| /openbmc/linux/drivers/iio/adc/ |
| H A D | ti-ads7924.c | 361 return dev_err_probe(dev, -ENOMEM, in ads7924_probe()
371 return dev_err_probe(dev, PTR_ERR(data->reset_gpio), in ads7924_probe()
385 return dev_err_probe(dev, ret, in ads7924_probe()
390 return dev_err_probe(dev, PTR_ERR(data->regmap), in ads7924_probe()
395 return dev_err_probe(dev, PTR_ERR(data->vref_reg), in ads7924_probe()
400 return dev_err_probe(dev, ret, in ads7924_probe()
405 return dev_err_probe(dev, ret, in ads7924_probe()
410 return dev_err_probe(dev, ret, in ads7924_probe()
415 return dev_err_probe(dev, ret, in ads7924_probe()
420 return dev_err_probe(dev, ret, in ads7924_probe()
[all …]
|
| H A D | sun20i-gpadc-iio.c | 162 return dev_err_probe(dev, -ENODEV, "no channel children\n"); in sun20i_gpadc_alloc_channels()
174 return dev_err_probe(dev, ret, "invalid channel number\n"); in sun20i_gpadc_alloc_channels()
225 return dev_err_probe(dev, PTR_ERR(clk), "failed to enable bus clock\n"); in sun20i_gpadc_probe()
229 return dev_err_probe(dev, PTR_ERR(rst), "failed to get reset control\n"); in sun20i_gpadc_probe()
233 return dev_err_probe(dev, ret, "failed to deassert reset\n"); in sun20i_gpadc_probe()
246 return dev_err_probe(dev, ret, "failed requesting irq %d\n", irq); in sun20i_gpadc_probe()
254 return dev_err_probe(dev, ret, "could not register the device\n"); in sun20i_gpadc_probe()
|
| /openbmc/linux/drivers/phy/mediatek/ |
| H A D | phy-mtk-pcie.c | 144 return dev_err_probe(dev, ret, "Failed to read %s\n", efuse_id); in mtk_pcie_efuse_read_for_lane()
149 return dev_err_probe(dev, ret, "Failed to read %s\n", efuse_id); in mtk_pcie_efuse_read_for_lane()
154 return dev_err_probe(dev, ret, "Failed to read %s\n", efuse_id); in mtk_pcie_efuse_read_for_lane()
157 return dev_err_probe(dev, -EINVAL, in mtk_pcie_efuse_read_for_lane()
180 return dev_err_probe(dev, ret, "Failed to read glb_intr\n"); in mtk_pcie_read_efuse()
211 return dev_err_probe(dev, PTR_ERR(pcie_phy->sif_base), in mtk_pcie_phy_probe()
216 return dev_err_probe(dev, PTR_ERR(pcie_phy->phy), in mtk_pcie_phy_probe()
222 return dev_err_probe(dev, -EINVAL, "Failed to get phy data\n"); in mtk_pcie_phy_probe()
238 return dev_err_probe(dev, PTR_ERR(provider), in mtk_pcie_phy_probe()
|
| H A D | phy-mtk-hdmi.c | 103 return dev_err_probe(dev, PTR_ERR(ref_clk), in mtk_hdmi_phy_probe()
111 return dev_err_probe(dev, ret, "Failed to read clock-output-names\n"); in mtk_hdmi_phy_probe()
120 return dev_err_probe(dev, PTR_ERR(hdmi_phy->pll), in mtk_hdmi_phy_probe()
126 return dev_err_probe(dev, ret, "Failed to get ibias\n"); in mtk_hdmi_phy_probe()
131 return dev_err_probe(dev, ret, "Failed to get ibias_up\n"); in mtk_hdmi_phy_probe()
141 return dev_err_probe(dev, PTR_ERR(phy), "Cannot create HDMI PHY\n"); in mtk_hdmi_phy_probe()
147 return dev_err_probe(dev, PTR_ERR(phy_provider), in mtk_hdmi_phy_probe()
|
| /openbmc/linux/drivers/tty/serial/8250/ |
| H A D | 8250_dfl.c | 61 return dev_err_probe(dev, ret, "missing CLK_FRQ param\n"); in dfl_uart_get_params()
