1 /* 2 * Amstrad E3 FIQ handling 3 * 4 * Copyright (C) 2009 Janusz Krzysztofik 5 * Copyright (c) 2006 Matt Callow 6 * Copyright (c) 2004 Amstrad Plc 7 * Copyright (C) 2001 RidgeRun, Inc. 8 * 9 * Parts of this code are taken from linux/arch/arm/mach-omap/irq.c 10 * in the MontaVista 2.4 kernel (and the Amstrad changes therein) 11 * 12 * This program is free software; you can redistribute it and/or modify it 13 * under the terms of the GNU General Public License version 2 as published by 14 * the Free Software Foundation. 15 */ 16 #include <linux/gpio.h> 17 #include <linux/interrupt.h> 18 #include <linux/irq.h> 19 #include <linux/module.h> 20 #include <linux/io.h> 21 22 #include <plat/board-ams-delta.h> 23 24 #include <asm/fiq.h> 25 #include <mach/ams-delta-fiq.h> 26 27 static struct fiq_handler fh = { 28 .name = "ams-delta-fiq" 29 }; 30 31 /* 32 * This buffer is shared between FIQ and IRQ contexts. 33 * The FIQ and IRQ isrs can both read and write it. 34 * It is structured as a header section several 32bit slots, 35 * followed by the circular buffer where the FIQ isr stores 36 * keystrokes received from the qwerty keyboard. 37 * See ams-delta-fiq.h for details of offsets. 38 */ 39 unsigned int fiq_buffer[1024]; 40 EXPORT_SYMBOL(fiq_buffer); 41 42 static unsigned int irq_counter[16]; 43 44 static irqreturn_t deferred_fiq(int irq, void *dev_id) 45 { 46 struct irq_desc *irq_desc; 47 struct irq_chip *irq_chip = NULL; 48 int gpio, irq_num, fiq_count; 49 50 irq_desc = irq_to_desc(IH_GPIO_BASE); 51 if (irq_desc) 52 irq_chip = irq_desc->irq_data.chip; 53 54 /* 55 * For each handled GPIO interrupt, keep calling its interrupt handler 56 * until the IRQ counter catches the FIQ incremented interrupt counter. 57 */ 58 for (gpio = AMS_DELTA_GPIO_PIN_KEYBRD_CLK; 59 gpio <= AMS_DELTA_GPIO_PIN_HOOK_SWITCH; gpio++) { 60 irq_num = gpio_to_irq(gpio); 61 fiq_count = fiq_buffer[FIQ_CNT_INT_00 + gpio]; 62 63 while (irq_counter[gpio] < fiq_count) { 64 if (gpio != AMS_DELTA_GPIO_PIN_KEYBRD_CLK) { 65 struct irq_data *d = irq_get_irq_data(irq_num); 66 67 /* 68 * It looks like handle_edge_irq() that 69 * OMAP GPIO edge interrupts default to, 70 * expects interrupt already unmasked. 71 */ 72 if (irq_chip && irq_chip->irq_unmask) 73 irq_chip->irq_unmask(d); 74 } 75 generic_handle_irq(irq_num); 76 77 irq_counter[gpio]++; 78 } 79 } 80 return IRQ_HANDLED; 81 } 82 83 void __init ams_delta_init_fiq(void) 84 { 85 void *fiqhandler_start; 86 unsigned int fiqhandler_length; 87 struct pt_regs FIQ_regs; 88 unsigned long val, offset; 89 int i, retval; 90 91 fiqhandler_start = &qwerty_fiqin_start; 92 fiqhandler_length = &qwerty_fiqin_end - &qwerty_fiqin_start; 93 pr_info("Installing fiq handler from %p, length 0x%x\n", 94 fiqhandler_start, fiqhandler_length); 95 96 retval = claim_fiq(&fh); 97 if (retval) { 98 pr_err("ams_delta_init_fiq(): couldn't claim FIQ, ret=%d\n", 99 retval); 100 return; 101 } 102 103 retval = request_irq(INT_DEFERRED_FIQ, deferred_fiq, 104 IRQ_TYPE_EDGE_RISING, "deferred_fiq", 0); 105 if (retval < 0) { 106 pr_err("Failed to get deferred_fiq IRQ, ret=%d\n", retval); 107 release_fiq(&fh); 108 return; 109 } 110 /* 111 * Since no set_type() method is provided by OMAP irq chip, 112 * switch to edge triggered interrupt type manually. 113 */ 114 offset = IRQ_ILR0_REG_OFFSET + INT_DEFERRED_FIQ * 0x4; 115 val = omap_readl(DEFERRED_FIQ_IH_BASE + offset) & ~(1 << 1); 116 omap_writel(val, DEFERRED_FIQ_IH_BASE + offset); 117 118 set_fiq_handler(fiqhandler_start, fiqhandler_length); 119 120 /* 121 * Initialise the buffer which is shared 122 * between FIQ mode and IRQ mode 123 */ 124 fiq_buffer[FIQ_GPIO_INT_MASK] = 0; 125 fiq_buffer[FIQ_MASK] = 0; 126 fiq_buffer[FIQ_STATE] = 0; 127 fiq_buffer[FIQ_KEY] = 0; 128 fiq_buffer[FIQ_KEYS_CNT] = 0; 129 fiq_buffer[FIQ_KEYS_HICNT] = 0; 130 fiq_buffer[FIQ_TAIL_OFFSET] = 0; 131 fiq_buffer[FIQ_HEAD_OFFSET] = 0; 132 fiq_buffer[FIQ_BUF_LEN] = 256; 133 fiq_buffer[FIQ_MISSED_KEYS] = 0; 134 fiq_buffer[FIQ_BUFFER_START] = 135 (unsigned int) &fiq_buffer[FIQ_CIRC_BUFF]; 136 137 for (i = FIQ_CNT_INT_00; i <= FIQ_CNT_INT_15; i++) 138 fiq_buffer[i] = 0; 139 140 /* 141 * FIQ mode r9 always points to the fiq_buffer, becauses the FIQ isr 142 * will run in an unpredictable context. The fiq_buffer is the FIQ isr's 143 * only means of communication with the IRQ level and other kernel 144 * context code. 145 */ 146 FIQ_regs.ARM_r9 = (unsigned int)fiq_buffer; 147 set_fiq_regs(&FIQ_regs); 148 149 pr_info("request_fiq(): fiq_buffer = %p\n", fiq_buffer); 150 151 /* 152 * Redirect GPIO interrupts to FIQ 153 */ 154 offset = IRQ_ILR0_REG_OFFSET + INT_GPIO_BANK1 * 0x4; 155 val = omap_readl(OMAP_IH1_BASE + offset) | 1; 156 omap_writel(val, OMAP_IH1_BASE + offset); 157 } 158