1config ARM 2 bool 3 default y 4 select ARCH_CLOCKSOURCE_DATA 5 select ARCH_HAS_DEBUG_VIRTUAL 6 select ARCH_HAS_DEVMEM_IS_ALLOWED 7 select ARCH_HAS_ELF_RANDOMIZE 8 select ARCH_HAS_SET_MEMORY 9 select ARCH_HAS_STRICT_KERNEL_RWX if MMU && !XIP_KERNEL 10 select ARCH_HAS_STRICT_MODULE_RWX if MMU 11 select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST 12 select ARCH_HAVE_CUSTOM_GPIO_H 13 select ARCH_HAS_GCOV_PROFILE_ALL 14 select ARCH_MIGHT_HAVE_PC_PARPORT 15 select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX 16 select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT if CPU_V7 17 select ARCH_SUPPORTS_ATOMIC_RMW 18 select ARCH_USE_BUILTIN_BSWAP 19 select ARCH_USE_CMPXCHG_LOCKREF 20 select ARCH_WANT_IPC_PARSE_VERSION 21 select BUILDTIME_EXTABLE_SORT if MMU 22 select CLONE_BACKWARDS 23 select CPU_PM if (SUSPEND || CPU_IDLE) 24 select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS 25 select DMA_NOOP_OPS if !MMU 26 select EDAC_SUPPORT 27 select EDAC_ATOMIC_SCRUB 28 select GENERIC_ALLOCATOR 29 select GENERIC_ARCH_TOPOLOGY if ARM_CPU_TOPOLOGY 30 select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI) 31 select GENERIC_CLOCKEVENTS_BROADCAST if SMP 32 select GENERIC_CPU_AUTOPROBE 33 select GENERIC_EARLY_IOREMAP 34 select GENERIC_IDLE_POLL_SETUP 35 select GENERIC_IRQ_PROBE 36 select GENERIC_IRQ_SHOW 37 select GENERIC_IRQ_SHOW_LEVEL 38 select GENERIC_PCI_IOMAP 39 select GENERIC_SCHED_CLOCK 40 select GENERIC_SMP_IDLE_THREAD 41 select GENERIC_STRNCPY_FROM_USER 42 select GENERIC_STRNLEN_USER 43 select HANDLE_DOMAIN_IRQ 44 select HARDIRQS_SW_RESEND 45 select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT) 46 select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6 47 select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU 48 select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU 49 select HAVE_ARCH_MMAP_RND_BITS if MMU 50 select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT) 51 select HAVE_ARCH_TRACEHOOK 52 select HAVE_ARM_SMCCC if CPU_V7 53 select HAVE_CBPF_JIT 54 select HAVE_CC_STACKPROTECTOR 55 select HAVE_CONTEXT_TRACKING 56 select HAVE_C_RECORDMCOUNT 57 select HAVE_DEBUG_KMEMLEAK 58 select HAVE_DMA_API_DEBUG 59 select HAVE_DMA_CONTIGUOUS if MMU 60 select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) && !CPU_ENDIAN_BE32 && MMU 61 select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE 62 select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU 63 select HAVE_EXIT_THREAD 64 select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL) 65 select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL) 66 select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) 67 select HAVE_GCC_PLUGINS 68 select HAVE_GENERIC_DMA_COHERENT 69 select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)) 70 select HAVE_IDE if PCI || ISA || PCMCIA 71 select HAVE_IRQ_TIME_ACCOUNTING 72 select HAVE_KERNEL_GZIP 73 select HAVE_KERNEL_LZ4 74 select HAVE_KERNEL_LZMA 75 select HAVE_KERNEL_LZO 76 select HAVE_KERNEL_XZ 77 select HAVE_KPROBES if !XIP_KERNEL && !CPU_ENDIAN_BE32 && !CPU_V7M 78 select HAVE_KRETPROBES if (HAVE_KPROBES) 79 select HAVE_MEMBLOCK 80 select HAVE_MOD_ARCH_SPECIFIC 81 select HAVE_NMI 82 select HAVE_OPROFILE if (HAVE_PERF_EVENTS) 83 select HAVE_OPTPROBES if !THUMB2_KERNEL 84 select HAVE_PERF_EVENTS 85 select HAVE_PERF_REGS 86 select HAVE_PERF_USER_STACK_DUMP 87 select HAVE_RCU_TABLE_FREE if (SMP && ARM_LPAE) 88 select HAVE_REGS_AND_STACK_ACCESS_API 89 select HAVE_SYSCALL_TRACEPOINTS 90 select HAVE_UID16 91 select HAVE_VIRT_CPU_ACCOUNTING_GEN 92 select IRQ_FORCED_THREADING 93 select MODULES_USE_ELF_REL 94 select NO_BOOTMEM 95 select OF_EARLY_FLATTREE if OF 96 select OF_RESERVED_MEM if OF 97 select OLD_SIGACTION 98 select OLD_SIGSUSPEND3 99 select PERF_USE_VMALLOC 100 select RTC_LIB 101 select SYS_SUPPORTS_APM_EMULATION 102 # Above selects are sorted alphabetically; please add new ones 103 # according to that. Thanks. 104 help 105 The ARM series is a line of low-power-consumption RISC chip designs 106 licensed by ARM Ltd and targeted at embedded applications and 107 handhelds such as the Compaq IPAQ. ARM-based PCs are no longer 108 manufactured, but legacy ARM-based PC hardware remains popular in 109 Europe. There is an ARM Linux project with a web page at 110 <http://www.arm.linux.org.uk/>. 111 112config ARM_HAS_SG_CHAIN 113 select ARCH_HAS_SG_CHAIN 114 bool 115 116config NEED_SG_DMA_LENGTH 117 bool 118 119config ARM_DMA_USE_IOMMU 120 bool 121 select ARM_HAS_SG_CHAIN 122 select NEED_SG_DMA_LENGTH 123 124if ARM_DMA_USE_IOMMU 125 126config ARM_DMA_IOMMU_ALIGNMENT 127 int "Maximum PAGE_SIZE order of alignment for DMA IOMMU buffers" 128 range 4 9 129 default 8 130 help 131 DMA mapping framework by default aligns all buffers to the smallest 132 PAGE_SIZE order which is greater than or equal to the requested buffer 133 size. This works well for buffers up to a few hundreds kilobytes, but 134 for larger buffers it just a waste of address space. Drivers which has 135 relatively small addressing window (like 64Mib) might run out of 136 virtual space with just a few allocations. 137 138 With this parameter you can specify the maximum PAGE_SIZE order for 139 DMA IOMMU buffers. Larger buffers will be aligned only to this 140 specified order. The order is expressed as a power of two multiplied 141 by the PAGE_SIZE. 142 143endif 144 145config MIGHT_HAVE_PCI 146 bool 147 148config SYS_SUPPORTS_APM_EMULATION 149 bool 150 151config HAVE_TCM 152 bool 153 select GENERIC_ALLOCATOR 154 155config HAVE_PROC_CPU 156 bool 157 158config NO_IOPORT_MAP 159 bool 160 161config EISA 162 bool 163 ---help--- 164 The Extended Industry Standard Architecture (EISA) bus was 165 developed as an open alternative to the IBM MicroChannel bus. 166 167 The EISA bus provided some of the features of the IBM MicroChannel 168 bus while maintaining backward compatibility with cards made for 169 the older ISA bus. The EISA bus saw limited use between 1988 and 170 1995 when it was made obsolete by the PCI bus. 171 172 Say Y here if you are building a kernel for an EISA-based machine. 173 174 Otherwise, say N. 175 176config SBUS 177 bool 178 179config STACKTRACE_SUPPORT 180 bool 181 default y 182 183config LOCKDEP_SUPPORT 184 bool 185 default y 186 187config TRACE_IRQFLAGS_SUPPORT 188 bool 189 default !CPU_V7M 190 191config RWSEM_XCHGADD_ALGORITHM 192 bool 193 default y 194 195config ARCH_HAS_ILOG2_U32 196 bool 197 198config ARCH_HAS_ILOG2_U64 199 bool 200 201config ARCH_HAS_BANDGAP 202 bool 203 204config FIX_EARLYCON_MEM 205 def_bool y if MMU 206 207config GENERIC_HWEIGHT 208 bool 209 default y 210 211config GENERIC_CALIBRATE_DELAY 212 bool 213 default y 214 215config ARCH_MAY_HAVE_PC_FDC 216 bool 217 218config ZONE_DMA 219 bool 220 221config NEED_DMA_MAP_STATE 222 def_bool y 223 224config ARCH_SUPPORTS_UPROBES 225 def_bool y 226 227config ARCH_HAS_DMA_SET_COHERENT_MASK 228 bool 229 230config GENERIC_ISA_DMA 231 bool 232 233config FIQ 234 bool 235 236config NEED_RET_TO_USER 237 bool 238 239config ARCH_MTD_XIP 240 bool 241 242config VECTORS_BASE 243 hex 244 default 0xffff0000 if MMU || CPU_HIGH_VECTOR 245 default DRAM_BASE if REMAP_VECTORS_TO_RAM 246 default 0x00000000 247 help 248 The base address of exception vectors. This must be two pages 249 in size. 250 251config ARM_PATCH_PHYS_VIRT 252 bool "Patch physical to virtual translations at runtime" if EMBEDDED 253 default y 254 depends on !XIP_KERNEL && MMU 255 help 256 Patch phys-to-virt and virt-to-phys translation functions at 257 boot and module load time according to the position of the 258 kernel in system memory. 259 260 This can only be used with non-XIP MMU kernels where the base 261 of physical memory is at a 16MB boundary. 262 263 Only disable this option if you know that you do not require 264 this feature (eg, building a kernel for a single machine) and 265 you need to shrink the kernel to the minimal size. 266 267config NEED_MACH_IO_H 268 bool 269 help 270 Select this when mach/io.h is required to provide special 271 definitions for this platform. The need for mach/io.h should 272 be avoided when possible. 273 274config NEED_MACH_MEMORY_H 275 bool 276 help 277 Select this when mach/memory.h is required to provide special 278 definitions for this platform. The need for mach/memory.h should 279 be avoided when possible. 280 281config PHYS_OFFSET 282 hex "Physical address of main memory" if MMU 283 depends on !ARM_PATCH_PHYS_VIRT 284 default DRAM_BASE if !MMU 285 default 0x00000000 if ARCH_EBSA110 || \ 286 ARCH_FOOTBRIDGE || \ 287 ARCH_INTEGRATOR || \ 288 ARCH_IOP13XX || \ 289 ARCH_KS8695 || \ 290 ARCH_REALVIEW 291 default 0x10000000 if ARCH_OMAP1 || ARCH_RPC 292 default 0x20000000 if ARCH_S5PV210 293 default 0xc0000000 if ARCH_SA1100 294 help 295 Please provide the physical address corresponding to the 296 location of main memory in your system. 297 298config GENERIC_BUG 299 def_bool y 300 depends on BUG 301 302config PGTABLE_LEVELS 303 int 304 default 3 if ARM_LPAE 305 default 2 306 307source "init/Kconfig" 308 309source "kernel/Kconfig.freezer" 310 311menu "System Type" 312 313config MMU 314 bool "MMU-based Paged Memory Management Support" 315 default y 316 help 317 Select if you want MMU-based virtualised addressing space 318 support by paged memory management. If unsure, say 'Y'. 