67 return dev_err_probe(dev, ret, "missing FIFO_LEN param\n"); in dfl_uart_get_params()
83 return dev_err_probe(dev, -EINVAL, "unsupported FIFO_LEN %llu\n", fifo_len); in dfl_uart_get_params()
88 return dev_err_probe(dev, ret, "missing REG_LAYOUT param\n"); in dfl_uart_get_params()
102 return dev_err_probe(dev, -EINVAL, "unsupported reg-width %u\n", reg_width); in dfl_uart_get_params()
122 return dev_err_probe(dev, ret, "failed uart feature walk\n"); in dfl_uart_probe()
133 return dev_err_probe(dev, dfluart->line, "unable to register 8250 port.\n"); in dfl_uart_probe()
|
| /openbmc/linux/drivers/bus/ |
| H A D | qcom-ssc-block-bus.c | 273 return dev_err_probe(&pdev->dev, ret, "error when attaching power domains\n"); in qcom_ssc_block_bus_probe()
277 return dev_err_probe(&pdev->dev, ret, "error when enabling power domains\n"); in qcom_ssc_block_bus_probe()
283 return dev_err_probe(&pdev->dev, PTR_ERR(data->reg_mpm_sscaon_config0), in qcom_ssc_block_bus_probe()
289 return dev_err_probe(&pdev->dev, PTR_ERR(data->reg_mpm_sscaon_config1), in qcom_ssc_block_bus_probe()
295 return dev_err_probe(&pdev->dev, PTR_ERR(data->ssc_bcr), in qcom_ssc_block_bus_probe()
300 return dev_err_probe(&pdev->dev, PTR_ERR(data->ssc_reset), in qcom_ssc_block_bus_probe()
306 return dev_err_probe(&pdev->dev, PTR_ERR(data->xo_clk), in qcom_ssc_block_bus_probe()
311 return dev_err_probe(&pdev->dev, PTR_ERR(data->aggre2_clk), in qcom_ssc_block_bus_probe()
316 return dev_err_probe(&pdev->dev, PTR_ERR(data->gcc_im_sleep_clk), in qcom_ssc_block_bus_probe()
321 return dev_err_probe(&pdev->dev, PTR_ERR(data->aggre2_north_clk), in qcom_ssc_block_bus_probe()
[all …]
|
| /openbmc/linux/drivers/net/ethernet/stmicro/stmmac/ |
| H A D | dwmac-starfive.c | 92 return dev_err_probe(dwmac->dev, PTR_ERR(regmap), "getting the regmap failed\n"); in starfive_dwmac_set_mode()
99 return dev_err_probe(dwmac->dev, err, "error setting phy mode\n"); in starfive_dwmac_set_mode()
105 return dev_err_probe(dwmac->dev, err, in starfive_dwmac_set_mode()
122 return dev_err_probe(&pdev->dev, err, in starfive_dwmac_probe()
127 return dev_err_probe(&pdev->dev, PTR_ERR(plat_dat), in starfive_dwmac_probe()
138 return dev_err_probe(&pdev->dev, PTR_ERR(dwmac->clk_tx), in starfive_dwmac_probe()
143 return dev_err_probe(&pdev->dev, PTR_ERR(clk_gtx), in starfive_dwmac_probe()
|
| /openbmc/linux/drivers/iio/pressure/ |
| H A D | mprls0025pa.c | 329 return dev_err_probe(dev, -EOPNOTSUPP, in mpr_probe()
334 return dev_err_probe(dev, -ENOMEM, "couldn't get iio_dev\n"); in mpr_probe()
351 return dev_err_probe(dev, ret, in mpr_probe()
358 return dev_err_probe(dev, ret, in mpr_probe()
363 return dev_err_probe(dev, ret, in mpr_probe()
368 return dev_err_probe(dev, ret, in mpr_probe()
372 return dev_err_probe(dev, -EINVAL, in mpr_probe()
402 return dev_err_probe(dev, ret, in mpr_probe()
409 return dev_err_probe(dev, PTR_ERR(data->gpiod_reset), in mpr_probe()
417 return dev_err_probe(dev, ret, in mpr_probe()
[all …]
|
| /openbmc/linux/drivers/gpu/drm/imx/lcdc/ |
