| /openbmc/qemu/target/riscv/insn_trans/ |
| H A D | trans_rvzicbo.c.inc | a939c500793ae7672defe5e3dc83220576a7b202 Fri Feb 24 07:25:34 CST 2023 Christoph Muellner <cmuellner@linux.com> target/riscv: implement Zicboz extension
The RISC-V base cache management operation (CBO) ISA extension has been
ratified. It defines three extensions: Cache-Block Management, Cache-Block
Prefetch and Cache-Block Zero. More information about the spec can be
found at [1].
Let's start by implementing the Cache-Block Zero extension, Zicboz. It
uses the cbo.zero instruction that, as with all CBO instructions that
will be added later, needs to be implemented in an overlap group with
the LQ instruction due to overlapping patterns.
cbo.zero throws a Illegal Instruction/Virtual Instruction exception
depending on CSR state. This is also the case for the remaining cbo
instructions we're going to add next, so create a check_zicbo_envcfg()
that will be used by all Zicbo[mz] instructions.
[1] https://github.com/riscv/riscv-CMOs/blob/master/specifications/cmobase-v1.0.1.pdf
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Signed-off-by: Christoph Muellner <cmuellner@linux.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230224132536.552293-3-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
| /openbmc/qemu/target/riscv/ |
| H A D | helper.h | diff a939c500793ae7672defe5e3dc83220576a7b202 Fri Feb 24 07:25:34 CST 2023 Christoph Muellner <cmuellner@linux.com> target/riscv: implement Zicboz extension
The RISC-V base cache management operation (CBO) ISA extension has been
ratified. It defines three extensions: Cache-Block Management, Cache-Block
Prefetch and Cache-Block Zero. More information about the spec can be
found at [1].
Let's start by implementing the Cache-Block Zero extension, Zicboz. It
uses the cbo.zero instruction that, as with all CBO instructions that
will be added later, needs to be implemented in an overlap group with
the LQ instruction due to overlapping patterns.
cbo.zero throws a Illegal Instruction/Virtual Instruction exception
depending on CSR state. This is also the case for the remaining cbo
instructions we're going to add next, so create a check_zicbo_envcfg()
that will be used by all Zicbo[mz] instructions.
[1] https://github.com/riscv/riscv-CMOs/blob/master/specifications/cmobase-v1.0.1.pdf
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Signed-off-by: Christoph Muellner <cmuellner@linux.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230224132536.552293-3-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
| H A D | op_helper.c | diff a939c500793ae7672defe5e3dc83220576a7b202 Fri Feb 24 07:25:34 CST 2023 Christoph Muellner <cmuellner@linux.com> target/riscv: implement Zicboz extension
The RISC-V base cache management operation (CBO) ISA extension has been
ratified. It defines three extensions: Cache-Block Management, Cache-Block
Prefetch and Cache-Block Zero. More information about the spec can be
found at [1].
Let's start by implementing the Cache-Block Zero extension, Zicboz. It
uses the cbo.zero instruction that, as with all CBO instructions that
will be added later, needs to be implemented in an overlap group with
the LQ instruction due to overlapping patterns.
cbo.zero throws a Illegal Instruction/Virtual Instruction exception
depending on CSR state. This is also the case for the remaining cbo
instructions we're going to add next, so create a check_zicbo_envcfg()
that will be used by all Zicbo[mz] instructions.
[1] https://github.com/riscv/riscv-CMOs/blob/master/specifications/cmobase-v1.0.1.pdf
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Signed-off-by: Christoph Muellner <cmuellner@linux.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230224132536.552293-3-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
| H A D | insn32.decode | diff a939c500793ae7672defe5e3dc83220576a7b202 Fri Feb 24 07:25:34 CST 2023 Christoph Muellner <cmuellner@linux.com> target/riscv: implement Zicboz extension
The RISC-V base cache management operation (CBO) ISA extension has been
ratified. It defines three extensions: Cache-Block Management, Cache-Block
Prefetch and Cache-Block Zero. More information about the spec can be
found at [1].
