match-mask = <0x7c00>; 678 /* global secure fault */ 679 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, 680 /* combined secure interrupt */ 681 <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, 682 /* global non-secure fault */ 683 <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, 684 /* combined non-secure interrupt */ 685 <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, 686 /* performance counter interrupts 0-7 */ 687 <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, 688 <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, 689 /* per context interrupt, 64 interrupts */ 690 <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, 691 <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, 692 <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, 693 <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, 694 <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, 695 <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, 696 <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, 697 <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, 698 <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, 699 <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, 700 <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, 701 <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, 702 <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>, 703 <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>, 704 <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>, 705 <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>, 706 <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>, 707 <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, 708 <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, 709 <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, 710 <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, 711 <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, 712 <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, 713 <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, 714 <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>, 715 <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, 716 <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, 717 <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, 718 <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, 719 <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, 720 <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, 721 <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; 722 }; 723 724 crypto: crypto@8000000 { 725 compatible = "fsl,sec-v5.0", "fsl,sec-v4.0"; 726 fsl,sec-era = <10>; 727 #address-cells = <1>; 728 #size-cells = <1>; 729 ranges = <0x0 0x00 0x8000000 0x100000>; 730 reg = <0x00 0x8000000 0x0 0x100000>; 731 interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; 732 dma-coherent; 733 734 sec_jr0: jr@10000 { 735 compatible = "fsl,sec-v5.0-job-ring", 736 "fsl,sec-v4.0-job-ring"; 737 reg = <0x10000 0x10000>; 738 interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; 739 }; 740 741 sec_jr1: jr@20000 { 742 compatible = "fsl,sec-v5.0-job-ring", 743 "fsl,sec-v4.0-job-ring"; 744 reg = <0x20000 0x10000>; 745 interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; 746 }; 747 748 sec_jr2: jr@30000 { 749 compatible = "fsl,sec-v5.0-job-ring", 750 "fsl,sec-v4.0-job-ring"; 751 reg = <0x30000 0x10000>; 752 interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; 753 }; 754 755 sec_jr3: jr@40000 { 756 compatible = "fsl,sec-v5.0-job-ring", 757 "fsl,sec-v4.0-job-ring"; 758 reg = <0x40000 0x10000>; 759 interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; 760 }; 761 }; 762 763 qdma: dma-controller@8380000 { 764 compatible = "fsl,ls1028a-qdma", "fsl,ls1021a-qdma"; 765 reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */ 766 <0x0 0x8390000 0x0 0x10000>, /* Status regs */ 767 <0x0 0x83a0000 0x0 0x40000>; /* Block regs */ 768 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, 769 <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, 770 <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, 771 <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, 772 <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>; 773 interrupt-names = "qdma-error", "qdma-queue0", 774 "qdma-queue1", "qdma-queue2", "qdma-queue3"; 775 dma-channels = <8>; 776 block-number = <1>; 777 block-offset = <0x10000>; 778 fsl,dma-queues = <2>; 779 status-sizes = <64>; 780 queue-sizes = <64 64>; 781 }; 782 783 cluster1_core0_watchdog: watchdog@c000000 { 784 compatible = "arm,sp805", "arm,primecell"; 785 reg = <0x0 0xc000000 0x0 0x1000>; 786 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 787 QORIQ_CLK_PLL_DIV(16)>, 788 <&clockgen QORIQ_CLK_PLATFORM_PLL 789 QORIQ_CLK_PLL_DIV(16)>; 790 clock-names = "wdog_clk", "apb_pclk"; 791 }; 792 793 cluster1_core1_watchdog: watchdog@c010000 { 794 compatible = "arm,sp805", "arm,primecell"; 795 reg = <0x0 0xc010000 0x0 0x1000>; 796 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 797 QORIQ_CLK_PLL_DIV(16)>, 798 <&clockgen QORIQ_CLK_PLATFORM_PLL 799 QORIQ_CLK_PLL_DIV(16)>; 800 clock-names = "wdog_clk", "apb_pclk"; 801 }; 802 803 sai1: audio-controller@f100000 { 804 #sound-dai-cells = <0>; 805 compatible = "fsl,vf610-sai"; 806 reg = <0x0 0xf100000 0x0 0x10000>; 807 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; 808 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 809 QORIQ_CLK_PLL_DIV(2)>, 810 <&clockgen QORIQ_CLK_PLATFORM_PLL 811 QORIQ_CLK_PLL_DIV(2)>, 812 <&clockgen QORIQ_CLK_PLATFORM_PLL 813 QORIQ_CLK_PLL_DIV(2)>, 814 <&clockgen QORIQ_CLK_PLATFORM_PLL 815 QORIQ_CLK_PLL_DIV(2)>; 816 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 817 dma-names = "tx", "rx"; 818 dmas = <&edma0 1 4>, 819 <&edma0 1 3>; 820 fsl,sai-asynchronous; 821 status = "disabled"; 822 }; 823 824 sai2: audio-controller@f110000 { 825 #sound-dai-cells = <0>; 826 compatible = "fsl,vf610-sai"; 827 reg = <0x0 0xf110000 0x0 0x10000>; 828 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; 829 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 830 QORIQ_CLK_PLL_DIV(2)>, 831 <&clockgen QORIQ_CLK_PLATFORM_PLL 832 QORIQ_CLK_PLL_DIV(2)>, 833 <&clockgen QORIQ_CLK_PLATFORM_PLL 834 QORIQ_CLK_PLL_DIV(2)>, 835 <&clockgen QORIQ_CLK_PLATFORM_PLL 836 QORIQ_CLK_PLL_DIV(2)>; 837 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 838 dma-names = "tx", "rx"; 839 dmas = <&edma0 1 6>, 840 <&edma0 1 5>; 841 fsl,sai-asynchronous; 842 status = "disabled"; 843 }; 844 845 sai3: audio-controller@f120000 { 846 #sound-dai-cells = <0>; 847 compatible = "fsl,vf610-sai"; 848 reg = <0x0 0xf120000 0x0 0x10000>; 849 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; 850 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 851 QORIQ_CLK_PLL_DIV(2)>, 852 <&clockgen QORIQ_CLK_PLATFORM_PLL 853 QORIQ_CLK_PLL_DIV(2)>, 854 <&clockgen QORIQ_CLK_PLATFORM_PLL 855 QORIQ_CLK_PLL_DIV(2)>, 856 <&clockgen QORIQ_CLK_PLATFORM_PLL 857 QORIQ_CLK_PLL_DIV(2)>; 858 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 859 dma-names = "tx", "rx"; 860 dmas = <&edma0 1 8>, 861 <&edma0 1 7>; 862 fsl,sai-asynchronous; 863 status = "disabled"; 864 }; 865 866 sai4: audio-controller@f130000 { 867 #sound-dai-cells = <0>; 868 compatible = "fsl,vf610-sai"; 869 reg = <0x0 0xf130000 0x0 0x10000>; 870 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; 871 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 872 QORIQ_CLK_PLL_DIV(2)>, 873 <&clockgen QORIQ_CLK_PLATFORM_PLL 874 QORIQ_CLK_PLL_DIV(2)>, 875 <&clockgen QORIQ_CLK_PLATFORM_PLL 876 QORIQ_CLK_PLL_DIV(2)>, 