319 320config ARCH_MMAP_RND_BITS_MIN 321 default 8 322 323config ARCH_MMAP_RND_BITS_MAX 324 default 14 if PAGE_OFFSET=0x40000000 325 default 15 if PAGE_OFFSET=0x80000000 326 default 16 327 328# 329# The "ARM system type" choice list is ordered alphabetically by option 330# text. Please add new entries in the option alphabetic order. 331# 332choice 333 prompt "ARM system type" 334 default ARM_SINGLE_ARMV7M if !MMU 335 default ARCH_MULTIPLATFORM if MMU 336 337config ARCH_MULTIPLATFORM 338 bool "Allow multiple platforms to be selected" 339 depends on MMU 340 select ARM_HAS_SG_CHAIN 341 select ARM_PATCH_PHYS_VIRT 342 select AUTO_ZRELADDR 343 select TIMER_OF 344 select COMMON_CLK 345 select GENERIC_CLOCKEVENTS 346 select MIGHT_HAVE_PCI 347 select MULTI_IRQ_HANDLER 348 select PCI_DOMAINS if PCI 349 select SPARSE_IRQ 350 select USE_OF 351 352config ARM_SINGLE_ARMV7M 353 bool "ARMv7-M based platforms (Cortex-M0/M3/M4)" 354 depends on !MMU 355 select ARM_NVIC 356 select AUTO_ZRELADDR 357 select TIMER_OF 358 select COMMON_CLK 359 select CPU_V7M 360 select GENERIC_CLOCKEVENTS 361 select NO_IOPORT_MAP 362 select SPARSE_IRQ 363 select USE_OF 364 365config ARCH_EBSA110 366 bool "EBSA-110" 367 select ARCH_USES_GETTIMEOFFSET 368 select CPU_SA110 369 select ISA 370 select NEED_MACH_IO_H 371 select NEED_MACH_MEMORY_H 372 select NO_IOPORT_MAP 373 help 374 This is an evaluation board for the StrongARM processor available 375 from Digital. It has limited hardware on-board, including an 376 Ethernet interface, two PCMCIA sockets, two serial ports and a 377 parallel port. 378 379config ARCH_EP93XX 380 bool "EP93xx-based" 381 select ARCH_HAS_HOLES_MEMORYMODEL 382 select ARM_AMBA 383 select ARM_PATCH_PHYS_VIRT 384 select ARM_VIC 385 select AUTO_ZRELADDR 386 select CLKDEV_LOOKUP 387 select CLKSRC_MMIO 388 select CPU_ARM920T 389 select GENERIC_CLOCKEVENTS 390 select GPIOLIB 391 help 392 This enables support for the Cirrus EP93xx series of CPUs. 393 394config ARCH_FOOTBRIDGE 395 bool "FootBridge" 396 select CPU_SA110 397 select FOOTBRIDGE 398 select GENERIC_CLOCKEVENTS 399 select HAVE_IDE 400 select NEED_MACH_IO_H if !MMU 401 select NEED_MACH_MEMORY_H 402 help 403 Support for systems based on the DC21285 companion chip 404 ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. 405 406config ARCH_NETX 407 bool "Hilscher NetX based" 408 select ARM_VIC 409 select CLKSRC_MMIO 410 select CPU_ARM926T 411 select GENERIC_CLOCKEVENTS 412 help 413 This enables support for systems based on the Hilscher NetX Soc 414 415config ARCH_IOP13XX 416 bool "IOP13xx-based" 417 depends on MMU 418 select CPU_XSC3 419 select NEED_MACH_MEMORY_H 420 select NEED_RET_TO_USER 421 select PCI 422 select PLAT_IOP 423 select VMSPLIT_1G 424 select SPARSE_IRQ 425 help 426 Support for Intel's IOP13XX (XScale) family of processors. 427 428config ARCH_IOP32X 429 bool "IOP32x-based" 430 depends on MMU 431 select CPU_XSCALE 432 select GPIO_IOP 433 select GPIOLIB 434 select NEED_RET_TO_USER 435 select PCI 436 select PLAT_IOP 437 help 438 Support for Intel's 80219 and IOP32X (XScale) family of 439 processors. 440 441config ARCH_IOP33X 442 bool "IOP33x-based" 443 depends on MMU 444 select CPU_XSCALE 445 select GPIO_IOP 446 select GPIOLIB 447 select NEED_RET_TO_USER 448 select PCI 449 select PLAT_IOP 450 help 451 Support for Intel's IOP33X (XScale) family of processors. 452 453config ARCH_IXP4XX 454 bool "IXP4xx-based" 455 depends on MMU 456 select ARCH_HAS_DMA_SET_COHERENT_MASK 457 select ARCH_SUPPORTS_BIG_ENDIAN 458 select CLKSRC_MMIO 459 select CPU_XSCALE 460 select DMABOUNCE if PCI 461 select GENERIC_CLOCKEVENTS 462 select GPIOLIB 463 select MIGHT_HAVE_PCI 464 select NEED_MACH_IO_H 465 select USB_EHCI_BIG_ENDIAN_DESC 466 select USB_EHCI_BIG_ENDIAN_MMIO 467 help 468 Support for Intel's IXP4XX (XScale) family of processors. 469 470config ARCH_DOVE 471 bool "Marvell Dove" 472 select CPU_PJ4 473 select GENERIC_CLOCKEVENTS 474 select GPIOLIB 475 select MIGHT_HAVE_PCI 476 select MULTI_IRQ_HANDLER 477 select MVEBU_MBUS 478 select PINCTRL 479 select PINCTRL_DOVE 480 select PLAT_ORION_LEGACY 481 select SPARSE_IRQ 482 select PM_GENERIC_DOMAINS if PM 483 help 484 Support for the Marvell Dove SoC 88AP510 485 486config ARCH_KS8695 487 bool "Micrel/Kendin KS8695" 488 select CLKSRC_MMIO 489 select CPU_ARM922T 490 select GENERIC_CLOCKEVENTS 491 select GPIOLIB 492 select NEED_MACH_MEMORY_H 493 help 494 Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based 495 System-on-Chip devices. 496 497config ARCH_W90X900 498 bool "Nuvoton W90X900 CPU" 499 select CLKDEV_LOOKUP 500 select CLKSRC_MMIO 501 select CPU_ARM926T 502 select GENERIC_CLOCKEVENTS 503 select GPIOLIB 504 help 505 Support for Nuvoton (Winbond logic dept.) ARM9 processor, 506 At present, the w90x900 has been renamed nuc900, regarding 507 the ARM series product line, you can login the following 508 link address to know more. 509 510 <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/ 511 ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller> 512 513config ARCH_LPC32XX 514 bool "NXP LPC32XX" 515 select ARM_AMBA 516 select CLKDEV_LOOKUP 517 select CLKSRC_LPC32XX 518 select COMMON_CLK 519 select CPU_ARM926T 520 select GENERIC_CLOCKEVENTS 521 select GPIOLIB 522 select MULTI_IRQ_HANDLER 523 select SPARSE_IRQ 524 select USE_OF 525 help 526 Support for the NXP LPC32XX family of processors 527 528config ARCH_PXA 529 bool "PXA2xx/PXA3xx-based" 530 depends on MMU 531 select ARCH_MTD_XIP 532 select ARM_CPU_SUSPEND if PM 533 select AUTO_ZRELADDR 534 select COMMON_CLK 535 select CLKDEV_LOOKUP 536 select CLKSRC_PXA 537 select CLKSRC_MMIO 538 select TIMER_OF 539 select CPU_XSCALE if !CPU_XSC3 540 select GENERIC_CLOCKEVENTS 541 select GPIO_PXA 542 select GPIOLIB 543 select HAVE_IDE 544 select IRQ_DOMAIN 545 select MULTI_IRQ_HANDLER 546 select PLAT_PXA 547 select SPARSE_IRQ 548 help 549 Support for Intel/Marvell's PXA2xx/PXA3xx processor line. 550 551config ARCH_RPC 552 bool "RiscPC" 553 depends on MMU 554 select ARCH_ACORN 555 select ARCH_MAY_HAVE_PC_FDC 556 select ARCH_SPARSEMEM_ENABLE 557 select ARCH_USES_GETTIMEOFFSET 558 select CPU_SA110 559 select FIQ 560 select HAVE_IDE 561 select HAVE_PATA_PLATFORM 562 select ISA_DMA_API 563 select NEED_MACH_IO_H 564 select NEED_MACH_MEMORY_H 565 select NO_IOPORT_MAP 566 help 567 On the Acorn Risc-PC, Linux can support the internal IDE disk and 568 CD-ROM interface, serial and parallel port, and the floppy drive. 569 570config ARCH_SA1100 571 bool "SA1100-based" 572 select ARCH_MTD_XIP 573 select ARCH_SPARSEMEM_ENABLE 574 select CLKDEV_LOOKUP 575 select CLKSRC_MMIO 576 select CLKSRC_PXA 577 select TIMER_OF if OF 578 select CPU_FREQ 579 select CPU_SA1100 580 select GENERIC_CLOCKEVENTS 581 select GPIOLIB 582 select HAVE_IDE 583 select IRQ_DOMAIN 584 select ISA 585 select MULTI_IRQ_HANDLER 586 select NEED_MACH_MEMORY_H 587 select SPARSE_IRQ 588 help 589 Support for StrongARM 11x0 based boards. 590 591config ARCH_S3C24XX 592 bool "Samsung S3C24XX SoCs" 593 select ATAGS 594 select CLKDEV_LOOKUP 595 select CLKSRC_SAMSUNG_PWM 596 select GENERIC_CLOCKEVENTS 597 select GPIO_SAMSUNG 598 select GPIOLIB 599 select HAVE_S3C2410_I2C if I2C 600 select HAVE_S3C2410_WATCHDOG if WATCHDOG 601 select HAVE_S3C_RTC if RTC_CLASS 602 select MULTI_IRQ_HANDLER 603 select NEED_MACH_IO_H 604 select SAMSUNG_ATAGS 605 help 606 Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 607 and S3C2450 SoCs based systems, such as the Simtec Electronics BAST 608 (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the 609 Samsung SMDK2410 development board (and derivatives). 610 611config ARCH_DAVINCI 612 bool "TI DaVinci" 613 select ARCH_HAS_HOLES_MEMORYMODEL 614 select CLKDEV_LOOKUP 615 select CPU_ARM926T 616 select GENERIC_ALLOCATOR 617 select GENERIC_CLOCKEVENTS 618 select GENERIC_IRQ_CHIP 619 select GPIOLIB 620 select HAVE_IDE 621 select USE_OF 622 select ZONE_DMA 623 help 624 Support for TI's DaVinci platform. 625 626config ARCH_OMAP1 627 bool "TI OMAP1" 628 depends on MMU 629 select ARCH_HAS_HOLES_MEMORYMODEL 630 select ARCH_OMAP 631 select CLKDEV_LOOKUP 632 select CLKSRC_MMIO 633 select GENERIC_CLOCKEVENTS 634 select GENERIC_IRQ_CHIP 635 select GPIOLIB 636 select HAVE_IDE 637 select IRQ_DOMAIN 638 select MULTI_IRQ_HANDLER 639 select NEED_MACH_IO_H if PCCARD 640 select NEED_MACH_MEMORY_H 641 select SPARSE_IRQ 642 help 643 Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx) 644 645endchoice 646 647menu "Multiple platform selection" 648 depends on ARCH_MULTIPLATFORM 649 650comment "CPU Core family selection" 651 652config ARCH_MULTI_V4 653 bool "ARMv4 based platforms (FA526)" 654 depends on !ARCH_MULTI_V6_V7 655 select ARCH_MULTI_V4_V5 656 select CPU_FA526 657 658config ARCH_MULTI_V4T 659 bool "ARMv4T based platforms (ARM720T, ARM920T, ...)" 