1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Device Tree Include file for NXP Layerscape-1028A family SoC. 4 * 5 * Copyright 2018-2020 NXP 6 * 7 * Harninder Rai <harninder.rai@nxp.com> 8 * 9 */ 10 11#include <dt-bindings/clock/fsl,qoriq-clockgen.h> 12#include <dt-bindings/interrupt-controller/arm-gic.h> 13#include <dt-bindings/thermal/thermal.h> 14 15/ { 16 compatible = "fsl,ls1028a"; 17 interrupt-parent = <&gic>; 18 #address-cells = <2>; 19 #size-cells = <2>; 20 21 cpus { 22 #address-cells = <1>; 23 #size-cells = <0>; 24 25 cpu0: cpu@0 { 26 device_type = "cpu"; 27 compatible = "arm,cortex-a72"; 28 reg = <0x0>; 29 enable-method = "psci"; 30 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 31 next-level-cache = <&l2>; 32 cpu-idle-states = <&CPU_PW20>; 33 #cooling-cells = <2>; 34 }; 35 36 cpu1: cpu@1 { 37 device_type = "cpu"; 38 compatible = "arm,cortex-a72"; 39 reg = <0x1>; 40 enable-method = "psci"; 41 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 42 next-level-cache = <&l2>; 43 cpu-idle-states = <&CPU_PW20>; 44 #cooling-cells = <2>; 45 }; 46 47 l2: l2-cache { 48 compatible = "cache"; 49 cache-level = <2>; 50 }; 51 }; 52 53 idle-states { 54 /* 55 * PSCI node is not added default, U-boot will add missing 56 * parts if it determines to use PSCI. 57 */ 58 entry-method = "psci"; 59 60 CPU_PW20: cpu-pw20 { 61 compatible = "arm,idle-state"; 62 idle-state-name = "PW20"; 63 arm,psci-suspend-param = <0x0>; 64 entry-latency-us = <2000>; 65 exit-latency-us = <2000>; 66 min-residency-us = <6000>; 67 }; 68 }; 69 70 rtc_clk: rtc-clk { 71 compatible = "fixed-clock"; 72 #clock-cells = <0>; 73 clock-frequency = <32768>; 74 clock-output-names = "rtc_clk"; 75 }; 76 77 sysclk: sysclk { 78 compatible = "fixed-clock"; 79 #clock-cells = <0>; 80 clock-frequency = <100000000>; 81 clock-output-names = "sysclk"; 82 }; 83 84 osc_27m: clock-osc-27m { 85 compatible = "fixed-clock"; 86 #clock-cells = <0>; 87 clock-frequency = <27000000>; 88 clock-output-names = "phy_27m"; 89 }; 90 91 firmware { 92 optee: optee { 93 compatible = "linaro,optee-tz"; 94 method = "smc"; 95 status = "disabled"; 96 }; 97 }; 98 99 reboot { 100 compatible = "syscon-reboot"; 101 regmap = <&rst>; 102 offset = <0>; 103 mask = <0x02>; 104 }; 105 106 timer { 107 compatible = "arm,armv8-timer"; 108 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | 109 IRQ_TYPE_LEVEL_LOW)>, 110 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | 111 IRQ_TYPE_LEVEL_LOW)>, 112 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | 113 IRQ_TYPE_LEVEL_LOW)>, 114 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | 115 IRQ_TYPE_LEVEL_LOW)>; 116 }; 117 118 pmu { 119 compatible = "arm,cortex-a72-pmu"; 120 interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; 121 }; 122 123 gic: interrupt-controller@6000000 { 124 compatible = "arm,gic-v3"; 125 #address-cells = <2>; 126 #size-cells = <2>; 127 ranges; 128 reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ 129 <0x0 0x06040000 0 0x40000>; /* GIC Redistributor */ 130 #interrupt-cells = <3>; 131 interrupt-controller; 132 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) | 133 IRQ_TYPE_LEVEL_LOW)>; 134 its: gic-its@6020000 { 135 compatible = "arm,gic-v3-its"; 136 msi-controller; 137 reg = <0x0 0x06020000 0 0x20000>;/* GIC Translater */ 138 }; 139 }; 140 141 thermal-zones { 142 ddr-controller { 143 polling-delay-passive = <1000>; 144 polling-delay = <5000>; 145 thermal-sensors = <&tmu 0>; 146 147 trips { 148 ddr-ctrler-alert { 149 temperature = <85000>; 150 hysteresis = <2000>; 151 type = "passive"; 152 }; 153 154 ddr-ctrler-crit { 155 temperature = <95000>; 156 hysteresis = <2000>; 157 type = "critical"; 158 }; 159 }; 160 }; 161 162 core-cluster { 163 polling-delay-passive = <1000>; 164 polling-delay = <5000>; 165 thermal-sensors = <&tmu 1>; 166 167 trips { 168 core_cluster_alert: core-cluster-alert { 169 temperature = <85000>; 170 hysteresis = <2000>; 171 type = "passive"; 172 }; 173 174 core_cluster_crit: core-cluster-crit { 175 temperature = <95000>; 176 hysteresis = <2000>; 177 type = "critical"; 178 }; 179 }; 180 181 cooling-maps { 182 map0 { 183 trip = <&core_cluster_alert>; 184 cooling-device = 185 <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 186 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 187 }; 188 }; 189 }; 190 }; 191 192 soc: soc { 193 compatible = "simple-bus"; 194 #address-cells = <2>; 195 #size-cells = <2>; 196 ranges; 197 198 ddr: memory-controller@1080000 { 199 compatible = "fsl,qoriq-memory-controller"; 200 reg = <0x0 0x1080000 0x0 0x1000>; 201 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; 202 little-endian; 203 }; 204 205 dcfg: syscon@1e00000 { 206 #address-cells = <1>; 207 #size-cells = <1>; 208 compatible = "fsl,ls1028a-dcfg", "syscon", "simple-mfd"; 209 reg = <0x0 0x1e00000 0x0 0x10000>; 210 ranges = <0x0 0x0 0x1e00000 0x10000>; 211 little-endian; 212 213 fspi_clk: clock-controller@900 { 214 compatible = "fsl,ls1028a-flexspi-clk"; 215 reg = <0x900 0x4>; 216 #clock-cells = <0>; 217 clocks = <&clockgen QORIQ_CLK_HWACCEL 0>; 218 clock-output-names = "fspi_clk"; 219 }; 220 }; 221 222 rst: syscon@1e60000 { 223 compatible = "syscon"; 224 reg = <0x0 0x1e60000 0x0 0x10000>; 225 little-endian; 226 }; 227 228 sfp: efuse@1e80000 { 229 compatible = "fsl,ls1028a-sfp"; 230 reg = <0x0 0x1e80000 0x0 0x10000>; 231 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 232 QORIQ_CLK_PLL_DIV(4)>; 233 clock-names = "sfp"; 234 #address-cells = <1>; 235 #size-cells = <1>; 236 237 ls1028a_uid: unique-id@1c { 238 reg = <0x1c 0x8>; 239 }; 240 }; 241 242 scfg: syscon@1fc0000 { 243 compatible = "fsl,ls1028a-scfg", "syscon"; 244 reg = <0x0 0x1fc0000 0x0 0x10000>; 245 big-endian; 246 }; 247 248 clockgen: clock-controller@1300000 { 249 compatible = "fsl,ls1028a-clockgen"; 250 reg = <0x0 0x1300000 0x0 0xa0000>; 251 #clock-cells = <2>; 252 clocks = <&sysclk>; 253 }; 254 255 i2c0: i2c@2000000 { 256 compatible = "fsl,vf610-i2c"; 257 #address-cells = <1>; 258 #size-cells = <0>; 259 reg = <0x0 0x2000000 0x0 0x10000>; 260 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; 261 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 262 QORIQ_CLK_PLL_DIV(4)>; 263 status = "disabled"; 264 }; 265 266 i2c1: i2c@2010000 { 267 compatible = "fsl,vf610-i2c"; 268 #address-cells = <1>; 269 #size-cells = <0>; 270 reg = <0x0 0x2010000 0x0 0x10000>; 271 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; 272 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 273 QORIQ_CLK_PLL_DIV(4)>; 274 status = "disabled"; 275 }; 276 277 i2c2: i2c@2020000 { 278 compatible = "fsl,vf610-i2c"; 279 #address-cells = <1>; 280 #size-cells = <0>; 281 reg = <0x0 0x2020000 0x0 0x10000>; 282 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; 283 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 284 QORIQ_CLK_PLL_DIV(4)>; 285 status = "disabled"; 286 }; 287 288 i2c3: i2c@2030000 { 289 compatible = "fsl,vf610-i2c"; 290 #address-cells = <1>; 291 #size-cells = <0>; 292 reg = <0x0 0x2030000 0x0 0x10000>; 293 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; 294 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 295 QORIQ_CLK_PLL_DIV(4)>; 296 status = "disabled"; 297 }; 298 299 i2c4: i2c@2040000 { 300 compatible = "fsl,vf610-i2c"; 301 #address-cells = <1>; 302 #size-cells = <0>; 303 reg = <0x0 0x2040000 0x0 0x10000>; 304 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; 305 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 306 QORIQ_CLK_PLL_DIV(4)>; 307 status = "disabled"; 308 }; 309 310 i2c5: i2c@2050000 { 311 compatible = "fsl,vf610-i2c"; 312 #address-cells = <1>; 313 #size-cells = <0>; 314 reg = <0x0 0x2050000 0x0 0x10000>; 315 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; 316 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 317 QORIQ_CLK_PLL_DIV(4)>; 318 status = "disabled"; 319 }; 320 321 i2c6: i2c@2060000 { 322 compatible = "fsl,vf610-i2c"; 323 #address-cells = <1>; 324 #size-cells = <0>; 325 reg = <0x0 0x2060000 0x0 0x10000>; 326 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; 327 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 328 QORIQ_CLK_PLL_DIV(4)>; 329 status = "disabled"; 330 }; 331 332 i2c7: i2c@2070000 { 333 compatible = "fsl,vf610-i2c"; 334 #address-cells = <1>; 335 #size-cells = <0>; 336 reg = <0x0 0x2070000 0x0 0x10000>; 337 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; 338 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 339 QORIQ_CLK_PLL_DIV(4)>; 340 status = "disabled"; 341 }; 342 343 fspi: spi@20c0000 { 344 compatible = "nxp,lx2160a-fspi"; 345 #address-cells = <1>; 346 #size-cells = <0>; 347 reg = <0x0 0x20c0000 0x0 0x10000>, 348 <0x0 0x20000000 0x0 0x10000000>; 349 reg-names = "fspi_base", "fspi_mmap"; 350 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; 351 clocks = <&fspi_clk>, <&fspi_clk>; 352 clock-names = "fspi_en", "fspi"; 353 status = "disabled"; 354 }; 355 356 dspi0: spi@2100000 { 357 compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi"; 358 #address-cells = <1>; 359 #size-cells = <0>; 360 reg = <0x0 0x2100000 0x0 0x10000>; 361 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; 362 clock-names = "dspi"; 363 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 364 QORIQ_CLK_PLL_DIV(2)>; 365 dmas = <&edma0 0 62>, <&edma0 0 60>; 366 dma-names = "tx", "rx"; 367 spi-num-chipselects = <4>; 368 little-endian; 369 status = "disabled"; 370 }; 371 372 dspi1: spi@2110000 { 373 compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi"; 374 #address-cells = <1>; 375 #size-cells = <0>; 376 reg = <0x0 0x2110000 0x0 0x10000>; 377 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; 378 clock-names = "dspi"; 379 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 380 QORIQ_CLK_PLL_DIV(2)>; 381 dmas = <&edma0 0 58>, <&edma0 0 56>; 382 dma-names = "tx", "rx"; 383 spi-num-chipselects = <4>; 384 little-endian; 385 status = "disabled"; 386 }; 387 388 dspi2: spi@2120000 { 389 compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi"; 390 #address-cells = <1>; 391 #size-cells = <0>; 392 reg = <0x0 0x2120000 0x0 0x10000>; 393 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; 394 clock-names = "dspi"; 395 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 396 QORIQ_CLK_PLL_DIV(2)>; 397 dmas = <&edma0 0 54>, <&edma0 0 2>; 398 dma-names = "tx", "rx"; 399 spi-num-chipselects = <3>; 400 little-endian; 401 status = "disabled"; 402 }; 403 404 esdhc: mmc@2140000 { 405 compatible = "fsl,ls1028a-esdhc", "fsl,esdhc"; 406 reg = <0x0 0x2140000 0x0 0x10000>; 407 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; 408 clock-frequency = <0>; /* fixed up by bootloader */ 409 clocks = <&clockgen QORIQ_CLK_HWACCEL 1>; 410 voltage-ranges = <1800 1800 3300 3300>; 411 sdhci,auto-cmd12; 412 little-endian; 413 bus-width = <4>; 414 status = "disabled"; 415 }; 416 417 esdhc1: mmc@2150000 { 418 compatible = "fsl,ls1028a-esdhc", "fsl,esdhc"; 419 reg = <0x0 0x2150000 0x0 0x10000>; 420 interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; 421 clock-frequency = <0>; /* fixed up by bootloader */ 422 clocks = <&clockgen QORIQ_CLK_HWACCEL 1>; 423 voltage-ranges = <1800 1800>; 424 sdhci,auto-cmd12; 425 non-removable; 426 little-endian; 427 bus-width = <4>; 428 status = "disabled"; 429 }; 430 431 can0: can@2180000 { 432 compatible = "fsl,lx2160ar1-flexcan"; 433 reg = <0x0 0x2180000 0x0 0x10000>; 434 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; 435 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 436 QORIQ_CLK_PLL_DIV(2)>, 437 <&clockgen QORIQ_CLK_PLATFORM_PLL 438 QORIQ_CLK_PLL_DIV(2)>; 439 clock-names = "ipg", "per"; 440 status = "disabled"; 441 }; 442 443 can1: can@2190000 { 444 compatible = "fsl,lx2160ar1-flexcan"; 445 reg = <0x0 0x2190000 0x0 0x10000>; 446 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; 447 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 448 QORIQ_CLK_PLL_DIV(2)>, 449 <&clockgen QORIQ_CLK_PLATFORM_PLL 450 QORIQ_CLK_PLL_DIV(2)>; 451 clock-names = "ipg", "per"; 452 status = "disabled"; 453 }; 454 455 duart0: serial@21c0500 { 456 compatible = "fsl,ns16550", "ns16550a"; 457 reg = <0x00 0x21c0500 0x0 0x100>; 458 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; 459 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 460 QORIQ_CLK_PLL_DIV(2)>; 461 status = "disabled"; 462 }; 463 464 duart1: serial@21c0600 { 465 compatible = "fsl,ns16550", "ns16550a"; 466 reg = <0x00 0x21c0600 0x0 0x100>; 467 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; 468 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 469 QORIQ_CLK_PLL_DIV(2)>; 470 status = "disabled"; 471 }; 472 473 474 lpuart0: serial@2260000 { 475 compatible = "fsl,ls1028a-lpuart"; 476 reg = <0x0 0x2260000 0x0 0x1000>; 477 interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; 478 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 479 QORIQ_CLK_PLL_DIV(2)>; 480 clock-names = "ipg"; 481 dma-names = "rx","tx"; 482 dmas = <&edma0 1 32>, 483 <&edma0 1 33>; 484 status = "disabled"; 485 }; 486 487 lpuart1: serial@2270000 { 488 compatible = "fsl,ls1028a-lpuart"; 489 reg = <0x0 0x2270000 0x0 0x1000>; 490 interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; 491 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 492 QORIQ_CLK_PLL_DIV(2)>; 493 clock-names = "ipg"; 494 dma-names = "rx","tx"; 495 dmas = <&edma0 1 30>, 496 <&edma0 1 31>; 497 status = "disabled"; 498 }; 499 500 lpuart2: serial@2280000 { 501 compatible = "fsl,ls1028a-lpuart"; 502 reg = <0x0 0x2280000 0x0 0x1000>; 503 interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; 504 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 505 QORIQ_CLK_PLL_DIV(2)>; 506 clock-names = "ipg"; 507 dma-names = "rx","tx"; 508 dmas = <&edma0 1 28>, 509 <&edma0 1 29>; 510 status = "disabled"; 511 }; 512 513 lpuart3: serial@2290000 { 514 compatible = "fsl,ls1028a-lpuart"; 515 reg = <0x0 0x2290000 0x0 0x1000>; 516 interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; 517 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 518 QORIQ_CLK_PLL_DIV(2)>; 519 clock-names = "ipg"; 520 dma-names = "rx","tx"; 521 dmas = <&edma0 1 26>, 522 <&edma0 1 27>; 523 status = "disabled"; 524 }; 525 526 lpuart4: serial@22a0000 { 527 compatible = "fsl,ls1028a-lpuart"; 528 reg = <0x0 0x22a0000 0x0 0x1000>; 529 interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>; 530 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 531 QORIQ_CLK_PLL_DIV(2)>; 532 clock-names = "ipg"; 533 dma-names = "rx","tx"; 534 dmas = <&edma0 1 24>, 535 <&edma0 1 25>; 536 status = "disabled"; 537 }; 538 539 lpuart5: serial@22b0000 { 540 compatible = "fsl,ls1028a-lpuart"; 541 reg = <0x0 0x22b0000 0x0 0x1000>; 542 interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>; 543 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 544 QORIQ_CLK_PLL_DIV(2)>; 545 clock-names = "ipg"; 546 dma-names = "rx","tx"; 547 dmas = <&edma0 1 22>, 548 <&edma0 1 23>; 549 status = "disabled"; 550 }; 551 552 edma0: dma-controller@22c0000 { 553 #dma-cells = <2>; 554 compatible = "fsl,ls1028a-edma", "fsl,vf610-edma"; 555 reg = <0x0 0x22c0000 0x0 0x10000>, 556 <0x0 0x22d0000 0x0 0x10000>, 557 <0x0 0x22e0000 0x0 0x10000>; 558 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, 559 <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; 560 interrupt-names = "edma-tx", "edma-err"; 561 dma-channels = <32>; 562 clock-names = "dmamux0", "dmamux1"; 563 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 564 QORIQ_CLK_PLL_DIV(2)>, 565 <&clockgen QORIQ_CLK_PLATFORM_PLL 566 QORIQ_CLK_PLL_DIV(2)>; 567 }; 568 569 gpio1: gpio@2300000 { 570 compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio"; 571 reg = <0x0 0x2300000 0x0 0x10000>; 572 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; 573 gpio-controller; 574 #gpio-cells = <2>; 575 interrupt-controller; 576 #interrupt-cells = <2>; 577 little-endian; 578 }; 579 580 gpio2: gpio@2310000 { 581 compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio"; 582 reg = <0x0 0x2310000 0x0 0x10000>; 583 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; 584 gpio-controller; 585 #gpio-cells = <2>; 586 interrupt-controller; 587 #interrupt-cells = <2>; 588 little-endian; 589 }; 590 591 gpio3: gpio@2320000 { 592 compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio"; 593 reg = <0x0 0x2320000 0x0 0x10000>; 594 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; 595 gpio-controller; 596 #gpio-cells = <2>; 597 interrupt-controller; 598 #interrupt-cells = <2>; 599 little-endian; 600 }; 601 602 usb0: usb@3100000 { 603 compatible = "fsl,ls1028a-dwc3", "snps,dwc3"; 604 reg = <0x0 0x3100000 0x0 0x10000>; 605 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; 606 snps,dis_rxdet_inp3_quirk; 607 snps,quirk-frame-length-adjustment = <0x20>; 608 snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; 609 status = "disabled"; 610 }; 611 612 usb1: usb@3110000 { 613 compatible = "fsl,ls1028a-dwc3", "snps,dwc3"; 614 reg = <0x0 0x3110000 0x0 0x10000>; 615 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; 616 snps,dis_rxdet_inp3_quirk; 617 snps,quirk-frame-length-adjustment = <0x20>; 618 snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; 619 status = "disabled"; 620 }; 621 622 sata: sata@3200000 { 623 compatible = "fsl,ls1028a-ahci"; 624 reg = <0x0 0x3200000 0x0 0x10000>, 625 <0x7 0x100520 0x0 0x4>; 626 reg-names = "ahci", "sata-ecc"; 627 interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; 628 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 629 QORIQ_CLK_PLL_DIV(2)>; 630 status = "disabled"; 631 }; 632 633 pcie1: pcie@3400000 { 634 compatible = "fsl,ls1028a-pcie"; 635 reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ 636 <0x80 0x00000000 0x0 0x00002000>; /* configuration space */ 637 reg-names = "regs", "config"; 638 interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ 639 <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ 640 interrupt-names = "pme", "aer"; 641 #address-cells = <3>; 642 #size-cells = <2>; 643 device_type = "pci"; 644 dma-coherent; 645 num-viewport = <8>; 646 bus-range = <0x0 0xff>; 647 ranges = <0x81000000 0x0 0x00000000 0x80 0x00010000 0x0 0x00010000 /* downstream I/O */ 648 0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ 649 msi-parent = <&its>; 650 #interrupt-cells = <1>; 651 interrupt-map-mask = <0 0 0 7>; 652 interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, 653 <0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, 654 <0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, 655 <0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; 656 iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ 657 status = "disabled"; 658 }; 659 660 pcie_ep1: pcie-ep@3400000 { 661 compatible = "fsl,ls1028a-pcie-ep","fsl,ls-pcie-ep"; 662 reg = <0x00 0x03400000 0x0 0x00100000 663 0x80 0x00000000 0x8 0x00000000>; 664 reg-names = "regs", "addr_space"; 665 interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */ 666 interrupt-names = "pme"; 667 num-ib-windows = <6>; 668 num-ob-windows = <8>; 669 status = "disabled"; 670 }; 671 672 pcie2: pcie@3500000 { 673 compatible = "fsl,ls1028a-pcie"; 674 reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */ 675 <0x88 0x00000000 0x0 0x00002000>; /* configuration space */ 676 reg-names = "regs", "config"; 677 interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, 678 <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; 679 interrupt-names = "pme", "aer"; 680 #address-cells = <3>; 681 #size-cells = <2>; 682 device_type = "pci"; 683 dma-coherent; 684 num-viewport = <8>; 685 bus-range = <0x0 0xff>; 686 ranges = <0x81000000 0x0 0x00000000 0x88 0x00010000 0x0 0x00010000 /* downstream I/O */ 687 0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ 688 msi-parent = <&its>; 689 #interrupt-cells = <1>; 