1 /* 2 * pm.c - Common OMAP2+ power management-related code 3 * 4 * Copyright (C) 2010 Texas Instruments, Inc. 5 * Copyright (C) 2010 Nokia Corporation 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License version 2 as 9 * published by the Free Software Foundation. 10 */ 11 12 #include <linux/kernel.h> 13 #include <linux/init.h> 14 #include <linux/io.h> 15 #include <linux/err.h> 16 #include <linux/opp.h> 17 #include <linux/export.h> 18 #include <linux/suspend.h> 19 #include <linux/cpu.h> 20 21 #include <asm/system_misc.h> 22 23 #include "omap-pm.h" 24 #include "omap_device.h" 25 #include "common.h" 26 27 #include "soc.h" 28 #include "prcm-common.h" 29 #include "voltage.h" 30 #include "powerdomain.h" 31 #include "clockdomain.h" 32 #include "pm.h" 33 #include "twl-common.h" 34 35 /* 36 * omap_pm_suspend: points to a function that does the SoC-specific 37 * suspend work 38 */ 39 int (*omap_pm_suspend)(void); 40 41 #ifdef CONFIG_PM 42 /** 43 * struct omap2_oscillator - Describe the board main oscillator latencies 44 * @startup_time: oscillator startup latency 45 * @shutdown_time: oscillator shutdown latency 46 */ 47 struct omap2_oscillator { 48 u32 startup_time; 49 u32 shutdown_time; 50 }; 51 52 static struct omap2_oscillator oscillator = { 53 .startup_time = ULONG_MAX, 54 .shutdown_time = ULONG_MAX, 55 }; 56 57 void omap_pm_setup_oscillator(u32 tstart, u32 tshut) 58 { 59 oscillator.startup_time = tstart; 60 oscillator.shutdown_time = tshut; 61 } 62 63 void omap_pm_get_oscillator(u32 *tstart, u32 *tshut) 64 { 65 if (!tstart || !tshut) 66 return; 67 68 *tstart = oscillator.startup_time; 69 *tshut = oscillator.shutdown_time; 70 } 71 #endif 72 73 static int __init _init_omap_device(char *name) 74 { 75 struct omap_hwmod *oh; 76 struct platform_device *pdev; 77 78 oh = omap_hwmod_lookup(name); 79 if (WARN(!oh, "%s: could not find omap_hwmod for %s\n", 80 __func__, name)) 81 return -ENODEV; 82 83 pdev = omap_device_build(oh->name, 0, oh, NULL, 0); 84 if (WARN(IS_ERR(pdev), "%s: could not build omap_device for %s\n", 85 __func__, name)) 86 return -ENODEV; 87 88 return 0; 89 } 90 91 /* 92 * Build omap_devices for processors and bus. 93 */ 94 static void __init omap2_init_processor_devices(void) 95 { 96 _init_omap_device("mpu"); 97 if (omap3_has_iva()) 98 _init_omap_device("iva"); 99 100 if (cpu_is_omap44xx()) { 101 _init_omap_device("l3_main_1"); 102 _init_omap_device("dsp"); 103 _init_omap_device("iva"); 104 } else { 105 _init_omap_device("l3_main"); 106 } 107 } 108 109 int __init omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused) 110 { 111 /* XXX The usecount test is racy */ 112 if ((clkdm->flags & CLKDM_CAN_ENABLE_AUTO) && 113 !(clkdm->flags & CLKDM_MISSING_IDLE_REPORTING)) 114 clkdm_allow_idle(clkdm); 115 else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP && 116 clkdm->usecount == 0) 117 clkdm_sleep(clkdm); 118 return 0; 119 } 120 121 /* 122 * This API is to be called during init to set the various voltage 123 * domains to the voltage as per the opp table. Typically we boot up 124 * at the nominal voltage. So this function finds out the rate of 125 * the clock associated with the voltage domain, finds out the correct 126 * opp entry and sets the voltage domain to the voltage specified 127 * in the opp entry 128 */ 129 static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, 130 const char *oh_name) 131 { 132 struct voltagedomain *voltdm; 133 struct clk *clk; 134 struct opp *opp; 135 unsigned long freq, bootup_volt; 136 struct device *dev; 137 138 if (!vdd_name || !clk_name || !oh_name) { 139 pr_err("%s: invalid parameters\n", __func__); 140 goto exit; 141 } 142 143 if (!strncmp(oh_name, "mpu", 