660 depends on !ARCH_MULTI_V6_V7 661 select ARCH_MULTI_V4_V5 662 select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \ 663 CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \ 664 CPU_ARM925T || CPU_ARM940T) 665 666config ARCH_MULTI_V5 667 bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)" 668 depends on !ARCH_MULTI_V6_V7 669 select ARCH_MULTI_V4_V5 670 select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \ 671 CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \ 672 CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON) 673 674config ARCH_MULTI_V4_V5 675 bool 676 677config ARCH_MULTI_V6 678 bool "ARMv6 based platforms (ARM11)" 679 select ARCH_MULTI_V6_V7 680 select CPU_V6K 681 682config ARCH_MULTI_V7 683 bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)" 684 default y 685 select ARCH_MULTI_V6_V7 686 select CPU_V7 687 select HAVE_SMP 688 689config ARCH_MULTI_V6_V7 690 bool 691 select MIGHT_HAVE_CACHE_L2X0 692 693config ARCH_MULTI_CPU_AUTO 694 def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7) 695 select ARCH_MULTI_V5 696 697endmenu 698 699config ARCH_VIRT 700 bool "Dummy Virtual Machine" 701 depends on ARCH_MULTI_V7 702 select ARM_AMBA 703 select ARM_GIC 704 select ARM_GIC_V2M if PCI 705 select ARM_GIC_V3 706 select ARM_GIC_V3_ITS if PCI 707 select ARM_PSCI 708 select HAVE_ARM_ARCH_TIMER 709 710# 711# This is sorted alphabetically by mach-* pathname. However, plat-* 712# Kconfigs may be included either alphabetically (according to the 713# plat- suffix) or along side the corresponding mach-* source. 714# 715source "arch/arm/mach-mvebu/Kconfig" 716 717source "arch/arm/mach-actions/Kconfig" 718 719source "arch/arm/mach-alpine/Kconfig" 720 721source "arch/arm/mach-artpec/Kconfig" 722 723source "arch/arm/mach-asm9260/Kconfig" 724 725source "arch/arm/mach-at91/Kconfig" 726 727source "arch/arm/mach-axxia/Kconfig" 728 729source "arch/arm/mach-bcm/Kconfig" 730 731source "arch/arm/mach-berlin/Kconfig" 732 733source "arch/arm/mach-clps711x/Kconfig" 734 735source "arch/arm/mach-cns3xxx/Kconfig" 736 737source "arch/arm/mach-davinci/Kconfig" 738 739source "arch/arm/mach-digicolor/Kconfig" 740 741source "arch/arm/mach-dove/Kconfig" 742 743source "arch/arm/mach-ep93xx/Kconfig" 744 745source "arch/arm/mach-footbridge/Kconfig" 746 747source "arch/arm/mach-gemini/Kconfig" 748 749source "arch/arm/mach-highbank/Kconfig" 750 751source "arch/arm/mach-hisi/Kconfig" 752 753source "arch/arm/mach-integrator/Kconfig" 754 755source "arch/arm/mach-iop32x/Kconfig" 756 757source "arch/arm/mach-iop33x/Kconfig" 758 759source "arch/arm/mach-iop13xx/Kconfig" 760 761source "arch/arm/mach-ixp4xx/Kconfig" 762 763source "arch/arm/mach-keystone/Kconfig" 764 765source "arch/arm/mach-ks8695/Kconfig" 766 767source "arch/arm/mach-meson/Kconfig" 768 769source "arch/arm/mach-moxart/Kconfig" 770 771source "arch/arm/mach-aspeed/Kconfig" 772 773source "arch/arm/mach-mv78xx0/Kconfig" 774 775source "arch/arm/mach-imx/Kconfig" 776 777source "arch/arm/mach-mediatek/Kconfig" 778 779source "arch/arm/mach-mxs/Kconfig" 780 781source "arch/arm/mach-netx/Kconfig" 782 783source "arch/arm/mach-nomadik/Kconfig" 784 785source "arch/arm/mach-nspire/Kconfig" 786 787source "arch/arm/plat-omap/Kconfig" 788 789source "arch/arm/mach-omap1/Kconfig" 790 791source "arch/arm/mach-omap2/Kconfig" 792 793source "arch/arm/mach-orion5x/Kconfig" 794 795source "arch/arm/mach-picoxcell/Kconfig" 796 797source "arch/arm/mach-pxa/Kconfig" 798source "arch/arm/plat-pxa/Kconfig" 799 800source "arch/arm/mach-mmp/Kconfig" 801 802source "arch/arm/mach-oxnas/Kconfig" 803 804source "arch/arm/mach-qcom/Kconfig" 805 806source "arch/arm/mach-realview/Kconfig" 807 808source "arch/arm/mach-rockchip/Kconfig" 809 810source "arch/arm/mach-sa1100/Kconfig" 811 812source "arch/arm/mach-socfpga/Kconfig" 813 814source "arch/arm/mach-spear/Kconfig" 815 816source "arch/arm/mach-sti/Kconfig" 817 818source "arch/arm/mach-stm32/Kconfig" 819 820source "arch/arm/mach-s3c24xx/Kconfig" 821 822source "arch/arm/mach-s3c64xx/Kconfig" 823 824source "arch/arm/mach-s5pv210/Kconfig" 825 826source "arch/arm/mach-exynos/Kconfig" 827source "arch/arm/plat-samsung/Kconfig" 828 829source "arch/arm/mach-shmobile/Kconfig" 830 831source "arch/arm/mach-sunxi/Kconfig" 832 833source "arch/arm/mach-prima2/Kconfig" 834 835source "arch/arm/mach-tango/Kconfig" 836 837source "arch/arm/mach-tegra/Kconfig" 838 839source "arch/arm/mach-u300/Kconfig" 840 841source "arch/arm/mach-uniphier/Kconfig" 842 843source "arch/arm/mach-ux500/Kconfig" 844 845source "arch/arm/mach-versatile/Kconfig" 846 847source "arch/arm/mach-vexpress/Kconfig" 848source "arch/arm/plat-versatile/Kconfig" 849 850source "arch/arm/mach-vt8500/Kconfig" 851 852source "arch/arm/mach-w90x900/Kconfig" 853 854source "arch/arm/mach-zx/Kconfig" 855 856source "arch/arm/mach-zynq/Kconfig" 857 858# ARMv7-M architecture 859config ARCH_EFM32 860 bool "Energy Micro efm32" 861 depends on ARM_SINGLE_ARMV7M 862 select GPIOLIB 863 help 864 Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko 865 processors. 866 867config ARCH_LPC18XX 868 bool "NXP LPC18xx/LPC43xx" 869 depends on ARM_SINGLE_ARMV7M 870 select ARCH_HAS_RESET_CONTROLLER 871 select ARM_AMBA 872 select CLKSRC_LPC32XX 873 select PINCTRL 874 help 875 Support for NXP's LPC18xx Cortex-M3 and LPC43xx Cortex-M4 876 high performance microcontrollers. 877 878config ARCH_MPS2 879 bool "ARM MPS2 platform" 880 depends on ARM_SINGLE_ARMV7M 881 select ARM_AMBA 882 select CLKSRC_MPS2 883 help 884 Support for Cortex-M Prototyping System (or V2M-MPS2) which comes 885 with a range of available cores like Cortex-M3/M4/M7. 886 887 Please, note that depends which Application Note is used memory map 888 for the platform may vary, so adjustment of RAM base might be needed. 889 890# Definitions to make life easier 891config ARCH_ACORN 892 bool 893 894config PLAT_IOP 895 bool 896 select GENERIC_CLOCKEVENTS 897 898config PLAT_ORION 899 bool 900 select CLKSRC_MMIO 901 select COMMON_CLK 902 select GENERIC_IRQ_CHIP 903 select IRQ_DOMAIN 904 905config PLAT_ORION_LEGACY 906 bool 907 select PLAT_ORION 908 909config PLAT_PXA 910 bool 911 912config PLAT_VERSATILE 913 bool 914 915source "arch/arm/firmware/Kconfig" 916 917source arch/arm/mm/Kconfig 918 919config IWMMXT 920 bool "Enable iWMMXt support" 921 depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 || CPU_PJ4B 922 default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 || CPU_PJ4B 923 help 924 Enable support for iWMMXt context switching at run time if 925 running on a CPU that supports it. 926 927config MULTI_IRQ_HANDLER 928 bool 929 help 930 Allow each machine to specify it's own IRQ handler at run time. 931 932if !MMU 933source "arch/arm/Kconfig-nommu" 934endif 935 936config PJ4B_ERRATA_4742 937 bool "PJ4B Errata 4742: IDLE Wake Up Commands can Cause the CPU Core to Cease Operation" 938 depends on CPU_PJ4B && MACH_ARMADA_370 939 default y 940 help 941 When coming out of either a Wait for Interrupt (WFI) or a Wait for 942 Event (WFE) IDLE states, a specific timing sensitivity exists between 943 the retiring WFI/WFE instructions and the newly issued subsequent 944 instructions. This sensitivity can result in a CPU hang scenario. 945 Workaround: 946 The software must insert either a Data Synchronization Barrier (DSB) 947 or Data Memory Barrier (DMB) command immediately after the WFI/WFE 948 instruction 949 950config ARM_ERRATA_326103 951 bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory" 952 depends on CPU_V6 953 help 954 Executing a SWP instruction to read-only memory does not set bit 11 955 of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to 956 treat the access as a read, preventing a COW from occurring and 957 causing the faulting task to livelock. 958 959config ARM_ERRATA_411920 960 bool "ARM errata: Invalidation of the Instruction Cache operation can fail" 961 depends on CPU_V6 || CPU_V6K 962 help 963 Invalidation of the Instruction Cache operation can 964 fail. This erratum is present in 1136 (before r1p4), 1156 and 1176. 965 It does not affect the MPCore. This option enables the ARM Ltd. 966 recommended workaround. 967 968config ARM_ERRATA_430973 969 bool "ARM errata: Stale prediction on replaced interworking branch" 970 depends on CPU_V7 971 help 972 This option enables the workaround for the 430973 Cortex-A8 973 r1p* erratum. If a code sequence containing an ARM/Thumb 974 interworking branch is replaced with another code sequence at the 975 same virtual address, whether due to self-modifying code or virtual 976 to physical address re-mapping, Cortex-A8 does not recover from the 977 stale interworking branch prediction. This results in Cortex-A8 978 executing the new code sequence in the incorrect ARM or Thumb state. 979 The workaround enables the BTB/BTAC operations by setting ACTLR.IBE 980 and also flushes the branch target cache at every context switch. 