1/*
2 *  BSD LICENSE
3 *
4 *  Copyright(c) 2015-2017 Broadcom.  All rights reserved.
5 *
6 *  Redistribution and use in source and binary forms, with or without
7 *  modification, are permitted provided that the following conditions
8 *  are met:
9 *
10 *    * Redistributions of source code must retain the above copyright
11 *      notice, this list of conditions and the following disclaimer.
12 *    * Redistributions in binary form must reproduce the above copyright
13 *      notice, this list of conditions and the following disclaimer in
14 *      the documentation and/or other materials provided with the
15 *      distribution.
16 *    * Neither the name of Broadcom nor the names of its
17 *      contributors may be used to endorse or promote products derived
18 *      from this software without specific prior written permission.
19 *
20 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23 *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24 *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25 *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26 *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30 *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 */
32
33#include <dt-bindings/interrupt-controller/arm-gic.h>
34
35/ {
36	compatible = "brcm,stingray";
37	interrupt-parent = <&gic>;
38	#address-cells = <2>;
39	#size-cells = <2>;
40
41	cpus {
42		#address-cells = <2>;
43		#size-cells = <0>;
44
45		cpu@0 {
46			device_type = "cpu";
47			compatible = "arm,cortex-a72";
48			reg = <0x0 0x0>;
49			enable-method = "psci";
50			next-level-cache = <&CLUSTER0_L2>;
51		};
52
53		cpu@1 {
54			device_type = "cpu";
55			compatible = "arm,cortex-a72";
56			reg = <0x0 0x1>;
57			enable-method = "psci";
58			next-level-cache = <&CLUSTER0_L2>;
59		};
60
61		cpu@100 {
62			device_type = "cpu";
63			compatible = "arm,cortex-a72";
64			reg = <0x0 0x100>;
65			enable-method = "psci";
66			next-level-cache = <&CLUSTER1_L2>;
67		};
68
69		cpu@101 {
70			device_type = "cpu";
71			compatible = "arm,cortex-a72";
72			reg = <0x0 0x101>;
73			enable-method = "psci";
74			next-level-cache = <&CLUSTER1_L2>;
75		};
76
77		cpu@200 {
78			device_type = "cpu";
79			compatible = "arm,cortex-a72";
80			reg = <0x0 0x200>;
81			enable-method = "psci";
82			next-level-cache = <&CLUSTER2_L2>;
83		};
84
85		cpu@201 {
86			device_type = "cpu";
87			compatible = "arm,cortex-a72";
88			reg = <0x0 0x201>;
89			enable-method = "psci";
90			next-level-cache = <&CLUSTER2_L2>;
91		};
92
93		cpu@300 {
94			device_type = "cpu";
95			compatible = "arm,cortex-a72";
96			reg = <0x0 0x300>;
97			enable-method = "psci";
98			next-level-cache = <&CLUSTER3_L2>;
99		};
100
101		cpu@301 {
102			device_type = "cpu";
103			compatible = "arm,cortex-a72";
104			reg = <0x0 0x301>;
105			enable-method = "psci";
106			next-level-cache = <&CLUSTER3_L2>;
107		};
108
109		CLUSTER0_L2: l2-cache@0 {
110			compatible = "cache";
111		};
112
113		CLUSTER1_L2: l2-cache@100 {
114			compatible = "cache";
115		};
116
117		CLUSTER2_L2: l2-cache@200 {
118			compatible = "cache";
119		};
120
121		CLUSTER3_L2: l2-cache@300 {
122			compatible = "cache";
123		};
124	};
125
126	memory: memory@80000000 {
127		device_type = "memory";
128		reg = <0x00000000 0x80000000 0 0x40000000>;
129	};
130
131	psci {
132		compatible = "arm,psci-0.2";
133		method = "smc";
134	};
135
136	pmu {
137		compatible = "arm,armv8-pmuv3";
138		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
139	};
140
141	timer {
142		compatible = "arm,armv8-timer";