| H A D | imx-lcdc.c | 401 return dev_err_probe(dev, PTR_ERR(lcdc->base), "Cannot get IO memory\n"); in imx_lcdc_probe()
405 return dev_err_probe(dev, PTR_ERR(bridge), "Failed to find bridge\n"); in imx_lcdc_probe()
410 return dev_err_probe(dev, PTR_ERR(lcdc->clk_ipg), "Failed to get %s clk\n", "ipg"); in imx_lcdc_probe()
414 return dev_err_probe(dev, PTR_ERR(lcdc->clk_ahb), "Failed to get %s clk\n", "ahb"); in imx_lcdc_probe()
418 return dev_err_probe(dev, PTR_ERR(lcdc->clk_per), "Failed to get %s clk\n", "per"); in imx_lcdc_probe()
422 return dev_err_probe(dev, ret, "Cannot set DMA Mask\n"); in imx_lcdc_probe()
427 return dev_err_probe(dev, ret, "Cannot initialize mode configuration structure\n"); in imx_lcdc_probe()
435 return dev_err_probe(drm->dev, ret, "Cannot setup simple display pipe\n"); in imx_lcdc_probe()
439 return dev_err_probe(drm->dev, ret, "Failed to initialize vblank\n"); in imx_lcdc_probe()
443 return dev_err_probe(drm->dev, ret, "Cannot attach bridge\n"); in imx_lcdc_probe()
[all …]
|
| /openbmc/linux/drivers/hwmon/pmbus/ |
| H A D | ltc4286.c | 78 return dev_err_probe(&client->dev, ret, in ltc4286_probe()
88 return dev_err_probe(&client->dev, -ENODEV, in ltc4286_probe()
94 return dev_err_probe(&client->dev, ret, in ltc4286_probe()
103 return dev_err_probe(&client->dev, -ENODEV, in ltc4286_probe()
125 return dev_err_probe(&client->dev, vrange_oval, in ltc4286_probe()
147 return dev_err_probe(&client->dev, ret, in ltc4286_probe()
|
| /openbmc/linux/drivers/pwm/ |
| H A D | pwm-xilinx.c | 227 return dev_err_probe(dev, ret, "could not read #pwm-cells\n"); in xilinx_pwm_probe()
242 return dev_err_probe(dev, PTR_ERR(priv->map), in xilinx_pwm_probe()
247 return dev_err_probe(dev, ret, in xilinx_pwm_probe()
251 return dev_err_probe(dev, -EINVAL, in xilinx_pwm_probe()
258 return dev_err_probe(dev, ret, in xilinx_pwm_probe()
262 return dev_err_probe(dev, -EINVAL, in xilinx_pwm_probe()
274 return dev_err_probe(dev, PTR_ERR(priv->clk), in xilinx_pwm_probe()
279 return dev_err_probe(dev, ret, "Clock enable failed\n"); in xilinx_pwm_probe()
289 return dev_err_probe(dev, ret, "Could not register PWM chip\n"); in xilinx_pwm_probe()
|
| H A D | pwm-intel-lgm.c | 187 return dev_err_probe(dev, PTR_ERR(pc->regmap), in lgm_pwm_probe()
192 return dev_err_probe(dev, PTR_ERR(clk), "failed to get clock\n"); in lgm_pwm_probe()
196 return dev_err_probe(dev, ret, "failed to enable clock\n"); in lgm_pwm_probe()
200 return dev_err_probe(dev, PTR_ERR(rst), in lgm_pwm_probe()
205 return dev_err_probe(dev, ret, "cannot deassert reset control\n"); in lgm_pwm_probe()
215 return dev_err_probe(dev, ret, "failed to add PWM chip\n"); in lgm_pwm_probe()
|
| /openbmc/linux/drivers/iio/accel/ |
| H A D | msa311.c | 984 return dev_err_probe(dev, err, "failed to read partid\n"); in msa311_check_partid()
993 return dev_err_probe(dev, -ENOMEM, "can't alloc chip name\n"); in msa311_check_partid()
1007 return dev_err_probe(dev, err, "can't soft reset all logic\n"); in msa311_soft_reset()
