target/riscv: Correct SXL return value for RV32 in RV64 QEMU

Ensure that riscv_cpu_sxl returns MXL_RV32 when runningRV32 in an
RV64 QEMU.

Signed-off-by: TANG Tiancheng <tangtiancheng.ttc@alibaba-in

target/riscv: Correct SXL return value for RV32 in RV64 QEMU

Ensure that riscv_cpu_sxl returns MXL_RV32 when runningRV32 in an
RV64 QEMU.

Signed-off-by: TANG Tiancheng <tangtiancheng.ttc@alibaba-inc.com>
Fixes: 05e6ca5e156 ("target/riscv: Ignore reserved bits in PTE for RV64")
Reviewed-by: Liu Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240919055048.562-4-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit 929e4277c128772bad41cc795995f754cb9991af)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

show more ...

Merge tag 'pull-riscv-to-apply-20241031-1' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.2

* Fix an access to VXSAT
* Expose RV32 cpu to RV64 QEMU
* Don't clear PLIC pending bi

Merge tag 'pull-riscv-to-apply-20241031-1' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.2

* Fix an access to VXSAT
* Expose RV32 cpu to RV64 QEMU
* Don't clear PLIC pending bits on IRQ lowering
* Make PLIC zeroth priority register read-only
* Set vtype.vill on CPU reset
* Check and update APLIC pending when write sourcecfg
* Avoid dropping charecters with HTIF
* Apply FIFO backpressure to guests using SiFive UART
* Support for control flow integrity extensions
* Support for the IOMMU with the virt machine
* set 'aia_mode' to default in error path
* clarify how 'riscv-aia' default works

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmci/tQACgkQr3yVEwxT
# gBNPAQ//dZKjjJm4Sh+UFdUslivBJYtL1rl2UUG2UqiNn/UoYh/vcHoSArljHTjt
# 8riEStnaQqXziOpMIJjIMLJ4KoiIk2SMvjNfFtcmPiPZEDEpjsTxfUxBFsBee+fI
# 4KNQKKFeljq4pa+VzVvXEqzCNJIzCThFXTZhZmer00M91HPA8ZQIHpv2JL1sWlgZ
# /HW24XEDFLGc/JsR55fxpPftlAqP+BfOrqMmbWy7x2Y+G8WI05hM2zTP/W8pnIz3
# z0GCRYSBlADtrp+3RqzTwQfK5pXoFc0iDktWVYlhoXaeEmOwo8IYxTjrvBGhnBq+
# ySX1DzTa23QmOIxSYYvCRuOxyOK9ziNn+EQ9FiFBt1h1o251CYMil1bwmYXMCMNJ
# rZwF1HfUx0g2GQW1ZOqh1eeyLO29JiOdV3hxlDO7X4bbISNgU6il5MXmnvf0/XVW
# Af3YhALeeDbHgHL1iVfjafzaviQc9+YrEX13eX6N2AjcgE5a3F7XNmGfFpFJ+mfQ
# CPgiwVBXat6UpBUGAt14UM+6wzp+crSgQR5IEGth+mKMKdkWoykvo7A2oHdu39zn
# 2cdzsshg2qcLLUPTFy06OOTXX382kCWXuykhHOjZ4uu2SJJ7R0W3PlYV8HSde2Vu
# Rj+89ZlUSICJNXXweQB39r87hNbtRuDIO22V0B9XrApQbJj6/yE=
# =rPaa
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 31 Oct 2024 03:51:48 GMT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013

* tag 'pull-riscv-to-apply-20241031-1' of https://github.com/alistair23/qemu: (50 commits)
target/riscv: Fix vcompress with rvv_ta_all_1s
target/riscv/kvm: clarify how 'riscv-aia' default works
target/riscv/kvm: set 'aia_mode' to default in error path
docs/specs: add riscv-iommu
qtest/riscv-iommu-test: add init queues test
hw/riscv/riscv-iommu: add DBG support
hw/riscv/riscv-iommu: add ATS support
hw/riscv/riscv-iommu: add Address Translation Cache (IOATC)
test/qtest: add riscv-iommu-pci tests
hw/riscv/virt.c: support for RISC-V IOMMU PCIDevice hotplug
hw/riscv: add riscv-iommu-pci reference device
pci-ids.rst: add Red Hat pci-id for RISC-V IOMMU device
hw/riscv: add RISC-V IOMMU base emulation
hw/riscv: add riscv-iommu-bits.h
exec/memtxattr: add process identifier to the transaction attributes
target/riscv: Expose zicfiss extension as a cpu property
disas/riscv: enable disassembly for compressed sspush/sspopchk
disas/riscv: enable disassembly for zicfiss instructions
target/riscv: compressed encodings for sspush and sspopchk
target/riscv: implement zicfiss instructions
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/riscv: AMO operations always raise store/AMO fault