981 Note that setting specific bits in the ACTLR register may not be 982 available in non-secure mode. 983 984config ARM_ERRATA_458693 985 bool "ARM errata: Processor deadlock when a false hazard is created" 986 depends on CPU_V7 987 depends on !ARCH_MULTIPLATFORM 988 help 989 This option enables the workaround for the 458693 Cortex-A8 (r2p0) 990 erratum. For very specific sequences of memory operations, it is 991 possible for a hazard condition intended for a cache line to instead 992 be incorrectly associated with a different cache line. This false 993 hazard might then cause a processor deadlock. The workaround enables 994 the L1 caching of the NEON accesses and disables the PLD instruction 995 in the ACTLR register. Note that setting specific bits in the ACTLR 996 register may not be available in non-secure mode. 997 998config ARM_ERRATA_460075 999 bool "ARM errata: Data written to the L2 cache can be overwritten with stale data" 1000 depends on CPU_V7 1001 depends on !ARCH_MULTIPLATFORM 1002 help 1003 This option enables the workaround for the 460075 Cortex-A8 (r2p0) 1004 erratum. Any asynchronous access to the L2 cache may encounter a 1005 situation in which recent store transactions to the L2 cache are lost 1006 and overwritten with stale memory contents from external memory. The 1007 workaround disables the write-allocate mode for the L2 cache via the 1008 ACTLR register. Note that setting specific bits in the ACTLR register 1009 may not be available in non-secure mode. 1010 1011config ARM_ERRATA_742230 1012 bool "ARM errata: DMB operation may be faulty" 1013 depends on CPU_V7 && SMP 1014 depends on !ARCH_MULTIPLATFORM 1015 help 1016 This option enables the workaround for the 742230 Cortex-A9 1017 (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction 1018 between two write operations may not ensure the correct visibility 1019 ordering of the two writes. This workaround sets a specific bit in 1020 the diagnostic register of the Cortex-A9 which causes the DMB 1021 instruction to behave as a DSB, ensuring the correct behaviour of 1022 the two writes. 1023 1024config ARM_ERRATA_742231 1025 bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption" 1026 depends on CPU_V7 && SMP 1027 depends on !ARCH_MULTIPLATFORM 1028 help 1029 This option enables the workaround for the 742231 Cortex-A9 1030 (r2p0..r2p2) erratum. Under certain conditions, specific to the 1031 Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode, 1032 accessing some data located in the same cache line, may get corrupted 1033 data due to bad handling of the address hazard when the line gets 1034 replaced from one of the CPUs at the same time as another CPU is 1035 accessing it. This workaround sets specific bits in the diagnostic 1036 register of the Cortex-A9 which reduces the linefill issuing 1037 capabilities of the processor. 1038 1039config ARM_ERRATA_643719 1040 bool "ARM errata: LoUIS bit field in CLIDR register is incorrect" 1041 depends on CPU_V7 && SMP 1042 default y 1043 help 1044 This option enables the workaround for the 643719 Cortex-A9 (prior to 1045 r1p0) erratum. On affected cores the LoUIS bit field of the CLIDR 1046 register returns zero when it should return one. The workaround 1047 corrects this value, ensuring cache maintenance operations which use 1048 it behave as intended and avoiding data corruption. 1049 1050config ARM_ERRATA_720789 1051 bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID" 1052 depends on CPU_V7 1053 help 1054 This option enables the workaround for the 720789 Cortex-A9 (prior to 1055 r2p0) erratum. A faulty ASID can be sent to the other CPUs for the 1056 broadcasted CP15 TLB maintenance operations TLBIASIDIS and TLBIMVAIS. 1057 As a consequence of this erratum, some TLB entries which should be 1058 invalidated are not, resulting in an incoherency in the system page 1059 tables. The workaround changes the TLB flushing routines to invalidate 1060 entries regardless of the ASID. 1061 1062config ARM_ERRATA_743622 1063 bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption" 1064 depends on CPU_V7 1065 depends on !ARCH_MULTIPLATFORM 1066 help 1067 This option enables the workaround for the 743622 Cortex-A9 1068 (r2p*) erratum. Under very rare conditions, a faulty 1069 optimisation in the Cortex-A9 Store Buffer may lead to data 1070 corruption. This workaround sets a specific bit in the diagnostic 1071 register of the Cortex-A9 which disables the Store Buffer 1072 optimisation, preventing the defect from occurring. This has no 1073 visible impact on the overall performance or power consumption of the 1074 processor. 1075 1076config ARM_ERRATA_751472 1077 bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation" 1078 depends on CPU_V7 1079 depends on !ARCH_MULTIPLATFORM 1080 help 1081 This option enables the workaround for the 751472 Cortex-A9 (prior 1082 to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the 1083 completion of a following broadcasted operation if the second 1084 operation is received by a CPU before the ICIALLUIS has completed, 1085 potentially leading to corrupted entries in the cache or TLB. 1086 1087config ARM_ERRATA_754322 1088 bool "ARM errata: possible faulty MMU translations following an ASID switch" 1089 depends on CPU_V7 1090 help 1091 This option enables the workaround for the 754322 Cortex-A9 (r2p*, 1092 r3p*) erratum. A speculative memory access may cause a page table walk 1093 which starts prior to an ASID switch but completes afterwards. This 1094 can populate the micro-TLB with a stale entry which may be hit with 1095 the new ASID. This workaround places two dsb instructions in the mm 1096 switching code so that no page table walks can cross the ASID switch. 1097 1098config ARM_ERRATA_754327 1099 bool "ARM errata: no automatic Store Buffer drain" 1100 depends on CPU_V7 && SMP 1101 help 1102 This option enables the workaround for the 754327 Cortex-A9 (prior to 1103 r2p0) erratum. The Store Buffer does not have any automatic draining 1104 mechanism and therefore a livelock may occur if an external agent 1105 continuously polls a memory location waiting to observe an update. 1106 This workaround defines cpu_relax() as smp_mb(), preventing correctly 1107 written polling loops from denying visibility of updates to memory. 1108 1109config ARM_ERRATA_364296 1110 bool "ARM errata: Possible cache data corruption with hit-under-miss enabled" 1111 depends on CPU_V6 1112 help 1113 This options enables the workaround for the 364296 ARM1136 1114 r0p2 erratum (possible cache data corruption with 1115 hit-under-miss enabled). It sets the undocumented bit 31 in 1116 the auxiliary control register and the FI bit in the control 1117 register, thus disabling hit-under-miss without putting the 1118 processor into full low interrupt latency mode. ARM11MPCore 1119 is not affected. 1120 1121config ARM_ERRATA_764369 1122 bool "ARM errata: Data cache line maintenance operation by MVA may not succeed" 1123 depends on CPU_V7 && SMP 1124 help 1125 This option enables the workaround for erratum 764369 1126 affecting Cortex-A9 MPCore with two or more processors (all 1127 current revisions). Under certain timing circumstances, a data 1128 cache line maintenance operation by MVA targeting an Inner 1129 Shareable memory region may fail to proceed up to either the 1130 Point of Coherency or to the Point of Unification of the 1131 system. This workaround adds a DSB instruction before the 1132 relevant cache maintenance functions and sets a specific bit 1133 in the diagnostic control register of the SCU. 1134 1135config ARM_ERRATA_775420 1136 bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock" 1137 depends on CPU_V7 1138 help 1139 This option enables the workaround for the 775420 Cortex-A9 (r2p2, 1140 r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance 1141 operation aborts with MMU exception, it might cause the processor 1142 to deadlock. This workaround puts DSB before executing ISB if 1143 an abort may occur on cache maintenance. 1144 1145config ARM_ERRATA_798181 1146 bool "ARM errata: TLBI/DSB failure on Cortex-A15" 1147 depends on CPU_V7 && SMP 1148 help 1149 On Cortex-A15 (r0p0..r3p2) the TLBI*IS/DSB operations are not 1150 adequately shooting down all use of the old entries. This 1151 option enables the Linux kernel workaround for this erratum 1152 which sends an IPI to the CPUs that are running the same ASID 1153 as the one being invalidated. 1154 1155config ARM_ERRATA_773022 1156 bool "ARM errata: incorrect instructions may be executed from loop buffer" 1157 depends on CPU_V7 1158 help 1159 This option enables the workaround for the 773022 Cortex-A15 1160 (up to r0p4) erratum. In certain rare sequences of code, the 1161 loop buffer may deliver incorrect instructions. This 1162 workaround disables the loop buffer to avoid the erratum. 1163 1164config ARM_ERRATA_818325_852422 1165 bool "ARM errata: A12: some seqs of opposed cond code instrs => deadlock or corruption" 1166 depends on CPU_V7 1167 help 1168 This option enables the workaround for: 1169 - Cortex-A12 818325: Execution of an UNPREDICTABLE STR or STM 1170 instruction might deadlock. Fixed in r0p1. 1171 - Cortex-A12 852422: Execution of a sequence of instructions might 1172 lead to either a data corruption or a CPU deadlock. Not fixed in 1173 any Cortex-A12 cores yet. 1174 This workaround for all both errata involves setting bit[12] of the 1175 Feature Register. This bit disables an optimisation applied to a 1176 sequence of 2 instructions that use opposing condition codes. 