1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Amstrad E3 FIQ handling
4 *
5 * Copyright (C) 2009 Janusz Krzysztofik
6 * Copyright (c) 2006 Matt Callow
7 * Copyright (c) 2004 Amstrad Plc
8 * Copyright (C) 2001 RidgeRun, Inc.
9 *
10 * Parts of this code are taken from linux/arch/arm/mach-omap/irq.c
11 * in the MontaVista 2.4 kernel (and the Amstrad changes therein)
12 */
13 #include <linux/gpio/consumer.h>
14 #include <linux/gpio/machine.h>
15 #include <linux/gpio/driver.h>
16 #include <linux/interrupt.h>
17 #include <linux/irq.h>
18 #include <linux/module.h>
19 #include <linux/io.h>
20 #include <linux/platform_data/ams-delta-fiq.h>
21 #include <linux/platform_device.h>
22
23 #include <asm/fiq.h>
24 #include <linux/soc/ti/omap1-io.h>
25
26 #include "hardware.h"
27 #include "ams-delta-fiq.h"
28 #include "board-ams-delta.h"
29
30 static struct fiq_handler fh = {
31 .name = "ams-delta-fiq"
32 };
33
34 /*
35 * This buffer is shared between FIQ and IRQ contexts.
36 * The FIQ and IRQ isrs can both read and write it.
37 * It is structured as a header section several 32bit slots,
38 * followed by the circular buffer where the FIQ isr stores
39 * keystrokes received from the qwerty keyboard. See
40 * <linux/platform_data/ams-delta-fiq.h> for details of offsets.
41 */
42 static unsigned int fiq_buffer[1024];
43
44 static struct irq_chip *irq_chip;
45 static struct irq_data *irq_data[16];
46 static unsigned int irq_counter[16];
47
48 static const char *pin_name[16] __initconst = {
49 [AMS_DELTA_GPIO_PIN_KEYBRD_DATA] = "keybrd_data",
50 [AMS_DELTA_GPIO_PIN_KEYBRD_CLK] = "keybrd_clk",
51 };
52
deferred_fiq(int irq,void * dev_id)53 static irqreturn_t deferred_fiq(int irq, void *dev_id)
54 {
55 struct irq_data *d;
56 int gpio, irq_num, fiq_count;
57
58 /*
59 * For each handled GPIO interrupt, keep calling its interrupt handler
60 * until the IRQ counter catches the FIQ incremented interrupt counter.
61 */
62 for (gpio = AMS_DELTA_GPIO_PIN_KEYBRD_CLK;
63 gpio <= AMS_DELTA_GPIO_PIN_HOOK_SWITCH; gpio++) {
64 d = irq_data[gpio];
65 irq_num = d->irq;
66 fiq_count = fiq_buffer[FIQ_CNT_INT_00 + gpio];
67
68 if (irq_counter[gpio] < fiq_count &&
69 gpio != AMS_DELTA_GPIO_PIN_KEYBRD_CLK) {
70 /*
71 * handle_simple_irq() that OMAP GPIO edge
72 * interrupts default to since commit 80ac93c27441
73 * requires interrupt already acked and unmasked.
74 */
75 if (!WARN_ON_ONCE(!irq_chip->irq_unmask))
76 irq_chip->irq_unmask(d);
77 }
78 for (; irq_counter[gpio] < fiq_count; irq_counter[gpio]++)
79 generic_handle_irq(irq_num);
80 }
81 return IRQ_HANDLED;
82 }
83
ams_delta_init_fiq(struct gpio_chip * chip,struct platform_device * serio)84 void __init ams_delta_init_fiq(struct gpio_chip *chip,
85 struct platform_device *serio)
86 {
87 struct gpio_desc *gpiod, *data = NULL, *clk = NULL;
88 void *fiqhandler_start;
89 unsigned int fiqhandler_length;
90 struct pt_regs FIQ_regs;
91 unsigned long val, offset;
92 int i, retval;
93
94 /* Store irq_chip location for IRQ handler use */
95 irq_chip = chip->irq.chip;
96 if (!irq_chip) {
97 pr_err("%s: GPIO chip %s is missing IRQ function\n", __func__,
98 chip->label);
99 return;
100 }
101
102 for (i = 0; i < ARRAY_SIZE(irq_data); i++) {
103 gpiod = gpiochip_request_own_desc(chip, i, pin_name[i],
104 GPIO_ACTIVE_HIGH, GPIOD_IN);
105 if (IS_ERR(gpiod)) {
106 pr_err("%s: failed to get GPIO pin %d (%ld)\n",
107 __func__, i, PTR_ERR(gpiod));
108 return;
109 }
110 /* Store irq_data location for IRQ handler use */
111 irq_data[i] = irq_get_irq_data(gpiod_to_irq(gpiod));
112
113 /*
114 * FIQ handler takes full control over serio data and clk GPIO
115 * pins. Initialize them and keep requested so nobody can
116 * interfere. Fail if any of those two couldn't be requested.