This patch adds one more word for tcg compile which can be obtained during
unwind time to determine fault type for original operation (examp

target/riscv: AMO operations always raise store/AMO fault

This patch adds one more word for tcg compile which can be obtained during
unwind time to determine fault type for original operation (example AMO).
Depending on that, fault can be promoted to store/AMO fault.

Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241008225010.1861630-15-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

target/riscv: tb flag for shadow stack instructions

Shadow stack instructions can be decoded as zimop / zcmop or shadow stack
instructions depending on whether shadow stack are enabled at current
pr

target/riscv: tb flag for shadow stack instructions

Shadow stack instructions can be decoded as zimop / zcmop or shadow stack
instructions depending on whether shadow stack are enabled at current
privilege. This requires a TB flag so that correct TB generation and correct
TB lookup happens. `DisasContext` gets a field indicating whether bcfi is
enabled or not.

Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Co-developed-by: Jim Shu <jim.shu@sifive.com>
Co-developed-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241008225010.1861630-13-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

target/riscv: introduce ssp and enabling controls for zicfiss

zicfiss introduces a new state ssp ("shadow stack register") in cpu.
ssp is expressed as a new unprivileged csr (CSR_SSP=0x11) and holds

target/riscv: introduce ssp and enabling controls for zicfiss

zicfiss introduces a new state ssp ("shadow stack register") in cpu.
ssp is expressed as a new unprivileged csr (CSR_SSP=0x11) and holds
virtual address for shadow stack as programmed by software.

Shadow stack (for each mode) is enabled via bit3 in *envcfg CSRs.
Shadow stack can be enabled for a mode only if it's higher privileged
mode had it enabled for itself. M mode doesn't need enabling control,
it's always available if extension is available on cpu.

This patch also implements helper bcfi function which determines if bcfi
is enabled at current privilege or not.

Adds ssp to migration state as well.

Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Co-developed-by: Jim Shu <jim.shu@sifive.com>
Co-developed-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241008225010.1861630-12-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

target/riscv: tracking indirect branches (fcfi) for zicfilp

zicfilp protects forward control flow (if enabled) by enforcing all
indirect call and jmp must land on a landing pad instruction `lpad`. I

target/riscv: tracking indirect branches (fcfi) for zicfilp

zicfilp protects forward control flow (if enabled) by enforcing all
indirect call and jmp must land on a landing pad instruction `lpad`. If
target of an indirect call or jmp is not `lpad` then cpu/hart must raise
a sw check exception with tval = 2.

This patch implements the mechanism using TCG. Target architecture branch
instruction must define the end of a TB. Using this property, during
translation of branch instruction, TB flag = FCFI_LP_EXPECTED can be set.
Translation of target TB can check if FCFI_LP_EXPECTED flag is set and a
flag (fcfi_lp_expected) can be set in DisasContext. If `lpad` gets
translated, fcfi_lp_expected flag in DisasContext can be cleared. Else
it'll fault.

Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Co-developed-by: Jim Shu <jim.shu@sifive.com>
Co-developed-by: Andy Chiu <andy.chiu@sifive.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241008225010.1861630-7-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

target/riscv: additional code information for sw check

sw check exception support was recently added. This patch further augments
sw check exception by providing support for additional code which is

target/riscv: additional code information for sw check

sw check exception support was recently added. This patch further augments
sw check exception by providing support for additional code which is
provided in *tval. Adds `sw_check_code` field in cpuarchstate. Whenever
sw check exception is raised *tval gets the value deposited in
`sw_check_code`.

Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241008225010.1861630-6-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

target/riscv: save and restore elp state on priv transitions

elp state is recorded in *status on trap entry (less privilege to higher
privilege) and restored in elp from *status on trap exit (higher

target/riscv: save and restore elp state on priv transitions

elp state is recorded in *status on trap entry (less privilege to higher
privilege) and restored in elp from *status on trap exit (higher to less
privilege).