1177 1178config ARM_ERRATA_821420 1179 bool "ARM errata: A12: sequence of VMOV to core registers might lead to a dead lock" 1180 depends on CPU_V7 1181 help 1182 This option enables the workaround for the 821420 Cortex-A12 1183 (all revs) erratum. In very rare timing conditions, a sequence 1184 of VMOV to Core registers instructions, for which the second 1185 one is in the shadow of a branch or abort, can lead to a 1186 deadlock when the VMOV instructions are issued out-of-order. 1187 1188config ARM_ERRATA_825619 1189 bool "ARM errata: A12: DMB NSHST/ISHST mixed ... might cause deadlock" 1190 depends on CPU_V7 1191 help 1192 This option enables the workaround for the 825619 Cortex-A12 1193 (all revs) erratum. Within rare timing constraints, executing a 1194 DMB NSHST or DMB ISHST instruction followed by a mix of Cacheable 1195 and Device/Strongly-Ordered loads and stores might cause deadlock 1196 1197config ARM_ERRATA_852421 1198 bool "ARM errata: A17: DMB ST might fail to create order between stores" 1199 depends on CPU_V7 1200 help 1201 This option enables the workaround for the 852421 Cortex-A17 1202 (r1p0, r1p1, r1p2) erratum. Under very rare timing conditions, 1203 execution of a DMB ST instruction might fail to properly order 1204 stores from GroupA and stores from GroupB. 1205 1206config ARM_ERRATA_852423 1207 bool "ARM errata: A17: some seqs of opposed cond code instrs => deadlock or corruption" 1208 depends on CPU_V7 1209 help 1210 This option enables the workaround for: 1211 - Cortex-A17 852423: Execution of a sequence of instructions might 1212 lead to either a data corruption or a CPU deadlock. Not fixed in 1213 any Cortex-A17 cores yet. 1214 This is identical to Cortex-A12 erratum 852422. It is a separate 1215 config option from the A12 erratum due to the way errata are checked 1216 for and handled. 1217 1218endmenu 1219 1220source "arch/arm/common/Kconfig" 1221 1222menu "Bus support" 1223 1224config ISA 1225 bool 1226 help 1227 Find out whether you have ISA slots on your motherboard. ISA is the 1228 name of a bus system, i.e. the way the CPU talks to the other stuff 1229 inside your box. Other bus systems are PCI, EISA, MicroChannel 1230 (MCA) or VESA. ISA is an older system, now being displaced by PCI; 1231 newer boards don't support it. If you have ISA, say Y, otherwise N. 1232 1233# Select ISA DMA controller support 1234config ISA_DMA 1235 bool 1236 select ISA_DMA_API 1237 1238# Select ISA DMA interface 1239config ISA_DMA_API 1240 bool 1241 1242config PCI 1243 bool "PCI support" if MIGHT_HAVE_PCI 1244 help 1245 Find out whether you have a PCI motherboard. PCI is the name of a 1246 bus system, i.e. the way the CPU talks to the other stuff inside 1247 your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or 1248 VESA. If you have PCI, say Y, otherwise N. 1249 1250config PCI_DOMAINS 1251 bool 1252 depends on PCI 1253 1254config PCI_DOMAINS_GENERIC 1255 def_bool PCI_DOMAINS 1256 1257config PCI_NANOENGINE 1258 bool "BSE nanoEngine PCI support" 1259 depends on SA1100_NANOENGINE 1260 help 1261 Enable PCI on the BSE nanoEngine board. 1262 1263config PCI_SYSCALL 1264 def_bool PCI 1265 1266config PCI_HOST_ITE8152 1267 bool 1268 depends on PCI && MACH_ARMCORE 1269 default y 1270 select DMABOUNCE 1271 1272source "drivers/pci/Kconfig" 1273 1274source "drivers/pcmcia/Kconfig" 1275 1276endmenu 1277 1278menu "Kernel Features" 1279 1280config HAVE_SMP 1281 bool 1282 help 1283 This option should be selected by machines which have an SMP- 1284 capable CPU. 1285 1286 The only effect of this option is to make the SMP-related 1287 options available to the user for configuration. 1288 1289config SMP 1290 bool "Symmetric Multi-Processing" 1291 depends on CPU_V6K || CPU_V7 1292 depends on GENERIC_CLOCKEVENTS 1293 depends on HAVE_SMP 1294 depends on MMU || ARM_MPU 1295 select IRQ_WORK 1296 help 1297 This enables support for systems with more than one CPU. If you have 1298 a system with only one CPU, say N. If you have a system with more 1299 than one CPU, say Y. 1300 1301 If you say N here, the kernel will run on uni- and multiprocessor 1302 machines, but will use only one CPU of a multiprocessor machine. If 1303 you say Y here, the kernel will run on many, but not all, 1304 uniprocessor machines. On a uniprocessor machine, the kernel 1305 will run faster if you say N here. 1306 1307 See also <file:Documentation/x86/i386/IO-APIC.txt>, 1308 <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at 1309 <http://tldp.org/HOWTO/SMP-HOWTO.html>. 1310 1311 If you don't know what to do here, say N. 1312 1313config SMP_ON_UP 1314 bool "Allow booting SMP kernel on uniprocessor systems" 1315 depends on SMP && !XIP_KERNEL && MMU 1316 default y 1317 help 1318 SMP kernels contain instructions which fail on non-SMP processors. 1319 Enabling this option allows the kernel to modify itself to make 1320 these instructions safe. Disabling it allows about 1K of space 1321 savings. 1322 1323 If you don't know what to do here, say Y. 1324 1325config ARM_CPU_TOPOLOGY 1326 bool "Support cpu topology definition" 1327 depends on SMP && CPU_V7 1328 default y 1329 help 1330 Support ARM cpu topology definition. The MPIDR register defines 1331 affinity between processors which is then used to describe the cpu 1332 topology of an ARM System. 1333 1334config SCHED_MC 1335 bool "Multi-core scheduler support" 1336 depends on ARM_CPU_TOPOLOGY 1337 help 1338 Multi-core scheduler support improves the CPU scheduler's decision 1339 making when dealing with multi-core CPU chips at a cost of slightly 1340 increased overhead in some places. If unsure say N here. 1341 1342config SCHED_SMT 1343 bool "SMT scheduler support" 1344 depends on ARM_CPU_TOPOLOGY 1345 help 1346 Improves the CPU scheduler's decision making when dealing with 1347 MultiThreading at a cost of slightly increased overhead in some 1348 places. If unsure say N here. 1349 1350config HAVE_ARM_SCU 1351 bool 1352 help 1353 This option enables support for the ARM system coherency unit 1354 1355config HAVE_ARM_ARCH_TIMER 1356 bool "Architected timer support" 1357 depends on CPU_V7 1358 select ARM_ARCH_TIMER 1359 select GENERIC_CLOCKEVENTS 1360 help 1361 This option enables support for the ARM architected timer 1362 1363config HAVE_ARM_TWD 1364 bool 1365 select TIMER_OF if OF 1366 help 1367 This options enables support for the ARM timer and watchdog unit 1368 1369config MCPM 1370 bool "Multi-Cluster Power Management" 1371 depends on CPU_V7 && SMP 1372 help 1373 This option provides the common power management infrastructure 1374 for (multi-)cluster based systems, such as big.LITTLE based 1375 systems. 1376 1377config MCPM_QUAD_CLUSTER 1378 bool 1379 depends on MCPM 1380 help 1381 To avoid wasting resources unnecessarily, MCPM only supports up 1382 to 2 clusters by default. 1383 Platforms with 3 or 4 clusters that use MCPM must select this 1384 option to allow the additional clusters to be managed. 1385 1386config BIG_LITTLE 1387 bool "big.LITTLE support (Experimental)" 1388 depends on CPU_V7 && SMP 1389 select MCPM 1390 help 1391 This option enables support selections for the big.LITTLE 1392 system architecture. 1393 1394config BL_SWITCHER 1395 bool "big.LITTLE switcher support" 1396 depends on BIG_LITTLE && MCPM && HOTPLUG_CPU && ARM_GIC 1397 select CPU_PM 1398 help 1399 The big.LITTLE "switcher" provides the core functionality to 1400 transparently handle transition between a cluster of A15's 1401 and a cluster of A7's in a big.LITTLE system. 1402 1403config BL_SWITCHER_DUMMY_IF 1404 tristate "Simple big.LITTLE switcher user interface" 1405 depends on BL_SWITCHER && DEBUG_KERNEL 1406 help 1407 This is a simple and dummy char dev interface to control 1408 the big.LITTLE switcher core code. It is meant for 1409 debugging purposes only. 1410 1411choice 1412 prompt "Memory split" 1413 depends on MMU 1414 default VMSPLIT_3G 1415 help 1416 Select the desired split between kernel and user memory. 1417 1418 If you are not absolutely sure what you are doing, leave this 1419 option alone! 1420 1421 config VMSPLIT_3G 1422 bool "3G/1G user/kernel split" 1423 config VMSPLIT_3G_OPT 1424 depends on !ARM_LPAE 1425 bool "3G/1G user/kernel split (for full 1G low memory)" 1426 config VMSPLIT_2G 1427 bool "2G/2G user/kernel split" 1428 config VMSPLIT_1G 1429 bool "1G/3G user/kernel split" 1430endchoice 1431 1432config PAGE_OFFSET 1433 hex 1434 default PHYS_OFFSET if !MMU 1435 default 0x40000000 if VMSPLIT_1G 1436 default 0x80000000 if VMSPLIT_2G 1437 default 0xB0000000 if VMSPLIT_3G_OPT 1438 default 0xC0000000 1439 1440config NR_CPUS 1441 int "Maximum number of CPUs (2-32)" 1442 range 2 32 1443 depends on SMP 1444 default "4" 1445 1446config HOTPLUG_CPU 1447 bool "Support for hot-pluggable CPUs" 1448 depends on SMP 1449 help 1450 Say Y here to experiment with turning CPUs off and on. CPUs 1451 can be controlled through /sys/devices/system/cpu. 1452 1453config ARM_PSCI 1454 bool "Support for the ARM Power State Coordination Interface (PSCI)" 1455 depends on HAVE_ARM_SMCCC 1456 select ARM_PSCI_FW 1457 help 1458 Say Y here if you want Linux to communicate with system firmware 1459 implementing the PSCI specification for CPU-centric power 1460 management operations described in ARM document number ARM DEN 1461 0022A ("Power State Coordination Interface System Software on 1462 ARM processors"). 