| /openbmc/linux/include/linux/ |
| H A D | mman.h | 134 #define _calc_vm_trans(x, bit1, bit2) \ argument
135 ((!(bit1) || !(bit2)) ? 0 : \
136 ((bit1) <= (bit2) ? ((x) & (bit1)) * ((bit2) / (bit1)) \
137 : ((x) & (bit1)) / ((bit1) / (bit2))))
|
| /openbmc/u-boot/tools/ |
| H A D | vybridimage.c | 44 uint8_t bit2 = (byte & (1 << 2)) ? 1 : 0; in vybridimage_sw_ecc() local
52 res |= ((bit6 ^ bit5 ^ bit3 ^ bit2) << 0); in vybridimage_sw_ecc()
53 res |= ((bit7 ^ bit5 ^ bit4 ^ bit2 ^ bit1) << 1); in vybridimage_sw_ecc()
56 res |= ((bit6 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0) << 4); in vybridimage_sw_ecc()
|
| /openbmc/linux/Documentation/driver-api/mtd/ |
| H A D | nand_ecc.rst | 45 byte 0: bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 rp0 rp2 rp4 ... rp14
46 byte 1: bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 rp1 rp2 rp4 ... rp14
47 byte 2: bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 rp0 rp3 rp4 ... rp14
48 byte 3: bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 rp1 rp3 rp4 ... rp14
49 byte 4: bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 rp0 rp2 rp5 ... rp14
51 byte 254: bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 rp0 rp3 rp5 ... rp15
52 byte 255: bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 rp1 rp3 rp5 ... rp15
63 - cp0 is the parity that belongs to all bit0, bit2, bit4, bit6.
65 so the sum of all bit0, bit2, bit4 and bit6 values + cp0 itself is even.
70 - cp3 is the parity over bit2, bit3, bit6 and bit7.
[all …]
|
| /openbmc/libpldm/include/libpldm/ |
| H A D | pldm_types.h | 12 uint8_t bit2 : 1; member
39 uint8_t bit2 : 1; member
61 uint8_t bit2 : 1; member
99 uint8_t bit2 : 1; member
|
| /openbmc/linux/drivers/staging/media/atomisp/pci/hive_isp_css_include/ |
| H A D | math_support.h | 49 #define bit2(x) ((x) | ((x) >> 1)) macro
50 #define bit4(x) (bit2(x) | (bit2(x) >> 2))
|
| /openbmc/linux/include/uapi/linux/ |
| H A D | ioam6.h | 60 bit2:1, member
99 bit2:1, member
|
| /openbmc/linux/Documentation/leds/ |
| H A D | leds-mlxcpld.rst | 53 [bit3,bit2,bit1,bit0] or
98 [bit3,bit2,bit1,bit0] or
110 [bit3,bit2,bit1,bit0]:
|
| /openbmc/u-boot/board/Seagate/nas220/ |
| H A D | kwbimage.cfg | 88 # bit2-0: 2, BurstLen=2 required
101 # bit2: 0, DDR ODT control lsd (disabled)
111 # bit2-0: 111, required
|
| /openbmc/u-boot/board/Seagate/dockstar/ |
| H A D | kwbimage.cfg | 86 # bit2-0: 2, BurstLen=2 required
98 # bit2: 0, DDR ODT control lsd (disabled)
108 # bit2-0: 111, required
|
| /openbmc/u-boot/board/Synology/ds109/ |
| H A D | kwbimage.cfg | 87 # bit2-0: 2, BurstLen=2 required
99 # bit2: 0, DDR ODT control lsd (disabled)
109 # bit2-0: 111, required
|
| /openbmc/u-boot/board/Seagate/goflexhome/ |
| H A D | kwbimage.cfg | 89 # bit2-0: 2, BurstLen=2 required
101 # bit2: 0, DDR ODT control lsd (disabled)
111 # bit2-0: 111, required
|
| /openbmc/u-boot/board/Marvell/dreamplug/ |
| H A D | kwbimage.cfg | 84 # bit2-0: 2, BurstLen=2 required
96 # bit2: 0, DDR ODT control lsd (disabled)
106 # bit2-0: 111, required
|
| /openbmc/u-boot/board/Marvell/sheevaplug/ |
| H A D | kwbimage.cfg | 83 # bit2-0: 2, BurstLen=2 required
95 # bit2: 0, DDR ODT control lsd (disabled)
105 # bit2-0: 111, required
|
| /openbmc/u-boot/board/Marvell/guruplug/ |
| H A D | kwbimage.cfg | 83 # bit2-0: 2, BurstLen=2 required
95 # bit2: 0, DDR ODT control lsd (disabled)
105 # bit2-0: 111, required
|
| /openbmc/u-boot/board/LaCie/netspace_v2/ |
| H A D | kwbimage.cfg | 83 # bit2-0: 2, BurstLen=2 required
95 # bit2: 1, DDR ODT control lsd enabled
105 # bit2-0: 111, required
|
| H A D | kwbimage-is2.cfg | 83 # bit2-0: 2, BurstLen=2 required
95 # bit2: 1, DDR ODT control lsd enabled
105 # bit2-0: 111, required
|
| H A D | kwbimage-ns2l.cfg | 83 # bit2-0: 2, BurstLen=2 required
95 # bit2: 1, DDR ODT control lsd enabled
105 # bit2-0: 111, required
|
| /openbmc/u-boot/board/cloudengines/pogo_e02/ |
| H A D | kwbimage.cfg | 87 # bit2-0: 2, BurstLen=2 required
99 # bit2: 0, DDR ODT control lsd (disabled)
109 # bit2-0: 111, required
|
| /openbmc/u-boot/board/iomega/iconnect/ |
| H A D | kwbimage.cfg | 83 # bit2-0: 0x2, BurstLen=2 required
95 # bit2: 0, DDR ODT control lsd (disabled)
105 # bit2-0: 0x7, required
|
| /openbmc/u-boot/board/Marvell/openrd/ |
| H A D | kwbimage.cfg | 83 # bit2-0: 2, BurstLen=2 required
95 # bit2: 0, DDR ODT control lsd (disabled)
105 # bit2-0: 111, required
|
| /openbmc/u-boot/board/LaCie/net2big_v2/ |
| H A D | kwbimage.cfg | 83 # bit2-0: 2, BurstLen=2 required
95 # bit2: 1, DDR ODT control lsd enabled
105 # bit2-0: 111, required
|
| /openbmc/u-boot/board/raidsonic/ib62x0/ |
| H A D | kwbimage.cfg | 84 # bit2-0: 0x2, BurstLen=2 required
96 # bit2: 1, DDR ODT control lsd (disabled)
106 # bit2-0: 0x7, required
|
| /openbmc/linux/arch/arm/mach-omap2/ |
| H A D | sram243x.S | 50 mvn r9, #0x4 @ mask to get clear bit2
51 and r10, r10, r9 @ clear bit2 for lock mode.
289 mvn r9, #0x4 @ mask to get clear bit2
290 and r10, r10, r9 @ clear bit2 for lock mode
|
| H A D | sram242x.S | 50 mvn r9, #0x4 @ mask to get clear bit2
51 and r10, r10, r9 @ clear bit2 for lock mode.
289 mvn r9, #0x4 @ mask to get clear bit2
290 and r10, r10, r9 @ clear bit2 for lock mode
|
| /openbmc/u-boot/board/buffalo/lsxl/ |
| H A D | kwbimage-lschl.cfg | 101 # bit2-0: 2, Burst Length (2 required)
114 # bit2: 0, ODT control Rtt[0] (Rtt=2, 150 ohm termination)
125 # bit2-0: 0x7 required
|