117 */
118 switch (i) {
119 case AMS_DELTA_GPIO_PIN_KEYBRD_DATA:
120 data = gpiod;
121 gpiod_direction_input(data);
122 break;
123 case AMS_DELTA_GPIO_PIN_KEYBRD_CLK:
124 clk = gpiod;
125 gpiod_direction_input(clk);
126 break;
127 default:
128 gpiochip_free_own_desc(gpiod);
129 break;
130 }
131 }
132 if (!data || !clk)
133 goto out_gpio;
134
135 fiqhandler_start = &qwerty_fiqin_start;
136 fiqhandler_length = &qwerty_fiqin_end - &qwerty_fiqin_start;
137 pr_info("Installing fiq handler from %p, length 0x%x\n",
138 fiqhandler_start, fiqhandler_length);
139
140 retval = claim_fiq(&fh);
141 if (retval) {
142 pr_err("ams_delta_init_fiq(): couldn't claim FIQ, ret=%d\n",
143 retval);
144 goto out_gpio;
145 }
146
147 retval = request_irq(INT_DEFERRED_FIQ, deferred_fiq,
148 IRQ_TYPE_EDGE_RISING, "deferred_fiq", NULL);
149 if (retval < 0) {
150 pr_err("Failed to get deferred_fiq IRQ, ret=%d\n", retval);
151 release_fiq(&fh);
152 goto out_gpio;
153 }
154 /*
155 * Since no set_type() method is provided by OMAP irq chip,
156 * switch to edge triggered interrupt type manually.
157 */
158 offset = IRQ_ILR0_REG_OFFSET +
159 ((INT_DEFERRED_FIQ - NR_IRQS_LEGACY) & 0x1f) * 0x4;
160 val = omap_readl(DEFERRED_FIQ_IH_BASE + offset) & ~(1 << 1);
161 omap_writel(val, DEFERRED_FIQ_IH_BASE + offset);
162
163 set_fiq_handler(fiqhandler_start, fiqhandler_length);
164
165 /*
166 * Initialise the buffer which is shared
167 * between FIQ mode and IRQ mode
168 */
169 fiq_buffer[FIQ_GPIO_INT_MASK] = 0;
170 fiq_buffer[FIQ_MASK] = 0;
171 fiq_buffer[FIQ_STATE] = 0;
172 fiq_buffer[FIQ_KEY] = 0;
173 fiq_buffer[FIQ_KEYS_CNT] = 0;
174 fiq_buffer[FIQ_KEYS_HICNT] = 0;
175 fiq_buffer[FIQ_TAIL_OFFSET] = 0;
176 fiq_buffer[FIQ_HEAD_OFFSET] = 0;
177 fiq_buffer[FIQ_BUF_LEN] = 256;
178 fiq_buffer[FIQ_MISSED_KEYS] = 0;
179 fiq_buffer[FIQ_BUFFER_START] =
180 (unsigned int) &fiq_buffer[FIQ_CIRC_BUFF];
181
182 for (i = FIQ_CNT_INT_00; i <= FIQ_CNT_INT_15; i++)
183 fiq_buffer[i] = 0;
184
185 /*
186 * FIQ mode r9 always points to the fiq_buffer, because the FIQ isr
187 * will run in an unpredictable context. The fiq_buffer is the FIQ isr's
188 * only means of communication with the IRQ level and other kernel
189 * context code.
190 */
191 FIQ_regs.ARM_r9 = (unsigned int)fiq_buffer;
192 set_fiq_regs(&FIQ_regs);
193
194 pr_info("request_fiq(): fiq_buffer = %p\n", fiq_buffer);
195
196 /*
197 * Redirect GPIO interrupts to FIQ
198 */
199 offset = IRQ_ILR0_REG_OFFSET + (INT_GPIO_BANK1 - NR_IRQS_LEGACY) * 0x4;
200 val = omap_readl(OMAP_IH1_BASE + offset) | 1;
201 omap_writel(val, OMAP_IH1_BASE + offset);
202
203 /* Initialize serio device IRQ resource and platform_data */
204 serio->resource[0].start = gpiod_to_irq(clk);
205 serio->resource[0].end = serio->resource[0].start;
206 serio->dev.platform_data = fiq_buffer;
207
208 /*
209 * Since FIQ handler performs handling of GPIO registers for
210 * "keybrd_clk" IRQ pin, ams_delta_serio driver used to set
211 * handle_simple_irq() as active IRQ handler for that pin to avoid
212 * bad interaction with gpio-omap driver. This is no longer needed
213 * as handle_simple_irq() is now the default handler for OMAP GPIO
214 * edge interrupts.
215 * This comment replaces the obsolete code which has been removed
216 * from the ams_delta_serio driver and stands here only as a reminder
217 * of that dependency on gpio-omap driver behavior.
218 */
219
220 return;
221
222 out_gpio:
223 if (data)
224 gpiochip_free_own_desc(data);
225 if (clk)
226 gpiochip_free_own_desc(clk);
227 }
228