690 interrupt-map-mask = <0 0 0 7>; 691 interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, 692 <0000 0 0 2 &gic 0 0 GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, 693 <0000 0 0 3 &gic 0 0 GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, 694 <0000 0 0 4 &gic 0 0 GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; 695 iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ 696 status = "disabled"; 697 }; 698 699 pcie_ep2: pcie-ep@3500000 { 700 compatible = "fsl,ls1028a-pcie-ep","fsl,ls-pcie-ep"; 701 reg = <0x00 0x03500000 0x0 0x00100000 702 0x88 0x00000000 0x8 0x00000000>; 703 reg-names = "regs", "addr_space"; 704 interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */ 705 interrupt-names = "pme"; 706 num-ib-windows = <6>; 707 num-ob-windows = <8>; 708 status = "disabled"; 709 }; 710 711 smmu: iommu@5000000 { 712 compatible = "arm,mmu-500"; 713 reg = <0 0x5000000 0 0x800000>; 714 #global-interrupts = <8>; 715 #iommu-cells = <1>; 716 dma-coherent; 717 stream-match-mask = <0x7c00>; 718 /* global secure fault */ 719 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, 720 /* combined secure interrupt */ 721 <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, 722 /* global non-secure fault */ 723 <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, 724 /* combined non-secure interrupt */ 725 <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, 726 /* performance counter interrupts 0-7 */ 727 <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, 728 <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, 729 /* per context interrupt, 64 interrupts */ 730 <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, 731 <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, 732 <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, 733 <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, 734 <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, 735 <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, 736 <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, 737 <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, 738 <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, 739 <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, 740 <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, 741 <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, 742 <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>, 743 <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>, 744 <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>, 745 <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>, 746 <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>, 747 <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, 748 <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, 749 <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, 750 <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, 751 <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, 752 <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, 753 <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, 754 <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>, 755 <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, 756 <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, 757 <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, 758 <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, 759 <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, 760 <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, 761 <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; 762 }; 763 764 crypto: crypto@8000000 { 765 compatible = "fsl,sec-v5.0", "fsl,sec-v4.0"; 766 fsl,sec-era = <10>; 767 #address-cells = <1>; 768 #size-cells = <1>; 769 ranges = <0x0 0x00 0x8000000 0x100000>; 770 reg = <0x00 0x8000000 0x0 0x100000>; 771 interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; 772 dma-coherent; 773 774 sec_jr0: jr@10000 { 775 compatible = "fsl,sec-v5.0-job-ring", 776 "fsl,sec-v4.0-job-ring"; 777 reg = <0x10000 0x10000>; 778 interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; 779 }; 780 781 sec_jr1: jr@20000 { 782 compatible = "fsl,sec-v5.0-job-ring", 783 "fsl,sec-v4.0-job-ring"; 784 reg = <0x20000 0x10000>; 785 interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; 786 }; 787 788 sec_jr2: jr@30000 { 789 compatible = "fsl,sec-v5.0-job-ring", 790 "fsl,sec-v4.0-job-ring"; 791 reg = <0x30000 0x10000>; 792 interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; 793 }; 794 795 sec_jr3: jr@40000 { 796 compatible = "fsl,sec-v5.0-job-ring", 797 "fsl,sec-v4.0-job-ring"; 798 reg = <0x40000 0x10000>; 799 interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; 800 }; 801 }; 802 803 qdma: dma-controller@8380000 { 804 compatible = "fsl,ls1028a-qdma", "fsl,ls1021a-qdma"; 805 reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */ 806 <0x0 0x8390000 0x0 0x10000>, /* Status regs */ 807 <0x0 0x83a0000 0x0 0x40000>; /* Block regs */ 808 