1/*
2 * Copyright (C) 2016 James Pettigrew <james@innovum.com.au>
3 * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com>
4 *
5 * This file is dual-licensed: you can use it either under the terms
6 * of the GPL or the X11 license, at your option. Note that this dual
7 * licensing only applies to this file, and not this project as a
8 * whole.
9 *
10 *  a) This file is free software; you can redistribute it and/or
11 *     modify it under the terms of the GNU General Public License as
12 *     published by the Free Software Foundation; either version 2 of the
13 *     License, or (at your option) any later version.
14 *
15 *     This file is distributed in the hope that it will be useful,
16 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
17 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18 *     GNU General Public License for more details.
19 *
20 * Or, alternatively,
21 *
22 *  b) Permission is hereby granted, free of charge, to any person
23 *     obtaining a copy of this software and associated documentation
24 *     files (the "Software"), to deal in the Software without
25 *     restriction, including without limitation the rights to use,
26 *     copy, modify, merge, publish, distribute, sublicense, and/or
27 *     sell copies of the Software, and to permit persons to whom the
28 *     Software is furnished to do so, subject to the following
29 *     conditions:
30 *
31 *     The above copyright notice and this permission notice shall be
32 *     included in all copies or substantial portions of the Software.
33 *
34 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
35 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
36 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
37 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
38 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
39 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
40 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
41 *     OTHER DEALINGS IN THE SOFTWARE.
42 */
43
44/dts-v1/;
45#include "sun8i-h3.dtsi"
46#include "sunxi-common-regulators.dtsi"
47
48#include <dt-bindings/gpio/gpio.h>
49#include <dt-bindings/input/input.h>
50
51/ {
52	aliases {
53		serial0 = &uart0;
54	};
55
56	chosen {
57		stdout-path = "serial0:115200n8";
58	};
59
60	leds {
61		compatible = "gpio-leds";
62
63		led-0 {
64			label = "nanopi:blue:status";
65			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
66			linux,default-trigger = "heartbeat";
67		};
68
69		led-1 {
70			label = "nanopi:green:pwr";
71			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
72			default-state = "on";
73		};
74	};
75
76	gpio-keys {
77		compatible = "gpio-keys";
78
79		key-0 {
80			label = "k1";
81			linux,code = <KEY_POWER>;
82			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
83			wakeup-source;
84		};
85	};
86};
87
88&ehci3 {
89	status = "okay";
90};
91
92&mmc0 {
93	bus-width = <4>;
94	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
95	status = "okay";
96	vmmc-supply = <&reg_vcc3v3>;
97};
98
99&ohci3 {
100	status = "okay";
101};
102
103&uart0 {
104	pinctrl-names = "default";
105	pinctrl-0 = <&uart0_pa_pins>;
106	status = "okay";
107};
108
109&usbphy {
110	status = "okay";
111};
112