1020 return dev_err_probe(dev, err, "failed to setup accel range\n"); in msa311_chip_init()
1026 return dev_err_probe(dev, err, in msa311_chip_init()
1033 return dev_err_probe(dev, err, in msa311_chip_init()
1042 return dev_err_probe(dev, err, "can't enable all axes\n"); in msa311_chip_init()
1046 return dev_err_probe(dev, err, in msa311_chip_init()
1068 return dev_err_probe(dev, err, "failed to request IRQ\n"); in msa311_setup_interrupts()
1072 return dev_err_probe(dev, -ENOMEM, in msa311_setup_interrupts()
[all …]
|
| /openbmc/linux/drivers/mfd/ |
| H A D | max77714.c | 88 return dev_err_probe(dev, err, "Failed to configure the external oscillator\n"); in max77714_setup_xosc()
92 return dev_err_probe(dev, err, "Failed to read external oscillator status\n"); in max77714_setup_xosc()
113 return dev_err_probe(dev, PTR_ERR(regmap), in max77714_probe()
124 return dev_err_probe(dev, err, "Failed to add PMIC IRQ chip\n"); in max77714_probe()
130 return dev_err_probe(dev, err, "Failed to register child devices\n"); in max77714_probe()
|
| /openbmc/linux/drivers/misc/ |
| H A D | tps6594-esm.c | 50 return dev_err_probe(dev, ret, in tps6594_esm_probe()
53 return dev_err_probe(dev, -ENODEV, in tps6594_esm_probe()
65 return dev_err_probe(dev, ret, "Failed to request irq\n"); in tps6594_esm_probe()
71 return dev_err_probe(dev, ret, "Failed to configure ESM\n"); in tps6594_esm_probe()
76 return dev_err_probe(dev, ret, "Failed to start ESM\n"); in tps6594_esm_probe()
|
| /openbmc/linux/drivers/platform/x86/ |
| H A D | lenovo-yogabook.c | 203 return dev_err_probe(dev, PTR_ERR(data->pen_led), "Getting pen icon LED\n"); in yogabook_probe()
211 return dev_err_probe(dev, PTR_ERR(data->backside_hall_gpio), in yogabook_probe()
216 return dev_err_probe(dev, r, "Getting backside_hall_sw IRQ\n"); in yogabook_probe()
227 return dev_err_probe(dev, r, "Requesting backside_hall_sw IRQ\n"); in yogabook_probe()
238 dev_err_probe(dev, r, "Registering backlight LED device\n"); in yogabook_probe()
346 return dev_err_probe(dev, -ENODEV, "Cannot find the touchpad device in ACPI tables\n"); in yogabook_wmi_probe()
350 r = dev_err_probe(dev, -ENODEV, "Cannot find the digitizer device in ACPI tables\n"); in yogabook_wmi_probe()
477 r = dev_err_probe(dev, PTR_ERR(data->pen_touch_event), in yogabook_pdev_probe()
483 r = dev_err_probe(dev, PTR_ERR(data->kbd_bl_led_enable), in yogabook_pdev_probe()
490 r = dev_err_probe(dev, PTR_ERR(data->kbd_bl_pwm), in yogabook_pdev_probe()
[all …]
|
| /openbmc/linux/drivers/hwmon/ |
| H A D | sfctemp.c | 274 return dev_err_probe(dev, PTR_ERR(sfctemp->clk_sense), in sfctemp_probe()
279 return dev_err_probe(dev, PTR_ERR(sfctemp->clk_bus), in sfctemp_probe()
284 return dev_err_probe(dev, PTR_ERR(sfctemp->rst_sense), in sfctemp_probe()
289 return dev_err_probe(dev, PTR_ERR(sfctemp->rst_bus), in sfctemp_probe()
294 return dev_err_probe(dev, ret, "error asserting sense reset\n"); in sfctemp_probe()
298 return dev_err_probe(dev, ret, "error asserting bus reset\n"); in sfctemp_probe()
306 return dev_err_probe(dev, ret, "error enabling temperature sensor\n"); in sfctemp_probe()
