xref: /openbmc/linux/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts (revision 21ef649998e63a667f0439e440d731bf28f94f92) 
1// SPDX-License-Identifier: GPL-2.0-or-later
2// Copyright 2022 Facebook Inc.
3
4/dts-v1/;
5#include "aspeed-g6.dtsi"
6#include <dt-bindings/gpio/aspeed-gpio.h>
7#include <dt-bindings/leds/leds-pca955x.h>
8#include <dt-bindings/i2c/i2c.h>
9
10/ {
11	model = "Facebook Yosemite 4 BMC";
12	compatible = "facebook,yosemite4-bmc", "aspeed,ast2600";
13
14	aliases {
15		serial4 = &uart5;
16		serial5 = &uart6;
17		serial6 = &uart7;
18		serial7 = &uart8;
19		serial8 = &uart9;
20
21		i2c16 = &imux16;
22		i2c17 = &imux17;
23		i2c18 = &imux18;
24		i2c19 = &imux19;
25		i2c20 = &imux20;
26		i2c21 = &imux21;
27		i2c22 = &imux22;
28		i2c23 = &imux23;
29		i2c24 = &imux24;
30		i2c25 = &imux25;
31		i2c26 = &imux26;
32		i2c27 = &imux27;
33		i2c28 = &imux28;
34		i2c29 = &imux29;
35		i2c30 = &imux30;
36		i2c31 = &imux31;
37		i2c32 = &imux32;
38		i2c33 = &imux33;
39		i2c34 = &imux34;
40		i2c35 = &imux35;
41	};
42
43	chosen {
44		stdout-path = "serial4:57600n8";
45	};
46
47	memory@80000000 {
48		device_type = "memory";
49		reg = <0x80000000 0x80000000>;
50	};
51
52	iio-hwmon {
53		compatible = "iio-hwmon";
54		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
55				<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
56				<&adc1 0>, <&adc1 1>, <&adc1 7>;
57	};
58
59	spi {
60		compatible = "spi-gpio";
61		#address-cells = <1>;
62		#size-cells = <0>;
63
64		sck-gpios = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
65		mosi-gpios = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
66		miso-gpios = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
67		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
68		num-chipselects = <1>;
69
70		tpm@0 {
71			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
72			reg = <0>;
73			spi-max-frequency = <33000000>;
74		};
75	};
76};
77
78&uart1 {
79	status = "okay";
80};
81
82&uart2 {
83	status = "okay";
84};
85
86&uart3 {
87	status = "okay";
88};
89
90&uart4 {
91	status = "okay";
92};
93
94&uart5 {
95	status = "okay";
96};
97
98&uart6 {
99	status = "okay";
100};
101
102&uart7 {
103	status = "okay";
104};
105
106&uart8 {
107	status = "okay";
108};
109
110&uart9 {
111	status = "okay";
112};
113
114&wdt1 {
115	status = "okay";
116	pinctrl-names = "default";
117	pinctrl-0 = <&pinctrl_wdtrst1_default>;
118	aspeed,reset-type = "soc";
119	aspeed,external-signal;
120	aspeed,ext-push-pull;
121	aspeed,ext-active-high;
122	aspeed,ext-pulse-duration = <256>;
123};
124
125&wdt2 {
126	status = "okay";
127	pinctrl-names = "default";
128	pinctrl-0 = <&pinctrl_wdtrst2_default>;
129	aspeed,reset-type = "system";
130};
131
132&mac2 {
133	status = "okay";
134	pinctrl-names = "default";
135	pinctrl-0 = <&pinctrl_rmii3_default>;
136	use-ncsi;
137	mellanox,multi-host;
138};
139
140&mac3 {
141	status = "okay";
142	pinctrl-names = "default";
143	pinctrl-0 = <&pinctrl_rmii4_default>;
144	use-ncsi;
145	mellanox,multi-host;
146};
147
148&fmc {
149	status = "okay";
150	flash@0 {
151		status = "okay";
152		m25p,fast-read;
153		label = "bmc";
154		spi-tx-bus-width = <2>;
155		spi-rx-bus-width = <2>;
156		spi-max-frequency = <50000000>;
157#include "openbmc-flash-layout-128.dtsi"
158	};
159	flash@1 {
160		status = "okay";
161		m25p,fast-read;
162		label = "alt-bmc";
163		spi-tx-bus-width = <2>;