143		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
144			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
145			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
146			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
147	};
148
149	mhb: syscon@60401000 {
150		compatible = "brcm,sr-mhb", "syscon";
151		reg = <0 0x60401000 0 0x38c>;
152	};
153
154	scr {
155		compatible = "simple-bus";
156		#address-cells = <1>;
157		#size-cells = <1>;
158		ranges = <0x0 0x0 0x61000000 0x05000000>;
159
160		ccn: ccn@0 {
161			compatible = "arm,ccn-502";
162			reg = <0x00000000 0x900000>;
163			interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
164		};
165
166		gic: interrupt-controller@2c00000 {
167			compatible = "arm,gic-v3";
168			#interrupt-cells = <3>;
169			#address-cells = <1>;
170			#size-cells = <1>;
171			ranges;
172			interrupt-controller;
173			reg = <0x02c00000 0x010000>, /* GICD */
174			      <0x02e00000 0x600000>; /* GICR */
175			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
176
177			gic_its: gic-its@63c20000 {
178				compatible = "arm,gic-v3-its";
179				msi-controller;
180				#msi-cells = <1>;
181				reg = <0x02c20000 0x10000>;
182			};
183		};
184
185		smmu: mmu@3000000 {
186			compatible = "arm,mmu-500";
187			reg = <0x03000000 0x80000>;
188			#global-interrupts = <1>;
189			interrupts = <GIC_SPI 704 IRQ_TYPE_LEVEL_HIGH>,
190				     <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
191				     <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
192				     <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>,
193				     <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>,
194				     <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>,
195				     <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH>,
196				     <GIC_SPI 717 IRQ_TYPE_LEVEL_HIGH>,
197				     <GIC_SPI 718 IRQ_TYPE_LEVEL_HIGH>,
198				     <GIC_SPI 719 IRQ_TYPE_LEVEL_HIGH>,
199				     <GIC_SPI 720 IRQ_TYPE_LEVEL_HIGH>,
200				     <GIC_SPI 721 IRQ_TYPE_LEVEL_HIGH>,
201				     <GIC_SPI 722 IRQ_TYPE_LEVEL_HIGH>,
202				     <GIC_SPI 723 IRQ_TYPE_LEVEL_HIGH>,
203				     <GIC_SPI 724 IRQ_TYPE_LEVEL_HIGH>,
204				     <GIC_SPI 725 IRQ_TYPE_LEVEL_HIGH>,
205				     <GIC_SPI 726 IRQ_TYPE_LEVEL_HIGH>,
206				     <GIC_SPI 727 IRQ_TYPE_LEVEL_HIGH>,
207				     <GIC_SPI 728 IRQ_TYPE_LEVEL_HIGH>,
208				     <GIC_SPI 729 IRQ_TYPE_LEVEL_HIGH>,
209				     <GIC_SPI 730 IRQ_TYPE_LEVEL_HIGH>,
210				     <GIC_SPI 731 IRQ_TYPE_LEVEL_HIGH>,
211				     <GIC_SPI 732 IRQ_TYPE_LEVEL_HIGH>,
212				     <GIC_SPI 733 IRQ_TYPE_LEVEL_HIGH>,
213				     <GIC_SPI 734 IRQ_TYPE_LEVEL_HIGH>,
214				     <GIC_SPI 735 IRQ_TYPE_LEVEL_HIGH>,
215				     <GIC_SPI 736 IRQ_TYPE_LEVEL_HIGH>,
216				     <GIC_SPI 737 IRQ_TYPE_LEVEL_HIGH>,
217				     <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>,
218				     <GIC_SPI 739 IRQ_TYPE_LEVEL_HIGH>,
219				     <GIC_SPI 740 IRQ_TYPE_LEVEL_HIGH>,
220				     <GIC_SPI 741 IRQ_TYPE_LEVEL_HIGH>,
221				     <GIC_SPI 742 IRQ_TYPE_LEVEL_HIGH>,
222				     <GIC_SPI 743 IRQ_TYPE_LEVEL_HIGH>,
223				     <GIC_SPI 744 IRQ_TYPE_LEVEL_HIGH>,
224				     <GIC_SPI 745 IRQ_TYPE_LEVEL_HIGH>,
225				     <GIC_SPI 746 IRQ_TYPE_LEVEL_HIGH>,
226				     <GIC_SPI 747 IRQ_TYPE_LEVEL_HIGH>,
227				     <GIC_SPI 748 IRQ_TYPE_LEVEL_HIGH>,
228				     <GIC_SPI 749 IRQ_TYPE_LEVEL_HIGH>,
229				     <GIC_SPI 750 IRQ_TYPE_LEVEL_HIGH>,
230				     <GIC_SPI 751 IRQ_TYPE_LEVEL_HIGH>,
231				     <GIC_SPI 752 IRQ_TYPE_LEVEL_HIGH>,
