| /openbmc/u-boot/arch/powerpc/cpu/mpc85xx/ |
| H A D | cmd_errata.c | 126 puts("Work-around for Erratum A007212 enabled\n"); in check_erratum_a007212()
143 puts("Work-around for Erratum SATA A001 enabled\n"); in do_errata()
149 puts("Work-around for Erratum SERDES8 enabled\n"); in do_errata()
152 puts("Work-around for Erratum SERDES9 enabled\n"); in do_errata()
155 puts("Work-around for Erratum SERDES-A005 enabled\n"); in do_errata()
159 puts("Work-around for Erratum CPU22 enabled\n"); in do_errata()
168 puts("Work-around for Erratum CPU-A011 enabled\n"); in do_errata()
171 puts("Work-around for Erratum CPU-A003999 enabled\n"); in do_errata()
174 puts("Work-around for Erratum DDR-A003474 enabled\n"); in do_errata()
177 puts("Work-around for DDR MSYNC_IN Erratum enabled\n"); in do_errata()
[all …]
|
| H A D | cpu.c | 111 puts("Unicore software on multiprocessor system!!\n" in checkcpu()
117 puts("CPU: "); in checkcpu()
122 puts(cpu->name); in checkcpu()
124 puts("E"); in checkcpu()
137 puts("e500"); in checkcpu()
140 puts("e500mc"); in checkcpu()
143 puts("e5500"); in checkcpu()
146 puts("e6500"); in checkcpu()
149 puts("Unknown"); in checkcpu()
164 puts("Single Source Clock Configuration\n"); in checkcpu()
[all …]
|
| /openbmc/u-boot/drivers/ddr/fsl/ |
| H A D | util.c | 205 puts(" (DDR not enabled)\n"); in print_ddr_info()
209 puts(" (DDR"); in print_ddr_info()
213 puts("1"); in print_ddr_info()
216 puts("2"); in print_ddr_info()
219 puts("3"); in print_ddr_info()
222 puts("4"); in print_ddr_info()
225 puts("?"); in print_ddr_info()
230 puts(", 32-bit"); in print_ddr_info()
232 puts(", 16-bit"); in print_ddr_info()
234 puts(", 64-bit"); in print_ddr_info()
[all …]
|
| /openbmc/u-boot/cmd/ |
| H A D | pcmcia.c | 107 puts (indent); in print_funcid()
110 puts (" Multi-Function"); in print_funcid()
113 puts (" Memory"); in print_funcid()
116 puts (" Serial Port"); in print_funcid()
119 puts (" Parallel Port"); in print_funcid()
122 puts (" Fixed Disk"); in print_funcid()
125 puts (" Video Adapter"); in print_funcid()
128 puts (" Network Adapter"); in print_funcid()
131 puts (" AIMS Card"); in print_funcid()
134 puts (" SCSI Adapter"); in print_funcid()
[all …]
|
| H A D | i2c.c | 162 puts("No I2C bus selected\n"); in i2c_get_cur_bus()
594 puts (" "); in do_i2c_md()
598 puts ("."); in do_i2c_md()
968 puts ("Valid chip addresses:"); in do_i2c_probe()
997 puts ("Excluded chip addresses:"); in do_i2c_probe()
1115 puts ("25 ns\n"); in print_ddr2_tcyc()
1118 puts ("33 ns\n"); in print_ddr2_tcyc()
1121 puts ("66 ns\n"); in print_ddr2_tcyc()
1124 puts ("75 ns\n"); in print_ddr2_tcyc()
1127 puts ("?? ns\n"); in print_ddr2_tcyc()
[all …]
|
| H A D | source.c | 69 puts ("Bad magic number\n"); in source()
74 puts ("Bad header crc\n"); in source()
80 puts ("Bad data crc\n"); in source()
86 puts ("Bad image type\n"); in source()
94 puts ("Empty Script\n"); in source()
110 puts ("Bad FIT image format\n"); in source()
118 puts("No FIT subimage unit name\n"); in source()
130 puts ("Not a image image\n"); in source()
137 puts ("Bad Data Hash\n"); in source()
144 puts ("Could not find script subimage data\n"); in source()
[all …]
|
| /openbmc/qemu/pc-bios/s390-ccw/ |
| H A D | bootmap.c | 68 puts("No zIPL sig in BootInfo"); in verify_boot_info()
72 puts("Wrong zIPL version"); in verify_boot_info()
76 puts("DASD is not for IPL"); in verify_boot_info()
80 puts("DASD is not ECKD"); in verify_boot_info()
84 puts("Not for this arch"); in verify_boot_info()