1463 1464# The GPIO number here must be sorted by descending number. In case of 1465# a multiplatform kernel, we just want the highest value required by the 1466# selected platforms. 1467config ARCH_NR_GPIO 1468 int 1469 default 2048 if ARCH_SOCFPGA 1470 default 1024 if ARCH_BRCMSTB || ARCH_SHMOBILE || ARCH_TEGRA || \ 1471 ARCH_ZYNQ 1472 default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \ 1473 SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 1474 default 416 if ARCH_SUNXI 1475 default 392 if ARCH_U8500 1476 default 352 if ARCH_VT8500 1477 default 288 if ARCH_ROCKCHIP 1478 default 264 if MACH_H4700 1479 default 0 1480 help 1481 Maximum number of GPIOs in the system. 1482 1483 If unsure, leave the default value. 1484 1485source kernel/Kconfig.preempt 1486 1487config HZ_FIXED 1488 int 1489 default 200 if ARCH_EBSA110 1490 default 128 if SOC_AT91RM9200 1491 default 0 1492 1493choice 1494 depends on HZ_FIXED = 0 1495 prompt "Timer frequency" 1496 1497config HZ_100 1498 bool "100 Hz" 1499 1500config HZ_200 1501 bool "200 Hz" 1502 1503config HZ_250 1504 bool "250 Hz" 1505 1506config HZ_300 1507 bool "300 Hz" 1508 1509config HZ_500 1510 bool "500 Hz" 1511 1512config HZ_1000 1513 bool "1000 Hz" 1514 1515endchoice 1516 1517config HZ 1518 int 1519 default HZ_FIXED if HZ_FIXED != 0 1520 default 100 if HZ_100 1521 default 200 if HZ_200 1522 default 250 if HZ_250 1523 default 300 if HZ_300 1524 default 500 if HZ_500 1525 default 1000 1526 1527config SCHED_HRTICK 1528 def_bool HIGH_RES_TIMERS 1529 1530config THUMB2_KERNEL 1531 bool "Compile the kernel in Thumb-2 mode" if !CPU_THUMBONLY 1532 depends on (CPU_V7 || CPU_V7M) && !CPU_V6 && !CPU_V6K 1533 default y if CPU_THUMBONLY 1534 select AEABI 1535 select ARM_ASM_UNIFIED 1536 select ARM_UNWIND 1537 help 1538 By enabling this option, the kernel will be compiled in 1539 Thumb-2 mode. A compiler/assembler that understand the unified 1540 ARM-Thumb syntax is needed. 1541 1542 If unsure, say N. 1543 1544config THUMB2_AVOID_R_ARM_THM_JUMP11 1545 bool "Work around buggy Thumb-2 short branch relocations in gas" 1546 depends on THUMB2_KERNEL && MODULES 1547 default y 1548 help 1549 Various binutils versions can resolve Thumb-2 branches to 1550 locally-defined, preemptible global symbols as short-range "b.n" 1551 branch instructions. 1552 1553 This is a problem, because there's no guarantee the final 1554 destination of the symbol, or any candidate locations for a 1555 trampoline, are within range of the branch. For this reason, the 1556 kernel does not support fixing up the R_ARM_THM_JUMP11 (102) 1557 relocation in modules at all, and it makes little sense to add 1558 support. 1559 1560 The symptom is that the kernel fails with an "unsupported 1561 relocation" error when loading some modules. 1562 1563 Until fixed tools are available, passing 1564 -fno-optimize-sibling-calls to gcc should prevent gcc generating 1565 code which hits this problem, at the cost of a bit of extra runtime 1566 stack usage in some cases. 1567 1568 The problem is described in more detail at: 1569 https://bugs.launchpad.net/binutils-linaro/+bug/725126 1570 1571 Only Thumb-2 kernels are affected. 1572 1573 Unless you are sure your tools don't have this problem, say Y. 1574 1575config ARM_ASM_UNIFIED 1576 bool 1577 1578config ARM_PATCH_IDIV 1579 bool "Runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()" 1580 depends on CPU_32v7 && !XIP_KERNEL 1581 default y 1582 help 1583 The ARM compiler inserts calls to __aeabi_idiv() and 1584 __aeabi_uidiv() when it needs to perform division on signed 1585 and unsigned integers. Some v7 CPUs have support for the sdiv 1586 and udiv instructions that can be used to implement those 1587 functions. 1588 1589 Enabling this option allows the kernel to modify itself to 1590 replace the first two instructions of these library functions 1591 with the sdiv or udiv plus "bx lr" instructions when the CPU 1592 it is running on supports them. Typically this will be faster 1593 and less power intensive than running the original library 1594 code to do integer division. 1595 1596config AEABI 1597 bool "Use the ARM EABI to compile the kernel" 1598 help 1599 This option allows for the kernel to be compiled using the latest 1600 ARM ABI (aka EABI). This is only useful if you are using a user 1601 space environment that is also compiled with EABI. 1602 1603 Since there are major incompatibilities between the legacy ABI and 1604 EABI, especially with regard to structure member alignment, this 1605 option also changes the kernel syscall calling convention to 1606 disambiguate both ABIs and allow for backward compatibility support 1607 (selected with CONFIG_OABI_COMPAT). 1608 1609 To use this you need GCC version 4.0.0 or later. 1610 1611config OABI_COMPAT 1612 bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)" 1613 depends on AEABI && !THUMB2_KERNEL 1614 help 1615 This option preserves the old syscall interface along with the 1616 new (ARM EABI) one. It also provides a compatibility layer to 1617 intercept syscalls that have structure arguments which layout 1618 in memory differs between the legacy ABI and the new ARM EABI 1619 (only for non "thumb" binaries). This option adds a tiny 1620 overhead to all syscalls and produces a slightly larger kernel. 1621 1622 The seccomp filter system will not be available when this is 1623 selected, since there is no way yet to sensibly distinguish 1624 between calling conventions during filtering. 1625 1626 If you know you'll be using only pure EABI user space then you 1627 can say N here. If this option is not selected and you attempt 1628 to execute a legacy ABI binary then the result will be 1629 UNPREDICTABLE (in fact it can be predicted that it won't work 1630 at all). If in doubt say N. 1631 1632config ARCH_HAS_HOLES_MEMORYMODEL 1633 bool 1634 1635config ARCH_SPARSEMEM_ENABLE 1636 bool 1637 1638config ARCH_SPARSEMEM_DEFAULT 1639 def_bool ARCH_SPARSEMEM_ENABLE 1640 1641config ARCH_SELECT_MEMORY_MODEL 1642 def_bool ARCH_SPARSEMEM_ENABLE 1643 1644config HAVE_ARCH_PFN_VALID 1645 def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM 1646 1647config HAVE_GENERIC_GUP 1648 def_bool y 1649 depends on ARM_LPAE 1650 1651config HIGHMEM 1652 bool "High Memory Support" 1653 depends on MMU 1654 help 1655 The address space of ARM processors is only 4 Gigabytes large 1656 and it has to accommodate user address space, kernel address 1657 space as well as some memory mapped IO. That means that, if you 1658 have a large amount of physical memory and/or IO, not all of the 1659 memory can be "permanently mapped" by the kernel. The physical 1660 memory that is not permanently mapped is called "high memory". 1661 1662 Depending on the selected kernel/user memory split, minimum 1663 vmalloc space and actual amount of RAM, you may not need this 1664 option which should result in a slightly faster kernel. 1665 1666 If unsure, say n. 1667 1668config HIGHPTE 1669 bool "Allocate 2nd-level pagetables from highmem" if EXPERT 1670 depends on HIGHMEM 1671 default y 1672 help 1673 The VM uses one page of physical memory for each page table. 1674 For systems with a lot of processes, this can use a lot of 1675 precious low memory, eventually leading to low memory being 1676 consumed by page tables. Setting this option will allow 1677 user-space 2nd level page tables to reside in high memory. 1678 1679config CPU_SW_DOMAIN_PAN 1680 bool "Enable use of CPU domains to implement privileged no-access" 1681 depends on MMU && !ARM_LPAE 1682 default y 1683 help 1684 Increase kernel security by ensuring that normal kernel accesses 1685 are unable to access userspace addresses. This can help prevent 1686 use-after-free bugs becoming an exploitable privilege escalation 1687 by ensuring that magic values (such as LIST_POISON) will always 1688 fault when dereferenced. 1689 1690 CPUs with low-vector mappings use a best-efforts implementation. 1691 Their lower 1MB needs to remain accessible for the vectors, but 1692 the remainder of userspace will become appropriately inaccessible. 1693 1694config HW_PERF_EVENTS 1695 def_bool y 1696 depends on ARM_PMU 1697 1698config SYS_SUPPORTS_HUGETLBFS 1699 def_bool y 1700 depends on ARM_LPAE 1701 1702config HAVE_ARCH_TRANSPARENT_HUGEPAGE 1703 def_bool y 1704 depends on ARM_LPAE 1705 1706config ARCH_WANT_GENERAL_HUGETLB 1707 def_bool y 1708 1709config ARM_MODULE_PLTS 1710 bool "Use PLTs to allow module memory to spill over into vmalloc area" 1711 depends on MODULES 1712 help 1713 Allocate PLTs when loading modules so that jumps and calls whose 1714 targets are too far away for their relative offsets to be encoded 1715 in the instructions themselves can be bounced via veneers in the 1716 module's PLT. This allows modules to be allocated in the generic 1717 vmalloc area after the dedicated module memory area has been 1718 exhausted. The modules will use slightly more memory, but after 1719 rounding up to page size, the actual memory footprint is usually 1720 the same. 1721 1722 Say y if you are getting out of memory errors while loading modules 1723 1724source "mm/Kconfig" 1725 1726config FORCE_MAX_ZONEORDER 1727 int "Maximum zone order" 1728 default "12" if SOC_AM33XX 1729 default "9" if SA1111 || ARCH_EFM32 1730 default "11" 1731 help 1732 The kernel memory allocator divides physically contiguous memory 1733 blocks into "zones", where each zone is a power of two number of 1734 pages. This option selects the largest power of two that the kernel 1735 keeps in the memory allocator. If you need to allocate very large 1736 blocks of physically contiguous memory, then you may need to 1737 increase this value. 