3)) 144 /* 145 * All current OMAPs share voltage rail and clock 146 * source, so CPU0 is used to represent the MPU-SS. 147 */ 148 dev = get_cpu_device(0); 149 else 150 dev = omap_device_get_by_hwmod_name(oh_name); 151 152 if (IS_ERR(dev)) { 153 pr_err("%s: Unable to get dev pointer for hwmod %s\n", 154 __func__, oh_name); 155 goto exit; 156 } 157 158 voltdm = voltdm_lookup(vdd_name); 159 if (!voltdm) { 160 pr_err("%s: unable to get vdd pointer for vdd_%s\n", 161 __func__, vdd_name); 162 goto exit; 163 } 164 165 clk = clk_get(NULL, clk_name); 166 if (IS_ERR(clk)) { 167 pr_err("%s: unable to get clk %s\n", __func__, clk_name); 168 goto exit; 169 } 170 171 freq = clk_get_rate(clk); 172 clk_put(clk); 173 174 rcu_read_lock(); 175 opp = opp_find_freq_ceil(dev, &freq); 176 if (IS_ERR(opp)) { 177 rcu_read_unlock(); 178 pr_err("%s: unable to find boot up OPP for vdd_%s\n", 179 __func__, vdd_name); 180 goto exit; 181 } 182 183 bootup_volt = opp_get_voltage(opp); 184 rcu_read_unlock(); 185 if (!bootup_volt) { 186 pr_err("%s: unable to find voltage corresponding to the bootup OPP for vdd_%s\n", 187 __func__, vdd_name); 188 goto exit; 189 } 190 191 voltdm_scale(voltdm, bootup_volt); 192 return 0; 193 194 exit: 195 pr_err("%s: unable to set vdd_%s\n", __func__, vdd_name); 196 return -EINVAL; 197 } 198 199 #ifdef CONFIG_SUSPEND 200 static int omap_pm_enter(suspend_state_t suspend_state) 201 { 202 int ret = 0; 203 204 if (!omap_pm_suspend) 205 return -ENOENT; /* XXX doublecheck */ 206 207 switch (suspend_state) { 208 case PM_SUSPEND_STANDBY: 209 case PM_SUSPEND_MEM: 210 ret = omap_pm_suspend(); 211 break; 212 default: 213 ret = -EINVAL; 214 } 215 216 return ret; 217 } 218 219 static int omap_pm_begin(suspend_state_t state) 220 { 221 disable_hlt(); 222 if (cpu_is_omap34xx()) 223 omap_prcm_irq_prepare(); 224 return 0; 225 } 226 227 static void omap_pm_end(void) 228 { 229 enable_hlt(); 230 return; 231 } 232 233 static void omap_pm_finish(void) 234 { 235 if (cpu_is_omap34xx()) 236 omap_prcm_irq_complete(); 237 } 238 239 static const struct platform_suspend_ops omap_pm_ops = { 240 .begin = omap_pm_begin, 241 .end = omap_pm_end, 242 .enter = omap_pm_enter, 243 .finish = omap_pm_finish, 244 .valid = suspend_valid_only_mem, 245 }; 246 247 #endif /* CONFIG_SUSPEND */ 248 249 static void __init omap3_init_voltages(void) 250 { 251 if (!cpu_is_omap34xx()) 252 return; 253 254 omap2_set_init_voltage("mpu_iva", "dpll1_ck", "mpu"); 255 omap2_set_init_voltage("core", "l3_ick", "l3_main"); 256 } 257 258 static void __init omap4_init_voltages(void) 259 { 260 if (!cpu_is_omap44xx()) 261 return; 262 263 omap2_set_init_voltage("mpu", "dpll_mpu_ck", "mpu"); 264 omap2_set_init_voltage("core", "l3_div_ck", "l3_main_1"); 265 omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva"); 266 } 267 268 static int __init omap2_common_pm_init(void) 269 { 270 if (!of_have_populated_dt()) 271 omap2_init_processor_devices(); 272 omap_pm_if_init(); 273 274 return 0; 275 } 276 omap_postcore_initcall(omap2_common_pm_init); 277 278 int __init omap2_common_pm_late_init(void) 279 { 280 /* 281 * In the case of DT, the PMIC and SR initialization will be done using 282 * a completely different mechanism. 283 * Disable this part if a DT blob is available. 284 */ 285 if (!of_have_populated_dt()) { 286 287 /* Init the voltage layer */ 288 omap_pmic_late_init(); 289 omap_voltage_late_init(); 290 291 /* Initialize the voltages */ 292 omap3_init_voltages(); 293 omap4_init_voltages(); 294 295 /* Smartreflex device init */ 296 omap_devinit_smartreflex(); 297 } 298 299 #ifdef CONFIG_SUSPEND 300 suspend_set_ops(&omap_pm_ops); 301 #endif 302 303 return 0; 304 } 305