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, 809 <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, 810 <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, 811 <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, 812 <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>; 813 interrupt-names = "qdma-error", "qdma-queue0", 814 "qdma-queue1", "qdma-queue2", "qdma-queue3"; 815 dma-channels = <8>; 816 block-number = <1>; 817 block-offset = <0x10000>; 818 fsl,dma-queues = <2>; 819 status-sizes = <64>; 820 queue-sizes = <64 64>; 821 }; 822 823 cluster1_core0_watchdog: watchdog@c000000 { 824 compatible = "arm,sp805", "arm,primecell"; 825 reg = <0x0 0xc000000 0x0 0x1000>; 826 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 827 QORIQ_CLK_PLL_DIV(16)>, 828 <&clockgen QORIQ_CLK_PLATFORM_PLL 829 QORIQ_CLK_PLL_DIV(16)>; 830 clock-names = "wdog_clk", "apb_pclk"; 831 }; 832 833 cluster1_core1_watchdog: watchdog@c010000 { 834 compatible = "arm,sp805", "arm,primecell"; 835 reg = <0x0 0xc010000 0x0 0x1000>; 836 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 837 QORIQ_CLK_PLL_DIV(16)>, 838 <&clockgen QORIQ_CLK_PLATFORM_PLL 839 QORIQ_CLK_PLL_DIV(16)>; 840 clock-names = "wdog_clk", "apb_pclk"; 841 }; 842 843 malidp0: display@f080000 { 844 compatible = "arm,mali-dp500"; 845 reg = <0x0 0xf080000 0x0 0x10000>; 846 interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, 847 <0 223 IRQ_TYPE_LEVEL_HIGH>; 848 interrupt-names = "DE", "SE"; 849 clocks = <&dpclk>, 850 <&clockgen QORIQ_CLK_HWACCEL 2>, 851 <&clockgen QORIQ_CLK_HWACCEL 2>, 852 <&clockgen QORIQ_CLK_HWACCEL 2>; 853 clock-names = "pxlclk", "mclk", "aclk", "pclk"; 854 arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; 855 arm,malidp-arqos-value = <0xd000d000>; 856 857 port { 858 dpi0_out: endpoint { 859 860 }; 861 }; 862 }; 863 864 gpu: gpu@f0c0000 { 865 compatible = "vivante,gc"; 866 reg = <0x0 0xf0c0000 0x0 0x10000>; 867 interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; 868 clocks = <&clockgen QORIQ_CLK_HWACCEL 2>, 869 <&clockgen QORIQ_CLK_HWACCEL 2>, 870 <&clockgen QORIQ_CLK_HWACCEL 2>; 871 clock-names = "core", "shader", "bus"; 872 #cooling-cells = <2>; 873 }; 874 875 sai1: audio-controller@f100000 { 876 #sound-dai-cells = <0>; 877 compatible = "fsl,vf610-sai"; 878 reg = <0x0 0xf100000 0x0 0x10000>; 879 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; 880 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 881 QORIQ_CLK_PLL_DIV(2)>, 882 <&clockgen QORIQ_CLK_PLATFORM_PLL 883 QORIQ_CLK_PLL_DIV(2)>, 884 <&clockgen QORIQ_CLK_PLATFORM_PLL 885 QORIQ_CLK_PLL_DIV(2)>, 886 <&clockgen QORIQ_CLK_PLATFORM_PLL 887 QORIQ_CLK_PLL_DIV(2)>; 888 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 889 dma-names = "tx", "rx"; 890 dmas = <&edma0 1 4>, 891 <&edma0 1 3>; 892 fsl,sai-asynchronous; 893 status = "disabled"; 894 }; 895 896 sai2: audio-controller@f110000 { 897 #sound-dai-cells = <0>; 898 compatible = "fsl,vf610-sai"; 899 reg = <0x0 0xf110000 0x0 0x10000>; 900 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; 901 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 902 QORIQ_CLK_PLL_DIV(2)>, 903 <&clockgen QORIQ_CLK_PLATFORM_PLL 904 QORIQ_CLK_PLL_DIV(2)>, 905 <&clockgen QORIQ_CLK_PLATFORM_PLL 906 QORIQ_CLK_PLL_DIV(2)>, 907 <&clockgen QORIQ_CLK_PLATFORM_PLL 908 QORIQ_CLK_PLL_DIV(2)>; 909 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 910 dma-names = "tx", "rx"; 911 dmas = <&edma0 1 6>, 912 <&edma0 1 5>; 913 fsl,sai-asynchronous; 914 status = "disabled"; 915 }; 916 917 sai3: audio-controller@f120000 { 918 #sound-dai-cells = <0>; 919 compatible = "fsl,vf610-sai"; 920 reg = <0x0 0xf120000 0x0 0x10000>; 921 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; 922 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 923 QORIQ_CLK_PLL_DIV(2)>, 924 <&clockgen QORIQ_CLK_PLATFORM_PLL 925 QORIQ_CLK_PLL_DIV(2)>, 926 <&clockgen QORIQ_CLK_PLATFORM_PLL 927 QORIQ_CLK_PLL_DIV(2)>, 928 <&clockgen QORIQ_CLK_PLATFORM_PLL 929 QORIQ_CLK_PLL_DIV(2)>; 930 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 931 dma-names = "tx", "rx"; 932 dmas = <&edma0 1 8>, 933 <&edma0 1 7>; 934 fsl,sai-asynchronous; 935 status = "disabled"; 936 }; 937 938 sai4: audio-controller@f130000 { 939 #sound-dai-cells = <0>; 940 compatible = "fsl,vf610-sai"; 941 reg = <0x0 0xf130000 0x0 0x10000>; 942 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; 943 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 944 QORIQ_CLK_PLL_DIV(2)>, 945 <&clockgen QORIQ_CLK_PLATFORM_PLL 946 QORIQ_CLK_PLL_DIV(2)>, 947 <&clockgen QORIQ_CLK_PLATFORM_PLL 948 QORIQ_CLK_PLL_DIV(2)>, 949 <&clockgen QORIQ_CLK_PLATFORM_PLL 950 QORIQ_CLK_PLL_DIV(2)>; 951 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 952 dma-names = "tx", "rx"; 953 dmas = <&edma0 1 10>, 954 <&edma0 1 9>; 955 fsl,sai-asynchronous; 956 status = "disabled"; 957 }; 958 959 sai5: audio-controller@f140000 { 960 #sound-dai-cells = <0>; 961 compatible = "fsl,vf610-sai"; 962 reg = <0x0 0xf140000 0x0 0x10000>; 963 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; 964 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 965 QORIQ_CLK_PLL_DIV(2)>, 966 <&clockgen QORIQ_CLK_PLATFORM_PLL 967 QORIQ_CLK_PLL_DIV(2)>, 968 <&clockgen QORIQ_CLK_PLATFORM_PLL 969 QORIQ_CLK_PLL_DIV(2)>, 970 <&clockgen QORIQ_CLK_PLATFORM_PLL 971 QORIQ_CLK_PLL_DIV(2)>; 972 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 973 dma-names = "tx", "rx"; 974 dmas = <&edma0 1 12>, 975 <&edma0 1 11>; 976 fsl,sai-asynchronous; 977 status = "disabled"; 978 }; 979 980 sai6: audio-controller@f150000 { 981 #sound-dai-cells = <0>; 982 compatible = "fsl,vf610-sai"; 983 reg = <0x0 0xf150000 0x0 0x10000>; 984 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; 985 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL 986 QORIQ_CLK_PLL_DIV(2)>, 987 <&clockgen QORIQ_CLK_PLATFORM_PLL 988 QORIQ_CLK_PLL_DIV(2)>, 989 <&clockgen QORIQ_CLK_PLATFORM_PLL 990 QORIQ_CLK_PLL_DIV(2)>, 991 <&clockgen QORIQ_CLK_PLATFORM_PLL 992 QORIQ_CLK_PLL_DIV(2)>; 993 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 994 dma-names = "tx", "rx"; 995 dmas = <&edma0 1 14>, 996 <&edma0 1 13>; 997 fsl,sai-asynchronous; 998 status = "disabled"; 999 }; 1000 1001 dpclk: clock-controller@f1f0000 { 1002 compatible = "fsl,ls1028a-plldig"; 1003 reg = <0x0 0xf1f0000 0x0 0x10000>; 1004 #clock-cells = <0>; 1005 clocks = <&osc_27m>; 1006 }; 1007 1008 tmu: tmu@1f80000 { 1009 compatible = "fsl,qoriq-tmu"; 1010 reg = <0x0 0x1f80000 0x0 0x10000>; 1011 interrupts = <0 23 0x4>; 1012 fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>; 1013 fsl,tmu-calibration = <0x00000000 0x00000024 1014 0x00000001 0x0000002b 1015 0x00000002 0x00000031 1016 0x00000003 0x00000038 1017 0x00000004 0x0000003f 1018 0x00000005 0x00000045 1019 0x00000006 0x0000004c 1020 0x00000007 0x00000053 1021 0x00000008 0x00000059 1022 0x00000009 0x00000060 1023 0x0000000a 0x00000066 1024 0x0000000b 0x0000006d 1025 1026 0x00010000 0x0000001c 1027 0x00010001 0x00000024 1028 0x00010002 0x0000002c 1029 0x00010003 0x00000035 1030 0x00010004 0x0000003d 1031 0x00010005 0x00000045 1032 0x00010006 0x0000004d 1033 0x00010007 0x00000055 1034 0x00010008 0x0000005e 1035 0x00010009 0x00000066 1036 0x0001000a 0x0000006e 1037 1038 0x00020000 0x00000018 1039 0x00020001 0x00000022 1040 0x00020002 0x0000002d 1041 0x00020003 0x00000038 1042 0x00020004 0x00000043 1043 0x00020005 0x0000004d 1044 0x00020006 0x00000058 1045 0x00020007 0x00000063 1046 0x00020008 0x0000006e 1047 1048 0x00030000 0x00000010 1049 0x00030001 0x0000001c 1050 0x00030002 0x00000029 1051 0x00030003 0x00000036 1052 0x00030004 0x00000042 1053 0x00030005 0x0000004f 1054 0x00030006 0x0000005b 1055 0x00030007 0x00000068>; 1056 little-endian; 1057 #thermal-sensor-cells = <1>; 1058 }; 1059 1060 pcie@1f0000000 { /* Integrated Endpoint Root Complex */ 1061 compatible = "pci-host-ecam-generic"; 1062 reg = <0x01 0xf0000000 0x0 0x100000>; 1063 #address-cells = <3>; 1064 #size-cells = <2>; 1065 msi-parent = <&its>; 1066 device_type = "pci"; 1067 bus-range = <0x0 0x0>; 1068 dma-coherent; 1069 msi-map = <0 &its 0x17 0xe>; 1070 iommu-map = <0 &smmu 0x17 0xe>; 1071 /* PF0-6 BAR0 - non-prefetchable memory */ 1072 ranges = <0x82000000 0x1 0xf8000000 0x1 0xf8000000 0x0 0x160000 1073 /* PF0-6 BAR2 - prefetchable memory */ 1074 0xc2000000 0x1 0xf8160000 0x1 0xf8160000 0x0 0x070000 1075 /* PF0: VF0-1 BAR0 - non-prefetchable memory */ 1076 0x82000000 0x1 0xf81d0000 0x1 0xf81d0000 0x0 0x020000 1077 /* PF0: VF0-1 BAR2 - prefetchable memory */ 1078 0xc2000000 0x1 0xf81f0000 0x1 0xf81f0000 0x0 0x020000 1079 /* PF1: VF0-1 BAR0 - non-prefetchable memory */ 1080 0x82000000 0x1 0xf8210000 0x1 0xf8210000 0x0 0x020000 1081 /* PF1: VF0-1 BAR2 - prefetchable memory */ 1082 0xc2000000 0x1 0xf8230000 0x1 0xf8230000 0x0 0x020000 1083 /* BAR4 (PF5) - non-prefetchable memory */ 1084 0x82000000 0x1 0xfc000000 0x1 0xfc000000 0x0 0x400000>; 1085 1086 enetc_port0: ethernet@0,0 { 1087 compatible = "fsl,enetc"; 1088 reg = <0x000000 0 0 0 0>; 1089 status = "disabled"; 1090 }; 1091 1092 enetc_port1: ethernet@0,1 { 1093 compatible = "fsl,enetc"; 1094 reg = <0x000100 0 0 0 0>; 1095 status = "disabled"; 1096 }; 1097 1098 enetc_port2: ethernet@0,2 { 1099 compatible = "fsl,enetc"; 1100 reg = <0x000200 0 0 0 0>; 1101 phy-mode = "internal"; 1102 status = "disabled"; 1103 1104 fixed-link { 1105 speed = <2500>; 1106 full-duplex; 1107 pause; 1108 }; 1109 }; 1110 1111 enetc_mdio_pf3: mdio@0,3 { 1112 compatible = "fsl,enetc-mdio"; 1113 reg = <0x000300 0 0 0 0>; 1114 #address-cells = <1>; 1115 #size-cells = <0>; 1116 }; 1117 1118 ethernet@0,4 { 1119 compatible = "fsl,enetc-ptp"; 1120 reg = <0x000400 0 0 0 0>; 1121 clocks = <&clockgen QORIQ_CLK_HWACCEL 3>; 1122 little-endian; 1123 fsl,extts-fifo; 1124 }; 1125 1126 mscc_felix: ethernet-switch@0,5 { 1127 reg = <0x000500 0 0 0 0>; 1128 /* IEP INT_B */ 1129 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; 