1738 1739 This config option is actually maximum order plus one. For example, 1740 a value of 11 means that the largest free memory block is 2^10 pages. 1741 1742config ALIGNMENT_TRAP 1743 bool 1744 depends on CPU_CP15_MMU 1745 default y if !ARCH_EBSA110 1746 select HAVE_PROC_CPU if PROC_FS 1747 help 1748 ARM processors cannot fetch/store information which is not 1749 naturally aligned on the bus, i.e., a 4 byte fetch must start at an 1750 address divisible by 4. On 32-bit ARM processors, these non-aligned 1751 fetch/store instructions will be emulated in software if you say 1752 here, which has a severe performance impact. This is necessary for 1753 correct operation of some network protocols. With an IP-only 1754 configuration it is safe to say N, otherwise say Y. 1755 1756config UACCESS_WITH_MEMCPY 1757 bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user()" 1758 depends on MMU 1759 default y if CPU_FEROCEON 1760 help 1761 Implement faster copy_to_user and clear_user methods for CPU 1762 cores where a 8-word STM instruction give significantly higher 1763 memory write throughput than a sequence of individual 32bit stores. 1764 1765 A possible side effect is a slight increase in scheduling latency 1766 between threads sharing the same address space if they invoke 1767 such copy operations with large buffers. 1768 1769 However, if the CPU data cache is using a write-allocate mode, 1770 this option is unlikely to provide any performance gain. 1771 1772config SECCOMP 1773 bool 1774 prompt "Enable seccomp to safely compute untrusted bytecode" 1775 ---help--- 1776 This kernel feature is useful for number crunching applications 1777 that may need to compute untrusted bytecode during their 1778 execution. By using pipes or other transports made available to 1779 the process as file descriptors supporting the read/write 1780 syscalls, it's possible to isolate those applications in 1781 their own address space using seccomp. Once seccomp is 1782 enabled via prctl(PR_SET_SECCOMP), it cannot be disabled 1783 and the task is only allowed to execute a few safe syscalls 1784 defined by each seccomp mode. 1785 1786config SWIOTLB 1787 def_bool y 1788 1789config IOMMU_HELPER 1790 def_bool SWIOTLB 1791 1792config PARAVIRT 1793 bool "Enable paravirtualization code" 1794 help 1795 This changes the kernel so it can modify itself when it is run 1796 under a hypervisor, potentially improving performance significantly 1797 over full virtualization. 1798 1799config PARAVIRT_TIME_ACCOUNTING 1800 bool "Paravirtual steal time accounting" 1801 select PARAVIRT 1802 default n 1803 help 1804 Select this option to enable fine granularity task steal time 1805 accounting. Time spent executing other tasks in parallel with 1806 the current vCPU is discounted from the vCPU power. To account for 1807 that, there can be a small performance impact. 1808 1809 If in doubt, say N here. 1810 1811config XEN_DOM0 1812 def_bool y 1813 depends on XEN 1814 1815config XEN 1816 bool "Xen guest support on ARM" 1817 depends on ARM && AEABI && OF 1818 depends on CPU_V7 && !CPU_V6 1819 depends on !GENERIC_ATOMIC64 1820 depends on MMU 1821 select ARCH_DMA_ADDR_T_64BIT 1822 select ARM_PSCI 1823 select SWIOTLB_XEN 1824 select PARAVIRT 1825 help 1826 Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. 1827 1828endmenu 1829 1830menu "Boot options" 1831 1832config USE_OF 1833 bool "Flattened Device Tree support" 1834 select IRQ_DOMAIN 1835 select OF 1836 help 1837 Include support for flattened device tree machine descriptions. 1838 1839config ATAGS 1840 bool "Support for the traditional ATAGS boot data passing" if USE_OF 1841 default y 1842 help 1843 This is the traditional way of passing data to the kernel at boot 1844 time. If you are solely relying on the flattened device tree (or 1845 the ARM_ATAG_DTB_COMPAT option) then you may unselect this option 1846 to remove ATAGS support from your kernel binary. If unsure, 1847 leave this to y. 1848 1849config DEPRECATED_PARAM_STRUCT 1850 bool "Provide old way to pass kernel parameters" 1851 depends on ATAGS 1852 help 1853 This was deprecated in 2001 and announced to live on for 5 years. 1854 Some old boot loaders still use this way. 1855 1856# Compressed boot loader in ROM. Yes, we really want to ask about 1857# TEXT and BSS so we preserve their values in the config files. 1858config ZBOOT_ROM_TEXT 1859 hex "Compressed ROM boot loader base address" 1860 default "0" 1861 help 1862 The physical address at which the ROM-able zImage is to be 1863 placed in the target. Platforms which normally make use of 1864 ROM-able zImage formats normally set this to a suitable 1865 value in their defconfig file. 1866 1867 If ZBOOT_ROM is not enabled, this has no effect. 1868 1869config ZBOOT_ROM_BSS 1870 hex "Compressed ROM boot loader BSS address" 1871 default "0" 1872 help 1873 The base address of an area of read/write memory in the target 1874 for the ROM-able zImage which must be available while the 1875 decompressor is running. It must be large enough to hold the 1876 entire decompressed kernel plus an additional 128 KiB. 1877 Platforms which normally make use of ROM-able zImage formats 1878 normally set this to a suitable value in their defconfig file. 1879 1880 If ZBOOT_ROM is not enabled, this has no effect. 1881 1882config ZBOOT_ROM 1883 bool "Compressed boot loader in ROM/flash" 1884 depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS 1885 depends on !ARM_APPENDED_DTB && !XIP_KERNEL && !AUTO_ZRELADDR 1886 help 1887 Say Y here if you intend to execute your compressed kernel image 1888 (zImage) directly from ROM or flash. If unsure, say N. 1889 1890config ARM_APPENDED_DTB 1891 bool "Use appended device tree blob to zImage (EXPERIMENTAL)" 1892 depends on OF 1893 help 1894 With this option, the boot code will look for a device tree binary 1895 (DTB) appended to zImage 1896 (e.g. cat zImage <filename>.dtb > zImage_w_dtb). 1897 1898 This is meant as a backward compatibility convenience for those 1899 systems with a bootloader that can't be upgraded to accommodate 1900 the documented boot protocol using a device tree. 1901 1902 Beware that there is very little in terms of protection against 1903 this option being confused by leftover garbage in memory that might 1904 look like a DTB header after a reboot if no actual DTB is appended 1905 to zImage. Do not leave this option active in a production kernel 1906 if you don't intend to always append a DTB. Proper passing of the 1907 location into r2 of a bootloader provided DTB is always preferable 1908 to this option. 1909 1910config ARM_ATAG_DTB_COMPAT 1911 bool "Supplement the appended DTB with traditional ATAG information" 1912 depends on ARM_APPENDED_DTB 1913 help 1914 Some old bootloaders can't be updated to a DTB capable one, yet 1915 they provide ATAGs with memory configuration, the ramdisk address, 1916 the kernel cmdline string, etc. Such information is dynamically 1917 provided by the bootloader and can't always be stored in a static 1918 DTB. To allow a device tree enabled kernel to be used with such 1919 bootloaders, this option allows zImage to extract the information 1920 from the ATAG list and store it at run time into the appended DTB. 1921 1922choice 1923 prompt "Kernel command line type" if ARM_ATAG_DTB_COMPAT 1924 default ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER 1925 1926config ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER 1927 bool "Use bootloader kernel arguments if available" 1928 help 1929 Uses the command-line options passed by the boot loader instead of 1930 the device tree bootargs property. If the boot loader doesn't provide 1931 any, the device tree bootargs property will be used. 1932 1933config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND 1934 bool "Extend with bootloader kernel arguments" 1935 help 1936 The command-line arguments provided by the boot loader will be 1937 appended to the the device tree bootargs property. 1938 1939endchoice 1940 1941config CMDLINE 1942 string "Default kernel command string" 1943 default "" 1944 help 1945 On some architectures (EBSA110 and CATS), there is currently no way 1946 for the boot loader to pass arguments to the kernel. For these 1947 architectures, you should supply some command-line options at build 1948 time by entering them here. As a minimum, you should specify the 1949 memory size and the root device (e.g., mem=64M root=/dev/nfs). 