1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Device Tree Include file for NXP Layerscape-1028A family SoC. 4 * 5 * Copyright 2018 NXP 6 * 7 * Harninder Rai <harninder.rai@nxp.com> 8 * 9 */ 10 11#include <dt-bindings/interrupt-controller/arm-gic.h> 12#include <dt-bindings/thermal/thermal.h> 13 14/ { 15 compatible = "fsl,ls1028a"; 16 interrupt-parent = <&gic>; 17 #address-cells = <2>; 18 #size-cells = <2>; 19 20 cpus { 21 #address-cells = <1>; 22 #size-cells = <0>; 23 24 cpu0: cpu@0 { 25 device_type = "cpu"; 26 compatible = "arm,cortex-a72"; 27 reg = <0x0>; 28 enable-method = "psci"; 29 clocks = <&clockgen 1 0>; 30 next-level-cache = <&l2>; 31 cpu-idle-states = <&CPU_PW20>; 32 #cooling-cells = <2>; 33 }; 34 35 cpu1: cpu@1 { 36 device_type = "cpu"; 37 compatible = "arm,cortex-a72"; 38 reg = <0x1>; 39 enable-method = "psci"; 40 clocks = <&clockgen 1 0>; 41 next-level-cache = <&l2>; 42 cpu-idle-states = <&CPU_PW20>; 43 #cooling-cells = <2>; 44 }; 45 46 l2: l2-cache { 47 compatible = "cache"; 48 }; 49 }; 50 51 idle-states { 52 /* 53 * PSCI node is not added default, U-boot will add missing 54 * parts if it determines to use PSCI. 55 */ 56 entry-method = "psci"; 57 58 CPU_PW20: cpu-pw20 { 59 compatible = "arm,idle-state"; 60 idle-state-name = "PW20"; 61 arm,psci-suspend-param = <0x0>; 62 entry-latency-us = <2000>; 63 exit-latency-us = <2000>; 64 min-residency-us = <6000>; 65 }; 66 }; 67 68 sysclk: clock-sysclk { 69 compatible = "fixed-clock"; 70 #clock-cells = <0>; 71 clock-frequency = <100000000>; 72 clock-output-names = "sysclk"; 73 }; 74 75 osc_27m: clock-osc-27m { 76 compatible = "fixed-clock"; 77 #clock-cells = <0>; 78 clock-frequency = <27000000>; 79 clock-output-names = "phy_27m"; 80 }; 81 82 dpclk: clock-controller@f1f0000 { 83 compatible = "fsl,ls1028a-plldig"; 84 reg = <0x0 0xf1f0000 0x0 0xffff>; 85 #clock-cells = <0>; 86 clocks = <&osc_27m>; 87 }; 88 89 reboot { 90 compatible ="syscon-reboot"; 91 regmap = <&rst>; 92 offset = <0xb0>; 93 mask = <0x02>; 94 }; 95 96 timer { 97 compatible = "arm,armv8-timer"; 98 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | 99 IRQ_TYPE_LEVEL_LOW)>, 100 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | 101 IRQ_TYPE_LEVEL_LOW)>, 102 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | 103 IRQ_TYPE_LEVEL_LOW)>, 104 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | 105 IRQ_TYPE_LEVEL_LOW)>; 106 }; 107 108 pmu { 109 compatible = "arm,cortex-a72-pmu"; 110 interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; 111 }; 112 113 gic: interrupt-controller@6000000 { 114 compatible= "arm,gic-v3"; 115 #address-cells = <2>; 116 #size-cells = <2>; 117 ranges; 118 reg= <0x0 0x06000000 0 0x10000>, /* GIC Dist */ 119 <0x0 0x06040000 0 0x40000>; /* GIC Redistributor */ 120 #interrupt-cells= <3>; 121 interrupt-controller; 122 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) | 123 IRQ_TYPE_LEVEL_LOW)>; 124 its: gic-its@6020000 { 125 compatible = "arm,gic-v3-its"; 126 msi-controller; 127 reg = <0x0 0x06020000 0 0x20000>;/* GIC Translater */ 128 }; 129 }; 130 131 thermal-zones { 132 core-cluster { 133 polling-delay-passive = <1000>; 134 polling-delay = <5000>; 135 thermal-sensors = <&tmu 0>; 136 137 trips { 138 core_cluster_alert: core-cluster-alert { 139 temperature = <85000>; 140 hysteresis = <2000>; 141 type = "passive"; 142 }; 143 144 core_cluster_crit: core-cluster-crit { 145 temperature = <95000>; 146 hysteresis = <2000>; 147 type = "critical"; 148 }; 149 }; 150 151 cooling-maps { 152 map0 { 153 trip = <&core_cluster_alert>; 154 cooling-device = 155 <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 156 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 