1/* 2 * Copyright (C) 2014, 2015 Synopsys, Inc. (www.synopsys.com) 3 * 4 * This program is free software; you can redistribute it and/or modify 5 * it under the terms of the GNU General Public License version 2 as 6 * published by the Free Software Foundation. 7 */ 8 9/* 10 * Device tree for AXC003 CPU card: HS38x2 (Dual Core) with IDU intc 11 */ 12 13/include/ "skeleton_hs_idu.dtsi" 14 15/ { 16 compatible = "snps,arc"; 17 #address-cells = <2>; 18 #size-cells = <2>; 19 20 cpu_card { 21 compatible = "simple-bus"; 22 #address-cells = <1>; 23 #size-cells = <1>; 24 25 ranges = <0x00000000 0x0 0xf0000000 0x10000000>; 26 27 input_clk: input-clk { 28 #clock-cells = <0>; 29 compatible = "fixed-clock"; 30 clock-frequency = <33333333>; 31 }; 32 33 core_clk: core-clk@80 { 34 compatible = "snps,axs10x-arc-pll-clock"; 35 reg = <0x80 0x10>, <0x100 0x10>; 36 #clock-cells = <0>; 37 clocks = <&input_clk>; 38 39 /* 40 * Set initial core pll output frequency to 100MHz. 41 * It will be applied at the core pll driver probing 42 * on early boot. 43 */ 44 assigned-clocks = <&core_clk>; 45 assigned-clock-rates = <100000000>; 46 }; 47 48 core_intc: archs-intc@cpu { 49 compatible = "snps,archs-intc"; 50 interrupt-controller; 51 #interrupt-cells = <1>; 52 }; 53 54 idu_intc: idu-interrupt-controller { 55 compatible = "snps,archs-idu-intc"; 56 interrupt-controller; 57 interrupt-parent = <&core_intc>; 58 #interrupt-cells = <1>; 59 }; 60 61 /* 62 * this GPIO block ORs all interrupts on CPU card (creg,..) 63 * to uplink only 1 IRQ to ARC core intc 64 */ 65 dw-apb-gpio@0x2000 { 66 compatible = "snps,dw-apb-gpio"; 67 reg = < 0x2000 0x80 >; 68 #address-cells = <1>; 69 #size-cells = <0>; 70 71 ictl_intc: gpio-controller@0 { 72 compatible = "snps,dw-apb-gpio-port"; 73 gpio-controller; 74 #gpio-cells = <2>; 75 snps,nr-gpios = <30>; 76 reg = <0>; 77 interrupt-controller; 78 #interrupt-cells = <2>; 79 interrupt-parent = <&idu_intc>; 80 interrupts = <1>; 81 }; 82 }; 83 84 debug_uart: dw-apb-uart@0x5000 { 85 compatible = "snps,dw-apb-uart"; 86 reg = <0x5000 0x100>; 87 clock-frequency = <33333000>; 88 interrupt-parent = <&ictl_intc>; 89 interrupts = <2 4>; 90 baud = <115200>; 91 reg-shift = <2>; 92 reg-io-width = <4>; 93 }; 94 95 arcpct0: pct { 96 compatible = "snps,archs-pct"; 97 #interrupt-cells = <1>; 98 interrupt-parent = <&core_intc>; 99 interrupts = <20>; 100 }; 101 }; 102 103 /* 104 * Mark DMA peripherals connected via IOC port as dma-coherent. We do 105 * it via overlay because peripherals defined in axs10x_mb.dtsi are 106 * used for both AXS101 and AXS103 boards and only AXS103 has IOC (so 107 * only AXS103 board has HW-coherent DMA peripherals) 108 * We don't need to mark pgu@17000 as dma-coherent because it uses 109 * external DMA buffer located outside of IOC aperture. 110 */ 111 axs10x_mb { 112 ethernet@0x18000 { 113 dma-coherent; 114 }; 115 116 ehci@0x40000 { 117 dma-coherent; 118 }; 119 120 ohci@0x60000 { 121 dma-coherent; 122 }; 123 124 mmc@0x15000 { 125 dma-coherent; 126 }; 127 }; 128 129 /* 130 * This INTC is actually connected to DW APB GPIO 131 * which acts as a wire between MB INTC and CPU INTC. 132 * GPIO INTC is configured in platform init code 133 * and here we mimic direct connection from MB INTC to 134 * CPU INTC, thus we set "interrupts = <0 1>" instead of 135 * "interrupts = <12>" 136 * 137 * This intc actually resides on MB, but we move it here to 138 * avoid duplicating the MB dtsi file given that IRQ from 139 * this intc to cpu intc are different for axs101 and axs103 140 */ 141 mb_intc: dw-apb-ictl@0xe0012000 { 142 #interrupt-cells = <1>; 143 compatible = "snps,dw-apb-ictl"; 144 reg = < 0x0 0xe0012000 0x0 0x200 >; 145 interrupt-controller; 146 interrupt-parent = <&idu_intc>; 147 interrupts = <0>; 148 }; 149 150 memory { 151 device_type = "memory"; 152 /* CONFIG_LINUX_RAM_BASE needs to match low mem start */ 153 reg = <0x0 0x80000000 0x0 0x20000000 /* 512 MiB low mem */ 154 0x1 0xc0000000 0x0 0x40000000>; /* 1 GiB highmem */ 155 }; 156 157 reserved-memory { 158 #address-cells = <2>; 159 #size-cells = <2>; 160 ranges; 161 /* 162 * Move frame buffer out of IOC aperture (0x8z-0xAz). 163 */ 164 frame_buffer: frame_buffer@be000000 { 165 compatible = "shared-dma-pool"; 166 reg = <0x0 0xbe000000 0x0 0x2000000>; 167 no-map; 168 }; 169 }; 170}; 171