88 puts("Bad block size in zIPL section of 1st record"); in verify_boot_info()
168 puts("BPRS read failed"); in load_eckd_segments()
189 puts("Bad chunk block size"); in load_eckd_segments()
199 puts("Bad chunk ECKD address"); in load_eckd_segments()
220 puts("BPRS continuation read failed"); in load_eckd_segments()
[all …]
|
| /openbmc/linux/arch/mips/boot/compressed/ |
| H A D | decompress.c | 34 extern void puts(const char *s);
37 #define puts(s) do {} while (0) macro
45 puts("\n\n"); in error()
46 puts(x); in error()
47 puts("\n\n -- System halted"); in error()
99 puts("zimage at: "); in decompress_kernel()
101 puts(" "); in decompress_kernel()
103 puts("\n"); in decompress_kernel()
110 puts("Uncompressing Linux at load address "); in decompress_kernel()
112 puts("\n"); in decompress_kernel()
[all …]
|
| /openbmc/u-boot/board/toradex/apalis_imx6/ |
| H A D | pf0100.c | 37 puts("PMIC: "); in pmic_init()
40 puts("i2c bus failed\n"); in pmic_init()
45 puts("i2c pmic devid read failed\n"); in pmic_init()
49 puts("i2c pmic revid read failed\n"); in pmic_init()
73 puts("i2c write failed\n"); in pmic_init()
90 puts("i2c write failed\n"); in pmic_init()
108 puts("i2c write failed\n"); in pmic_init()
112 puts("i2c fuse_por read failed\n"); in pmic_init()
119 puts("i2c fuse_por read failed\n"); in pmic_init()
126 puts("i2c fuse_por read failed\n"); in pmic_init()
[all …]
|
| H A D | do_fuse.c | 28 puts("BT_FUSE_SEL already fused, will do nothing\n"); in mfgr_fuse()
42 puts("Fusing...\n"); in do_mfgr_fuse()
45 puts("done.\n"); in do_mfgr_fuse()
47 puts("failed.\n"); in do_mfgr_fuse()
66 puts("Fast boot mode already fused, no need to fuse\n"); in do_updt_fuse()
70 puts("Warning: Programming fuses is an irreversible operation!\n" in do_updt_fuse()
77 puts("Fusing fast boot mode...\n"); in do_updt_fuse()
80 puts("done.\n"); in do_updt_fuse()
82 puts("failed.\n"); in do_updt_fuse()
|
| /openbmc/u-boot/arch/arm/mach-uniphier/ |
| H A D | cpu-info.c | 23 puts("SoC: "); in print_cpuinfo()
27 puts("LD4"); in print_cpuinfo()
31 puts("Pro4"); in print_cpuinfo()
34 puts("sLD8"); in print_cpuinfo()
37 puts("Pro5"); in print_cpuinfo()
40 puts("PXs2"); in print_cpuinfo()
43 puts("LD6b"); in print_cpuinfo()
46 puts("LD11"); in print_cpuinfo()
49 puts("LD20"); in print_cpuinfo()
52 puts("PXs3"); in print_cpuinfo()
|
| /openbmc/u-boot/board/freescale/ls1012ardb/ |
| H A D | ls1012ardb.c | 36 puts("Board: LS1012ARDB "); in checkboard()
46 puts("Version"); in checkboard()
49 puts(": RevA"); in checkboard()
52 puts(": RevB"); in checkboard()
55 puts(": RevC"); in checkboard()
58 puts(": RevC1"); in checkboard()
61 puts(": RevC2"); in checkboard()
64 puts(": RevD"); in checkboard()
67 puts(": RevE"); in checkboard()
70 puts(": unknown"); in checkboard()
[all …]
|
| /openbmc/u-boot/board/toradex/colibri_imx6/ |
| H A D | pf0100.c | 36 puts("PMIC: "); in pmic_init()
39 puts("i2c bus failed\n"); in pmic_init()
44 puts("i2c pmic devid read failed\n"); in pmic_init()
48 puts("i2c pmic revid read failed\n"); in pmic_init()
72 puts("i2c write failed\n"); in pmic_init()
89 puts("i2c write failed\n"); in pmic_init()
107 puts("i2c write failed\n"); in pmic_init()
111 puts("i2c fuse_por read failed\n"); in pmic_init()
118 puts("i2c fuse_por read failed\n"); in pmic_init()
125 puts("i2c fuse_por read failed\n"); in pmic_init()
[all …]
|
| H A D | do_fuse.c | 28 puts("BT_FUSE_SEL already fused, will do nothing\n"); in mfgr_fuse()
42 puts("Fusing...\n"); in do_mfgr_fuse()
45 puts("done.\n"); in do_mfgr_fuse()