157 }; 158 }; 159 }; 160 }; 161 162 soc: soc { 163 compatible = "simple-bus"; 164 #address-cells = <2>; 165 #size-cells = <2>; 166 ranges; 167 168 ddr: memory-controller@1080000 { 169 compatible = "fsl,qoriq-memory-controller"; 170 reg = <0x0 0x1080000 0x0 0x1000>; 171 interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; 172 big-endian; 173 }; 174 175 dcfg: syscon@1e00000 { 176 compatible = "fsl,ls1028a-dcfg", "syscon"; 177 reg = <0x0 0x1e00000 0x0 0x10000>; 178 little-endian; 179 }; 180 181 rst: syscon@1e60000 { 182 compatible = "syscon"; 183 reg = <0x0 0x1e60000 0x0 0x10000>; 184 little-endian; 185 }; 186 187 scfg: syscon@1fc0000 { 188 compatible = "fsl,ls1028a-scfg", "syscon"; 189 reg = <0x0 0x1fc0000 0x0 0x10000>; 190 big-endian; 191 }; 192 193 clockgen: clock-controller@1300000 { 194 compatible = "fsl,ls1028a-clockgen"; 195 reg = <0x0 0x1300000 0x0 0xa0000>; 196 #clock-cells = <2>; 197 clocks = <&sysclk>; 198 }; 199 200 i2c0: i2c@2000000 { 201 compatible = "fsl,vf610-i2c"; 202 #address-cells = <1>; 203 #size-cells = <0>; 204 reg = <0x0 0x2000000 0x0 0x10000>; 205 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; 206 clocks = <&clockgen 4 3>; 207 status = "disabled"; 208 }; 209 210 i2c1: i2c@2010000 { 211 compatible = "fsl,vf610-i2c"; 212 #address-cells = <1>; 213 #size-cells = <0>; 214 reg = <0x0 0x2010000 0x0 0x10000>; 215 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; 216 clocks = <&clockgen 4 3>; 217 status = "disabled"; 218 }; 219 220 i2c2: i2c@2020000 { 221 compatible = "fsl,vf610-i2c"; 222 #address-cells = <1>; 223 #size-cells = <0>; 224 reg = <0x0 0x2020000 0x0 0x10000>; 225 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; 226 clocks = <&clockgen 4 3>; 227 status = "disabled"; 228 }; 229 230 i2c3: i2c@2030000 { 231 compatible = "fsl,vf610-i2c"; 232 #address-cells = <1>; 233 #size-cells = <0>; 234 reg = <0x0 0x2030000 0x0 0x10000>; 235 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; 236 clocks = <&clockgen 4 3>; 237 status = "disabled"; 238 }; 239 240 i2c4: i2c@2040000 { 241 compatible = "fsl,vf610-i2c"; 242 #address-cells = <1>; 243 #size-cells = <0>; 244 reg = <0x0 0x2040000 0x0 0x10000>; 245 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; 246 clocks = <&clockgen 4 3>; 247 status = "disabled"; 248 }; 249 250 i2c5: i2c@2050000 { 251 compatible = "fsl,vf610-i2c"; 252 #address-cells = <1>; 253 #size-cells = <0>; 254 reg = <0x0 0x2050000 0x0 0x10000>; 255 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; 256 clocks = <&clockgen 4 3>; 257 status = "disabled"; 258 }; 259 260 i2c6: i2c@2060000 { 261 compatible = "fsl,vf610-i2c"; 262 #address-cells = <1>; 263 #size-cells = <0>; 264 reg = <0x0 0x2060000 0x0 0x10000>; 265 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; 266 clocks = <&clockgen 4 3>; 267 status = "disabled"; 268 }; 269 270 i2c7: i2c@2070000 { 271 compatible = "fsl,vf610-i2c"; 272 #address-cells = <1>; 273 #size-cells = <0>; 274 reg = <0x0 0x2070000 0x0 0x10000>; 275 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; 276 clocks = <&clockgen 4 3>; 277 status = "disabled"; 278 }; 279 280 fspi: spi@20c0000 { 281 compatible = "nxp,lx2160a-fspi"; 282 #address-cells = <1>; 283 #size-cells = <0>; 284 reg = <0x0 0x20c0000 0x0 0x10000>, 285 <0x0 0x20000000 0x0 0x10000000>; 286 reg-names = "fspi_base", "fspi_mmap"; 287 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; 288 clocks = <&clockgen 4 3>, <&clockgen 4 3>; 289 clock-names = "fspi_en", "fspi"; 290 status = "disabled"; 291 }; 292 293 dspi0: spi@2100000 { 294 compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi"; 295 #address-cells = <1>; 296 #size-cells = <0>; 297 reg = <0x0 0x2100000 0x0 0x10000>; 298 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; 299 clock-names = "dspi"; 300 clocks = <&clockgen 4 1>; 301 spi-num-chipselects = <4>; 302 little-endian; 303 status = "disabled"; 304 }; 305 306 dspi1: spi@2110000 { 307 compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi"; 308 #address-cells = <1>; 309 #size-cells = <0>; 310 reg = <0x0 0x2110000 0x0 0x10000>; 311 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; 312 clock-names = "dspi"; 313 clocks = <&clockgen 4 1>; 314 spi-num-chipselects = <4>; 315 little-endian; 316 status = "disabled"; 317 }; 318 319 dspi2: spi@2120000 { 320 compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi"; 321 #address-cells = <1>; 322 #size-cells = <0>; 323 reg = <0x0 0x2120000 0x0 0x10000>; 324 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; 325 clock-names = "dspi"; 326 clocks = <&clockgen 4 1>; 327 spi-num-chipselects = <3>; 328 little-endian; 329 status = "disabled"; 330 }; 331 332 esdhc: mmc@2140000 { 333 compatible = "fsl,ls1028a-esdhc", "fsl,esdhc"; 334 reg = <0x0 0x2140000 0x0 0x10000>; 335 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; 336 clock-frequency = <0>; /* fixed up by bootloader */ 337 clocks = <&clockgen 2 1>; 338 voltage-ranges = <1800 1800 3300 3300>; 339 sdhci,auto-cmd12; 340 little-endian; 341 bus-width = <4>; 342 status = "disabled"; 343 }; 344 345 esdhc1: mmc@2150000 { 346 compatible = "fsl,ls1028a-esdhc", "fsl,esdhc"; 347 reg = <0x0 0x2150000 0x0 0x10000>; 348 interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; 349 clock-frequency = <0>; /* fixed up by bootloader */ 350 clocks = <&clockgen 2 1>; 351 voltage-ranges = <1800 1800 3300 3300>; 352 sdhci,auto-cmd12; 353 broken-cd; 354 little-endian; 355 bus-width = <4>; 356 status = "disabled"; 357 }; 358 359 duart0: serial@21c0500 { 360 compatible = "fsl,ns16550", "ns16550a"; 361 reg = <0x00 0x21c0500 0x0 0x100>; 362 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; 363 clocks = <&clockgen 4 1>; 364 status = "disabled"; 365 }; 366 367 duart1: serial@21c0600 { 368 compatible = "fsl,ns16550", "ns16550a"; 369 reg = <0x00 0x21c0600 0x0 0x100>; 370 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; 371 clocks = <&clockgen 4 1>; 372 status = "disabled"; 373 }; 374 375 376 lpuart0: serial@2260000 { 377 compatible = "fsl,ls1028a-lpuart"; 378 reg = <0x0 0x2260000 0x0 0x1000>; 379 interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; 380 clocks = <&clockgen 4 1>; 381 clock-names = "ipg"; 382 dma-names = "rx","tx"; 383 dmas = <&edma0 1 32>, 384 <&edma0 1 33>; 385 status = "disabled"; 386 }; 387 388 lpuart1: serial@2270000 { 389 compatible = "fsl,ls1028a-lpuart"; 390 reg = <0x0 0x2270000 0x0 0x1000>; 391 interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; 392 clocks = <&clockgen 4 1>; 393 clock-names = "ipg"; 394 dma-names = "rx","tx"; 395 dmas = <&edma0 1 30>, 396 <&edma0 1 31>; 397 status = "disabled"; 398 }; 399 400 lpuart2: serial@2280000 { 401 compatible = "fsl,ls1028a-lpuart"; 402 reg = <0x0 0x2280000 0x0 0x1000>; 403 interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; 404 clocks = <&clockgen 4 1>; 405 clock-names = "ipg"; 406 dma-names = "rx","tx"; 407 dmas = <&edma0 1 28>, 408 <&edma0 1 29>; 409 status = "disabled"; 410 }; 411 412 lpuart3: serial@2290000 { 413 compatible = "fsl,ls1028a-lpuart"; 414 reg = <0x0 0x2290000 0x0 0x1000>; 415 interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; 416 clocks = <&clockgen 4 1>; 417 clock-names = "ipg"; 418 dma-names = "rx","tx"; 419 dmas = <&edma0 1 26>, 420 <&edma0 1 27>; 421 status = "disabled"; 422 }; 423 424 lpuart4: serial@22a0000 { 425 compatible = "fsl,ls1028a-lpuart"; 426 reg = <0x0 0x22a0000 0x0 0x1000>; 427 interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>; 428 clocks = <&clockgen 4 1>; 429 clock-names = "ipg"; 430 dma-names = "rx","tx"; 431 dmas = <&edma0 1 24>, 432 <&edma0 1 25>; 433 status = "disabled"; 434 }; 435 436 lpuart5: serial@22b0000 { 437 compatible = "fsl,ls1028a-lpuart"; 438 reg = <0x0 0x22b0000 0x0 0x1000>; 439 interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>; 440 clocks = <&clockgen 4 1>; 441 clock-names = "ipg"; 442 dma-names = "rx","tx"; 443 dmas = <&edma0 1 22>, 444 <&edma0 1 23>; 445 status = "disabled"; 446 }; 447 448 edma0: dma-controller@22c0000 { 449 #dma-cells = <2>; 450 compatible = "fsl,ls1028a-edma"; 451 reg = <0x0 0x22c0000 0x0 0x10000>, 452 <0x0 0x22d0000 0x0 0x10000>, 453 <0x0 0x22e0000 0x0 0x10000>; 454 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, 455 <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; 456 interrupt-names = "edma-tx", "edma-err"; 457 dma-channels = <32>; 458 clock-names = "dmamux0", "dmamux1"; 459 clocks = <&clockgen 4 1>, 460 <&clockgen 4 1>; 461 }; 462 463 gpio1: gpio@2300000 { 464 compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio"; 465 reg = <0x0 0x2300000 0x0 0x10000>; 466 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; 467 gpio-controller; 468 #gpio-cells = <2>; 469 interrupt-controller; 470 #interrupt-cells = <2>; 471 little-endian; 472 }; 473 474 gpio2: gpio@2310000 { 475 compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio"; 476 reg = <0x0 0x2310000 0x0 0x10000>; 477 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; 478 gpio-controller; 479 #gpio-cells = <2>; 480 interrupt-controller; 481 #interrupt-cells = <2>; 482 little-endian; 483 }; 484 485 gpio3: gpio@2320000 { 486 compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio"; 487 reg = <0x0 0x2320000 0x0 0x10000>; 488 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; 489 gpio-controller; 490 #gpio-cells = <2>; 491 interrupt-controller; 492 #interrupt-cells = <2>; 493 little-endian; 494 }; 495 496 usb0: usb@3100000 { 497 compatible = "fsl,ls1028a-dwc3", "snps,dwc3"; 498 reg = <0x0 0x3100000 0x0 0x10000>; 499 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; 500 dr_mode = "host"; 501 snps,dis_rxdet_inp3_quirk; 502 snps,quirk-frame-length-adjustment = <0x20>; 503 snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; 504 }; 505 506 usb1: usb@3110000 { 507 compatible = "fsl,ls1028a-dwc3", "snps,dwc3"; 508 reg = <0x0 0x3110000 0x0 0x10000>; 509 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; 510 dr_mode = "host"; 511 snps,dis_rxdet_inp3_quirk; 512 snps,quirk-frame-length-adjustment = <0x20>; 513 snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; 514 }; 515 516 sata: sata@3200000 { 517 compatible = "fsl,ls1028a-ahci"; 518 reg = <0x0 0x3200000 0x0 0x10000>, 519 <0x7 0x100520 0x0 0x4>; 520 reg-names = "ahci", "sata-ecc"; 521 interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; 522 clocks = <&clockgen 4 1>; 523 status = "disabled"; 524 }; 525 526 pcie@3400000 { 527 compatible = "fsl,ls1028a-pcie"; 528 reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ 529 0x80 0x00000000 0x0 0x00002000>; /* configuration space */ 530 reg-names = "regs", "config"; 531 interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ 532 <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ 533 interrupt-names = "pme", "aer"; 534 #address-cells = <3>; 535 #size-cells = <2>; 536 device_type = "pci"; 537 dma-coherent; 538 num-viewport = <8>; 539 bus-range = <0x0 0xff>; 540 ranges = <0x81000000 0x0 0x00000000 0x80 0x00010000 0x0 