164		spi-rx-bus-width = <2>;
165		spi-max-frequency = <50000000>;
166	};
167};
168
169&i2c0 {
170	status = "okay";
171	mctp-controller;
172	bus-frequency = <400000>;
173	multi-master;
174
175	mctp@10 {
176		compatible = "mctp-i2c-controller";
177		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
178	};
179
180	gpio@21 {
181		compatible = "nxp,pca9506";
182		reg = <0x21>;
183		gpio-controller;
184		#gpio-cells = <2>;
185	};
186
187	gpio@22 {
188		compatible = "nxp,pca9506";
189		reg = <0x22>;
190		gpio-controller;
191		#gpio-cells = <2>;
192	};
193
194	gpio@23 {
195		compatible = "nxp,pca9506";
196		reg = <0x23>;
197		gpio-controller;
198		#gpio-cells = <2>;
199	};
200
201	gpio@24 {
202		compatible = "nxp,pca9506";
203		reg = <0x24>;
204		gpio-controller;
205		#gpio-cells = <2>;
206	};
207
208	power-sensor@40 {
209		compatible = "adi,adm1281";
210		reg = <0x40>;
211		shunt-resistor-micro-ohms = <500>;
212	};
213};
214
215&i2c1 {
216	status = "okay";
217	mctp-controller;
218	bus-frequency = <400000>;
219	multi-master;
220
221	mctp@10 {
222		compatible = "mctp-i2c-controller";
223		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
224	};
225
226	gpio@21 {
227		compatible = "nxp,pca9506";
228		reg = <0x21>;
229		gpio-controller;
230		#gpio-cells = <2>;
231	};
232
233	gpio@22 {
234		compatible = "nxp,pca9506";
235		reg = <0x22>;
236		gpio-controller;
237		#gpio-cells = <2>;
238	};
239
240	gpio@23 {
241		compatible = "nxp,pca9506";
242		reg = <0x23>;
243		gpio-controller;
244		#gpio-cells = <2>;
245	};
246
247	gpio@24 {
248		compatible = "nxp,pca9506";
249		reg = <0x24>;
250		gpio-controller;
251		#gpio-cells = <2>;
252	};
253
254	power-sensor@40 {
255		compatible = "adi,adm1281";
256		reg = <0x40>;
257		shunt-resistor-micro-ohms = <500>;
258	};
259};
260
261&i2c2 {
262	status = "okay";
263	mctp-controller;
264	bus-frequency = <400000>;
265	multi-master;
266
267	mctp@10 {
268		compatible = "mctp-i2c-controller";
269		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
270	};
271
272	gpio@21 {
273		compatible = "nxp,pca9506";
274		reg = <0x21>;
275		gpio-controller;
276		#gpio-cells = <2>;
277	};
278
279	gpio@22 {
280		compatible = "nxp,pca9506";
281		reg = <0x22>;
282		gpio-controller;
283		#gpio-cells = <2>;
284	};
285
286	gpio@23 {
287		compatible = "nxp,pca9506";
288		reg = <0x23>;
289		gpio-controller;
290		#gpio-cells = <2>;
291	};
292
293	gpio@24 {
294		compatible = "nxp,pca9506";
295		reg = <0x24>;
296		gpio-controller;
297		#gpio-cells = <2>;
298	};
299
300	power-sensor@40 {
301		compatible = "adi,adm1281";
302		reg = <0x40>;
303		shunt-resistor-micro-ohms = <500>;
304	};
305};
306
307&i2c3 {
308	status = "okay";
309	mctp-controller;
310	bus-frequency = <400000>;
311	multi-master;
312
313	mctp@10 {
314		compatible = "mctp-i2c-controller";
315		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
316	};
317
318	gpio@21 {
319		compatible = "nxp,pca9506";
320		reg = <0x21>;
321		gpio-controller;
322		#gpio-cells = <2>;
323	};
324
325	gpio@22 {
326		compatible = "nxp,pca9506";
327		reg = <0x22>;
328		gpio-controller;
329		#gpio-cells = <2>;
330	};
331
332	gpio@23 {
333		compatible = "nxp,pca9506";
334		reg = <0x23>;
335		gpio-controller;
336		#gpio-cells = <2>;
337	};
338
339	gpio@24 {
340		compatible = "nxp,pca9506";
341		reg = <0x24>;
342		gpio-controller;
343		#gpio-cells = <2>;
344	};
345