47 puts("failed.\n"); in do_mfgr_fuse()
66 puts("Fast boot mode already fused, no need to fuse\n"); in do_updt_fuse()
70 puts("Warning: Programming fuses is an irreversible operation!\n" in do_updt_fuse()
77 puts("Fusing fast boot mode...\n"); in do_updt_fuse()
80 puts("done.\n"); in do_updt_fuse()
82 puts("failed.\n"); in do_updt_fuse()
|
| /openbmc/u-boot/arch/microblaze/cpu/ |
| H A D | exception.c | 25 puts("Unaligned data access exception\n"); in _hw_exception_handler()
28 puts("Illegal op-code exception\n"); in _hw_exception_handler()
31 puts("Instruction bus error exception\n"); in _hw_exception_handler()
34 puts("Data bus error exception\n"); in _hw_exception_handler()
37 puts("Divide by zero exception\n"); in _hw_exception_handler()
41 puts("Priviledged or stack protection violation exception\n"); in _hw_exception_handler()
44 puts("Exception in delay slot\n"); in _hw_exception_handler()
48 puts("Undefined cause\n"); in _hw_exception_handler()
60 puts("User vector_exception\n"); in _exception_handler()
|
| /openbmc/linux/tools/testing/selftests/riscv/vector/ |
| H A D | vstate_exec_nolibc.c | 15 puts("PR_RISCV_V_GET_CONTROL is not supported\n"); in main()
22 puts("fork failed\n"); in main()
35 puts("child execve failed\n"); in main()
43 puts("fork failed\n"); in main()
50 puts("child's vstate_ctrl not equal to parent's\n"); in main()
65 puts("child exited abnormally\n"); in main()
71 puts("child was terminated by unexpected signal\n"); in main()
76 puts("child signaled by illegal V access but vstate_ctrl is not off\n"); in main()
88 puts("parent has inherit bit, but child has not\n"); in main()
95 puts("parent's next setting does not equal to child's\n"); in main()
[all …]
|
| /openbmc/u-boot/lib/efi/ |
| H A D | efi_stub.c | 79 void puts(const char *str) in puts() function
194 puts("\ngdt: "); in get_codeseg32()
196 puts(", addr: "); in get_codeseg32()
202 puts("\n"); in get_codeseg32()
204 puts(": "); in get_codeseg32()
206 puts(" "); in get_codeseg32()
209 puts("\n "); in get_codeseg32()
210 puts("32-bit code segment: "); in get_codeseg32()
212 puts("\n "); in get_codeseg32()
214 puts("page_table: "); in get_codeseg32()
[all …]
|
| /openbmc/u-boot/arch/arm/mach-sunxi/ |
| H A D | cpu_info.c | 58 puts("CPU: Allwinner A10 (SUN4I)\n"); in print_cpuinfo()
62 case 0: puts("CPU: Allwinner A12 (SUN5I)\n"); break; in print_cpuinfo()
63 case 3: puts("CPU: Allwinner A13 (SUN5I)\n"); break; in print_cpuinfo()
64 case 7: puts("CPU: Allwinner A10s (SUN5I)\n"); break; in print_cpuinfo()
65 default: puts("CPU: Allwinner A1X (SUN5I)\n"); in print_cpuinfo()
70 puts("CPU: Allwinner A31 (SUN6I)\n"); in print_cpuinfo()
73 puts("CPU: Allwinner A31s (SUN6I)\n"); in print_cpuinfo()
80 puts("CPU: Allwinner A20 (SUN7I)\n"); in print_cpuinfo()
94 puts("CPU: Allwinner A80 (SUN9I)\n"); in print_cpuinfo()
96 puts("CPU: Allwinner A64 (SUN50I)\n"); in print_cpuinfo()
[all …]
|
| /openbmc/u-boot/arch/powerpc/cpu/mpc86xx/ |
| H A D | cpu.c | 48 puts("Unicore software on multiprocessor system!!\n" in checkcpu()
52 puts("CPU: "); in checkcpu()
56 puts(cpu->name); in checkcpu()
59 puts("Core: "); in checkcpu()
67 puts("\n Core1Translation Enabled"); in checkcpu()
74 puts("Clock Configuration:\n"); in checkcpu()
88 puts("L1: D-cache 32 KiB enabled\n"); in checkcpu()
89 puts(" I-cache 32 KiB enabled\n"); in checkcpu()
91 puts("L2: "); in checkcpu()
94 puts("256"); in checkcpu()
[all …]
|
| /openbmc/u-boot/examples/standalone/ |
| H A D | atmel_df_pow2.c | 91 puts("\n"); in getline()