877 <&clockgen QORIQ_CLK_PLATFORM_PLL 878 QORIQ_CLK_PLL_DIV(2)>; 879 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 880 dma-names = "tx", "rx"; 881 dmas = <&edma0 1 10>, 882 <&edma0 1 9>; 883 fsl,sai-asynchronous; 884 status = "disabled"; 885 }; 886 887 sai5: audio-controller@f140000 { 888 #sound-dai-cells = <0>; 889 compatible = "fsl,vf610-sai"; 890 reg = <0x0 0xf140000 0x0 0x10000>; 891 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; 892 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 893 QORIQ_CLK_PLL_DIV(2)>, 894 <&clockgen QORIQ_CLK_PLATFORM_PLL 895 QORIQ_CLK_PLL_DIV(2)>, 896 <&clockgen QORIQ_CLK_PLATFORM_PLL 897 QORIQ_CLK_PLL_DIV(2)>, 898 <&clockgen QORIQ_CLK_PLATFORM_PLL 899 QORIQ_CLK_PLL_DIV(2)>; 900 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 901 dma-names = "tx", "rx"; 902 dmas = <&edma0 1 12>, 903 <&edma0 1 11>; 904 fsl,sai-asynchronous; 905 status = "disabled"; 906 }; 907 908 sai6: audio-controller@f150000 { 909 #sound-dai-cells = <0>; 910 compatible = "fsl,vf610-sai"; 911 reg = <0x0 0xf150000 0x0 0x10000>; 912 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; 913 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 914 QORIQ_CLK_PLL_DIV(2)>, 915 <&clockgen QORIQ_CLK_PLATFORM_PLL 916 QORIQ_CLK_PLL_DIV(2)>, 917 <&clockgen QORIQ_CLK_PLATFORM_PLL 918 QORIQ_CLK_PLL_DIV(2)>, 919 <&clockgen QORIQ_CLK_PLATFORM_PLL 920 QORIQ_CLK_PLL_DIV(2)>; 921 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 922 dma-names = "tx", "rx"; 923 dmas = <&edma0 1 14>, 924 <&edma0 1 13>; 925 fsl,sai-asynchronous; 926 status = "disabled"; 927 }; 928 929 tmu: tmu@1f80000 { 930 compatible = "fsl,qoriq-tmu"; 931 reg = <0x0 0x1f80000 0x0 0x10000>; 932 interrupts = <0 23 0x4>; 933 fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>; 934 fsl,tmu-calibration = <0x00000000 0x00000024 935 0x00000001 0x0000002b 936 0x00000002 0x00000031 937 0x00000003 0x00000038 938 0x00000004 0x0000003f 939 0x00000005 0x00000045 940 0x00000006 0x0000004c 941 0x00000007 0x00000053 942 0x00000008 0x00000059 943 0x00000009 0x00000060 944 0x0000000a 0x00000066 945 0x0000000b 0x0000006d 946 947 0x00010000 0x0000001c 948 0x00010001 0x00000024 949 0x00010002 0x0000002c 950 0x00010003 0x00000035 951 0x00010004 0x0000003d 952 0x00010005 0x00000045 953 0x00010006 0x0000004d 954 0x00010007 0x00000055 955 0x00010008 0x0000005e 956 0x00010009 0x00000066 957 0x0001000a 0x0000006e 958 959 0x00020000 0x00000018 960 0x00020001 0x00000022 961 0x00020002 0x0000002d 962 0x00020003 0x00000038 963 0x00020004 0x00000043 964 0x00020005 0x0000004d 965 0x00020006 0x00000058 966 0x00020007 0x00000063 967 0x00020008 0x0000006e 968 969 0x00030000 0x00000010 970 0x00030001 0x0000001c 971 0x00030002 0x00000029 972 0x00030003 0x00000036 973 0x00030004 0x00000042 974 0x00030005 0x0000004f 975 0x00030006 0x0000005b 976 0x00030007 0x00000068>; 977 little-endian; 978 #thermal-sensor-cells = <1>; 979 }; 980 981 pcie@1f0000000 { /* Integrated Endpoint Root Complex */ 982 compatible = "pci-host-ecam-generic"; 983 reg = <0x01 0xf0000000 0x0 0x100000>; 984 #address-cells = <3>; 985 #size-cells = <2>; 986 msi-parent = <&its>; 987 device_type = "pci"; 988 bus-range = <0x0 0x0>; 989 dma-coherent; 990 msi-map = <0 &its 0x17 0xe>; 991 iommu-map = <0 &smmu 0x17 0xe>; 992 /* PF0-6 BAR0 - non-prefetchable memory */ 993 ranges = <0x82000000 0x1 0xf8000000 0x1 0xf8000000 0x0 0x160000 994 /* PF0-6 BAR2 - prefetchable memory */ 995 0xc2000000 0x1 0xf8160000 0x1 0xf8160000 0x0 0x070000 996 /* PF0: VF0-1 BAR0 - non-prefetchable memory */ 997 0x82000000 0x1 0xf81d0000 0x1 0xf81d0000 0x0 0x020000 998 /* PF0: VF0-1 BAR2 - prefetchable memory */ 999 0xc2000000 0x1 0xf81f0000 0x1 0xf81f0000 0x0 0x020000 1000 /* PF1: VF0-1 BAR0 - non-prefetchable memory */ 1001 0x82000000 0x1 