|
| /openbmc/linux/drivers/staging/media/tegra-video/ |
| H A D | vip.c | 60 return dev_err_probe(vip->dev, err, "failed to get runtime PM\n"); in tegra_vip_enable_stream()
128 dev_err_probe(dev, err, "%pOF: error getting endpoint node\n", np); in tegra_vip_channel_of_parse()
136 dev_err_probe(dev, err, "%pOF: failed to parse v4l2 endpoint\n", np); in tegra_vip_channel_of_parse()
143 dev_err_probe(dev, err, "%pOF: need 2 pads, got %d\n", np, num_pads); in tegra_vip_channel_of_parse()
175 return dev_err_probe(vip->dev, err, "failed to initialize media entity\n"); in tegra_vip_channel_init()
179 dev_err_probe(vip->dev, err, "failed to register subdev\n"); in tegra_vip_channel_init()
250 return dev_err_probe(&pdev->dev, err, "failed to register host1x client\n"); in tegra_vip_probe()
|
| /openbmc/linux/drivers/usb/dwc3/ |
| H A D | dwc3-xilinx.c | 83 dev_err_probe(dev, ret, "failed to assert Reset\n"); in dwc3_xlnx_init_versal()
90 dev_err_probe(dev, ret, "failed to De-assert Reset\n"); in dwc3_xlnx_init_versal()
110 dev_err_probe(dev, ret, in dwc3_xlnx_init_zynqmp()
133 dev_err_probe(dev, ret, in dwc3_xlnx_init_zynqmp()
141 dev_err_probe(dev, ret, in dwc3_xlnx_init_zynqmp()
149 dev_err_probe(dev, ret, in dwc3_xlnx_init_zynqmp()
212 return dev_err_probe(dev, PTR_ERR(reset_gpio), in dwc3_xlnx_init_zynqmp()
268 dev_err_probe(dev, ret, "failed to map registers\n"); in dwc3_xlnx_probe()
|
| /openbmc/linux/drivers/power/supply/ |
| H A D | rt9467-charger.c | 1026 return dev_err_probe(dev, -EINVAL, "Failed to get (%s) irq\n", in rt9467_request_interrupt()
1032 return dev_err_probe(dev, ret, "Failed to request (%s) irq\n", in rt9467_request_interrupt()
1046 return dev_err_probe(dev, ret, "Failed to reset ADC\n"); in rt9467_do_charger_init()
1053 return dev_err_probe(dev, ret, "Failed to init ichg/ieoc value\n"); in rt9467_do_charger_init()
1058 return dev_err_probe(dev, ret, "Failed to make statc unmask\n"); in rt9467_do_charger_init()
1064 return dev_err_probe(dev, ret, "Failed to set iinlmtsel to AICR\n"); in rt9467_do_charger_init()
1072 return dev_err_probe(dev, ret, "Failed to disable hardware ILIM\n"); in rt9467_do_charger_init()
1077 return dev_err_probe(dev, ret, "Failed to set higher inductor OCP level\n"); in rt9467_do_charger_init()
1082 return dev_err_probe(dev, ret, "Failed to set TE=1\n"); in rt9467_do_charger_init()
1087 return dev_err_probe(dev, ret, "Failed to set WT_FC\n"); in rt9467_do_charger_init()
[all …]
|
| /openbmc/linux/drivers/siox/ |
| H A D | siox-bus-gpio.c | 105 ret = dev_err_probe(dev, PTR_ERR(ddata->din), in siox_gpio_probe()
112 ret = dev_err_probe(dev, PTR_ERR(ddata->dout), in siox_gpio_probe()
119 ret = dev_err_probe(dev, PTR_ERR(ddata->dclk), in siox_gpio_probe()
126 ret = dev_err_probe(dev, PTR_ERR(ddata->dld), in siox_gpio_probe()
137 dev_err_probe(dev, ret, in siox_gpio_probe()
|
| /openbmc/linux/drivers/media/i2c/ |
| H A D | ds90ub913.c | 634 return dev_err_probe(dev, PTR_ERR(priv->clkout_clk_hw), in ub913_register_clkout()