346	power-sensor@40 {
347		compatible = "adi,adm1281";
348		reg = <0x40>;
349		shunt-resistor-micro-ohms = <500>;
350	};
351};
352
353&i2c4 {
354	status = "okay";
355	mctp-controller;
356	bus-frequency = <400000>;
357	multi-master;
358
359	mctp@10 {
360		compatible = "mctp-i2c-controller";
361		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
362	};
363
364	gpio@21 {
365		compatible = "nxp,pca9506";
366		reg = <0x21>;
367		gpio-controller;
368		#gpio-cells = <2>;
369	};
370
371	gpio@22 {
372		compatible = "nxp,pca9506";
373		reg = <0x22>;
374		gpio-controller;
375		#gpio-cells = <2>;
376	};
377
378	gpio@23 {
379		compatible = "nxp,pca9506";
380		reg = <0x23>;
381		gpio-controller;
382		#gpio-cells = <2>;
383	};
384
385	gpio@24 {
386		compatible = "nxp,pca9506";
387		reg = <0x24>;
388		gpio-controller;
389		#gpio-cells = <2>;
390	};
391
392	power-sensor@40 {
393		compatible = "adi,adm1281";
394		reg = <0x40>;
395		shunt-resistor-micro-ohms = <500>;
396	};
397};
398
399&i2c5 {
400	status = "okay";
401	mctp-controller;
402	bus-frequency = <400000>;
403	multi-master;
404
405	mctp@10 {
406		compatible = "mctp-i2c-controller";
407		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
408	};
409
410	gpio@21 {
411		compatible = "nxp,pca9506";
412		reg = <0x21>;
413		gpio-controller;
414		#gpio-cells = <2>;
415	};
416
417	gpio@22 {
418		compatible = "nxp,pca9506";
419		reg = <0x22>;
420		gpio-controller;
421		#gpio-cells = <2>;
422	};
423
424	gpio@23 {
425		compatible = "nxp,pca9506";
426		reg = <0x23>;
427		gpio-controller;
428		#gpio-cells = <2>;
429	};
430
431	gpio@24 {
432		compatible = "nxp,pca9506";
433		reg = <0x24>;
434		gpio-controller;
435		#gpio-cells = <2>;
436	};
437
438	power-sensor@40 {
439		compatible = "adi,adm1281";
440		reg = <0x40>;
441		shunt-resistor-micro-ohms = <500>;
442	};
443};
444
445&i2c6 {
446	status = "okay";
447	mctp-controller;
448	bus-frequency = <400000>;
449	multi-master;
450
451	mctp@10 {
452		compatible = "mctp-i2c-controller";
453		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
454	};
455
456	gpio@21 {
457		compatible = "nxp,pca9506";
458		reg = <0x21>;
459		gpio-controller;
460		#gpio-cells = <2>;
461	};
462
463	gpio@22 {
464		compatible = "nxp,pca9506";
465		reg = <0x22>;
466		gpio-controller;
467		#gpio-cells = <2>;
468	};
469
470	gpio@23 {
471		compatible = "nxp,pca9506";
472		reg = <0x23>;
473		gpio-controller;
474		#gpio-cells = <2>;
475	};
476
477	gpio@24 {
478		compatible = "nxp,pca9506";
479		reg = <0x24>;
480		gpio-controller;
481		#gpio-cells = <2>;
482	};
483
484	power-sensor@40 {
485		compatible = "adi,adm1281";
486		reg = <0x40>;
487		shunt-resistor-micro-ohms = <500>;
488	};
489};
490
491&i2c7 {
492	status = "okay";
493	mctp-controller;
494	bus-frequency = <400000>;
495	multi-master;
496
497	mctp@10 {
498		compatible = "mctp-i2c-controller";
499		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
500	};
501
502	gpio@21 {
503		compatible = "nxp,pca9506";
504		reg = <0x21>;
505		gpio-controller;
506		#gpio-cells = <2>;
507	};
508
509	gpio@22 {
510		compatible = "nxp,pca9506";
511		reg = <0x22>;
512		gpio-controller;
513		#gpio-cells = <2>;
514	};
515
516	gpio@23 {
517		compatible = "nxp,pca9506";
518		reg = <0x23>;
519		gpio-controller;
520		#gpio-cells = <2>;
521	};
522
523	gpio@24 {
524		compatible = "nxp,pca9506";
525		reg = <0x24>;
526		gpio-controller;
