1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Device Tree common file for LaCie 2Big and 5Big Network v2 4 * 5 * Copyright (C) 2014 6 * 7 * Andrew Lunn <andrew@lunn.ch> 8 * 9 * Based on netxbig_v2-setup.c, 10 * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> 11 * 12*/ 13 14#include <dt-bindings/leds/leds-netxbig.h> 15#include "kirkwood.dtsi" 16#include "kirkwood-6281.dtsi" 17 18/ { 19 chosen { 20 bootargs = "console=ttyS0,115200n8"; 21 stdout-path = &uart0; 22 }; 23 24 ocp@f1000000 { 25 serial@12000 { 26 status = "okay"; 27 }; 28 29 spi@10600 { 30 status = "okay"; 31 32 flash@0 { 33 #address-cells = <1>; 34 #size-cells = <1>; 35 compatible = "mxicy,mx25l4005a", "jedec,spi-nor"; 36 reg = <0>; 37 spi-max-frequency = <20000000>; 38 mode = <0>; 39 40 partition@0 { 41 reg = <0x0 0x80000>; 42 label = "u-boot"; 43 }; 44 }; 45 }; 46 47 sata@80000 { 48 status = "okay"; 49 nr-ports = <2>; 50 }; 51 52 }; 53 54 gpio-keys { 55 compatible = "gpio-keys"; 56 #address-cells = <1>; 57 #size-cells = <0>; 58 59 /* 60 * esc and power represent a three position rocker 61 * switch. Thus the conventional KEY_POWER does not fit 62 */ 63 exc { 64 label = "Back power switch (on|auto)"; 65 linux,code = <KEY_ESC>; 66 linux,input-type = <5>; 67 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; 68 }; 69 power { 70 label = "Back power switch (auto|off)"; 71 linux,code = <KEY_1>; 72 linux,input-type = <5>; 73 gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; 74 }; 75 option { 76 label = "Function button"; 77 linux,code = <KEY_OPTION>; 78 gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; 79 }; 80 81 }; 82 83 gpio-poweroff { 84 compatible = "gpio-poweroff"; 85 gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; 86 }; 87 88 regulators: regulators { 89 status = "okay"; 90 compatible = "simple-bus"; 91 #address-cells = <1>; 92 #size-cells = <0>; 93 pinctrl-names = "default"; 94 95 regulator@1 { 96 compatible = "regulator-fixed"; 97 reg = <1>; 98 regulator-name = "hdd0power"; 99 regulator-min-microvolt = <5000000>; 100 regulator-max-microvolt = <5000000>; 101 enable-active-high; 102 regulator-always-on; 103 regulator-boot-on; 104 gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>; 105 }; 106 }; 107 108 netxbig_gpio_ext: netxbig-gpio-ext { 109 compatible = "lacie,netxbig-gpio-ext"; 110 111 addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH 112 &gpio1 16 GPIO_ACTIVE_HIGH 113 &gpio1 17 GPIO_ACTIVE_HIGH>; 114 data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH 115 &gpio1 13 GPIO_ACTIVE_HIGH 116 &gpio1 14 GPIO_ACTIVE_HIGH>; 117 enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; 118 }; 119 120 netxbig-leds { 121 compatible = "lacie,netxbig-leds"; 122 123 gpio-ext = <&netxbig_gpio_ext>; 124 125 timers = <NETXBIG_LED_TIMER1 500 500 126 NETXBIG_LED_TIMER2 500 1000>; 127 128 blue-power { 129 label = "netxbig:blue:power"; 130 mode-addr = <0>; 131 mode-val = <NETXBIG_LED_OFF 0 132 NETXBIG_LED_ON 1 133 NETXBIG_LED_TIMER1 3 134 NETXBIG_LED_TIMER2 7>; 135 bright-addr = <1>; 136 max-brightness = <7>; 137 }; 138 red-power { 139 label = "netxbig:red:power"; 140 mode-addr = <0>; 141 mode-val = <NETXBIG_LED_OFF 0 142 NETXBIG_LED_ON 2 143 NETXBIG_LED_TIMER1 4>; 144 bright-addr = <1>; 145 max-brightness = <7>; 146 }; 147 blue-sata0 { 148 label = "netxbig:blue:sata0"; 149 mode-addr = <3>; 150 mode-val = <NETXBIG_LED_OFF 0 151 NETXBIG_LED_ON 7 152 NETXBIG_LED_SATA 1 153 NETXBIG_LED_TIMER1 3>; 154 bright-addr = <2>; 155 max-brightness = <7>; 156 }; 157 red-sata0 { 158 label = "netxbig:red:sata0"; 159 mode-addr = <3>; 160 mode-val = <NETXBIG_LED_OFF 0 161 NETXBIG_LED_ON 2 162 NETXBIG_LED_TIMER1 4>; 163 bright-addr = <2>; 164 max-brightness = <7>; 165 }; 166 blue-sata1 { 167 label = "netxbig:blue:sata1"; 168 mode-addr = <4>; 169 mode-val = <NETXBIG_LED_OFF 0 170 NETXBIG_LED_ON 7 171 NETXBIG_LED_SATA 1 172 NETXBIG_LED_TIMER1 3>; 173 bright-addr = <2>; 174 max-brightness = <7>; 175 }; 176 red-sata1 { 177 label = "netxbig:red:sata1"; 178 mode-addr = <4>; 179 mode-val = <NETXBIG_LED_OFF 0 180 NETXBIG_LED_ON 2 181 NETXBIG_LED_TIMER1 4>; 182 bright-addr = <2>; 183 max-brightness = <7>; 184 }; 185 }; 186}; 187 188&mdio { 189 status = "okay"; 190 191 ethphy0: ethernet-phy@0 { 192 reg = <8>; 193 }; 194 195 ethphy1: ethernet-phy@1 { 196 reg = <0>; 197 }; 198}; 199 200ð0 { 201 status = "okay"; 202 ethernet0-port@0 { 203 phy-handle = <ðphy0>; 204 }; 205}; 206 207&pinctrl { 208 pinctrl-names = "default"; 209 210 pmx_button_function: pmx-button-function { 211 marvell,pins = "mpp34"; 212 marvell,function = "gpio"; 213 }; 214 pmx_button_power_off: pmx-button-power-off { 215 marvell,pins = "mpp15"; 216 marvell,function = "gpio"; 217 }; 218 pmx_button_power_on: pmx-button-power-on { 219 marvell,pins = "mpp13"; 220 marvell,function = "gpio"; 221 }; 222}; 223 224&i2c0 { 225 status = "okay"; 226 227 eeprom@50 { 228 compatible = "atmel,24c04"; 229 pagesize = <16>; 230 reg = <0x50>; 231 }; 232}; 233