Additionally this patch introduces a forward cfi helper function to
determine if current privilege has forward cfi is enabled or not based on
*envcfg (for U, VU, S, VU, HS) or mseccfg csr (for M).

Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Co-developed-by: Jim Shu <jim.shu@sifive.com>
Co-developed-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241008225010.1861630-5-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

target/riscv: Introduce elp state and enabling controls for zicfilp

zicfilp introduces a new state elp ("expected landing pad") in cpu.
During normal execution, elp is idle (NO_LP_EXPECTED) i.e not

target/riscv: Introduce elp state and enabling controls for zicfilp

zicfilp introduces a new state elp ("expected landing pad") in cpu.
During normal execution, elp is idle (NO_LP_EXPECTED) i.e not expecting
landing pad. On an indirect call, elp moves LP_EXPECTED. When elp is
LP_EXPECTED, only a subsquent landing pad instruction can set state back
to NO_LP_EXPECTED. On reset, elp is set to NO_LP_EXPECTED.

zicfilp is enabled via bit2 in *envcfg CSRs. Enabling control for M-mode
is in mseccfg CSR at bit position 10.

On trap, elp state is saved away in *status.
Adds elp to the migration state as well.

Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Co-developed-by: Jim Shu <jim.shu@sifive.com>
Co-developed-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241008225010.1861630-4-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

target/riscv: expose *envcfg csr and priv to qemu-user as well

Execution environment config CSR controlling user env and current
privilege state shouldn't be limited to qemu-system only. *envcfg
CSR

target/riscv: expose *envcfg csr and priv to qemu-user as well

Execution environment config CSR controlling user env and current
privilege state shouldn't be limited to qemu-system only. *envcfg
CSRs control enabling of features in next lesser mode. In some cases
bits *envcfg CSR can be lit up by kernel as part of kernel policy or
software (user app) can choose to opt-in by issuing a system call
(e.g. prctl). In case of qemu-user, it should be no different because
qemu is providing underlying execution environment facility and thus
either should provide some default value in *envcfg CSRs or react to
system calls (prctls) initiated from application. priv is set to PRV_U
and menvcfg/senvcfg set to 0 for qemu-user on reest.

`henvcfg` has been left for qemu-system only because it is not expected
that someone will use qemu-user where application is expected to have
hypervisor underneath which is controlling its execution environment. If
such a need arises then `henvcfg` could be exposed as well.

Relevant discussion:
https://lore.kernel.org/all/CAKmqyKOTVWPFep2msTQVdUmJErkH+bqCcKEQ4hAnyDFPdWKe0Q@mail.gmail.com/

Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241008225010.1861630-2-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

target/riscv: Correct SXL return value for RV32 in RV64 QEMU

Ensure that riscv_cpu_sxl returns MXL_RV32 when runningRV32 in an
RV64 QEMU.

Signed-off-by: TANG Tiancheng <tangtiancheng.ttc@alibaba-in

target/riscv: Correct SXL return value for RV32 in RV64 QEMU

Ensure that riscv_cpu_sxl returns MXL_RV32 when runningRV32 in an
RV64 QEMU.

Signed-off-by: TANG Tiancheng <tangtiancheng.ttc@alibaba-inc.com>
Fixes: 05e6ca5e156 ("target/riscv: Ignore reserved bits in PTE for RV64")
Reviewed-by: Liu Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240919055048.562-4-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge tag 'pull-riscv-to-apply-20240718-1' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.1

* Support the zimop, zcmop, zama16b and zabha extensions
* Validate the mode when set

Merge tag 'pull-riscv-to-apply-20240718-1' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.1

* Support the zimop, zcmop, zama16b and zabha extensions
* Validate the mode when setting vstvec CSR
* Add decode support for Zawrs extension
* Update the KVM regs to Linux 6.10-rc5
* Add smcntrpmf extension support
* Raise an exception when CSRRS/CSRRC writes a read-only CSR
* Re-insert and deprecate 'riscv,delegate' in virt machine device tree
* roms/opensbi: Update to v1.5

