| /openbmc/u-boot/board/Arcturus/ucp1020/ |
| H A D | ucp1020.h | 22 #define GPIO11 20 macro
32 #define GPIO_PCIE1_EN GPIO11
34 #define GPIO_USB_PCTL1 GPIO11
|
| /openbmc/linux/drivers/pinctrl/ |
| H A D | pinctrl-xway.c | 126 MFP_XWAY(GPIO11, GPIO, EBU, CGU, JTAG),
155 static const unsigned ase_pins_jtag[] = {GPIO7, GPIO8, GPIO9, GPIO10, GPIO11};
254 MFP_XWAY(GPIO11, GPIO, ASC, CBUS, SPI),
284 static const unsigned danube_pins_asc0[] = {GPIO11, GPIO12};
312 static const unsigned danube_pins_spi_cs6[] = {GPIO11};
429 MFP_XWAY(GPIO11, GPIO, ASC, CBUS, SPI),
485 static const unsigned xrx100_pins_asc0[] = {GPIO11, GPIO12};
515 static const unsigned xrx100_pins_spi_cs6[] = {GPIO11};
642 MFP_XWAY(GPIO11, GPIO, USIF, CBUS, SPI),
692 static const unsigned xrx200_pins_usif_uart_rx[] = {GPIO11};
[all …]
|
| H A D | pinctrl-lantiq.h | 118 GPIO11, enumerator
|
| H A D | pinctrl-falcon.c | 118 MFP_FALCON(GPIO11, LED, GPIO, NONE, NONE),
169 static const unsigned pins_bled[] = {GPIO9, GPIO10, GPIO11,
|
| /openbmc/linux/arch/arm/mach-pxa/ |
| H A D | mfp-pxa27x.h | 61 #define GPIO11_48_MHz MFP_CFG_OUT(GPIO11, AF3, DRIVE_LOW)
66 #define GPIO11_EXT_SYNC_0 MFP_CFG_IN(GPIO11, AF1)
70 #define GPIO11_CHOUT_0 MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
177 #define GPIO11_PWM2_OUT MFP_CFG_OUT(GPIO11, AF2, DRIVE_LOW)
239 #define GPIO11_SSP2_RXD MFP_CFG_IN(GPIO11, AF2)
339 #define GPIO11_USB_P3_1 MFP_CFG_IN(GPIO11, AF3)
|
| H A D | pxa320.c | 29 MFP_ADDR_X(GPIO11, GPIO26, 0x02A0),
|
| H A D | mfp-pxa2xx.h | 65 #define GPIO11_GPIO MFP_CFG_IN(GPIO11, AF0)
|
| H A D | mfp-pxa320.h | 48 #define GPIO11_AC97_SDATA_IN_2 MFP_CFG(GPIO11, AF3)
77 #define GPIO11_EXT_SYNC0 MFP_CFG(GPIO11, AF5)
453 #define GPIO11_PWM0_OUT MFP_CFG(GPIO11, AF1)
|
| H A D | mfp-pxa3xx.h | 23 #define GPIO11_GPIO MFP_CFG(GPIO11, AF0)
|
| H A D | mfp-pxa25x.h | 22 #define GPIO11_3_6MHz MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
|
| H A D | mfp-pxa300.h | 134 #define GPIO11_KP_MKOUT_5 MFP_CFG_LPM(GPIO11, AF3, DRIVE_HIGH)
223 #define GPIO11_MMC2_DAT2 MFP_CFG_LPM(GPIO11, AF4, PULL_HIGH)
|
| /openbmc/linux/arch/arm/boot/dts/broadcom/ |
| H A D | bcm2837-rpi-cm3-io3.dts | 30 "GPIO11",
|
| H A D | bcm2835-rpi-cm1-io1.dts | 30 "GPIO11",
|
| /openbmc/u-boot/arch/arm/include/asm/arch-omap3/ |
| H A D | omap.h | 120 #define GPIO11 (0x1 << 11) macro
|
| /openbmc/linux/arch/arm64/boot/dts/freescale/ |
| H A D | imx8mp-msc-sm2s-ep1.dts | 117 <MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x19>, /* GPIO11 */
|
| H A D | fsl-ls1028a-kontron-sl28.dts | 261 "GPIO8", "GPIO9", "GPIO10", "GPIO11",
|
| /openbmc/linux/Documentation/devicetree/bindings/sound/ |
| H A D | rt5645.txt | 42 3: using GPIO11 pin as dmic2 data pin
|
| H A D | rt5659.txt | 28 4: using GPIO11 pin as dmic1 data pin
|
| /openbmc/linux/arch/arm/boot/dts/nuvoton/ |
| H A D | nuvoton-npcm750-pincfg-evb.dtsi | 22 pins = "GPIO11/IOXHCK";
|
| /openbmc/linux/arch/mips/boot/dts/ralink/ |
| H A D | gardena_smart_gateway_mt7688.dts | 27 pinctrl-0 = <&pinmux_gpio_gpio>; /* GPIO11 */
|
| /openbmc/linux/arch/arm64/boot/dts/rockchip/ |
| H A D | rk3566-soquartz-cm4.dts | 150 * pin 38 - GPIO11 - spi3_clk_m0
|
| H A D | rk3566-soquartz-blade.dts | 152 * pin 38 - GPIO11 - spi3_clk_m0
|
| H A D | rk3566-soquartz-model-a.dts | 182 * pin 38 - GPIO11 - spi3_clk_m0
|
| /openbmc/linux/arch/arm64/boot/dts/bitmain/ |
| H A D | bm1880-sophon-edge.dts | 67 "LED_WIFI", /* GPIO11 */
|
| /openbmc/linux/arch/arm/boot/dts/ti/keystone/ |
| H A D | keystone-k2l.dtsi | 184 * GPIO_TIMIO_SEL[11]: 0-GPIO11, 1-TIMO3
|