1 /* 2 * linux/arch/arm/mach-sa1100/neponset.c 3 * 4 */ 5 #include <linux/kernel.h> 6 #include <linux/init.h> 7 #include <linux/ptrace.h> 8 #include <linux/tty.h> 9 #include <linux/ioport.h> 10 #include <linux/serial_core.h> 11 #include <linux/platform_device.h> 12 #include <linux/slab.h> 13 14 #include <asm/hardware.h> 15 #include <asm/mach-types.h> 16 #include <asm/irq.h> 17 #include <asm/mach/map.h> 18 #include <asm/mach/irq.h> 19 #include <asm/mach/serial_sa1100.h> 20 #include <asm/arch/assabet.h> 21 #include <asm/arch/neponset.h> 22 #include <asm/hardware/sa1111.h> 23 #include <asm/sizes.h> 24 25 /* 26 * Install handler for Neponset IRQ. Note that we have to loop here 27 * since the ETHERNET and USAR IRQs are level based, and we need to 28 * ensure that the IRQ signal is deasserted before returning. This 29 * is rather unfortunate. 30 */ 31 static void 32 neponset_irq_handler(unsigned int irq, struct irqdesc *desc) 33 { 34 unsigned int irr; 35 36 while (1) { 37 struct irqdesc *d; 38 39 /* 40 * Acknowledge the parent IRQ. 41 */ 42 desc->chip->ack(irq); 43 44 /* 45 * Read the interrupt reason register. Let's have all 46 * active IRQ bits high. Note: there is a typo in the 47 * Neponset user's guide for the SA1111 IRR level. 48 */ 49 irr = IRR ^ (IRR_ETHERNET | IRR_USAR); 50 51 if ((irr & (IRR_ETHERNET | IRR_USAR | IRR_SA1111)) == 0) 52 break; 53 54 /* 55 * Since there is no individual mask, we have to 56 * mask the parent IRQ. This is safe, since we'll 57 * recheck the register for any pending IRQs. 58 */ 59 if (irr & (IRR_ETHERNET | IRR_USAR)) { 60 desc->chip->mask(irq); 61 62 /* 63 * Ack the interrupt now to prevent re-entering 64 * this neponset handler. Again, this is safe 65 * since we'll check the IRR register prior to 66 * leaving. 67 */ 68 desc->chip->ack(irq); 69 70 if (irr & IRR_ETHERNET) { 71 d = irq_desc + IRQ_NEPONSET_SMC9196; 72 desc_handle_irq(IRQ_NEPONSET_SMC9196, d); 73 } 74 75 if (irr & IRR_USAR) { 76 d = irq_desc + IRQ_NEPONSET_USAR; 77 desc_handle_irq(IRQ_NEPONSET_USAR, d); 78 } 79 80 desc->chip->unmask(irq); 81 } 82 83 if (irr & IRR_SA1111) { 84 d = irq_desc + IRQ_NEPONSET_SA1111; 85 desc_handle_irq(IRQ_NEPONSET_SA1111, d); 86 } 87 } 88 } 89 90 static void neponset_set_mctrl(struct uart_port *port, u_int mctrl) 91 { 92 u_int mdm_ctl0 = MDM_CTL_0; 93 94 if (port->mapbase == _Ser1UTCR0) { 95 if (mctrl & TIOCM_RTS) 96 mdm_ctl0 &= ~MDM_CTL0_RTS2; 97 else 98 mdm_ctl0 |= MDM_CTL0_RTS2; 99 100 if (mctrl & TIOCM_DTR) 101 mdm_ctl0 &= ~MDM_CTL0_DTR2; 102 else 103 mdm_ctl0 |= MDM_CTL0_DTR2; 104 } else if (port->mapbase == _Ser3UTCR0) { 105 if (mctrl & TIOCM_RTS) 106 mdm_ctl0 &= ~MDM_CTL0_RTS1; 107 else 108 mdm_ctl0 |= MDM_CTL0_RTS1; 109 110 if (mctrl & TIOCM_DTR) 111 mdm_ctl0 &= ~MDM_CTL0_DTR1; 112 else 113 mdm_ctl0 |= MDM_CTL0_DTR1; 114 } 115 116 MDM_CTL_0 = mdm_ctl0; 117 } 118 119 static u_int neponset_get_mctrl(struct uart_port *port) 120 { 121 u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR; 122 u_int mdm_ctl1 = MDM_CTL_1; 123 124 if (port->mapbase == _Ser1UTCR0) { 125 if (mdm_ctl1 & MDM_CTL1_DCD2) 126 ret &= ~TIOCM_CD; 127 if (mdm_ctl1 & MDM_CTL1_CTS2) 128 ret &= ~TIOCM_CTS; 129 if (mdm_ctl1 & MDM_CTL1_DSR2) 130 ret &= ~TIOCM_DSR; 131 } else if (port->mapbase == _Ser3UTCR0) { 132 if (mdm_ctl1 & MDM_CTL1_DCD1) 133 ret &= ~TIOCM_CD; 134 if (mdm_ctl1 & MDM_CTL1_CTS1) 135 ret &= ~TIOCM_CTS; 136 if (mdm_ctl1 & MDM_CTL1_DSR1) 137 ret &= ~TIOCM_DSR; 138 } 139 140 return ret; 141 } 142 143 static struct sa1100_port_fns neponset_port_fns __initdata = { 144 .set_mctrl = neponset_set_mctrl, 145 .get_mctrl = neponset_get_mctrl, 146 }; 147 148 static int neponset_probe(struct platform_device *dev) 149 { 150 sa1100_register_uart_fns(&neponset_port_fns); 151 152 /* 153 * Install handler for GPIO25. 154 */ 155 set_irq_type(IRQ_GPIO25, IRQT_RISING); 156 set_irq_chained_handler(IRQ_GPIO25, neponset_irq_handler); 157 158 /* 159 * We would set IRQ_GPIO25 to be a wake-up IRQ, but 160 * unfortunately something on the Neponset activates 161 * this IRQ on sleep (ethernet?) 162 */ 163 #if 0 164 enable_irq_wake(IRQ_GPIO25); 165 #endif 166 167 /* 168 * Setup other Neponset IRQs. SA1111 will be done by the 169 * generic SA1111 code. 170 */ 171 set_irq_handler(IRQ_NEPONSET_SMC9196, do_simple_IRQ); 172 set_irq_flags(IRQ_NEPONSET_SMC9196, IRQF_VALID | IRQF_PROBE); 173 set_irq_handler(IRQ_NEPONSET_USAR, do_simple_IRQ); 174 set_irq_flags(IRQ_NEPONSET_USAR, IRQF_VALID | IRQF_PROBE); 175 176 /* 177 * Disable GPIO 0/1 drivers so the buttons work on the module. 178 */ 179 NCR_0 = NCR_GP01_OFF; 180 181 return 0; 182 } 183 184 #ifdef CONFIG_PM 185 186 /* 187 * LDM power management. 188 */ 189 static int neponset_suspend(struct platform_device *dev, pm_message_t state) 190 { 191 /* 192 * Save state. 193 */ 194 if (!dev->dev.power.saved_state) 195 dev->dev.power.saved_state = kmalloc(sizeof(unsigned int), GFP_KERNEL); 196 if (!dev->dev.power.saved_state) 197 return -ENOMEM; 198 199 *(unsigned int *)dev->dev.power.saved_state = NCR_0; 200 201 return 0; 202 } 203 204 static int neponset_resume(struct platform_device *dev) 205 { 206 if (dev->dev.power.saved_state) { 207 NCR_0 = *(unsigned int *)dev->dev.power.saved_state; 208 kfree(dev->dev.power.saved_state); 209 dev->dev.power.saved_state = NULL; 210 } 211 212 return 0; 213 } 214 215 #else 216 #define neponset_suspend NULL 217 #define neponset_resume NULL 218 #endif 219 220 static struct platform_driver neponset_device_driver = { 221 .probe = neponset_probe, 222 .suspend = neponset_suspend, 223 .resume = neponset_resume, 224 .driver = { 225 .name = "neponset", 226 }, 227 }; 228 229 static struct resource neponset_resources[] = { 230 [0] = { 231 .start = 0x10000000, 232 .end = 0x17ffffff, 233 .flags = IORESOURCE_MEM, 234 }, 235 }; 236 237 