0xf8210000 0x1 0xf8210000 0x0 0x020000 1002 /* PF1: VF0-1 BAR2 - prefetchable memory */ 1003 0xc2000000 0x1 0xf8230000 0x1 0xf8230000 0x0 0x020000 1004 /* BAR4 (PF5) - non-prefetchable memory */ 1005 0x82000000 0x1 0xfc000000 0x1 0xfc000000 0x0 0x400000>; 1006 1007 enetc_port0: ethernet@0,0 { 1008 compatible = "fsl,enetc"; 1009 reg = <0x000000 0 0 0 0>; 1010 status = "disabled"; 1011 }; 1012 1013 enetc_port1: ethernet@0,1 { 1014 compatible = "fsl,enetc"; 1015 reg = <0x000100 0 0 0 0>; 1016 status = "disabled"; 1017 }; 1018 1019 enetc_port2: ethernet@0,2 { 1020 compatible = "fsl,enetc"; 1021 reg = <0x000200 0 0 0 0>; 1022 phy-mode = "internal"; 1023 status = "disabled"; 1024 1025 fixed-link { 1026 speed = <2500>; 1027 full-duplex; 1028 }; 1029 }; 1030 1031 enetc_mdio_pf3: mdio@0,3 { 1032 compatible = "fsl,enetc-mdio"; 1033 reg = <0x000300 0 0 0 0>; 1034 #address-cells = <1>; 1035 #size-cells = <0>; 1036 }; 1037 1038 ethernet@0,4 { 1039 compatible = "fsl,enetc-ptp"; 1040 reg = <0x000400 0 0 0 0>; 1041 clocks = <&clockgen QORIQ_CLK_HWACCEL 3>; 1042 little-endian; 1043 fsl,extts-fifo; 1044 }; 1045 1046 mscc_felix: ethernet-switch@0,5 { 1047 reg = <0x000500 0 0 0 0>; 1048 /* IEP INT_B */ 1049 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; 1050 status = "disabled"; 1051 1052 ports { 1053 #address-cells = <1>; 1054 #size-cells = <0>; 1055 1056 /* External ports */ 1057 mscc_felix_port0: port@0 { 1058 reg = <0>; 1059 status = "disabled"; 1060 }; 1061 1062 mscc_felix_port1: port@1 { 1063 reg = <1>; 1064 status = "disabled"; 1065 }; 1066 1067 mscc_felix_port2: port@2 { 1068 reg = <2>; 1069 status = "disabled"; 1070 }; 1071 1072 mscc_felix_port3: port@3 { 1073 reg = <3>; 1074 status = "disabled"; 1075 }; 1076 1077 /* Internal ports */ 1078 mscc_felix_port4: port@4 { 1079 reg = <4>; 1080 phy-mode = "internal"; 1081 status = "disabled"; 1082 1083 fixed-link { 1084 speed = <2500>; 1085 full-duplex; 1086 }; 1087 }; 1088 1089 mscc_felix_port5: port@5 { 1090 reg = <5>; 1091 phy-mode = "internal"; 1092 status = "disabled"; 1093 1094 fixed-link { 1095 speed = <1000>; 1096 full-duplex; 1097 }; 1098 }; 1099 }; 1100 }; 1101 1102 enetc_port3: ethernet@0,6 { 1103 compatible = "fsl,enetc"; 1104 reg = <0x000600 0 0 0 0>; 1105 phy-mode = "internal"; 1106 status = "disabled"; 1107 1108 fixed-link { 1109 speed = <1000>; 1110 full-duplex; 1111 }; 1112 }; 1113 1114 rcec@1f,0 { 1115 reg = <0x00f800 0 0 0 0>; 1116 /* IEP INT_A */ 1117 interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; 1118 }; 1119 }; 1120 1121 /* Integrated Endpoint Register Block */ 1122 ierb@1f0800000 { 1123 compatible = "fsl,ls1028a-enetc-ierb"; 1124 reg = <0x01 0xf0800000 0x0 0x10000>; 1125 }; 1126 1127 rcpm: power-controller@1e34040 { 1128 compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+"; 1129 reg = <0x0 0x1e34040 0x0 0x1c>; 1130 #fsl,rcpm-wakeup-cells = <7>; 1131 little-endian; 1132 }; 1133 1134 ftm_alarm0: timer@2800000 { 1135 compatible = "fsl,ls1028a-ftm-alarm"; 1136 reg = <0x0 0x2800000 0x0 0x10000>; 1137 fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>; 1138 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; 1139 }; 1140 }; 1141 1142 malidp0: display@f080000 { 1143 compatible = "arm,mali-dp500"; 1144 reg = <0x0 0xf080000 0x0 0x10000>; 1145 interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, 1146 <0 223 IRQ_TYPE_LEVEL_HIGH>; 1147 interrupt-names = "DE", "SE"; 1148 clocks = <&dpclk>, 1149 <&clockgen QORIQ_CLK_HWACCEL 2>, 1150 <&clockgen QORIQ_CLK_HWACCEL 2>, 1151 <&clockgen QORIQ_CLK_HWACCEL 2>; 1152 clock-names = "pxlclk", "mclk", "aclk", "pclk"; 1153 arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; 1154 arm,malidp-arqos-value = <0xd000d000>; 1155 1156 port { 1157 dp0_out: endpoint { 1158 1159 }; 1160 }; 1161 }; 1162}; 1163