xref: /openbmc/linux/arch/arm/mach-mvebu/kirkwood.c (revision 0bf49ffb)
1 /*
2  * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
3  *
4  * arch/arm/mach-mvebu/kirkwood.c
5  *
6  * Flattened Device Tree board initialization
7  *
8  * This file is licensed under the terms of the GNU General Public
9  * License version 2.  This program is licensed "as is" without any
10  * warranty of any kind, whether express or implied.
11  */
12 
13 #include <linux/clk.h>
14 #include <linux/kernel.h>
15 #include <linux/init.h>
16 #include <linux/mbus.h>
17 #include <linux/of.h>
18 #include <linux/of_address.h>
19 #include <linux/of_net.h>
20 #include <linux/of_platform.h>
21 #include <linux/slab.h>
22 #include <asm/hardware/cache-feroceon-l2.h>
23 #include <asm/mach/arch.h>
24 #include <asm/mach/map.h>
25 #include "kirkwood.h"
26 #include "kirkwood-pm.h"
27 #include "common.h"
28 
29 static struct resource kirkwood_cpufreq_resources[] = {
30 	[0] = {
31 		.start  = CPU_CONTROL_PHYS,
32 		.end    = CPU_CONTROL_PHYS + 3,
33 		.flags  = IORESOURCE_MEM,
34 	},
35 };
36 
37 static struct platform_device kirkwood_cpufreq_device = {
38 	.name		= "kirkwood-cpufreq",
39 	.id		= -1,
40 	.num_resources	= ARRAY_SIZE(kirkwood_cpufreq_resources),
41 	.resource	= kirkwood_cpufreq_resources,
42 };
43 
44 static void __init kirkwood_cpufreq_init(void)
45 {
46 	platform_device_register(&kirkwood_cpufreq_device);
47 }
48 
49 static struct resource kirkwood_cpuidle_resource[] = {
50 	{
51 		.flags	= IORESOURCE_MEM,
52 		.start	= DDR_OPERATION_BASE,
53 		.end	= DDR_OPERATION_BASE + 3,
54 	},
55 };
56 
57 static struct platform_device kirkwood_cpuidle = {
58 	.name		= "kirkwood_cpuidle",
59 	.id		= -1,
60 	.resource	= kirkwood_cpuidle_resource,
61 	.num_resources	= 1,
62 };
63 
64 static void __init kirkwood_cpuidle_init(void)
65 {
66 	platform_device_register(&kirkwood_cpuidle);
67 }
68 
69 #define MV643XX_ETH_MAC_ADDR_LOW	0x0414
70 #define MV643XX_ETH_MAC_ADDR_HIGH	0x0418
71 
72 static void __init kirkwood_dt_eth_fixup(void)
73 {
74 	struct device_node *np;
75 
76 	/*
77 	 * The ethernet interfaces forget the MAC address assigned by u-boot
78 	 * if the clocks are turned off. Usually, u-boot on kirkwood boards
79 	 * has no DT support to properly set local-mac-address property.
80 	 * As a workaround, we get the MAC address from mv643xx_eth registers
81 	 * and update the port device node if no valid MAC address is set.
82 	 */
83 	for_each_compatible_node(np, NULL, "marvell,kirkwood-eth-port") {
84 		struct device_node *pnp = of_get_parent(np);
85 		struct clk *clk;
86 		struct property *pmac;
87 		void __iomem *io;
88 		u8 *macaddr;
89 		u32 reg;
90 
91 		if (!pnp)
92 			continue;
93 
94 		/* skip disabled nodes or nodes with valid MAC address*/
95 		if (!of_device_is_available(pnp) ||
96 		    !IS_ERR(of_get_mac_address(np)))
97 			goto eth_fixup_skip;
98 
99 		clk = of_clk_get(pnp, 0);
100 		if (IS_ERR(clk))
101 			goto eth_fixup_skip;
102 
103 		io = of_iomap(pnp, 0);
104 		if (!io)
105 			goto eth_fixup_no_map;
106 
107 		/* ensure port clock is not gated to not hang CPU */
108 		clk_prepare_enable(clk);
109 
110 		/* store MAC address register contents in local-mac-address */
111 		pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL);
112 		if (!pmac)
113 			goto eth_fixup_no_mem;
114 
115 		pmac->value = pmac + 1;
116 		pmac->length = 6;
117 		pmac->name = kstrdup("local-mac-address", GFP_KERNEL);
118 		if (!pmac->name) {
119 			kfree(pmac);
120 			goto eth_fixup_no_mem;
121 		}
122 
123 		macaddr = pmac->value;
124 		reg = readl(io + MV643XX_ETH_MAC_ADDR_HIGH);
125 		macaddr[0] = (reg >> 24) & 0xff;
126 		macaddr[1] = (reg >> 16) & 0xff;
127 		macaddr[2] = (reg >> 8) & 0xff;
128 		macaddr[3] = reg & 0xff;
129 
130 		reg = readl(io + MV643XX_ETH_MAC_ADDR_LOW);
131 		macaddr[4] = (reg >> 8) & 0xff;
132 		macaddr[5] = reg & 0xff;
133 
134 		of_update_property(np, pmac);
135 
136 eth_fixup_no_mem:
137 		iounmap(io);
138 		clk_disable_unprepare(clk);
139 eth_fixup_no_map:
140 		clk_put(clk);
141 eth_fixup_skip:
142 		of_node_put(pnp);
143 	}
144 }
145 
146 /*
147  * Disable propagation of mbus errors to the CPU local bus, as this
148  * causes mbus errors (which can occur for example for PCI aborts) to
149  * throw CPU aborts, which we're not set up to deal with.
150  */
151 static void kirkwood_disable_mbus_error_propagation(void)
152 {
153 	void __iomem *cpu_config;
154 
155 	cpu_config = ioremap(CPU_CONFIG_PHYS, 4);
156 	writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config);
157 }
158 
159 static struct of_dev_auxdata auxdata[] __initdata = {
160 	OF_DEV_AUXDATA("marvell,kirkwood-audio", 0xf10a0000,
161 		       "mvebu-audio", NULL),
162 	{ /* sentinel */ }
163 };
164 
165 static void __init kirkwood_dt_init(void)
166 {
167 	kirkwood_disable_mbus_error_propagation();
168 
169 	BUG_ON(mvebu_mbus_dt_init(false));
170 
171 #ifdef CONFIG_CACHE_FEROCEON_L2
172 	feroceon_of_init();
173 #endif
174 	kirkwood_cpufreq_init();
175 	kirkwood_cpuidle_init();
176 
177 	kirkwood_pm_init();
178 	kirkwood_dt_eth_fixup();
179 
180 	of_platform_default_populate(NULL, auxdata, NULL);
181 }
182 
183 static const char * const kirkwood_dt_board_compat[] __initconst = {
184 	"marvell,kirkwood",
185 	NULL
186 };
187 
188 DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
189 	/* Maintainer: Jason Cooper <jason@lakedaemon.net> */
190 	.init_machine	= kirkwood_dt_init,
191 	.restart	= mvebu_restart,
192 	.dt_compat	= kirkwood_dt_board_compat,
193 MACHINE_END
194