527		#gpio-cells = <2>;
528	};
529
530	power-sensor@40 {
531		compatible = "adi,adm1281";
532		reg = <0x40>;
533		shunt-resistor-micro-ohms = <500>;
534	};
535};
536
537&i2c8 {
538	#address-cells = <1>;
539	#size-cells = <0>;
540	status = "okay";
541	bus-frequency = <400000>;
542	i2c-mux@70 {
543		compatible = "nxp,pca9544";
544		reg = <0x70>;
545		#address-cells = <1>;
546		#size-cells = <0>;
547		i2c-mux-idle-disconnect;
548
549		imux16: i2c@0 {
550			reg = <0>;
551			#address-cells = <1>;
552			#size-cells = <0>;
553			gpio@49 {
554				compatible = "nxp,pca9537";
555				reg = <0x49>;
556				gpio-controller;
557				#gpio-cells = <2>;
558			};
559
560			eeprom@50 {
561				compatible = "atmel,24c128";
562				reg = <0x50>;
563			};
564
565			eeprom@51 {
566				compatible = "atmel,24c128";
567				reg = <0x51>;
568			};
569
570			eeprom@54 {
571				compatible = "atmel,24c128";
572				reg = <0x54>;
573			};
574		};
575
576		imux17: i2c@1 {
577			reg = <1>;
578			#address-cells = <1>;
579			#size-cells = <0>;
580			gpio@49 {
581				compatible = "nxp,pca9537";
582				reg = <0x49>;
583				gpio-controller;
584				#gpio-cells = <2>;
585			};
586
587			eeprom@50 {
588				compatible = "atmel,24c128";
589				reg = <0x50>;
590			};
591
592			eeprom@51 {
593				compatible = "atmel,24c128";
594				reg = <0x51>;
595			};
596
597			eeprom@54 {
598				compatible = "atmel,24c128";
599				reg = <0x54>;
600			};
601		};
602
603		imux18: i2c@2 {
604			reg = <2>;
605			#address-cells = <1>;
606			#size-cells = <0>;
607			gpio@49 {
608				compatible = "nxp,pca9537";
609				reg = <0x49>;
610				gpio-controller;
611				#gpio-cells = <2>;
612			};
613
614			eeprom@50 {
615				compatible = "atmel,24c128";
616				reg = <0x50>;
617			};
618
619			eeprom@51 {
620				compatible = "atmel,24c128";
621				reg = <0x51>;
622			};
623
624			eeprom@54 {
625				compatible = "atmel,24c128";
626				reg = <0x54>;
627			};
628		};
629
630		imux19: i2c@3 {
631			reg = <3>;
632			#address-cells = <1>;
633			#size-cells = <0>;
634			gpio@49 {
635				compatible = "nxp,pca9537";
636				reg = <0x49>;
637				gpio-controller;
638				#gpio-cells = <2>;
639			};
640
641			eeprom@50 {
642				compatible = "atmel,24c128";
643				reg = <0x50>;
644			};
645
646			eeprom@51 {
647				compatible = "atmel,24c128";
648				reg = <0x51>;
649			};
650
651			eeprom@54 {
652				compatible = "atmel,24c128";
653				reg = <0x54>;
654			};
655		};
656	};
657};
658
659&i2c9 {
660	#address-cells = <1>;
661	#size-cells = <0>;
662	status = "okay";
663	bus-frequency = <400000>;
664	i2c-mux@71 {
665		compatible = "nxp,pca9544";
666		reg = <0x71>;
667		#address-cells = <1>;
668		#size-cells = <0>;
669		i2c-mux-idle-disconnect;
670
671		imux20: i2c@0 {
672			reg = <0>;
673			#address-cells = <1>;
674			#size-cells = <0>;
675			gpio@49 {
676				compatible = "nxp,pca9537";
677				reg = <0x49>;
678				gpio-controller;
679				#gpio-cells = <2>;
680			};
681
682			eeprom@50 {
683				compatible = "atmel,24c128";
684				reg = <0x50>;
685			};
686
687			eeprom@51 {
688				compatible = "atmel,24c128";
689				reg = <0x51>;
690			};
691
692			eeprom@54 {
693				compatible = "atmel,24c128";
694				reg = <0x54>;
695			};
696		};
697
698		imux21: i2c@1 {
699			reg = <1>;
700			#address-cells = <1>;
701			#size-cells = <0>;
702			gpio@49 {
703				compatible = "nxp,pca9537";
704				reg = <0x49>;
705				gpio-controller;