0x00010000 /* downstream I/O */ 541 0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ 542 msi-parent = <&its>; 543 #interrupt-cells = <1>; 544 interrupt-map-mask = <0 0 0 7>; 545 interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, 546 <0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, 547 <0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, 548 <0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; 549 iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ 550 status = "disabled"; 551 }; 552 553 pcie@3500000 { 554 compatible = "fsl,ls1028a-pcie"; 555 reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ 556 0x88 0x00000000 0x0 0x00002000>; /* configuration space */ 557 reg-names = "regs", "config"; 558 interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, 559 <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; 560 interrupt-names = "pme", "aer"; 561 #address-cells = <3>; 562 #size-cells = <2>; 563 device_type = "pci"; 564 dma-coherent; 565 num-viewport = <8>; 566 bus-range = <0x0 0xff>; 567 ranges = <0x81000000 0x0 0x00000000 0x88 0x00010000 0x0 0x00010000 /* downstream I/O */ 568 0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ 569 msi-parent = <&its>; 570 #interrupt-cells = <1>; 571 interrupt-map-mask = <0 0 0 7>; 572 interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, 573 <0000 0 0 2 &gic 0 0 GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, 574 <0000 0 0 3 &gic 0 0 GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, 575 <0000 0 0 4 &gic 0 0 GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; 576 iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ 577 status = "disabled"; 578 }; 579 580 smmu: iommu@5000000 { 581 compatible = "arm,mmu-500"; 582 reg = <0 0x5000000 0 0x800000>; 583 #global-interrupts = <8>; 584 #iommu-cells = <1>; 585 stream-match-mask = <0x7c00>; 586 /* global secure fault */ 587 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, 588 /* combined secure interrupt */ 589 <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, 590 /* global non-secure fault */ 591 <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, 592 /* combined non-secure interrupt */ 593 <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, 594 /* performance counter interrupts 0-7 */ 595 <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, 596 <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, 597 /* per context interrupt, 64 interrupts */ 598 <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, 599 <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, 600 <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, 601 <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, 602 <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, 603 <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, 604 <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, 605 <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, 606 <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, 607 <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, 608 <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, 609 <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, 610 <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>, 611 <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>, 612 <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>, 613 <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>, 614 <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>, 615 <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, 616 <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, 617 <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, 618 <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, 619 <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, 620 <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, 621 <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, 622 <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>, 623 <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, 624 <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, 625 <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, 626 <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, 627 <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, 628 <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, 629 <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; 630 }; 631 632 crypto: crypto@8000000 { 633 compatible = "fsl,sec-v5.0", "fsl,sec-v4.0"; 634 fsl,sec-era = <10>; 635 #address-cells = <1>; 636 #size-cells = <1>; 637 ranges = <0x0 0x00 0x8000000 0x100000>; 638 reg = <0x00 0x8000000 0x0 0x100000>; 639 interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; 640 dma-coherent; 641 642 sec_jr0: jr@10000 { 643 compatible = "fsl,sec-v5.0-job-ring", 644 "fsl,sec-v4.0-job-ring"; 645 reg = <0x10000 0x10000>; 646 interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; 647 }; 648 649 sec_jr1: jr@20000 { 650 compatible = "fsl,sec-v5.0-job-ring", 651 "fsl,sec-v4.0-job-ring"; 652 reg = <0x20000 0x10000>; 653 interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; 654 }; 655 656 sec_jr2: jr@30000 { 657 compatible = "fsl,sec-v5.0-job-ring", 658 "fsl,sec-v4.0-job-ring"; 659 reg = <0x30000 0x10000>; 660 interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; 661 }; 662 663 sec_jr3: jr@40000 { 664 compatible = "fsl,sec-v5.0-job-ring", 665 "fsl,sec-v4.0-job-ring"; 666 reg = <0x40000 0x10000>; 667 interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; 668 }; 669 }; 670 671 qdma: dma-controller@8380000 { 672 compatible = "fsl,ls1028a-qdma", "fsl,ls1021a-qdma"; 673 reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */ 674 <0x0 0x8390000 0x0 0x10000>, /* Status regs */ 675 <0x0 0x83a0000 0x0 0x40000>; /* Block regs */ 676 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, 677 <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, 678 <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, 679 <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, 680 <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>; 681 interrupt-names = "qdma-error", "qdma-queue0", 682 "qdma-queue1", "qdma-queue2", "qdma-queue3"; 683 dma-channels = <8>; 684 block-number = <1>; 685 block-offset = <0x10000>; 686 fsl,dma-queues = <2>; 687 status-sizes = <64>; 688 queue-sizes = <64 64>; 689 }; 690 691 cluster1_core0_watchdog: watchdog@c000000 { 692 compatible = "arm,sp805", "arm,primecell"; 693 reg = <0x0 0xc000000 0x0 0x1000>; 694 clocks = <&clockgen 4 15>, <&clockgen 4 15>; 695 clock-names = "apb_pclk", "wdog_clk"; 696 }; 697 698 cluster1_core1_watchdog: watchdog@c010000 { 699 compatible = "arm,sp805", "arm,primecell"; 700 reg = <0x0 0xc010000 0x0 0x1000>; 701 clocks = <&clockgen 4 15>, <&clockgen 4 15>; 702 clock-names = "apb_pclk", "wdog_clk"; 703 }; 704 705 sai1: audio-controller@f100000 { 706 #sound-dai-cells = <0>; 707 compatible = "fsl,vf610-sai"; 708 reg = <0x0 0xf100000 0x0 0x10000>; 709 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; 710 clocks = <&clockgen 4 1>, <&clockgen 4 1>, 711 <&clockgen 4 1>, <&clockgen 4 1>; 712 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 713 dma-names = "tx", "rx"; 714 dmas = <&edma0 1 4>, 715 <&edma0 1 3>; 716 fsl,sai-asynchronous; 717 status = "disabled"; 718 }; 719 720 sai2: audio-controller@f110000 { 721 #sound-dai-cells = <0>; 722 compatible = "fsl,vf610-sai"; 723 reg = <0x0 0xf110000 0x0 0x10000>; 724 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; 725 clocks = <&clockgen 4 1>, <&clockgen 4 1>, 726 <&clockgen 4 1>, <&clockgen 4 1>; 727 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 728 dma-names = "tx", "rx"; 729 dmas = <&edma0 1 6>, 730 <&edma0 1 5>; 731 fsl,sai-asynchronous; 732 status = "disabled"; 733 }; 734 735 sai3: audio-controller@f120000 { 736 #sound-dai-cells = <0>; 737 compatible = "fsl,vf610-sai"; 738 reg = <0x0 0xf120000 0x0 0x10000>; 739 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; 740 clocks = <&clockgen 4 1>, <&clockgen 4 1>, 741 <&clockgen 4 1>, <&clockgen 4 1>; 742 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 743 dma-names = "tx", "rx"; 744 dmas = <&edma0 1 8>, 745 <&edma0 1 7>; 746 fsl,sai-asynchronous; 747 status = "disabled"; 748 }; 749 750 sai4: audio-controller@f130000 { 751 #sound-dai-cells = <0>; 752 compatible = "fsl,vf610-sai"; 753 reg = <0x0 0xf130000 0x0 0x10000>; 754 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; 755 clocks = <&clockgen 4 1>, <&clockgen 4 1>, 756 <&clockgen 4 1>, <&clockgen 4 1>; 757 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 758 dma-names = "tx", "rx"; 759 dmas = <&edma0 1 10>, 760 <&edma0 1 9>; 761 fsl,sai-asynchronous; 762 status = "disabled"; 763 }; 764 765 sai5: audio-controller@f140000 { 766 #sound-dai-cells = <0>; 767 compatible = "fsl,vf610-sai"; 768 reg = <0x0 0xf140000 0x0 0x10000>; 769 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; 770 clocks = <&clockgen 4 1>, <&clockgen 4 1>, 771 <&clockgen 4 1>, <&clockgen 4 1>; 772 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 773 dma-names = "tx", "rx"; 774 dmas = <&edma0 1 12>, 775 <&edma0 1 11>; 776 fsl,sai-asynchronous; 777 status = "disabled"; 778 }; 779 780 sai6: audio-controller@f150000 { 781 #sound-dai-cells = <0>; 782 compatible = "fsl,vf610-sai"; 783 reg = <0x0 0xf150000 0x0 0x10000>; 784 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; 785 clocks = <&clockgen 4 1>, <&clockgen 4 1>, 786 <&clockgen 4 1>, <&clockgen 4 1>; 787 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 788 dma-names = "tx", "rx"; 789 dmas = <&edma0 1 14>, 790 <&edma0 1 13>; 791 fsl,sai-asynchronous; 792 status = "disabled"; 793 }; 794 795 tmu: tmu@1f80000 { 796 compatible = "fsl,qoriq-tmu"; 797 reg = <0x0 0x1f80000 0x0 0x10000>; 798 interrupts = <0 23 0x4>; 799 fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>; 800 fsl,tmu-calibration = <0x00000000 0x00000024 801 0x00000001 0x0000002b 802 0x00000002 0x00000031 803 0x00000003 0x00000038 804 0x00000004 0x0000003f 805 0x00000005 0x00000045 806 0x00000006 0x0000004c 807 0x00000007 0x00000053 808 0x00000008 0x00000059 809 0x00000009 0x00000060 810 0x0000000a 0x00000066 811 0x0000000b 0x0000006d 812 813 0x00010000 0x0000001c 814 0x00010001 0x00000024 815 0x00010002 0x0000002c 816 0x00010003 0x00000035 817 0x00010004 0x0000003d 818 0x00010005 0x00000045 819 0x00010006 0x0000004d 820 0x00010007 0x00000055 821 0x00010008 0x0000005e 822 0x00010009 0x00000066 823 0x0001000a 0x0000006e 824 825 0x00020000 0x00000018 826 0x00020001 0x00000022 827 0x00020002 0x0000002d 828 0x00020003 0x00000038 829 0x00020004 0x00000043 830 0x00020005 0x0000004d 831 0x00020006 0x00000058 832 0x00020007 0x00000063 833 0x00020008 0x0000006e 834 835 0x00030000 0x00000010 836 0x00030001 0x0000001c 837 0x00030002 0x00000029 838 0x00030003 0x00000036 839 0x00030004 0x00000042 840 0x00030005 0x0000004f 841 0x00030006 0x0000005b 842 0x00030007 0x00000068>; 843 little-endian; 844 #thermal-sensor-cells = <1>; 845 }; 846 847 