1130 status = "disabled"; 1131 1132 mscc_felix_ports: ports { 1133 #address-cells = <1>; 1134 #size-cells = <0>; 1135 1136 /* External ports */ 1137 mscc_felix_port0: port@0 { 1138 reg = <0>; 1139 status = "disabled"; 1140 }; 1141 1142 mscc_felix_port1: port@1 { 1143 reg = <1>; 1144 status = "disabled"; 1145 }; 1146 1147 mscc_felix_port2: port@2 { 1148 reg = <2>; 1149 status = "disabled"; 1150 }; 1151 1152 mscc_felix_port3: port@3 { 1153 reg = <3>; 1154 status = "disabled"; 1155 }; 1156 1157 /* Internal ports */ 1158 mscc_felix_port4: port@4 { 1159 reg = <4>; 1160 phy-mode = "internal"; 1161 ethernet = <&enetc_port2>; 1162 status = "disabled"; 1163 1164 fixed-link { 1165 speed = <2500>; 1166 full-duplex; 1167 pause; 1168 }; 1169 }; 1170 1171 mscc_felix_port5: port@5 { 1172 reg = <5>; 1173 phy-mode = "internal"; 1174 ethernet = <&enetc_port3>; 1175 status = "disabled"; 1176 1177 fixed-link { 1178 speed = <1000>; 1179 full-duplex; 1180 pause; 1181 }; 1182 }; 1183 }; 1184 }; 1185 1186 enetc_port3: ethernet@0,6 { 1187 compatible = "fsl,enetc"; 1188 reg = <0x000600 0 0 0 0>; 1189 phy-mode = "internal"; 1190 status = "disabled"; 1191 1192 fixed-link { 1193 speed = <1000>; 1194 full-duplex; 1195 pause; 1196 }; 1197 }; 1198 1199 rcec@1f,0 { 1200 reg = <0x00f800 0 0 0 0>; 1201 /* IEP INT_A */ 1202 interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; 1203 }; 1204 }; 1205 1206 /* Integrated Endpoint Register Block */ 1207 ierb@1f0800000 { 1208 compatible = "fsl,ls1028a-enetc-ierb"; 1209 reg = <0x01 0xf0800000 0x0 0x10000>; 1210 }; 1211 1212 pwm0: pwm@2800000 { 1213 compatible = "fsl,vf610-ftm-pwm"; 1214 #pwm-cells = <3>; 1215 reg = <0x0 0x2800000 0x0 0x10000>; 1216 clock-names = "ftm_sys", "ftm_ext", 1217 "ftm_fix", "ftm_cnt_clk_en"; 1218 clocks = <&clockgen 4 1>, <&clockgen 4 1>, 1219 <&rtc_clk>, <&clockgen 4 1>; 1220 status = "disabled"; 1221 }; 1222 1223 pwm1: pwm@2810000 { 1224 compatible = "fsl,vf610-ftm-pwm"; 1225 #pwm-cells = <3>; 1226 reg = <0x0 0x2810000 0x0 0x10000>; 1227 clock-names = "ftm_sys", "ftm_ext", 1228 "ftm_fix", "ftm_cnt_clk_en"; 1229 clocks = <&clockgen 4 1>, <&clockgen 4 1>, 1230 <&rtc_clk>, <&clockgen 4 1>; 1231 status = "disabled"; 1232 }; 1233 1234 pwm2: pwm@2820000 { 1235 compatible = "fsl,vf610-ftm-pwm"; 1236 #pwm-cells = <3>; 1237 reg = <0x0 0x2820000 0x0 0x10000>; 1238 clock-names = "ftm_sys", "ftm_ext", 1239 "ftm_fix", "ftm_cnt_clk_en"; 1240 clocks = <&clockgen 4 1>, <&clockgen 4 1>, 1241 <&rtc_clk>, <&clockgen 4 1>; 1242 status = "disabled"; 1243 }; 1244 1245 pwm3: pwm@2830000 { 1246 compatible = "fsl,vf610-ftm-pwm"; 1247 #pwm-cells = <3>; 1248 reg = <0x0 0x2830000 0x0 0x10000>; 1249 clock-names = "ftm_sys", "ftm_ext", 1250 "ftm_fix", "ftm_cnt_clk_en"; 1251 clocks = <&clockgen 4 1>, <&clockgen 4 1>, 1252 <&rtc_clk>, <&clockgen 4 1>; 1253 status = "disabled"; 1254 }; 1255 1256 pwm4: pwm@2840000 { 1257 compatible = "fsl,vf610-ftm-pwm"; 1258 #pwm-cells = <3>; 1259 reg = <0x0 0x2840000 0x0 0x10000>; 1260 clock-names = "ftm_sys", "ftm_ext", 1261 "ftm_fix", "ftm_cnt_clk_en"; 1262 clocks = <&clockgen 4 1>, <&clockgen 4 1>, 1263 <&rtc_clk>, <&clockgen 4 1>; 1264 status = "disabled"; 1265 }; 1266 1267 pwm5: pwm@2850000 { 1268 compatible = "fsl,vf610-ftm-pwm"; 1269 #pwm-cells = <3>; 1270 reg = <0x0 0x2850000 0x0 0x10000>; 1271 clock-names = "ftm_sys", "ftm_ext", 1272 "ftm_fix", "ftm_cnt_clk_en"; 1273 clocks = <&clockgen 4 1>, <&clockgen 4 1>, 1274 <&rtc_clk>, <&clockgen 4 1>; 1275 status = "disabled"; 1276 }; 1277 1278 pwm6: pwm@2860000 { 1279 compatible = "fsl,vf610-ftm-pwm"; 1280 #pwm-cells = <3>; 1281 reg = <0x0 0x2860000 0x0 0x10000>; 1282 clock-names = "ftm_sys", "ftm_ext", 1283 "ftm_fix", "ftm_cnt_clk_en"; 1284 clocks = <&clockgen 4 1>, <&clockgen 4 1>, 1285 <&rtc_clk>, <&clockgen 4 1>; 1286 status = "disabled"; 1287 }; 1288 1289 pwm7: pwm@2870000 { 1290 compatible = "fsl,vf610-ftm-pwm"; 1291 #pwm-cells = <3>; 1292 reg = <0x0 0x2870000 0x0 0x10000>; 1293 clock-names = "ftm_sys", "ftm_ext", 1294 "ftm_fix", "ftm_cnt_clk_en"; 1295 clocks = <&clockgen 4 1>, <&clockgen 4 1>, 1296 <&rtc_clk>, <&clockgen 4 1>; 1297 status = "disabled"; 1298 }; 1299 1300 rcpm: power-controller@1e34040 { 1301 compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+"; 1302 reg = <0x0 0x1e34040 0x0 0x1c>; 1303 #fsl,rcpm-wakeup-cells = <7>; 1304 little-endian; 1305 }; 1306 1307 ftm_alarm0: timer@2800000 { 1308 compatible = "fsl,ls1028a-ftm-alarm"; 1309 reg = <0x0 0x2800000 0x0 0x10000>; 1310 fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>; 1311 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; 1312 status = "disabled"; 1313 }; 1314 1315 ftm_alarm1: timer@2810000 { 1316 compatible = "fsl,ls1028a-ftm-alarm"; 1317 reg = <0x0 0x2810000 0x0 0x10000>; 1318 fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>; 1319 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; 1320 status = "disabled"; 1321 }; 1322 }; 1323 1324}; 1325