706				#gpio-cells = <2>;
707			};
708
709			eeprom@50 {
710				compatible = "atmel,24c128";
711				reg = <0x50>;
712			};
713
714			eeprom@51 {
715				compatible = "atmel,24c128";
716				reg = <0x51>;
717			};
718
719			eeprom@54 {
720				compatible = "atmel,24c128";
721				reg = <0x54>;
722			};
723		};
724
725		imux22: i2c@2 {
726			reg = <2>;
727			#address-cells = <1>;
728			#size-cells = <0>;
729			gpio@49 {
730				compatible = "nxp,pca9537";
731				reg = <0x49>;
732				gpio-controller;
733				#gpio-cells = <2>;
734			};
735
736			eeprom@50 {
737				compatible = "atmel,24c128";
738				reg = <0x50>;
739			};
740
741			eeprom@51 {
742				compatible = "atmel,24c128";
743				reg = <0x51>;
744			};
745
746			eeprom@54 {
747				compatible = "atmel,24c128";
748				reg = <0x54>;
749			};
750		};
751
752		imux23: i2c@3 {
753			reg = <3>;
754			#address-cells = <1>;
755			#size-cells = <0>;
756			gpio@49 {
757				compatible = "nxp,pca9537";
758				reg = <0x49>;
759				gpio-controller;
760				#gpio-cells = <2>;
761			};
762
763			eeprom@50 {
764				compatible = "atmel,24c128";
765				reg = <0x50>;
766			};
767
768			eeprom@51 {
769				compatible = "atmel,24c128";
770				reg = <0x51>;
771			};
772
773			eeprom@54 {
774				compatible = "atmel,24c128";
775				reg = <0x54>;
776			};
777		};
778	};
779};
780
781&i2c10 {
782	#address-cells = <1>;
783	#size-cells = <0>;
784	status = "okay";
785	bus-frequency = <400000>;
786	i2c-mux@74 {
787		compatible = "nxp,pca9544";
788		reg = <0x74>;
789		#address-cells = <1>;
790		#size-cells = <0>;
791		i2c-mux-idle-disconnect;
792
793		imux28: i2c@0 {
794			reg = <0>;
795			#address-cells = <1>;
796			#size-cells = <0>;
797
798			gpio@20 {
799				compatible = "nxp,pca9506";
800				reg = <0x20>;
801				gpio-controller;
802				#gpio-cells = <2>;
803			};
804
805			gpio@21 {
806				compatible = "nxp,pca9506";
807				reg = <0x21>;
808				gpio-controller;
809				#gpio-cells = <2>;
810			};
811
812			gpio@22 {
813				compatible = "nxp,pca9506";
814				reg = <0x22>;
815				gpio-controller;
816				#gpio-cells = <2>;
817			};
818
819			gpio@23 {
820				compatible = "nxp,pca9506";
821				reg = <0x23>;
822				gpio-controller;
823				#gpio-cells = <2>;
824			};
825
826			gpio@24 {
827				compatible = "nxp,pca9506";
828				reg = <0x24>;
829				gpio-controller;
830				#gpio-cells = <2>;
831				gpio-line-names = "","","","",
832						  "NIC0_MAIN_PWR_EN",
833						  "NIC1_MAIN_PWR_EN",
834						  "NIC2_MAIN_PWR_EN",
835						  "NIC3_MAIN_PWR_EN",
836						  "","","","","","","","",
837						  "","","","","","","","",
838						  "","","","","","","","";
839			};
840		};
841
842		imux29: i2c@1 {
843			reg = <1>;
844			#address-cells = <1>;
845			#size-cells = <0>;
846		};
847	};
848};
849
850&i2c11 {
851	status = "okay";
852	power-sensor@10 {
853		compatible = "adi,adm1272";
854		reg = <0x10>;
855	};
856
857	power-sensor@12 {
858		compatible = "adi,adm1272";
859		reg = <0x12>;
860	};
861
862	gpio@20 {
863		compatible = "nxp,pca9555";
864		reg = <0x20>;
865		gpio-controller;
866		#gpio-cells = <2>;
867		interrupt-parent = <&gpio0>;
868		interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
869		gpio-line-names = "P48V_OCP_GPIO1", "P48V_OCP_GPIO2",
870				  "P48V_OCP_GPIO3", "FAN_BOARD_0_REVISION_0_R",
871				  "FAN_BOARD_0_REVISION_1_R",
872				  "FAN_BOARD_1_REVISION_0_R",
