xref: /openbmc/linux/arch/arm/mach-mvebu/kirkwood.c (revision a2773f3d)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
4  *
5  * arch/arm/mach-mvebu/kirkwood.c
6  *
7  * Flattened Device Tree board initialization
8  */
9 
10 #include <linux/clk.h>
11 #include <linux/kernel.h>
12 #include <linux/init.h>
13 #include <linux/mbus.h>
14 #include <linux/of.h>
15 #include <linux/of_address.h>
16 #include <linux/of_net.h>
17 #include <linux/of_platform.h>
18 #include <linux/platform_device.h>
19 #include <linux/slab.h>
20 #include <asm/hardware/cache-feroceon-l2.h>
21 #include <asm/mach/arch.h>
22 #include <asm/mach/map.h>
23 #include "kirkwood.h"
24 #include "kirkwood-pm.h"
25 #include "common.h"
26 
27 static struct resource kirkwood_cpufreq_resources[] = {
28 	[0] = {
29 		.start  = CPU_CONTROL_PHYS,
30 		.end    = CPU_CONTROL_PHYS + 3,
31 		.flags  = IORESOURCE_MEM,
32 	},
33 };
34 
35 static struct platform_device kirkwood_cpufreq_device = {
36 	.name		= "kirkwood-cpufreq",
37 	.id		= -1,
38 	.num_resources	= ARRAY_SIZE(kirkwood_cpufreq_resources),
39 	.resource	= kirkwood_cpufreq_resources,
40 };
41 
kirkwood_cpufreq_init(void)42 static void __init kirkwood_cpufreq_init(void)
43 {
44 	platform_device_register(&kirkwood_cpufreq_device);
45 }
46 
47 static struct resource kirkwood_cpuidle_resource[] = {
48 	{
49 		.flags	= IORESOURCE_MEM,
50 		.start	= DDR_OPERATION_BASE,
51 		.end	= DDR_OPERATION_BASE + 3,
52 	},
53 };
54 
55 static struct platform_device kirkwood_cpuidle = {
56 	.name		= "kirkwood_cpuidle",
57 	.id		= -1,
58 	.resource	= kirkwood_cpuidle_resource,
59 	.num_resources	= 1,
60 };
61 
kirkwood_cpuidle_init(void)62 static void __init kirkwood_cpuidle_init(void)
63 {
64 	platform_device_register(&kirkwood_cpuidle);
65 }
66 
67 #define MV643XX_ETH_MAC_ADDR_LOW	0x0414
68 #define MV643XX_ETH_MAC_ADDR_HIGH	0x0418
69 
kirkwood_dt_eth_fixup(void)70 static void __init kirkwood_dt_eth_fixup(void)
71 {
72 	struct device_node *np;
73 
74 	/*
75 	 * The ethernet interfaces forget the MAC address assigned by u-boot
76 	 * if the clocks are turned off. Usually, u-boot on kirkwood boards
77 	 * has no DT support to properly set local-mac-address property.
78 	 * As a workaround, we get the MAC address from mv643xx_eth registers
79 	 * and update the port device node if no valid MAC address is set.
80 	 */
81 	for_each_compatible_node(np, NULL, "marvell,kirkwood-eth-port") {
82 		struct device_node *pnp = of_get_parent(np);
83 		struct clk *clk;
84 		struct property *pmac;
85 		u8 tmpmac[ETH_ALEN];
86 		void __iomem *io;
87 		u8 *macaddr;
88 		u32 reg;
89 
90 		if (!pnp)
91 			continue;
92 
93 		/* skip disabled nodes or nodes with valid MAC address*/
94 		if (!of_device_is_available(pnp) ||
95 		    !of_get_mac_address(np, tmpmac))
96 			goto eth_fixup_skip;
97 
98 		clk = of_clk_get(pnp, 0);
99 		if (IS_ERR(clk))
100 			goto eth_fixup_skip;
101 
102 		io = of_iomap(pnp, 0);
103 		if (!io)
104 			goto eth_fixup_no_map;
105 
106 		/* ensure port clock is not gated to not hang CPU */
107 		clk_prepare_enable(clk);
108 
109 		/* store MAC address register contents in local-mac-address */
110 		pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL);
111 		if (!pmac)
112 			goto eth_fixup_no_mem;
113 
114 		pmac->value = pmac + 1;
115 		pmac->length = 6;
116 		pmac->name = kstrdup("local-mac-address", GFP_KERNEL);
117 		if (!pmac->name) {
118 			kfree(pmac);
119 			goto eth_fixup_no_mem;
120 		}
121 
122 		macaddr = pmac->value;
123 		reg = readl(io + MV643XX_ETH_MAC_ADDR_HIGH);
124 		macaddr[0] = (reg >> 24) & 0xff;
125 		macaddr[1] = (reg >> 16) & 0xff;
126 		macaddr[2] = (reg >> 8) & 0xff;
127 		macaddr[3] = reg & 0xff;
128 
129 		reg = readl(io + MV643XX_ETH_MAC_ADDR_LOW);
130 		macaddr[4] = (reg >> 8) & 0xff;
131 		macaddr[5] = reg & 0xff;
132 
133 		of_update_property(np, pmac);
134 
135 eth_fixup_no_mem:
136 		iounmap(io);
137 		clk_disable_unprepare(clk);
138 eth_fixup_no_map:
139 		clk_put(clk);
140 eth_fixup_skip:
141 		of_node_put(pnp);
142 	}
143 }
144 
145 /*
146  * Disable propagation of mbus errors to the CPU local bus, as this
147  * causes mbus errors (which can occur for example for PCI aborts) to
148  * throw CPU aborts, which we're not set up to deal with.
149  */
kirkwood_disable_mbus_error_propagation(void)150 static void kirkwood_disable_mbus_error_propagation(void)
151 {
152 	void __iomem *cpu_config;
153 
154 	cpu_config = ioremap(CPU_CONFIG_PHYS, 4);
155 	writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config);
156 }
157 
158 static struct of_dev_auxdata auxdata[] __initdata = {
159 	OF_DEV_AUXDATA("marvell,kirkwood-audio", 0xf10a0000,
160 		       "mvebu-audio", NULL),
161 	{ /* sentinel */ }
162 };
163 
kirkwood_dt_init(void)164 static void __init kirkwood_dt_init(void)
165 {
166 	kirkwood_disable_mbus_error_propagation();
167 
168 	BUG_ON(mvebu_mbus_dt_init(false));
169 
170 #ifdef CONFIG_CACHE_FEROCEON_L2
171 	feroceon_of_init();
172 #endif
173 	kirkwood_cpufreq_init();
174 	kirkwood_cpuidle_init();
175 
176 	kirkwood_pm_init();
177 	kirkwood_dt_eth_fixup();
178 
179 	of_platform_default_populate(NULL, auxdata, NULL);
180 }
181 
182 static const char * const kirkwood_dt_board_compat[] __initconst = {
183 	"marvell,kirkwood",
184 	NULL
185 };
186 
187 DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
188 	/* Maintainer: Jason Cooper <jason@lakedaemon.net> */
189 	.init_machine	= kirkwood_dt_init,
190 	.restart	= mvebu_restart,
191 	.dt_compat	= kirkwood_dt_board_compat,
192 MACHINE_END
193