1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pinctrl/qcom,sdx65-tlmm.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm Technologies, Inc. SDX65 TLMM block
8
9maintainers:
10  - Vamsi krishna Lanka <quic_vamslank@quicinc.com>
11
12description:
13  Top Level Mode Multiplexer pin controller in Qualcomm SDX65 SoC.
14
15properties:
16  compatible:
17    const: qcom,sdx65-tlmm
18
19  reg:
20    maxItems: 1
21
22  interrupts:
23    maxItems: 1
24
25  interrupt-controller: true
26  "#interrupt-cells": true
27  gpio-controller: true
28  "#gpio-cells": true
29  gpio-ranges: true
30
31  gpio-reserved-ranges:
32    maxItems: 1
33
34patternProperties:
35  "-state$":
36    oneOf:
37      - $ref: "#/$defs/qcom-sdx65-tlmm-state"
38      - patternProperties:
39          "-pins$":
40            $ref: "#/$defs/qcom-sdx65-tlmm-state"
41        additionalProperties: false
42
43$defs:
44  qcom-sdx65-tlmm-state:
45    type: object
46    description:
47      Pinctrl node's client devices use subnodes for desired pin configuration.
48      Client device subnodes use below standard properties.
49    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
50    unevaluatedProperties: false
51
52    properties:
53      pins:
54        description:
55          List of gpio pins affected by the properties specified in this subnode.
56        items:
57          oneOf:
58            - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-7])$"
59            - enum: [ ufs_reset, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data, sdc1_rclk ]
60        minItems: 1
61        maxItems: 150
62
63      function:
64        description:
65          Specify the alternative function to be configured for the specified
66          pins. Functions are only valid for gpio pins.
67        enum: [ blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens,
68                bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8,
69                qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b,
70                dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10,
71                blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12,
72                mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11,
73                atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char,
74                cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b,
75                pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c,
76                qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4,
77                qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5,
78                atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6,
79                atest_usb20, atest_char0, dac_calib10, qdss_stm10,
80                qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6,
81                blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11,
82                qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1,
83                qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11,
84                dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6,
85                qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14,
86                dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem,
87                dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto,
88                dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0,
89                dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25,
90                sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2,
91                qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3,
92                uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9,
93                blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7,
94                qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11,
95                blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0,
96                cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4,
97                blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4,
98                qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus,
99                isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s,
100                qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b,
101                sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b,
102                gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12,
103                qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29,
104                tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27,
105                qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk,
106                sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b,
107                sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b,
108                ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b,
109                blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt,
110                pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11,
111                qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx,
112                qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3,
113                gpio ]
114
115    required:
116      - pins
117
118allOf:
119  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
120
121required:
122  - compatible
123  - reg
124
125additionalProperties: false
126
127examples:
128  - |
129    #include <dt-bindings/interrupt-controller/arm-gic.h>
130    tlmm: pinctrl@f100000 {
131        compatible = "qcom,sdx65-tlmm";
132        reg = <0x03000000 0xdc2000>;
133        gpio-controller;
134        #gpio-cells = <2>;
135        gpio-ranges = <&tlmm 0 0 109>;
136        interrupt-controller;
137        #interrupt-cells = <2>;
138        interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
139
140        gpio-wo-subnode-state {
141            pins = "gpio1";
142            function = "gpio";
143        };
144
145        uart-w-subnodes-state {
146            rx-pins {
147                pins = "gpio4";
148                function = "blsp_uart1";
149                bias-pull-up;
150            };
151
152            tx-pins {
153                pins = "gpio5";
154                function = "blsp_uart1";
155                bias-disable;
156            };
157        };
158    };
159...
160