1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Copyright Altera Corporation (C) 2015. All rights reserved. 4 */ 5 6#include "socfpga_stratix10.dtsi" 7 8/ { 9 model = "SoCFPGA Stratix 10 SoCDK"; 10 compatible = "altr,socfpga-stratix10-socdk", "altr,socfpga-stratix10"; 11 12 aliases { 13 serial0 = &uart0; 14 ethernet0 = &gmac0; 15 ethernet1 = &gmac1; 16 ethernet2 = &gmac2; 17 }; 18 19 chosen { 20 stdout-path = "serial0:115200n8"; 21 }; 22 23 leds { 24 compatible = "gpio-leds"; 25 led-hps0 { 26 label = "hps_led0"; 27 gpios = <&portb 20 GPIO_ACTIVE_HIGH>; 28 }; 29 30 led-hps1 { 31 label = "hps_led1"; 32 gpios = <&portb 19 GPIO_ACTIVE_HIGH>; 33 }; 34 35 led-hps2 { 36 label = "hps_led2"; 37 gpios = <&portb 21 GPIO_ACTIVE_HIGH>; 38 }; 39 }; 40 41 memory@80000000 { 42 device_type = "memory"; 43 /* We expect the bootloader to fill in the reg */ 44 reg = <0 0x80000000 0 0>; 45 }; 46 47 ref_033v: regulator-v-ref { 48 compatible = "regulator-fixed"; 49 regulator-name = "0.33V"; 50 regulator-min-microvolt = <330000>; 51 regulator-max-microvolt = <330000>; 52 }; 53 54 soc { 55 eccmgr { 56 sdmmca-ecc@ff8c8c00 { 57 compatible = "altr,socfpga-s10-sdmmc-ecc", 58 "altr,socfpga-sdmmc-ecc"; 59 reg = <0xff8c8c00 0x100>; 60 altr,ecc-parent = <&mmc>; 61 interrupts = <14 4>, 62 <15 4>; 63 }; 64 }; 65 }; 66}; 67 68&pinctrl0 { 69 i2c1_pmx_func: i2c1-pmx-func { 70 pinctrl-single,pins = < 71 0x78 0x4 /* I2C1_SDA (IO6-B) PIN30SEL) */ 72 0x7c 0x4 /* I2C1_SCL (IO7-B) PIN31SEL */ 73 >; 74 }; 75 76 i2c1_pmx_func_gpio: i2c1-pmx-func-gpio { 77 pinctrl-single,pins = < 78 0x78 0x8 /* I2C1_SDA (IO6-B) PIN30SEL) */ 79 0x7c 0x8 /* I2C1_SCL (IO7-B) PIN31SEL */ 80 >; 81 }; 82}; 83 84&gpio1 { 85 status = "okay"; 86}; 87 88&gmac0 { 89 status = "okay"; 90 phy-mode = "rgmii"; 91 phy-handle = <&phy0>; 92 93 max-frame-size = <9000>; 94 95 mdio0 { 96 #address-cells = <1>; 97 #size-cells = <0>; 98 compatible = "snps,dwmac-mdio"; 99 phy0: ethernet-phy@0 { 100 reg = <4>; 101 102 txd0-skew-ps = <0>; /* -420ps */ 103 txd1-skew-ps = <0>; /* -420ps */ 104 txd2-skew-ps = <0>; /* -420ps */ 105 txd3-skew-ps = <0>; /* -420ps */ 106 rxd0-skew-ps = <420>; /* 0ps */ 107 rxd1-skew-ps = <420>; /* 0ps */ 108 rxd2-skew-ps = <420>; /* 0ps */ 109 rxd3-skew-ps = <420>; /* 0ps */ 110 txen-skew-ps = <0>; /* -420ps */ 111 txc-skew-ps = <900>; /* 0ps */ 112 rxdv-skew-ps = <420>; /* 0ps */ 113 rxc-skew-ps = <1680>; /* 780ps */ 114 }; 115 }; 116}; 117 118&mmc { 119 status = "okay"; 120 cap-sd-highspeed; 121 cap-mmc-highspeed; 122 broken-cd; 123 bus-width = <4>; 124 clk-phase-sd-hs = <0>, <135>; 125}; 126 127&osc1 { 128 clock-frequency = <25000000>; 129}; 130 131&uart0 { 132 status = "okay"; 133}; 134 135&usb0 { 136 status = "okay"; 137 disable-over-current; 138}; 139 140&watchdog0 { 141 status = "okay"; 142}; 143 144&i2c1 { 145 status = "okay"; 146 clock-frequency = <100000>; 147 i2c-sda-falling-time-ns = <890>; /* hcnt */ 148 i2c-scl-falling-time-ns = <890>; /* lcnt */ 149 150 pinctrl-names = "default", "gpio"; 151 pinctrl-0 = <&i2c1_pmx_func>; 152 pinctrl-1 = <&i2c1_pmx_func_gpio>; 153 154 scl-gpios = <&portb 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 155 sda-gpios = <&portb 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 156 157 adc@14 { 158 compatible = "lltc,ltc2497"; 159 reg = <0x14>; 160 vref-supply = <&ref_033v>; 161 }; 162 163 temp@4c { 164 compatible = "maxim,max1619"; 165 reg = <0x4c>; 166 }; 167 168 eeprom@51 { 169 compatible = "atmel,24c32"; 170 reg = <0x51>; 171 pagesize = <32>; 172 }; 173 174 rtc@68 { 175 compatible = "dallas,ds1339"; 176 reg = <0x68>; 177 }; 178}; 179 180&qspi { 181 status = "okay"; 182 flash@0 { 183 #address-cells = <1>; 184 #size-cells = <1>; 185 compatible = "micron,mt25qu02g", "jedec,spi-nor"; 186 reg = <0>; 187 spi-max-frequency = <100000000>; 188 189 m25p,fast-read; 190 cdns,page-size = <256>; 191 cdns,block-size = <16>; 192 cdns,read-delay = <1>; 193 cdns,tshsl-ns = <50>; 194 cdns,tsd2d-ns = <50>; 195 cdns,tchsh-ns = <4>; 196 cdns,tslch-ns = <4>; 197 198 partitions { 199 compatible = "fixed-partitions"; 200 #address-cells = <1>; 201 #size-cells = <1>; 202 203 qspi_boot: partition@0 { 204 label = "Boot and fpga data"; 205 reg = <0x0 0x04200000>; 206 }; 207 208 root: partition@4200000 { 209 label = "Root Filesystem - UBIFS"; 210 reg = <0x04200000 0x0BE00000>; 211 }; 212 }; 213 }; 214}; 215