873				  "FAN_BOARD_1_REVISION_1_R", "RST_MUX_R_N",
874				  "RST_LED_CONTROL_FAN_BOARD_0_N",
875				  "RST_LED_CONTROL_FAN_BOARD_1_N",
876				  "RST_IOEXP_FAN_BOARD_0_N",
877				  "RST_IOEXP_FAN_BOARD_1_N",
878				  "PWRGD_LOAD_SWITCH_FAN_BOARD_0_R",
879				  "PWRGD_LOAD_SWITCH_FAN_BOARD_1_R",
880				  "", "";
881	};
882
883	gpio@21 {
884		compatible = "nxp,pca9555";
885		reg = <0x21>;
886		gpio-controller;
887		#gpio-cells = <2>;
888		interrupt-parent = <&gpio0>;
889		interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
890		gpio-line-names = "HSC_OCP_SLOT_ODD_GPIO1",
891				  "HSC_OCP_SLOT_ODD_GPIO2",
892				  "HSC_OCP_SLOT_ODD_GPIO3",
893				  "HSC_OCP_SLOT_EVEN_GPIO1",
894				  "HSC_OCP_SLOT_EVEN_GPIO2",
895				  "HSC_OCP_SLOT_EVEN_GPIO3",
896				  "ADC_TYPE_0_R", "ADC_TYPE_1_R",
897				  "MEDUSA_BOARD_REV_0", "MEDUSA_BOARD_REV_1",
898				  "MEDUSA_BOARD_REV_2", "MEDUSA_BOARD_TYPE",
899				  "DELTA_MODULE_TYPE", "P12V_HSC_TYPE",
900				  "", "";
901	};
902
903	gpio@22 {
904		compatible = "nxp,pca9555";
905		reg = <0x22>;
906		gpio-controller;
907		#gpio-cells = <2>;
908		interrupt-parent = <&gpio0>;
909		interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
910		gpio-line-names = "CARD_TYPE_SLOT1", "CARD_TYPE_SLOT2",
911				  "CARD_TYPE_SLOT3", "CARD_TYPE_SLOT4",
912				  "CARD_TYPE_SLOT5", "CARD_TYPE_SLOT6",
913				  "CARD_TYPE_SLOT7", "CARD_TYPE_SLOT8",
914				  "OC_P48V_HSC_0_N", "FLT_P48V_HSC_0_N",
915				  "OC_P48V_HSC_1_N", "FLT_P48V_HSC_1_N",
916				  "EN_P48V_AUX_0", "EN_P48V_AUX_1",
917				  "PWRGD_P12V_AUX_0", "PWRGD_P12V_AUX_1";
918	};
919
920	gpio@23 {
921		compatible = "nxp,pca9555";
922		reg = <0x23>;
923		gpio-controller;
924		#gpio-cells = <2>;
925		interrupt-parent = <&gpio0>;
926		interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
927		gpio-line-names = "HSC1_ALERT1_R_N", "HSC2_ALERT1_R_N",
928				  "HSC3_ALERT1_R_N", "HSC4_ALERT1_R_N",
929				  "HSC5_ALERT1_R_N", "HSC6_ALERT1_R_N",
930				  "HSC7_ALERT1_R_N", "HSC8_ALERT1_R_N",
931				  "HSC1_ALERT2_R_N", "HSC2_ALERT2_R_N",
932				  "HSC3_ALERT2_R_N", "HSC4_ALERT2_R_N",
933				  "HSC5_ALERT2_R_N", "HSC6_ALERT2_R_N",
934				  "HSC7_ALERT2_R_N", "HSC8_ALERT2_R_N";
935	};
936
937	temperature-sensor@48 {
938		compatible = "ti,tmp75";
939		reg = <0x48>;
940	};
941
942	temperature-sensor@49 {
943		compatible = "ti,tmp75";
944		reg = <0x49>;
945	};
946
947	eeprom@54 {
948		compatible = "atmel,24c128";
949		reg = <0x54>;
950	};
951};
952
953&i2c12 {
954	#address-cells = <1>;
955	#size-cells = <0>;
956	status = "okay";
957	bus-frequency = <400000>;
958
959	i2c-mux@70 {
960		compatible = "nxp,pca9544";
961		reg = <0x70>;
962		#address-cells = <1>;
963		#size-cells = <0>;
964		i2c-mux-idle-disconnect;
965
966		imux34: i2c@0 {
967			reg = <0>;
968			#address-cells = <1>;
969			#size-cells = <0>;
970
971			temperature-sensor@48 {
972				compatible = "ti,tmp75";
973				reg = <0x48>;
974			};
975
976			eeprom@50 {
977				compatible = "atmel,24c128";
978				reg = <0x50>;
979			};
980
981			eeprom@54 {
982				compatible = "atmel,24c64";
983				reg = <0x54>;
984			};
985
986			rtc@6f {
987				compatible = "nuvoton,nct3018y";
988				reg = <0x6f>;
989			};
990
991			gpio@20 {
992				compatible = "nxp,pca9506";
993				reg = <0x20>;
994				gpio-controller;
995				#gpio-cells = <2>;
996			};
997
998			gpio@21 {
999				compatible = "nxp,pca9506";
1000				reg = <0x21>;