232				     <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>,
233				     <GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH>,
234				     <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH>,
235				     <GIC_SPI 756 IRQ_TYPE_LEVEL_HIGH>,
236				     <GIC_SPI 757 IRQ_TYPE_LEVEL_HIGH>,
237				     <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>,
238				     <GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH>,
239				     <GIC_SPI 760 IRQ_TYPE_LEVEL_HIGH>,
240				     <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>,
241				     <GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH>,
242				     <GIC_SPI 763 IRQ_TYPE_LEVEL_HIGH>,
243				     <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>,
244				     <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH>,
245				     <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>,
246				     <GIC_SPI 767 IRQ_TYPE_LEVEL_HIGH>,
247				     <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>,
248				     <GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>,
249				     <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>,
250				     <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>,
251				     <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>,
252				     <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
253				     <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>;
254			#iommu-cells = <2>;
255		};
256	};
257
258	crmu: crmu {
259		compatible = "simple-bus";
260		#address-cells = <1>;
261		#size-cells = <1>;
262		ranges = <0x0 0x0 0x66400000 0x100000>;
263
264		#include "stingray-clock.dtsi"
265
266		otp: otp@1c400 {
267			compatible = "brcm,ocotp-v2";
268			reg = <0x0001c400 0x68>;
269			brcm,ocotp-size = <2048>;
270			status = "okay";
271		};
272
273		cdru: syscon@1d000 {
274			compatible = "brcm,sr-cdru", "syscon";
275			reg = <0x0001d000 0x400>;
276		};
277
278		gpio_crmu: gpio@24800 {
279			compatible = "brcm,iproc-gpio";
280			reg = <0x00024800 0x4c>;
281			ngpios = <6>;
282			#gpio-cells = <2>;
283			gpio-controller;
284		};
285	};
286
287	#include "stingray-fs4.dtsi"
288	#include "stingray-pcie.dtsi"
289	#include "stingray-usb.dtsi"
290
291	hsls {
292		compatible = "simple-bus";
293		#address-cells = <1>;
294		#size-cells = <1>;
295		ranges = <0x0 0x0 0x68900000 0x17700000>;
296
297		#include "stingray-pinctrl.dtsi"
298
299		mdio_mux_iproc: mdio-mux@20000 {
300			compatible = "brcm,mdio-mux-iproc";
301			reg = <0x00020000 0x250>;
302			#address-cells = <1>;
303			#size-cells = <0>;
304
305			mdio@0 { /* PCIe serdes */
306				reg = <0x0>;
307				#address-cells = <1>;
308				#size-cells = <0>;
309			};
310
311			mdio@3 { /* USB */
312				reg = <0x3>;
313				#address-cells = <1>;
314				#size-cells = <0>;
315			};
316
317			mdio@10 { /* RGMII */
318				reg = <0x10>;
319				#address-cells = <1>;
320				#size-cells = <0>;
321			};
322		};
323
324		pwm: pwm@10000 {
325			compatible = "brcm,iproc-pwm";
326			reg = <0x00010000 0x1000>;
327			clocks = <&crmu_ref25m>;
328			#pwm-cells = <3>;
329			status = "disabled";
330		};
331
332		timer0: timer@30000 {
333			compatible = "arm,sp804", "arm,primecell";
334			reg = <0x00030000 0x1000>;
335			interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
336			clocks = <&hsls_25m_div2_clk>,
337				 <&hsls_25m_div2_clk>,
338				 <&hsls_div4_clk>;
339			clock-names = "timer1", "timer2", "apb_pclk";
340			status = "disabled";
341		};
342
343		timer1: timer@40000 {
344			compatible = "arm,sp804", "arm,primecell";
345			reg = <0x00040000 0x1000>;