pcie@1f0000000 { /* Integrated Endpoint Root Complex */ 848 compatible = "pci-host-ecam-generic"; 849 reg = <0x01 0xf0000000 0x0 0x100000>; 850 #address-cells = <3>; 851 #size-cells = <2>; 852 msi-parent = <&its>; 853 device_type = "pci"; 854 bus-range = <0x0 0x0>; 855 dma-coherent; 856 msi-map = <0 &its 0x17 0xe>; 857 iommu-map = <0 &smmu 0x17 0xe>; 858 /* PF0-6 BAR0 - non-prefetchable memory */ 859 ranges = <0x82000000 0x0 0x00000000 0x1 0xf8000000 0x0 0x160000 860 /* PF0-6 BAR2 - prefetchable memory */ 861 0xc2000000 0x0 0x00000000 0x1 0xf8160000 0x0 0x070000 862 /* PF0: VF0-1 BAR0 - non-prefetchable memory */ 863 0x82000000 0x0 0x00000000 0x1 0xf81d0000 0x0 0x020000 864 /* PF0: VF0-1 BAR2 - prefetchable memory */ 865 0xc2000000 0x0 0x00000000 0x1 0xf81f0000 0x0 0x020000 866 /* PF1: VF0-1 BAR0 - non-prefetchable memory */ 867 0x82000000 0x0 0x00000000 0x1 0xf8210000 0x0 0x020000 868 /* PF1: VF0-1 BAR2 - prefetchable memory */ 869 0xc2000000 0x0 0x00000000 0x1 0xf8230000 0x0 0x020000 870 /* BAR4 (PF5) - non-prefetchable memory */ 871 0x82000000 0x0 0x00000000 0x1 0xfc000000 0x0 0x400000>; 872 873 enetc_port0: ethernet@0,0 { 874 compatible = "fsl,enetc"; 875 reg = <0x000000 0 0 0 0>; 876 status = "disabled"; 877 }; 878 879 enetc_port1: ethernet@0,1 { 880 compatible = "fsl,enetc"; 881 reg = <0x000100 0 0 0 0>; 882 status = "disabled"; 883 }; 884 885 enetc_port2: ethernet@0,2 { 886 compatible = "fsl,enetc"; 887 reg = <0x000200 0 0 0 0>; 888 phy-mode = "internal"; 889 status = "disabled"; 890 891 fixed-link { 892 speed = <1000>; 893 full-duplex; 894 }; 895 }; 896 897 enetc_mdio_pf3: mdio@0,3 { 898 compatible = "fsl,enetc-mdio"; 899 reg = <0x000300 0 0 0 0>; 900 #address-cells = <1>; 901 #size-cells = <0>; 902 }; 903 904 ethernet@0,4 { 905 compatible = "fsl,enetc-ptp"; 906 reg = <0x000400 0 0 0 0>; 907 clocks = <&clockgen 4 0>; 908 little-endian; 909 fsl,extts-fifo; 910 }; 911 912 mscc_felix: ethernet-switch@0,5 { 913 reg = <0x000500 0 0 0 0>; 914 /* IEP INT_B */ 915 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; 916 status = "disabled"; 917 918 ports { 919 #address-cells = <1>; 920 #size-cells = <0>; 921 922 /* External ports */ 923 mscc_felix_port0: port@0 { 924 reg = <0>; 925 status = "disabled"; 926 }; 927 928 mscc_felix_port1: port@1 { 929 reg = <1>; 930 status = "disabled"; 931 }; 932 933 mscc_felix_port2: port@2 { 934 reg = <2>; 935 status = "disabled"; 936 }; 937 938 mscc_felix_port3: port@3 { 939 reg = <3>; 940 status = "disabled"; 941 }; 942 943 /* Internal ports */ 944 mscc_felix_port4: port@4 { 945 reg = <4>; 946 phy-mode = "internal"; 947 status = "disabled"; 948 949 fixed-link { 950 speed = <2500>; 951 full-duplex; 952 }; 953 }; 954 955 mscc_felix_port5: port@5 { 956 reg = <5>; 957 phy-mode = "internal"; 958 status = "disabled"; 959 960 fixed-link { 961 speed = <1000>; 962 full-duplex; 963 }; 964 }; 965 }; 966 }; 967 968 enetc_port3: ethernet@0,6 { 969 compatible = "fsl,enetc"; 970 reg = <0x000600 0 0 0 0>; 971 phy-mode = "internal"; 972 status = "disabled"; 973 974 fixed-link { 975 speed = <1000>; 976 full-duplex; 977 }; 978 }; 979 }; 980 }; 981 982 malidp0: display@f080000 { 983 compatible = "arm,mali-dp500"; 984 reg = <0x0 0xf080000 0x0 0x10000>; 985 interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, 986 <0 223 IRQ_TYPE_LEVEL_HIGH>; 987 interrupt-names = "DE", "SE"; 988 clocks = <&dpclk>, <&clockgen 2 2>, <&clockgen 2 2>, 989 <&clockgen 2 2>; 990 clock-names = "pxlclk", "mclk", "aclk", "pclk"; 991 arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; 992 arm,malidp-arqos-value = <0xd000d000>; 993 994 port { 995 dp0_out: endpoint { 996 997 }; 998 }; 999 }; 1000}; 1001