1001				gpio-controller;
1002				#gpio-cells = <2>;
1003			};
1004
1005			gpio@22 {
1006				compatible = "nxp,pca9506";
1007				reg = <0x22>;
1008				gpio-controller;
1009				#gpio-cells = <2>;
1010			};
1011
1012			gpio@23 {
1013				compatible = "nxp,pca9506";
1014				reg = <0x23>;
1015				gpio-controller;
1016				#gpio-cells = <2>;
1017			};
1018		};
1019
1020		imux35: i2c@1 {
1021			reg = <1>;
1022			#address-cells = <1>;
1023			#size-cells = <0>;
1024		};
1025	};
1026};
1027
1028&i2c13 {
1029	status = "okay";
1030	bus-frequency = <100000>;
1031	multi-master;
1032
1033	ipmb@10 {
1034		compatible = "ipmb-dev";
1035		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
1036		i2c-protocol;
1037	};
1038};
1039
1040&i2c14 {
1041	#address-cells = <1>;
1042	#size-cells = <0>;
1043	status = "okay";
1044	bus-frequency = <400000>;
1045	adc@1d {
1046		compatible = "ti,adc128d818";
1047		reg = <0x1d>;
1048		ti,mode = /bits/ 8 <1>;
1049	};
1050
1051	adc@36 {
1052		compatible = "ti,adc128d818";
1053		reg = <0x36>;
1054		ti,mode = /bits/ 8 <1>;
1055	};
1056
1057	adc@37 {
1058		compatible = "ti,adc128d818";
1059		reg = <0x37>;
1060		ti,mode = /bits/ 8 <1>;
1061	};
1062
1063	power-sensor@40 {
1064		compatible = "ti,ina230";
1065		reg = <0x40>;
1066	};
1067
1068	power-sensor@41 {
1069		compatible = "ti,ina230";
1070		reg = <0x41>;
1071	};
1072
1073	power-sensor@42 {
1074		compatible = "ti,ina230";
1075		reg = <0x42>;
1076	};
1077
1078	power-sensor@43 {
1079		compatible = "ti,ina230";
1080		reg = <0x43>;
1081	};
1082
1083	power-sensor@44 {
1084		compatible = "ti,ina230";
1085		reg = <0x44>;
1086	};
1087
1088	temperature-sensor@4e {
1089		compatible = "ti,tmp75";
1090		reg = <0x4e>;
1091	};
1092
1093	temperature-sensor@4f {
1094		compatible = "ti,tmp75";
1095		reg = <0x4f>;
1096	};
1097
1098	eeprom@51 {
1099		compatible = "atmel,24c128";
1100		reg = <0x51>;
1101	};
1102
1103	i2c-mux@73 {
1104		compatible = "nxp,pca9544";
1105		reg = <0x73>;
1106		#address-cells = <1>;
1107		#size-cells = <0>;
1108		i2c-mux-idle-disconnect;
1109
1110		imux32: i2c@0 {
1111			reg = <0>;
1112			#address-cells = <1>;
1113			#size-cells = <0>;
1114			adc@35 {
1115				compatible = "maxim,max11617";
1116				reg = <0x35>;
1117			};
1118		};
1119
1120		imux33: i2c@1 {
1121			reg = <1>;
1122			#address-cells = <1>;
1123			#size-cells = <0>;
1124			adc@35 {
1125				compatible = "maxim,max11617";
1126				reg = <0x35>;
1127			};
1128		};
1129	};
1130
1131	i2c-mux@74 {
1132		compatible = "nxp,pca9546";
1133		reg = <0x74>;
1134		#address-cells = <1>;
1135		#size-cells = <0>;
1136		i2c-mux-idle-disconnect;
1137
1138		imux30: i2c@0 {
1139			reg = <0>;
1140			#address-cells = <1>;
1141			#size-cells = <0>;
1142
1143			adc@1f {
1144				compatible = "ti,adc128d818";
1145				reg = <0x1f>;
1146				ti,mode = /bits/ 8 <1>;
1147			};
1148
1149			pwm@20{
1150				compatible = "maxim,max31790";
1151				reg = <0x20>;
1152			};
1153
1154			gpio@22{
1155				compatible = "ti,tca6424";
1156				reg = <0x22>;
1157				gpio-controller;
1158				#gpio-cells = <2>;
1159			};
1160
1161			pwm@2f{
1162				compatible = "maxim,max31790";
1163				reg = <0x2f>;
1164			};
1165
1166			adc@33 {
1167				compatible = "maxim,max11615";
1168				reg = <0x33>;
1169			};
1170
1171			eeprom@52 {
1172				compatible = "atmel,24c128";
1173				reg = <0x52>;
1174			};
1175
1176			gpio@61 {