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmaYeUcACgkQr3yVEwxT
# gBMtdw//U2NbmnmECa0uXuE7fdFul0tUkl2oHb9Cr8g5Se5g/HVFqexAKOFZ8Lcm
# DvTl94zJ2dms4RntcmJHwTIusa+oU6qqOekediotjgpeH4BHZNCOHe0E9hIAHn9F
# uoJ1P186L7VeVr7OFAAgSCE7F6egCk7iC0h8L8/vuL4xcuyfbZ2r7ybiTl1+45N2
# YBBv5/00wsYnyMeqRYYtyqgX9QR017JRqNSfTJSbKxhQM/L1GA1xxisUvIGeyDqc
# Pn8E3dMN6sscR6bPs4RP+SBi0JIlRCgth/jteSUkbYf42osw3/5sl4oK/e6Xiogo
# SjELOF7QJNxE8H6EUIScDaCVB5ZhvELZcuOL2NRdUuVDkjhWXM633HwfEcXkZdFK
# W/H9wOvNxPAJIOGXOpv10+MLmhdyIOZwE0uk6evHvdcTn3FP9DurdUCc1se0zKOA
# Qg/H6usTbLGNQ7KKTNQ6GpQ6u89iE1CIyZqYVvB1YuF5t7vtAmxvNk3SVZ6aq3VL
# lPJW2Zd1eO09Q+kRnBVDV7MV4OJrRNsU+ryd91NrSVo9aLADtyiNC28dCSkjU3Gn
# 6YQZt65zHuhH5IBB/PGIPo7dLRT8KNWOiYVoy3c6p6DC6oXsKIibh0ue1nrVnnVQ
# NRqyxPYaj6P8zzqwTk+iJj36UXZZVtqPIhtRu9MrO6Opl2AbsXI=
# =pM6B
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 18 Jul 2024 12:09:11 PM AEST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013

* tag 'pull-riscv-to-apply-20240718-1' of https://github.com/alistair23/qemu: (30 commits)
roms/opensbi: Update to v1.5
hw/riscv/virt.c: re-insert and deprecate 'riscv,delegate'
target/riscv: raise an exception when CSRRS/CSRRC writes a read-only CSR
target/riscv: Expose the Smcntrpmf config
target/riscv: Do not setup pmu timer if OF is disabled
target/riscv: More accurately model priv mode filtering.
target/riscv: Start counters from both mhpmcounter and mcountinhibit
target/riscv: Enforce WARL behavior for scounteren/hcounteren
target/riscv: Save counter values during countinhibit update
target/riscv: Implement privilege mode filtering for cycle/instret
target/riscv: Only set INH fields if priv mode is available
target/riscv: Add cycle & instret privilege mode filtering support
target/riscv: Add cycle & instret privilege mode filtering definitions
target/riscv: Add cycle & instret privilege mode filtering properties
target/riscv: Fix the predicate functions for mhpmeventhX CSRs
target/riscv: Combine set_mode and set_virt functions.
target/riscv/kvm: update KVM regs to Linux 6.10-rc5
disas/riscv: Add decode for Zawrs extension
target/riscv: Validate the mode in write_vstvec
disas/riscv: Support zabha disassemble
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

target/riscv: raise an exception when CSRRS/CSRRC writes a read-only CSR

Both CSRRS and CSRRC always read the addressed CSR and cause any read side
effects regardless of rs1 and rd fields. Note that

target/riscv: raise an exception when CSRRS/CSRRC writes a read-only CSR

Both CSRRS and CSRRC always read the addressed CSR and cause any read side
effects regardless of rs1 and rd fields. Note that if rs1 specifies a register
holding a zero value other than x0, the instruction will still attempt to write
the unmodified value back to the CSR and will cause any attendant side effects.

So if CSRRS or CSRRC tries to write a read-only CSR with rs1 which specifies
a register holding a zero value, an illegal instruction exception should be
raised.

Signed-off-by: Yu-Ming Chang <yumin686@andestech.com>
Signed-off-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <172100444279.18077.6893072378718059541-0@git.sr.ht>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

target/riscv: Save counter values during countinhibit update

Currently, if a counter monitoring cycle/instret is stopped via
mcountinhibit we just update the state while the value is saved
during th

target/riscv: Save counter values during countinhibit update

Currently, if a counter monitoring cycle/instret is stopped via
mcountinhibit we just update the state while the value is saved
during the next read. This is not accurate as the read may happen
many cycles after the counter is stopped. Ideally, the read should
return the value saved when the counter is stopped.

Thus, save the value of the counter during the inhibit update
operation and return that value during the read if corresponding bit
in mcountihibit is set.

Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-8-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

target/riscv: Implement privilege mode filtering for cycle/instret

Privilege mode filtering can also be emulated for cycle/instret by
tracking host_ticks/icount during each privilege mode switch. Th

target/riscv: Implement privilege mode filtering for cycle/instret

Privilege mode filtering can also be emulated for cycle/instret by
tracking host_ticks/icount during each privilege mode switch. This
patch implements that for both cycle/instret and mhpmcounters. The
first one requires Smcntrpmf while the other one requires Sscofpmf
to be enabled.

The cycle/instret are still computed using host ticks when icount
is not enabled. Otherwise, they are computed using raw icount which
is more accurate in icount mode.

Co-Developed-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-7-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

target/riscv: Add cycle & instret privilege mode filtering definitions

This adds the definitions for ISA extension smcntrpmf.

Signed-off-by: Kaiwen Xue <kaiwenx@rivosinc.com>
Reviewed-by: Daniel He

target/riscv: Add cycle & instret privilege mode filtering definitions

This adds the definitions for ISA extension smcntrpmf.

Signed-off-by: Kaiwen Xue <kaiwenx@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-4-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

target/riscv: Combine set_mode and set_virt functions.

Combining riscv_cpu_set_virt_enabled() and riscv_cpu_set_mode()
functions. This is to make complete mode change information
available through a

target/riscv: Combine set_mode and set_virt functions.

Combining riscv_cpu_set_virt_enabled() and riscv_cpu_set_mode()
functions. This is to make complete mode change information
available through a single function.

This allows to easily differentiate between HS->VS, VS->HS
and VS->VS transitions when executing state update codes.
For example: One use-case which inspired this change is
to update mode-specific instruction and cycle counters
which requires information of both prev mode and current
mode.

Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240711-smcntrpmf_v7-v8-1-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge tag 'pull-riscv-to-apply-20240627-1' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.1

* Extend virtual irq csrs masks to be 64 bit wide
* Move Guest irqs out of the core l

Merge tag 'pull-riscv-to-apply-20240627-1' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.1

* Extend virtual irq csrs masks to be 64 bit wide
* Move Guest irqs out of the core local irqs range
* zvbb implies zvkb
* virt: add address-cells in create_fdt_one_aplic()
* virt: add aplic nodename helper
* virt: rename aplic nodename to 'interrupt-controller'
* virt: aplic DT: add 'qemu, aplic' to 'compatible'
* virt: aplic DT: rename prop to 'riscv, delegation'
* virt: change imsic nodename to 'interrupt-controller'
* virt: imsics DT: add 'qemu, imsics' to 'compatible'
* virt: imsics DT: add '#msi-cells'
* QEMU support for KVM Guest Debug on RISC-V
* Support RISC-V privilege 1.13 spec
* Add support for RISC-V ACPI tests
* Modularize common match conditions for trigger

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmZ9OCEACgkQr3yVEwxT
# gBM6aRAApE7Cjo6U1MrcXywh897DnMV9TT9a0jWxhw659eOSk8Uo8mXNNmGSudcl
# +//jIQr/JB5YVDcnFAGWFDaMMev2hkbXG68IaLsfqA32CWZzrOgFpFP+sgicDKmP
# A+P/z0CL332hDRxlhglbIYukCN1bEjWbUDgZaXPVc7ieMM0mwDyFZt7jH65dNmNg
# HpmVcUSooUx8weHOKp0vCKCBcQ6neahjvweTYszsWjXgu51+VrpoSAAds98HHY9H
# vilbTGtJzGEmnfTCmm1GmRn5/g5iQzDKDge+Kg+OzINEfoOBByJerK27sGNRkzxt
# ZNUd0RM2q1wkfZ3XfLU3qEnxHson8SQp2+VYTqnEv3TdR0AjrnsxL7IUuFm+iTv4
# wG3IqBwt+efdAzc9k+K2smCyp3036HNrJHQSyhtxu+yU36K+jBKVq++pRzgOFTvl
# 87VvNI/dYL4hSJ4yS00ti2axl6GNEAEePHwQ0fRXvEdSGc4vOw3ayDqyqF0Gcy9+
# MJq+nV7BX9pEyTRZEKqTi2nB7xh3kq0e+mev2ByQlracBqHIayXC3DsDvPcUbiwJ
# 8bzX28kl5C28vYUVJjzYQgZy2XXGbbsnv3ifah4hi2NJESmYHN0uxs9raW9i+lhR
# 2FAm+eO6mxuJTIH/NTou+msxZJw2jTPLkYdG2e5UkTjUN7JKGnk=
# =bag2
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 27 Jun 2024 03:00:01 AM PDT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013

