| /openbmc/linux/drivers/power/reset/ |
| H A D | linkstation-poweroff.c | 56 __phy_modify(phydev, MII_PHY_LED_CTRL, LEDMASK, LED2_FORCE_ON); in linkstation_mvphy_reg_intn()
59 __phy_modify(phydev, MII_88E1318S_PHY_LED_TCR, in linkstation_mvphy_reg_intn()
95 __phy_modify(phydev, MII_PHY_LED_POL_CTRL, in readynas_mvphy_set_reg()
|
| /openbmc/linux/drivers/net/phy/ |
| H A D | motorcomm.c | 398 return __phy_modify(phydev, YTPHY_PAGE_DATA, mask, set); in ytphy_modify_ext()
506 ret = __phy_modify(phydev, YTPHY_INTERRUPT_ENABLE_REG, 0, in ytphy_set_wol()
521 ret = __phy_modify(phydev, YTPHY_INTERRUPT_ENABLE_REG, in ytphy_set_wol()
628 ret = __phy_modify(phydev, YT8511_PAGE, (YT8511_DELAY_RX | YT8511_DELAY_GE_TX_EN), ge); in yt8511_config_init()
633 ret = __phy_modify(phydev, YT8511_PAGE, 0, YT8511_CLK_125M); in yt8511_config_init()
642 ret = __phy_modify(phydev, YT8511_PAGE, YT8511_DELAY_FE_TX_EN, fe); in yt8511_config_init()
651 ret = __phy_modify(phydev, YT8511_PAGE, 0, YT8511_PLLON_SLP); in yt8511_config_init()
1445 ret = __phy_modify(phydev, MII_BMCR, mask, set); in yt8521_modify_bmcr_paged()
1735 ret = __phy_modify(phydev, MII_BMCR, BMCR_ANENABLE, 0); in yt8521_fiber_setup_forced()
1782 return __phy_modify(phydev, MII_BMCR, BMCR_ISOLATE, in ytphy_check_and_restart_aneg()
[all …]
|
| H A D | icplus.c | 247 err = __phy_modify(phydev, IP101G_DIGITAL_IO_SPEC_CTRL, in ip101a_g_config_intr_pin()
254 err = __phy_modify(phydev, IP101G_DIGITAL_IO_SPEC_CTRL, in ip101a_g_config_intr_pin()
373 ret = __phy_modify(phydev, IP10XX_SPEC_CTRL_STATUS, in ip101a_g_config_mdix()
378 ret = __phy_modify(phydev, IP101A_G_PHY_SPEC_CTRL, in ip101a_g_config_mdix()
|
| H A D | phy-core.c | 693 int __phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set) in __phy_modify() function
701 EXPORT_SYMBOL_GPL(__phy_modify);
719 ret = __phy_modify(phydev, regnum, mask, set); in phy_modify()
|
| H A D | marvell.c | 1867 err = __phy_modify(phydev, MII_88E1318S_PHY_LED_TCR, in m88e1318_set_wol()
1909 err = __phy_modify(phydev, MII_88E1318S_PHY_WOL_CTRL, in m88e1318_set_wol()
1922 err = __phy_modify(phydev, MII_88E1318S_PHY_WOL_CTRL, 0, in m88e1318_set_wol()
1933 err = __phy_modify(phydev, MII_88E1318S_PHY_WOL_CTRL, in m88e1318_set_wol()
3217 ret = __phy_modify(phydev, MII_88E1510_GEN_CTRL_REG_1, in m88e1510_sfp_insert()
3239 ret = __phy_modify(phydev, MII_88E1510_GEN_CTRL_REG_1, in m88e1510_sfp_remove()
|
| H A D | mediatek-ge-soc.c | 979 __phy_modify(phydev, MTK_PHY_LPI_REG_14, MTK_PHY_LPI_WAKE_TIMER_1000_MASK, in mt798x_phy_eee()
982 __phy_modify(phydev, MTK_PHY_LPI_REG_1c, MTK_PHY_SMI_DET_ON_THRESH_MASK, in mt798x_phy_eee()
|
| H A D | realtek.c | 505 ret = __phy_modify(phydev, 0x1c, RTL8211E_CTRL_DELAY in rtl8211e_config_init()
|
| H A D | at803x.c | 378 return __phy_modify(phydev, AT803X_REG_CHIP_CONFIG, mask, set); in at803x_write_page()
|
| /openbmc/linux/drivers/net/ethernet/realtek/ |
| H A D | r8169_phy_config.c | 26 __phy_modify(phydev, reg, mask, val); in r8168d_modify_extpage()
37 __phy_modify(phydev, 0x06, mask, val); in r8168d_phy_param()
48 __phy_modify(phydev, 0x14, mask, val); in r8168g_phy_param()
|
| /openbmc/linux/include/linux/ |
| H A D | phy.h | 1379 int __phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set);
1401 return __phy_modify(phydev, regnum, 0, val); in __phy_set_bits()
1415 return __phy_modify(phydev, regnum, val, 0); in __phy_clear_bits()
|
| /openbmc/linux/drivers/net/phy/mscc/ |
| H A D | mscc_main.c | 1568 __phy_modify(phydev, MSCC_PHY_GPIO_CONTROL_2, in vsc85xx_coma_mode_release()
|