static struct platform_device neponset_device = { 238 .name = "neponset", 239 .id = 0, 240 .num_resources = ARRAY_SIZE(neponset_resources), 241 .resource = neponset_resources, 242 }; 243 244 static struct resource sa1111_resources[] = { 245 [0] = { 246 .start = 0x40000000, 247 .end = 0x40001fff, 248 .flags = IORESOURCE_MEM, 249 }, 250 [1] = { 251 .start = IRQ_NEPONSET_SA1111, 252 .end = IRQ_NEPONSET_SA1111, 253 .flags = IORESOURCE_IRQ, 254 }, 255 }; 256 257 static u64 sa1111_dmamask = 0xffffffffUL; 258 259 static struct platform_device sa1111_device = { 260 .name = "sa1111", 261 .id = 0, 262 .dev = { 263 .dma_mask = &sa1111_dmamask, 264 .coherent_dma_mask = 0xffffffff, 265 }, 266 .num_resources = ARRAY_SIZE(sa1111_resources), 267 .resource = sa1111_resources, 268 }; 269 270 static struct resource smc91x_resources[] = { 271 [0] = { 272 .name = "smc91x-regs", 273 .start = SA1100_CS3_PHYS, 274 .end = SA1100_CS3_PHYS + 0x01ffffff, 275 .flags = IORESOURCE_MEM, 276 }, 277 [1] = { 278 .start = IRQ_NEPONSET_SMC9196, 279 .end = IRQ_NEPONSET_SMC9196, 280 .flags = IORESOURCE_IRQ, 281 }, 282 [2] = { 283 .name = "smc91x-attrib", 284 .start = SA1100_CS3_PHYS + 0x02000000, 285 .end = SA1100_CS3_PHYS + 0x03ffffff, 286 .flags = IORESOURCE_MEM, 287 }, 288 }; 289 290 static struct platform_device smc91x_device = { 291 .name = "smc91x", 292 .id = 0, 293 .num_resources = ARRAY_SIZE(smc91x_resources), 294 .resource = smc91x_resources, 295 }; 296 297 static struct platform_device *devices[] __initdata = { 298 &neponset_device, 299 &sa1111_device, 300 &smc91x_device, 301 }; 302 303 static int __init neponset_init(void) 304 { 305 platform_driver_register(&neponset_device_driver); 306 307 /* 308 * The Neponset is only present on the Assabet machine type. 309 */ 310 if (!machine_is_assabet()) 311 return -ENODEV; 312 313 /* 314 * Ensure that the memory bus request/grant signals are setup, 315 * and the grant is held in its inactive state, whether or not 316 * we actually have a Neponset attached. 317 */ 318 sa1110_mb_disable(); 319 320 if (!machine_has_neponset()) { 321 printk(KERN_DEBUG "Neponset expansion board not present\n"); 322 return -ENODEV; 323 } 324 325 if (WHOAMI != 0x11) { 326 printk(KERN_WARNING "Neponset board detected, but " 327 "wrong ID: %02x\n", WHOAMI); 328 return -ENODEV; 329 } 330 331 return platform_add_devices(devices, ARRAY_SIZE(devices)); 332 } 333 334 subsys_initcall(neponset_init); 335 336 static struct map_desc neponset_io_desc[] __initdata = { 337 { /* System Registers */ 338 .virtual = 0xf3000000, 339 .pfn = __phys_to_pfn(0x10000000), 340 .length = SZ_1M, 341 .type = MT_DEVICE 342 }, { /* SA-1111 */ 343 .virtual = 0xf4000000, 344 .pfn = __phys_to_pfn(0x40000000), 345 .length = SZ_1M, 346 .type = MT_DEVICE 347 } 348 }; 349 350 void __init neponset_map_io(void) 351 { 352 iotable_init(neponset_io_desc, ARRAY_SIZE(neponset_io_desc)); 353 } 354