* tag 'pull-riscv-to-apply-20240627-1' of https://github.com/alistair23/qemu: (32 commits)
target/riscv: Apply modularized matching conditions for icount trigger
target/riscv: Apply modularized matching conditions for watchpoint
target/riscv: Add functions for common matching conditions of trigger
target/riscv: Remove extension auto-update check statements
target/riscv: Add Zc extension implied rule
target/riscv: Add multi extension implied rules
target/riscv: Add MISA extension implied rules
target/riscv: Introduce extension implied rule helpers
target/riscv: Introduce extension implied rules definition
target/riscv: fix instructions count handling in icount mode
target/riscv: Fix froundnx.h nanbox check
hw/riscv/virt.c: Make block devices default to virtio
target/riscv: Support the version for ss1p13
target/riscv: Reserve exception codes for sw-check and hw-err
target/riscv: Add MEDELEGH, HEDELEGH csrs for RV32
target/riscv: Add 'P1P13' bit in SMSTATEEN0
target/riscv: Define macros and variables for ss1p13
target/riscv: Reuse the conversion function of priv_spec
target/riscv/kvm: define TARGET_KVM_HAVE_GUEST_DEBUG
target/riscv/kvm: handle the exit with debug reason
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

target/riscv: Introduce extension implied rules definition

RISCVCPUImpliedExtsRule is created to store the implied rules.
'is_misa' flag is used to distinguish whether the rule is derived
from the M

target/riscv: Introduce extension implied rules definition

RISCVCPUImpliedExtsRule is created to store the implied rules.
'is_misa' flag is used to distinguish whether the rule is derived
from the MISA or other extensions.
'ext' stores the MISA bit if 'is_misa' is true. Otherwise, it stores
the offset of the extension defined in RISCVCPUConfig. 'ext' will also
serve as the key of the hash tables to look up the rule in the following
commit.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com>
Tested-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240625114629.27793-2-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

target/riscv: Define macros and variables for ss1p13

Add macros and variables for RISC-V privilege 1.13 support.

Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@

target/riscv: Define macros and variables for ss1p13

Add macros and variables for RISC-V privilege 1.13 support.

Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Weiwei Li <liwei1518@gmail.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240606135454.119186-3-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

target/riscv: Reuse the conversion function of priv_spec

Public the conversion function of priv_spec in cpu.h, so that tcg-cpu.c
could also use it.

Signed-off-by: Jim Shu <jim.shu@sifive.com>
Signe

target/riscv: Reuse the conversion function of priv_spec

Public the conversion function of priv_spec in cpu.h, so that tcg-cpu.c
could also use it.

Signed-off-by: Jim Shu <jim.shu@sifive.com>
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240606135454.119186-2-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge tag 'hw-misc-accel-20240604' of https://github.com/philmd/qemu into staging

Misc HW & accelerators patch queue

- Use async exit in debugexit model (Thomas)
- Fixed bug reading xlnx_dpdma desc

Merge tag 'hw-misc-accel-20240604' of https://github.com/philmd/qemu into staging

Misc HW & accelerators patch queue

- Use async exit in debugexit model (Thomas)
- Fixed bug reading xlnx_dpdma descriptor (Peter)
- Initialise plugin state before vCPU/thread creation (Alex)
- Few sprintf() calls removed (Richard & Philippe)
- Few deprecated QMP events removed (Philippe)
- Housekeeping in Xen (Edgar & Philippe)
- Split USB HID/HUB & update MAINTAINERS (Gerd)

