1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/memory-controllers/renesas,rpc-if.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Renesas Reduced Pin Count Interface (RPC-IF)
8
9maintainers:
10  - Sergei Shtylyov <sergei.shtylyov@gmail.com>
11
12description: |
13  Renesas RPC-IF allows a SPI flash or HyperFlash connected to the SoC to
14  be accessed via the external address space read mode or the manual mode.
15
16  The flash chip itself should be represented by a subnode of the RPC-IF node.
17  The flash interface is selected based on the "compatible" property of this
18  subnode:
19  - if it contains "jedec,spi-nor", then SPI is used;
20  - if it contains "cfi-flash", then HyperFlash is used.
21
22allOf:
23  - $ref: "/schemas/spi/spi-controller.yaml#"
24
25properties:
26  compatible:
27    items:
28      - enum:
29          - renesas,r8a77970-rpc-if       # R-Car V3M
30          - renesas,r8a77980-rpc-if       # R-Car V3H
31          - renesas,r8a77995-rpc-if       # R-Car D3
32      - const: renesas,rcar-gen3-rpc-if   # a generic R-Car gen3 device
33
34  reg:
35    items:
36      - description: RPC-IF registers
37      - description: direct mapping read mode area
38      - description: write buffer area
39
40  reg-names:
41    items:
42      - const: regs
43      - const: dirmap
44      - const: wbuf
45
46  clocks:
47    maxItems: 1
48
49  power-domains:
50    maxItems: 1
51
52  resets:
53    maxItems: 1
54
55patternProperties:
56  "flash@[0-9a-f]+$":
57    type: object
58    properties:
59      compatible:
60        enum:
61          - cfi-flash
62          - jedec,spi-nor
63
64examples:
65  - |
66    #include <dt-bindings/clock/renesas-cpg-mssr.h>
67    #include <dt-bindings/power/r8a77995-sysc.h>
68
69    spi@ee200000 {
70      compatible = "renesas,r8a77995-rpc-if", "renesas,rcar-gen3-rpc-if";
71      reg = <0xee200000 0x200>,
72            <0x08000000 0x4000000>,
73            <0xee208000 0x100>;
74      reg-names = "regs", "dirmap", "wbuf";
75      clocks = <&cpg CPG_MOD 917>;
76      power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
77      resets = <&cpg 917>;
78      #address-cells = <1>;
79      #size-cells = <0>;
80
81      flash@0 {
82        compatible = "jedec,spi-nor";
83        reg = <0>;
84        spi-max-frequency = <40000000>;
85        spi-tx-bus-width = <1>;
86        spi-rx-bus-width = <1>;
87      };
88    };
89