346			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
347			clocks = <&hsls_25m_div2_clk>,
348				 <&hsls_25m_div2_clk>,
349				 <&hsls_div4_clk>;
350			clock-names = "timer1", "timer2", "apb_pclk";
351		};
352
353		timer2: timer@50000 {
354			compatible = "arm,sp804", "arm,primecell";
355			reg = <0x00050000 0x1000>;
356			interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
357			clocks = <&hsls_25m_div2_clk>,
358				 <&hsls_25m_div2_clk>,
359				 <&hsls_div4_clk>;
360			clock-names = "timer1", "timer2", "apb_pclk";
361			status = "disabled";
362		};
363
364		timer3: timer@60000 {
365			compatible = "arm,sp804", "arm,primecell";
366			reg = <0x00060000 0x1000>;
367			interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
368			clocks = <&hsls_25m_div2_clk>,
369				 <&hsls_25m_div2_clk>,
370				 <&hsls_div4_clk>;
371			clock-names = "timer1", "timer2", "apb_pclk";
372			status = "disabled";
373		};
374
375		timer4: timer@70000 {
376			compatible = "arm,sp804", "arm,primecell";
377			reg = <0x00070000 0x1000>;
378			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
379			clocks = <&hsls_25m_div2_clk>,
380				 <&hsls_25m_div2_clk>,
381				 <&hsls_div4_clk>;
382			clock-names = "timer1", "timer2", "apb_pclk";
383			status = "disabled";
384		};
385
386		timer5: timer@80000 {
387			compatible = "arm,sp804", "arm,primecell";
388			reg = <0x00080000 0x1000>;
389			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
390			clocks = <&hsls_25m_div2_clk>,
391				 <&hsls_25m_div2_clk>,
392				 <&hsls_div4_clk>;
393			clock-names = "timer1", "timer2", "apb_pclk";
394			status = "disabled";
395		};
396
397		timer6: timer@90000 {
398			compatible = "arm,sp804", "arm,primecell";
399			reg = <0x00090000 0x1000>;
400			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
401			clocks = <&hsls_25m_div2_clk>,
402				 <&hsls_25m_div2_clk>,
403				 <&hsls_div4_clk>;
404			clock-names = "timer1", "timer2", "apb_pclk";
405			status = "disabled";
406		};
407
408		timer7: timer@a0000 {
409			compatible = "arm,sp804", "arm,primecell";
410			reg = <0x000a0000 0x1000>;
411			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
412			clocks = <&hsls_25m_div2_clk>,
413				 <&hsls_25m_div2_clk>,
414				 <&hsls_div4_clk>;
415			clock-names = "timer1", "timer2", "apb_pclk";
416			status = "disabled";
417		};
418
419		i2c0: i2c@b0000 {
420			compatible = "brcm,iproc-i2c";
421			reg = <0x000b0000 0x100>;
422			#address-cells = <1>;
423			#size-cells = <0>;
424			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
425			clock-frequency = <100000>;
426			status = "disabled";
427		};
428
429		wdt0: watchdog@c0000 {
430			compatible = "arm,sp805", "arm,primecell";
431			reg = <0x000c0000 0x1000>;
432			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
433			clocks = <&hsls_25m_div2_clk>, <&hsls_div4_clk>;
434			clock-names = "wdog_clk", "apb_pclk";
435			timeout-sec = <60>;
436		};
437
438		gpio_hsls: gpio@d0000 {
439			compatible = "brcm,iproc-gpio";
440			reg = <0x000d0000 0x864>;
441			ngpios = <151>;
442			#gpio-cells = <2>;
443			gpio-controller;
444			interrupt-controller;
445			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
446			gpio-ranges = <&pinmux 0 0 16>,
447					<&pinmux 16 71 2>,
448					<&pinmux 18 131 8>,
449					<&pinmux 26 83 6>,
450					<&pinmux 32 123 4>,
451					<&pinmux 36 43 24>,
452					<&pinmux 60 89 2>,
453					<&pinmux 62 73 4>,
454					<&pinmux 66 95 28>,
455					<&pinmux 94 127 4>,
456					<&pinmux 98 139 10>,
457					<&pinmux 108 16 27>,