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmZe5FMACgkQ4+MsLN6t
# wN5QghAAl1j5++wKcJaWoribnhxYctcBPhg3eEAwg2qVRbx5tz7HwYw8jYp+qB47
# abAtE3WOUg+Z+NaBi0bTj8Ns0wrBTZy0toJrQb+k5M9CzJJIFSURcFV2J40ORld8
# VHNKmzNN+ZscxAW3fSFruJlGLaskwB0bk9VF0cYSip2Y+xjbPlJZ8dlffX/HAvwB
# Ul4gJW04FT3k6KoeJASNiAMm7mPW9iP4kY7rKz+j+NWydAfl8yPzxFwW6J6U2npi
# Hvmy1519W74cftZSqxkBETtbw1YVKyT6QEA9HjJOjc05E6UYnxoR13taEzLNaDHA
# B7Xhp6IUYZGRD1bt85WZCP5t5yUINLgmzJU2OQnv9dfU1HdSkk0FQiBr0Iif3tCI
# /2cQumkGI4etXX77oVIwkioo0ZTvEggDNsN1eKHIY7yIE5etqXduPwnTfwHFI3lv
# Nj18MGF0cftbYDEbUwNUnN5U6+msW3Si6hQaUxpUWXy7Idkl9pBiWjv1OpBg9PqX
# YIuw9/USs7i8yZkh0/q8UcZxdzB3LF+LxjVVVoTVD6t+KbRSkJSOJm7hfqCKuXbC
# lEmtLt+aH/pdZ2Banug1Ayen2L7s0czRHQWC++DfNQve1xEUkSFp5VE0mxsr+6Rp
# 18/dSGo++Nh52jUt2QFEv9LyAAQCKxg72I9DW9sB7uC004+ub84=
# =xcID
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 04 Jun 2024 04:54:27 AM CDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]

* tag 'hw-misc-accel-20240604' of https://github.com/philmd/qemu: (32 commits)
usb: add config options for the hub and hid devices
qga: Remove deprecated 'blacklist' argument / config key
trace: Remove deprecated 'vcpu' field from QMP trace events
hw/acpi: Remove the deprecated QAPI MEM_UNPLUG_ERROR event
hw/dma/xlnx_dpdma: Read descriptor into buffer, not into pointer-to-buffer
hw/misc/debugexit: use runstate API instead of plain exit()
hw/xen: Register framebuffer backend via xen_backend_init()
hw/xen: Make XenDevOps structures const
hw/xen: Constify xenstore_be::XenDevOps
hw/xen: Constify XenLegacyDevice::XenDevOps
physmem: Replace check for RAMBlock offset 0 with xen_mr_is_memory
physmem: Always pass offset + addr to xen_map_cache
xen: Add xen_mr_is_memory()
core/cpu-common: initialise plugin state before thread creation
plugins: remove special casing for cpu->realized
cpu-target: don't set cpu->thread_id to bogus value
cpu: move Qemu[Thread|Cond] setup into common code
hw/core: expand on the alignment of CPUState
accel/kvm: Fix two lines with hard-coded tabs
accel/tcg: Move common declarations to 'internal-common.h'
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

target/riscv: Restrict riscv_cpu_do_interrupt() to sysemu

riscv_cpu_do_interrupt() is not reachable on user emulation.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel

target/riscv: Restrict riscv_cpu_do_interrupt() to sysemu

riscv_cpu_do_interrupt() is not reachable on user emulation.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230626232007.8933-7-philmd@linaro.org>

show more ...

Merge tag 'pull-riscv-to-apply-20240603' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.1

* APLICs add child earlier than realize
* Fix exposure of Zkr
* Raise exceptions on wrs

Merge tag 'pull-riscv-to-apply-20240603' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.1

* APLICs add child earlier than realize
* Fix exposure of Zkr
* Raise exceptions on wrs.nto
* Implement SBI debug console (DBCN) calls for KVM
* Support 64-bit addresses for initrd
* Change RISCV_EXCP_SEMIHOST exception number to 63
* Tolerate KVM disable ext errors
* Set tval in breakpoints
* Add support for Zve32x extension
* Add support for Zve64x extension
* Relax vector register check in RISCV gdbstub
* Fix the element agnostic Vector function problem
* Fix Zvkb extension config
* Implement dynamic establishment of custom decoder
* Add th.sxstatus CSR emulation
* Fix Zvfhmin checking for vfwcvt.f.f.v and vfncvt.f.f.w instructions
* Check single width operator for vector fp widen instructions
* Check single width operator for vfncvt.rod.f.f.w
* Remove redudant SEW checking for vector fp narrow/widen instructions
* Prioritize pmp errors in raise_mmu_exception()
* Do not set mtval2 for non guest-page faults
* Remove experimental prefix from "B" extension
* Fixup CBO extension register calculation
* Fix the hart bit setting of AIA
* Fix reg_width in ricsv_gen_dynamic_vector_feature()
* Decode all of the pmpcfg and pmpaddr CSRs