640 return dev_err_probe(dev, ret, in ub913_register_clkout()
703 return dev_err_probe(dev, -ENOENT, "No sink endpoint\n"); in ub913_parse_dt()
710 return dev_err_probe(dev, ret, in ub913_parse_dt()
718 return dev_err_probe(dev, -EINVAL, in ub913_parse_dt()
737 return dev_err_probe(dev, -ENODEV, in ub913_hw_init()
748 return dev_err_probe(dev, ret, "i2c master init failed\n"); in ub913_hw_init()
776 return dev_err_probe(dev, ret, "Failed to init pads\n"); in ub913_subdev_init()
784 dev_err_probe(dev, ret, in ub913_subdev_init()
791 dev_err_probe(dev, ret, "v4l2_async_register_subdev error\n"); in ub913_subdev_init()
[all …]
|
| /openbmc/linux/drivers/clk/ |
| H A D | clk-npcm8xx.c | 315 return dev_err_probe(dev, PTR_ERR(hw), "Can't register pll\n"); in npcm8xx_clk_probe()
322 return dev_err_probe(dev, PTR_ERR(hw), "Can't register fixed div\n"); in npcm8xx_clk_probe()
327 return dev_err_probe(dev, PTR_ERR(hw), "Can't register pll2 div2\n"); in npcm8xx_clk_probe()
332 return dev_err_probe(dev, PTR_ERR(hw), "Can't register gfx div2\n"); in npcm8xx_clk_probe()
351 return dev_err_probe(dev, PTR_ERR(hw), "Can't register mux\n"); in npcm8xx_clk_probe()
357 return dev_err_probe(dev, PTR_ERR(hw), "Can't register pre clk div2\n"); in npcm8xx_clk_probe()
362 return dev_err_probe(dev, PTR_ERR(hw), "Can't register axi div2\n"); in npcm8xx_clk_probe()
367 return dev_err_probe(dev, PTR_ERR(hw), "Can't register atb div2\n"); in npcm8xx_clk_probe()
383 return dev_err_probe(dev, PTR_ERR(hw), "Can't register pre div\n"); in npcm8xx_clk_probe()
403 return dev_err_probe(dev, PTR_ERR(hw), "Can't register div\n"); in npcm8xx_clk_probe()
|
| /openbmc/linux/drivers/watchdog/ |
| H A D | keembay_wdt.c | 205 return dev_err_probe(dev, PTR_ERR(wdt->clk), "Failed to get clock\n"); in keembay_wdt_probe()
209 return dev_err_probe(dev, -EINVAL, "Failed to get clock rate\n"); in keembay_wdt_probe()
213 return dev_err_probe(dev, wdt->th_irq, "Failed to get IRQ for threshold\n"); in keembay_wdt_probe()
218 return dev_err_probe(dev, ret, "Failed to request IRQ for threshold\n"); in keembay_wdt_probe()
222 return dev_err_probe(dev, wdt->to_irq, "Failed to get IRQ for timeout\n"); in keembay_wdt_probe()
227 return dev_err_probe(dev, ret, "Failed to request IRQ for timeout\n"); in keembay_wdt_probe()
245 return dev_err_probe(dev, ret, "Failed to register watchdog device.\n"); in keembay_wdt_probe()
|
| /openbmc/linux/drivers/crypto/starfive/ |
| H A D | jh7110-cryp.c | 73 return dev_err_probe(cryp->dev, PTR_ERR(cryp->tx), in starfive_dma_init()
79 return dev_err_probe(cryp->dev, PTR_ERR(cryp->rx), in starfive_dma_init()
137 return dev_err_probe(&pdev->dev, PTR_ERR(cryp->base), in starfive_cryp_probe()
149 return dev_err_probe(&pdev->dev, PTR_ERR(cryp->hclk), in starfive_cryp_probe()
154 return dev_err_probe(&pdev->dev, PTR_ERR(cryp->ahb), in starfive_cryp_probe()
159 return dev_err_probe(&pdev->dev, PTR_ERR(cryp->rst), in starfive_cryp_probe()
171 return dev_err_probe(&pdev->dev, ret, in starfive_cryp_probe()
|