458					<&pinmux 135 77 6>,
459					<&pinmux 141 67 4>,
460					<&pinmux 145 149 6>;
461		};
462
463		i2c1: i2c@e0000 {
464			compatible = "brcm,iproc-i2c";
465			reg = <0x000e0000 0x100>;
466			#address-cells = <1>;
467			#size-cells = <0>;
468			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
469			clock-frequency = <100000>;
470			status = "disabled";
471		};
472
473		uart0: serial@100000 {
474			device_type = "serial";
475			compatible = "snps,dw-apb-uart";
476			reg = <0x00100000 0x1000>;
477			reg-shift = <2>;
478			clock-frequency = <25000000>;
479			interrupt-parent = <&gic>;
480			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
481			status = "disabled";
482		};
483
484		uart1: serial@110000 {
485			device_type = "serial";
486			compatible = "snps,dw-apb-uart";
487			reg = <0x00110000 0x1000>;
488			reg-shift = <2>;
489			clock-frequency = <25000000>;
490			interrupt-parent = <&gic>;
491			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
492			status = "disabled";
493		};
494
495		uart2: serial@120000 {
496			device_type = "serial";
497			compatible = "snps,dw-apb-uart";
498			reg = <0x00120000 0x1000>;
499			reg-shift = <2>;
500			clock-frequency = <25000000>;
501			interrupt-parent = <&gic>;
502			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
503			status = "disabled";
504		};
505
506		uart3: serial@130000 {
507			device_type = "serial";
508			compatible = "snps,dw-apb-uart";
509			reg = <0x00130000 0x1000>;
510			reg-shift = <2>;
511			clock-frequency = <25000000>;
512			interrupt-parent = <&gic>;
513			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
514			status = "disabled";
515		};
516
517		ssp0: spi@180000 {
518			compatible = "arm,pl022", "arm,primecell";
519			reg = <0x00180000 0x1000>;
520			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
521			clocks = <&hsls_div2_clk>, <&hsls_div2_clk>;
522			clock-names = "sspclk", "apb_pclk";
523			num-cs = <1>;
524			#address-cells = <1>;
525			#size-cells = <0>;
526			status = "disabled";
527		};
528
529		ssp1: spi@190000 {
530			compatible = "arm,pl022", "arm,primecell";
531			reg = <0x00190000 0x1000>;
532			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
533			clocks = <&hsls_div2_clk>, <&hsls_div2_clk>;
534			clock-names = "sspclk", "apb_pclk";
535			num-cs = <1>;
536			#address-cells = <1>;
537			#size-cells = <0>;
538			status = "disabled";
539		};
540
541		hwrng: hwrng@220000 {
542			compatible = "brcm,iproc-rng200";
543			reg = <0x00220000 0x28>;
544		};
545
546		dma0: dma-controller@310000 {
547			compatible = "arm,pl330", "arm,primecell";
548			reg = <0x00310000 0x1000>;
549			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
550				     <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
551				     <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
552				     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
553				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
554				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
555				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
556				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
557				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
558			#dma-cells = <1>;
559			clocks = <&hsls_div2_clk>;
560			clock-names = "apb_pclk";
561			iommus = <&smmu 0x6000 0x0000>;
562		};
563
564		enet: ethernet@340000{
565			compatible = "brcm,amac";
566			reg = <0x00340000 0x1000>;
567			reg-names = "amac_base";
568			dma-coherent;
569			interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