1950 1951choice 1952 prompt "Kernel command line type" if CMDLINE != "" 1953 default CMDLINE_FROM_BOOTLOADER 1954 depends on ATAGS 1955 1956config CMDLINE_FROM_BOOTLOADER 1957 bool "Use bootloader kernel arguments if available" 1958 help 1959 Uses the command-line options passed by the boot loader. If 1960 the boot loader doesn't provide any, the default kernel command 1961 string provided in CMDLINE will be used. 1962 1963config CMDLINE_EXTEND 1964 bool "Extend bootloader kernel arguments" 1965 help 1966 The command-line arguments provided by the boot loader will be 1967 appended to the default kernel command string. 1968 1969config CMDLINE_FORCE 1970 bool "Always use the default kernel command string" 1971 help 1972 Always use the default kernel command string, even if the boot 1973 loader passes other arguments to the kernel. 1974 This is useful if you cannot or don't want to change the 1975 command-line options your boot loader passes to the kernel. 1976endchoice 1977 1978config XIP_KERNEL 1979 bool "Kernel Execute-In-Place from ROM" 1980 depends on !ARM_LPAE && !ARCH_MULTIPLATFORM 1981 help 1982 Execute-In-Place allows the kernel to run from non-volatile storage 1983 directly addressable by the CPU, such as NOR flash. This saves RAM 1984 space since the text section of the kernel is not loaded from flash 1985 to RAM. Read-write sections, such as the data section and stack, 1986 are still copied to RAM. The XIP kernel is not compressed since 1987 it has to run directly from flash, so it will take more space to 1988 store it. The flash address used to link the kernel object files, 1989 and for storing it, is configuration dependent. Therefore, if you 1990 say Y here, you must know the proper physical address where to 1991 store the kernel image depending on your own flash memory usage. 1992 1993 Also note that the make target becomes "make xipImage" rather than 1994 "make zImage" or "make Image". The final kernel binary to put in 1995 ROM memory will be arch/arm/boot/xipImage. 1996 1997 If unsure, say N. 1998 1999config XIP_PHYS_ADDR 2000 hex "XIP Kernel Physical Location" 2001 depends on XIP_KERNEL 2002 default "0x00080000" 2003 help 2004 This is the physical address in your flash memory the kernel will 2005 be linked for and stored to. This address is dependent on your 2006 own flash usage. 2007 2008config KEXEC 2009 bool "Kexec system call (EXPERIMENTAL)" 2010 depends on (!SMP || PM_SLEEP_SMP) 2011 depends on !CPU_V7M 2012 select KEXEC_CORE 2013 help 2014 kexec is a system call that implements the ability to shutdown your 2015 current kernel, and to start another kernel. It is like a reboot 2016 but it is independent of the system firmware. And like a reboot 2017 you can start any kernel with it, not just Linux. 2018 2019 It is an ongoing process to be certain the hardware in a machine 2020 is properly shutdown, so do not be surprised if this code does not 2021 initially work for you. 2022 2023config ATAGS_PROC 2024 bool "Export atags in procfs" 2025 depends on ATAGS && KEXEC 2026 default y 2027 help 2028 Should the atags used to boot the kernel be exported in an "atags" 2029 file in procfs. Useful with kexec. 2030 2031config CRASH_DUMP 2032 bool "Build kdump crash kernel (EXPERIMENTAL)" 2033 help 2034 Generate crash dump after being started by kexec. This should 2035 be normally only set in special crash dump kernels which are 2036 loaded in the main kernel with kexec-tools into a specially 2037 reserved region and then later executed after a crash by 2038 kdump/kexec. The crash dump kernel must be compiled to a 2039 memory address not used by the main kernel 2040 2041 For more details see Documentation/kdump/kdump.txt 2042 2043config AUTO_ZRELADDR 2044 bool "Auto calculation of the decompressed kernel image address" 2045 help 2046 ZRELADDR is the physical address where the decompressed kernel 2047 image will be placed. If AUTO_ZRELADDR is selected, the address 2048 will be determined at run-time by masking the current IP with 2049 0xf8000000. This assumes the zImage being placed in the first 128MB 2050 from start of memory. 2051 2052config EFI_STUB 2053 bool 2054 2055config EFI 2056 bool "UEFI runtime support" 2057 depends on OF && !CPU_BIG_ENDIAN && MMU && AUTO_ZRELADDR && !XIP_KERNEL 2058 select UCS2_STRING 2059 select EFI_PARAMS_FROM_FDT 2060 select EFI_STUB 2061 select EFI_ARMSTUB 2062 select EFI_RUNTIME_WRAPPERS 2063 ---help--- 2064 This option provides support for runtime services provided 2065 by UEFI firmware (such as non-volatile variables, realtime 2066 clock, and platform reset). A UEFI stub is also provided to 2067 allow the kernel to be booted as an EFI application. This 2068 is only useful for kernels that may run on systems that have 2069 UEFI firmware. 2070 2071config DMI 2072 bool "Enable support for SMBIOS (DMI) tables" 2073 depends on EFI 2074 default y 2075 help 2076 This enables SMBIOS/DMI feature for systems. 2077 2078 This option is only useful on systems that have UEFI firmware. 2079 However, even with this option, the resultant kernel should 2080 continue to boot on existing non-UEFI platforms. 2081 2082 NOTE: This does *NOT* enable or encourage the use of DMI quirks, 2083 i.e., the the practice of identifying the platform via DMI to 2084 decide whether certain workarounds for buggy hardware and/or 2085 firmware need to be enabled. This would require the DMI subsystem 2086 to be enabled much earlier than we do on ARM, which is non-trivial. 2087 2088endmenu 2089 2090menu "CPU Power Management" 2091 2092source "drivers/cpufreq/Kconfig" 2093 2094source "drivers/cpuidle/Kconfig" 2095 2096endmenu 2097 2098menu "Floating point emulation" 2099 2100comment "At least one emulation must be selected" 2101 2102config FPE_NWFPE 2103 bool "NWFPE math emulation" 2104 depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL 2105 ---help--- 2106 Say Y to include the NWFPE floating point emulator in the kernel. 2107 This is necessary to run most binaries. Linux does not currently 2108 support floating point hardware so you need to say Y here even if 2109 your machine has an FPA or floating point co-processor podule. 2110 2111 You may say N here if you are going to load the Acorn FPEmulator 2112 early in the bootup. 2113 2114config FPE_NWFPE_XP 2115 bool "Support extended precision" 2116 depends on FPE_NWFPE 2117 help 2118 Say Y to include 80-bit support in the kernel floating-point 2119 emulator. Otherwise, only 32 and 64-bit support is compiled in. 2120 Note that gcc does not generate 80-bit operations by default, 2121 so in most cases this option only enlarges the size of the 2122 floating point emulator without any good reason. 2123 2124 You almost surely want to say N here. 2125 2126config FPE_FASTFPE 2127 bool "FastFPE math emulation (EXPERIMENTAL)" 2128 depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 2129 ---help--- 2130 Say Y here to include the FAST floating point emulator in the kernel. 2131 This is an experimental much faster emulator which now also has full 2132 precision for the mantissa. It does not support any exceptions. 2133 It is very simple, and approximately 3-6 times faster than NWFPE. 2134 2135 It should be sufficient for most programs. It may be not suitable 2136 for scientific calculations, but you have to check this for yourself. 2137 If you do not feel you need a faster FP emulation you should better 2138 choose NWFPE. 2139 2140config VFP 2141 bool "VFP-format floating point maths" 2142 depends on CPU_V6 || CPU_V6K || CPU_ARM926T || CPU_V7 || CPU_FEROCEON 2143 help 2144 Say Y to include VFP support code in the kernel. This is needed 2145 if your hardware includes a VFP unit. 2146 2147 Please see <file:Documentation/arm/VFP/release-notes.txt> for 2148 release notes and additional status information. 2149 2150 Say N if your target does not have VFP hardware. 2151 2152config VFPv3 2153 bool 2154 depends on VFP 2155 default y if CPU_V7 2156 2157config NEON 2158 bool "Advanced SIMD (NEON) Extension support" 2159 depends on VFPv3 && CPU_V7 2160 help 2161 Say Y to include support code for NEON, the ARMv7 Advanced SIMD 2162 Extension. 2163 2164config KERNEL_MODE_NEON 2165 bool "Support for NEON in kernel mode" 2166 depends on NEON && AEABI 2167 help 2168 Say Y to include support for NEON in kernel mode. 2169 2170endmenu 2171 2172menu "Userspace binary formats" 2173 2174source "fs/Kconfig.binfmt" 2175 2176endmenu 2177 2178menu "Power management options" 2179 2180source "kernel/power/Kconfig" 2181 2182config ARCH_SUSPEND_POSSIBLE 2183 depends on CPU_ARM920T || CPU_ARM926T || CPU_FEROCEON || CPU_SA1100 || \ 2184 CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK 2185 def_bool y 2186 2187config ARM_CPU_SUSPEND 2188 def_bool PM_SLEEP || BL_SWITCHER || ARM_PSCI_FW 2189 depends on ARCH_SUSPEND_POSSIBLE 2190 2191config ARCH_HIBERNATION_POSSIBLE 2192 bool 2193 depends on MMU 2194 default y if ARCH_SUSPEND_POSSIBLE 2195 2196endmenu 2197 2198source "net/Kconfig" 2199 2200source "drivers/Kconfig" 2201 2202source "drivers/firmware/Kconfig" 2203 2204source "fs/Kconfig" 2205 2206source "arch/arm/Kconfig.debug" 2207 2208source "security/Kconfig" 2209 2210source "crypto/Kconfig" 2211if CRYPTO 2212source "arch/arm/crypto/Kconfig" 2213endif 2214 2215source "lib/Kconfig" 2216 2217source "arch/arm/kvm/Kconfig" 2218