1 /* 2 * Amstrad E3 FIQ handling 3 * 4 * Copyright (C) 2009 Janusz Krzysztofik 5 * Copyright (c) 2006 Matt Callow 6 * Copyright (c) 2004 Amstrad Plc 7 * Copyright (C) 2001 RidgeRun, Inc. 8 * 9 * Parts of this code are taken from linux/arch/arm/mach-omap/irq.c 10 * in the MontaVista 2.4 kernel (and the Amstrad changes therein) 11 * 12 * This program is free software; you can redistribute it and/or modify it 13 * under the terms of the GNU General Public License version 2 as published by 14 * the Free Software Foundation. 15 */ 16 #include <linux/gpio.h> 17 #include <linux/interrupt.h> 18 #include <linux/irq.h> 19 #include <linux/module.h> 20 #include <linux/io.h> 21 22 #include <mach/board-ams-delta.h> 23 24 #include <asm/fiq.h> 25 26 #include <mach/ams-delta-fiq.h> 27 28 static struct fiq_handler fh = { 29 .name = "ams-delta-fiq" 30 }; 31 32 /* 33 * This buffer is shared between FIQ and IRQ contexts. 34 * The FIQ and IRQ isrs can both read and write it. 35 * It is structured as a header section several 32bit slots, 36 * followed by the circular buffer where the FIQ isr stores 37 * keystrokes received from the qwerty keyboard. 38 * See ams-delta-fiq.h for details of offsets. 39 */ 40 unsigned int fiq_buffer[1024]; 41 EXPORT_SYMBOL(fiq_buffer); 42 43 static unsigned int irq_counter[16]; 44 45 static irqreturn_t deferred_fiq(int irq, void *dev_id) 46 { 47 struct irq_desc *irq_desc; 48 struct irq_chip *irq_chip = NULL; 49 int gpio, irq_num, fiq_count; 50 51 irq_desc = irq_to_desc(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK)); 52 if (irq_desc) 53 irq_chip = irq_desc->irq_data.chip; 54 55 /* 56 * For each handled GPIO interrupt, keep calling its interrupt handler 57 * until the IRQ counter catches the FIQ incremented interrupt counter. 58 */ 59 for (gpio = AMS_DELTA_GPIO_PIN_KEYBRD_CLK; 60 gpio <= AMS_DELTA_GPIO_PIN_HOOK_SWITCH; gpio++) { 61 irq_num = gpio_to_irq(gpio); 62 fiq_count = fiq_buffer[FIQ_CNT_INT_00 + gpio]; 63 64 while (irq_counter[gpio] < fiq_count) { 65 if (gpio != AMS_DELTA_GPIO_PIN_KEYBRD_CLK) { 66 struct irq_data *d = irq_get_irq_data(irq_num); 67 68 /* 69 * It looks like handle_edge_irq() that 70 * OMAP GPIO edge interrupts default to, 71 * expects interrupt already unmasked. 72 */ 73 if (irq_chip && irq_chip->irq_unmask) 74 irq_chip->irq_unmask(d); 75 } 76 generic_handle_irq(irq_num); 77 78 irq_counter[gpio]++; 79 } 80 } 81 return IRQ_HANDLED; 82 } 83 84 void __init ams_delta_init_fiq(void) 85 { 86 void *fiqhandler_start; 87 unsigned int fiqhandler_length; 88 struct pt_regs FIQ_regs; 89 unsigned long val, offset; 90 int i, retval; 91 92 fiqhandler_start = &qwerty_fiqin_start; 93 fiqhandler_length = &qwerty_fiqin_end - &qwerty_fiqin_start; 94 pr_info("Installing fiq handler from %p, length 0x%x\n", 95 fiqhandler_start, fiqhandler_length); 96 97 retval = claim_fiq(&fh); 98 if (retval) { 99 pr_err("ams_delta_init_fiq(): couldn't claim FIQ, ret=%d\n", 100 retval); 101 return; 102 } 103 104 retval = request_irq(INT_DEFERRED_FIQ, deferred_fiq, 105 IRQ_TYPE_EDGE_RISING, "deferred_fiq", NULL); 106 if (retval < 0) { 107 pr_err("Failed to get deferred_fiq IRQ, ret=%d\n", retval); 108 release_fiq(&fh); 109 return; 110 } 111 /* 112 * Since no set_type() method is provided by OMAP irq chip, 113 * switch to edge triggered interrupt type manually. 114 */ 115 offset = IRQ_ILR0_REG_OFFSET + INT_DEFERRED_FIQ * 0x4; 116 val = omap_readl(DEFERRED_FIQ_IH_BASE + offset) & ~(1 << 1); 117 omap_writel(val, DEFERRED_FIQ_IH_BASE + offset); 118 119 set_fiq_handler(fiqhandler_start, fiqhandler_length); 120 121 /* 122 * Initialise the buffer which is shared 123 * between FIQ mode and IRQ mode 124 */ 125 fiq_buffer[FIQ_GPIO_INT_MASK] = 0; 126 fiq_buffer[FIQ_MASK] = 0; 127 fiq_buffer[FIQ_STATE] = 0; 128 fiq_buffer[FIQ_KEY] = 0; 129 fiq_buffer[FIQ_KEYS_CNT] = 0; 130 fiq_buffer[FIQ_KEYS_HICNT] = 0; 131 fiq_buffer[FIQ_TAIL_OFFSET] = 0; 132 fiq_buffer[FIQ_HEAD_OFFSET] = 0; 133 fiq_buffer[FIQ_BUF_LEN] = 256; 134 fiq_buffer[FIQ_MISSED_KEYS] = 0; 135 fiq_buffer[FIQ_BUFFER_START] = 136 (unsigned int) &fiq_buffer[FIQ_CIRC_BUFF]; 137 138 for (i = FIQ_CNT_INT_00; i <= FIQ_CNT_INT_15; i++) 139 fiq_buffer[i] = 0; 140 141 /* 142 * FIQ mode r9 always points to the fiq_buffer, becauses the FIQ isr 143 * will run in an unpredictable context. The fiq_buffer is the FIQ isr's 144 * only means of communication with the IRQ level and other kernel 145 * context code. 146 */ 147 FIQ_regs.ARM_r9 = (unsigned int)fiq_buffer; 148 set_fiq_regs(&FIQ_regs); 149 150 pr_info("request_fiq(): fiq_buffer = %p\n", fiq_buffer); 151 152 /* 153 * Redirect GPIO interrupts to FIQ 154 */ 155 offset = IRQ_ILR0_REG_OFFSET + INT_GPIO_BANK1 * 0x4; 156 val = omap_readl(OMAP_IH1_BASE + offset) | 1; 157 omap_writel(val, OMAP_IH1_BASE + offset); 158 } 159