570			status= "disabled";
571		};
572
573		nand: nand@360000 {
574			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
575			reg = <0x00360000 0x600>,
576			      <0x0050a408 0x600>,
577			      <0x00360f00 0x20>;
578			reg-names = "nand", "iproc-idm", "iproc-ext";
579			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
580			#address-cells = <1>;
581			#size-cells = <0>;
582			brcm,nand-has-wp;
583			status = "disabled";
584		};
585
586		sdio0: sdhci@3f1000 {
587			compatible = "brcm,sdhci-iproc";
588			reg = <0x003f1000 0x100>;
589			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
590			bus-width = <8>;
591			clocks = <&sdio0_clk>;
592			iommus = <&smmu 0x6002 0x0000>;
593			status = "disabled";
594		};
595
596		sdio1: sdhci@3f2000 {
597			compatible = "brcm,sdhci-iproc";
598			reg = <0x003f2000 0x100>;
599			interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
600			bus-width = <8>;
601			clocks = <&sdio1_clk>;
602			iommus = <&smmu 0x6003 0x0000>;
603			status = "disabled";
604		};
605	};
606
607	tmons {
608		compatible = "simple-bus";
609		#address-cells = <1>;
610		#size-cells = <1>;
611		ranges = <0x0 0x0 0x8f100000 0x100>;
612
613		tmon: tmon@0 {
614			compatible = "brcm,sr-thermal";
615			reg = <0x0 0x40>;
616			brcm,tmon-mask = <0x3f>;
617			#thermal-sensor-cells = <1>;
618		};
619	};
620
621	thermal-zones {
622		ihost0_thermal: ihost0-thermal {
623			polling-delay-passive = <0>;
624			polling-delay = <1000>;
625			thermal-sensors = <&tmon 0>;
626			trips {
627				cpu-crit {
628					temperature = <105000>;
629					hysteresis = <0>;
630					type = "critical";
631				};
632			};
633		};
634		ihost1_thermal: ihost1-thermal {
635			polling-delay-passive = <0>;
636			polling-delay = <1000>;
637			thermal-sensors = <&tmon 1>;
638			trips {
639				cpu-crit {
640					temperature = <105000>;
641					hysteresis = <0>;
642					type = "critical";
643				};
644			};
645		};
646		ihost2_thermal: ihost2-thermal {
647			polling-delay-passive = <0>;
648			polling-delay = <1000>;
649			thermal-sensors = <&tmon 2>;
650			trips {
651				cpu-crit {
652					temperature = <105000>;
653					hysteresis = <0>;
654					type = "critical";
655				};
656			};
657		};
658		ihost3_thermal: ihost3-thermal {
659			polling-delay-passive = <0>;
660			polling-delay = <1000>;
661			thermal-sensors = <&tmon 3>;
662			trips {
663				cpu-crit {
664					temperature = <105000>;
665					hysteresis = <0>;
666					type = "critical";
667				};
668			};
669		};
670		crmu_thermal: crmu-thermal {
671			polling-delay-passive = <0>;
672			polling-delay = <1000>;
673			thermal-sensors = <&tmon 4>;
674			trips {
675				cpu-crit {
676					temperature = <105000>;
677					hysteresis = <0>;
678					type = "critical";
679				};
680			};
681		};
682		nitro_thermal: nitro-thermal {
683			polling-delay-passive = <0>;
684			polling-delay = <1000>;
685			thermal-sensors = <&tmon 5>;
686			trips {
687				cpu-crit {
688					temperature = <105000>;
689					hysteresis = <0>;
690					type = "critical";
691				};
692			};
693		};
694	};
695
696	nic-hsls {
697		compatible = "simple-bus";
698		#address-cells = <1>;
699		#size-cells = <1>;
700		ranges = <0x0 0x0  0x0 0x7fffffff>;
701
702		nic_i2c0: i2c@60826100 {
703			compatible = "brcm,iproc-nic-i2c";
704			#address-cells = <1>;
705			#size-cells = <0>;
706			reg = <0x60826100 0x100>,
707			      <0x60e00408 0x1000>;
708			brcm,ape-hsls-addr-mask = <0x03400000>;
709			clock-frequency = <100000>;
710			status = "disabled";
711		};
712	};
713};
714