Let's start by implementing the Cache-Block Zero extension, Zicboz. It
uses the cbo.zero instruction that, as with all CBO instructions that
will be added later, needs to be implemented in an overlap group with
the LQ instruction due to overlapping patterns.
cbo.zero throws a Illegal Instruction/Virtual Instruction exception
depending on CSR state. This is also the case for the remaining cbo
instructions we're going to add next, so create a check_zicbo_envcfg()
that will be used by all Zicbo[mz] instructions.
[1] https://github.com/riscv/riscv-CMOs/blob/master/specifications/cmobase-v1.0.1.pdf
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Signed-off-by: Christoph Muellner <cmuellner@linux.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230224132536.552293-3-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
| H A D | translate.c | diff a939c500793ae7672defe5e3dc83220576a7b202 Fri Feb 24 07:25:34 CST 2023 Christoph Muellner <cmuellner@linux.com> target/riscv: implement Zicboz extension
The RISC-V base cache management operation (CBO) ISA extension has been
ratified. It defines three extensions: Cache-Block Management, Cache-Block
Prefetch and Cache-Block Zero. More information about the spec can be
found at [1].
Let's start by implementing the Cache-Block Zero extension, Zicboz. It
uses the cbo.zero instruction that, as with all CBO instructions that
will be added later, needs to be implemented in an overlap group with
the LQ instruction due to overlapping patterns.
cbo.zero throws a Illegal Instruction/Virtual Instruction exception
depending on CSR state. This is also the case for the remaining cbo
instructions we're going to add next, so create a check_zicbo_envcfg()
that will be used by all Zicbo[mz] instructions.
[1] https://github.com/riscv/riscv-CMOs/blob/master/specifications/cmobase-v1.0.1.pdf
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Signed-off-by: Christoph Muellner <cmuellner@linux.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230224132536.552293-3-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
| H A D | cpu.h | diff a939c500793ae7672defe5e3dc83220576a7b202 Fri Feb 24 07:25:34 CST 2023 Christoph Muellner <cmuellner@linux.com> target/riscv: implement Zicboz extension
The RISC-V base cache management operation (CBO) ISA extension has been
ratified. It defines three extensions: Cache-Block Management, Cache-Block
Prefetch and Cache-Block Zero. More information about the spec can be
found at [1].
Let's start by implementing the Cache-Block Zero extension, Zicboz. It
uses the cbo.zero instruction that, as with all CBO instructions that
will be added later, needs to be implemented in an overlap group with
the LQ instruction due to overlapping patterns.
cbo.zero throws a Illegal Instruction/Virtual Instruction exception
depending on CSR state. This is also the case for the remaining cbo
instructions we're going to add next, so create a check_zicbo_envcfg()
that will be used by all Zicbo[mz] instructions.
[1] https://github.com/riscv/riscv-CMOs/blob/master/specifications/cmobase-v1.0.1.pdf
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Signed-off-by: Christoph Muellner <cmuellner@linux.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230224132536.552293-3-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
| H A D | cpu.c | diff a939c500793ae7672defe5e3dc83220576a7b202 Fri Feb 24 07:25:34 CST 2023 Christoph Muellner <cmuellner@linux.com> target/riscv: implement Zicboz extension
The RISC-V base cache management operation (CBO) ISA extension has been
ratified. It defines three extensions: Cache-Block Management, Cache-Block
Prefetch and Cache-Block Zero. More information about the spec can be
found at [1].
Let's start by implementing the Cache-Block Zero extension, Zicboz. It
uses the cbo.zero instruction that, as with all CBO instructions that
will be added later, needs to be implemented in an overlap group with
the LQ instruction due to overlapping patterns.
cbo.zero throws a Illegal Instruction/Virtual Instruction exception
depending on CSR state. This is also the case for the remaining cbo
instructions we're going to add next, so create a check_zicbo_envcfg()
that will be used by all Zicbo[mz] instructions.
[1] https://github.com/riscv/riscv-CMOs/blob/master/specifications/cmobase-v1.0.1.pdf
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Signed-off-by: Christoph Muellner <cmuellner@linux.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230224132536.552293-3-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|