101 puts("\b \b"); in getline()
134 puts("\nenter the [BUS:]CS of the SPI flash: "); in atmel_df_pow2()
150 puts("invalid format, please try again\n"); in atmel_df_pow2()
163 puts("unable to setup slave\n"); in atmel_df_pow2()
173 puts("no flash found\n"); in atmel_df_pow2()
179 puts("unable to read status register\n"); in atmel_df_pow2()
183 puts("flash is already in power-of-2 mode!\n"); in atmel_df_pow2()
187 puts("are you sure you wish to set power-of-2 mode?\n"); in atmel_df_pow2()
188 puts("this operation is permanent and irreversible\n"); in atmel_df_pow2()
[all …]
|
| /openbmc/u-boot/arch/arm/mach-keystone/ |
| H A D | init.c | 219 puts("CPU: "); in print_cpuinfo()
222 puts("66AK2Hx SR"); in print_cpuinfo()
225 puts("66AK2Lx SR"); in print_cpuinfo()
228 puts("66AK2Ex SR"); in print_cpuinfo()
231 puts("66AK2Gx"); in print_cpuinfo()
236 puts("-100 "); in print_cpuinfo()
238 puts("-60 "); in print_cpuinfo()
240 puts("-xx "); in print_cpuinfo()
243 puts("SR"); in print_cpuinfo()
246 puts("Unknown\n"); in print_cpuinfo()
[all …]
|
| /openbmc/u-boot/board/CZ.NIC/turris_omnia/ |
| H A D | turris_omnia.c | 96 puts("SERDES0 card detect: "); in omnia_detect_sata()
99 puts("Cannot find MCU bus!\n"); in omnia_detect_sata()
105 puts("Cannot get MCU chip!\n"); in omnia_detect_sata()
116 puts("I2C read failed! Default PEX\n"); in omnia_detect_sata()
121 puts("NONE\n"); in omnia_detect_sata()
126 puts("SATA\n"); in omnia_detect_sata()
129 puts("PEX\n"); in omnia_detect_sata()
160 puts("Cannot find EEPROM bus\n"); in omnia_read_eeprom()
166 puts("Cannot get EEPROM chip\n"); in omnia_read_eeprom()
176 puts("I2C EEPROM missing magic number!\n"); in omnia_read_eeprom()
[all …]
|
| /openbmc/linux/tools/testing/selftests/arm64/fp/ |
| H A D | fp-pidbench.S | 28 puts "\n"
34 puts "Iterations per test: "
39 puts "\n"
42 puts "No SVE: "
49 puts "System does not support SVE\n"
54 puts "SVE VL: "
57 puts "\n"
59 puts "SVE used once: "
63 puts "SVE used per syscall: "
|
| /openbmc/u-boot/board/freescale/common/ |
| H A D | diu_ch7301.c | 57 puts("I2C: failed to select proper dvi test pattern\n"); in diu_set_dvi_encoder()
64 puts("I2C: failed to select dvi input data format\n"); in diu_set_dvi_encoder()
73 puts("I2C: failed to select dvi syc polarity\n"); in diu_set_dvi_encoder()
83 puts("I2C: failed to select dvi pll charge_cntl\n"); in diu_set_dvi_encoder()
90 puts("I2C: failed to select dvi pll divider\n"); in diu_set_dvi_encoder()
97 puts("I2C: failed to select dvi pll filter\n"); in diu_set_dvi_encoder()
105 puts("I2C: failed to select dvi pll charge_cntl\n"); in diu_set_dvi_encoder()
112 puts("I2C: failed to select dvi pll divider\n"); in diu_set_dvi_encoder()
119 puts("I2C: failed to select dvi pll filter\n"); in diu_set_dvi_encoder()
128 puts("I2C: failed to select dvi power mgmt\n"); in diu_set_dvi_encoder()
|
| /openbmc/u-boot/board/freescale/ls2080ardb/ |
| H A D | ls2080ardb.c | 79 puts("boot from QSPI DEV#0\n"); in checkboard()
80 puts("QSPI_CSA_1 mapped to QSPI DEV#1\n"); in checkboard()
83 puts("boot from QSPI DEV#1\n"); in checkboard()
84 puts("QSPI_CSA_1 mapped to QSPI DEV#0\n"); in checkboard()
87 puts("boot from QSPI EMU\n"); in checkboard()
88 puts("QSPI_CSA_1 mapped to QSPI DEV#0\n"); in checkboard()
91 puts("boot from QSPI EMU\n"); in checkboard()
92 puts("QSPI_CSA_1 mapped to QSPI DEV#1\n"); in checkboard()
95 puts("boot from QSPI DEV#0\n"); in checkboard()
96 puts("QSPI_CSA_1 mapped to QSPI EMU\n"); in checkboard()
[all …]
|