1177				compatible = "nxp,pca9552";
1178				reg = <0x61>;
1179				#address-cells = <1>;
1180				#size-cells = <0>;
1181				gpio-controller;
1182				#gpio-cells = <2>;
1183			};
1184		};
1185
1186		imux31: i2c@1 {
1187			reg = <1>;
1188			#address-cells = <1>;
1189			#size-cells = <0>;
1190
1191			adc@1f {
1192				compatible = "ti,adc128d818";
1193				reg = <0x1f>;
1194				ti,mode = /bits/ 8 <1>;
1195			};
1196
1197			pwm@20{
1198				compatible = "maxim,max31790";
1199				reg = <0x20>;
1200			};
1201
1202			gpio@22{
1203				compatible = "ti,tca6424";
1204				reg = <0x22>;
1205				gpio-controller;
1206				#gpio-cells = <2>;
1207			};
1208
1209			pwm@2f{
1210				compatible = "maxim,max31790";
1211				reg = <0x2f>;
1212			};
1213
1214			adc@33 {
1215				compatible = "maxim,max11615";
1216				reg = <0x33>;
1217			};
1218
1219			eeprom@52 {
1220				compatible = "atmel,24c128";
1221				reg = <0x52>;
1222			};
1223
1224			gpio@61 {
1225				compatible = "nxp,pca9552";
1226				reg = <0x61>;
1227				#address-cells = <1>;
1228				#size-cells = <0>;
1229				gpio-controller;
1230				#gpio-cells = <2>;
1231			};
1232		};
1233	};
1234};
1235
1236&i2c15 {
1237	#address-cells = <1>;
1238	#size-cells = <0>;
1239	status = "okay";
1240	multi-master;
1241	bus-frequency = <400000>;
1242
1243	mctp@10 {
1244		compatible = "mctp-i2c-controller";
1245		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
1246	};
1247
1248	i2c-mux@72 {
1249		compatible = "nxp,pca9544";
1250		reg = <0x72>;
1251		#address-cells = <1>;
1252		#size-cells = <0>;
1253
1254		imux24: i2c@0 {
1255			reg = <0>;
1256			#address-cells = <1>;
1257			#size-cells = <0>;
1258			mctp-controller;
1259			temperature-sensor@1f {
1260				compatible = "ti,tmp421";
1261				reg = <0x1f>;
1262			};
1263
1264			eeprom@50 {
1265				compatible = "atmel,24c64";
1266				reg = <0x50>;
1267			};
1268		};
1269
1270		imux25: i2c@1 {
1271			reg = <1>;
1272			#address-cells = <1>;
1273			#size-cells = <0>;
1274			mctp-controller;
1275			temperature-sensor@1f {
1276				compatible = "ti,tmp421";
1277				reg = <0x1f>;
1278			};
1279
1280			eeprom@50 {
1281				compatible = "atmel,24c64";
1282				reg = <0x50>;
1283			};
1284		};
1285
1286		imux26: i2c@2 {
1287			reg = <2>;
1288			#address-cells = <1>;
1289			#size-cells = <0>;
1290			mctp-controller;
1291			temperature-sensor@1f {
1292				compatible = "ti,tmp421";
1293				reg = <0x1f>;
1294			};
1295
1296			eeprom@50 {
1297				compatible = "atmel,24c64";
1298				reg = <0x50>;
1299			};
1300		};
1301
1302		imux27: i2c@3 {
1303			reg = <3>;
1304			#address-cells = <1>;
1305			#size-cells = <0>;
1306			mctp-controller;
1307			temperature-sensor@1f {
1308				compatible = "ti,tmp421";
1309				reg = <0x1f>;
1310			};
1311
1312			eeprom@50 {
1313				compatible = "atmel,24c64";
1314				reg = <0x50>;
1315			};
1316		};
1317	};
1318};
1319
1320&adc0 {
1321	status = "okay";
1322	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
1323			&pinctrl_adc2_default &pinctrl_adc3_default
1324			&pinctrl_adc4_default &pinctrl_adc5_default
1325			&pinctrl_adc6_default &pinctrl_adc7_default>;
1326};
1327
1328&adc1 {
1329	status = "okay";
1330	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
1331			&pinctrl_adc15_default>;
1332};
1333
1334&ehci0 {
1335	status = "okay";
1336};
1337
1338&ehci1 {
1339	status = "okay";
1340};
1341
1342&uhci {
1343	status = "okay";
1344};
1345