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmZdVzcACgkQr3yVEwxT
# gBPxSBAAsuzhDCbaOl9jXhIL6Q0IDHULz4U16AZypHYID7T6rDaNoRmNVdqBKZuM
# IMby8qm5XFmcUGM9itcM7IKV2BNHuWSye3/Y7GOYZQyToR7U6lvLpAm4pNj4AgTC
# PLV2VPt1XLZRSthkgwp6ylBXzdNSiZMWggqTb7QbyfR5hJfG+VsZjTGaIwyZbtKI
# +CJG6gZSPv6JGNtwnJq+v0VBEkj1ryo/gg2EAAzA+EWU4nw5mJCLWoDLrYZalTv9
# vCTqJuMViTjeHqAm/IIMoFzYR94+ug0usqcmnx/E7ALTOsmBh5K+KWndAW4vqAlP
# mZOONfr3h7zc81jThC961kjGVPiTjTGbHHlKwlB2JEggwctcVqGRyWeM9wHSUr2W
# S6F56hpForzVW9IkCt/fDUxamr23303s5miIsronrwiihqkNpxKYAuqPTXFGkFKg
# ilBLGcbHcWxNmjpfIEXnTjDB6qFEceWqbjJejrsKusoSPkKQm0ktIZZUwCbTsu45
# 0ScYrBieUPjDWDFYlmWrr5byekyCXCzfpBgq8qo60FA+aP29Nx+GlFR0eWTXXY4V
# O5/WTKjQM4+/uNYIuFDCFPV1Ja5GERDhXoNkjkY5ErsSZL2c2UEp3UTxzbEl5dOm
# NRH7C26Z/xVMDwT08kDDq0t8Rkz4836txPO7y+aPbtvGfENRI8E=
# =mtVb
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 03 Jun 2024 12:40:07 AM CDT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013

* tag 'pull-riscv-to-apply-20240603' of https://github.com/alistair23/qemu: (27 commits)
disas/riscv: Decode all of the pmpcfg and pmpaddr CSRs
riscv, gdbstub.c: fix reg_width in ricsv_gen_dynamic_vector_feature()
target/riscv/kvm.c: Fix the hart bit setting of AIA
target/riscv: rvzicbo: Fixup CBO extension register calculation
target/riscv: Remove experimental prefix from "B" extension
target/riscv: do not set mtval2 for non guest-page faults
target/riscv: prioritize pmp errors in raise_mmu_exception()
target/riscv: rvv: Remove redudant SEW checking for vector fp narrow/widen instructions
target/riscv: rvv: Check single width operator for vfncvt.rod.f.f.w
target/riscv: rvv: Check single width operator for vector fp widen instructions
target/riscv: rvv: Fix Zvfhmin checking for vfwcvt.f.f.v and vfncvt.f.f.w instructions
riscv: thead: Add th.sxstatus CSR emulation
target/riscv: Implement dynamic establishment of custom decoder
target/riscv/cpu.c: fix Zvkb extension config
target/riscv: Fix the element agnostic function problem
target/riscv: Relax vector register check in RISCV gdbstub
target/riscv: Add support for Zve64x extension
target/riscv: Add support for Zve32x extension
trans_privileged.c.inc: set (m|s)tval on ebreak breakpoint
target/riscv/debug: set tval=pc in breakpoint exceptions
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

riscv: thead: Add th.sxstatus CSR emulation

The th.sxstatus CSR can be used to identify available custom extension
on T-Head CPUs. The CSR is documented here:
https://github.com/T-head-Semi/thead-

riscv: thead: Add th.sxstatus CSR emulation

The th.sxstatus CSR can be used to identify available custom extension
on T-Head CPUs. The CSR is documented here:
https://github.com/T-head-Semi/thead-extension-spec/blob/master/xtheadsxstatus.adoc

An important property of this patch is, that the th.sxstatus MAEE field
is not set (indicating that XTheadMae is not available).
XTheadMae is a memory attribute extension (similar to Svpbmt) which is
implemented in many T-Head CPUs (C906, C910, etc.) and utilizes bits
in PTEs that are marked as reserved. QEMU maintainers prefer to not
implement XTheadMae, so we need give kernels a mechanism to identify
if XTheadMae is available in a system or not. And this patch introduces
this mechanism in QEMU in a way that's compatible with real HW
(i.e., probing the th.sxstatus.MAEE bit).

Further context can be found on the list:
https://lists.gnu.org/archive/html/qemu-devel/2024-02/msg00775.html

Reviewed-by: LIU Zhiwei <zhiwe_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-ID: <20240429073656.2486732-1-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...