| /openbmc/openbmc/meta-quanta/meta-gbs/recipes-phosphor/configuration/gbs-yaml-config/ |
| H A D | gbs-ipmi-fru.yaml | 84 /system/chassis/PE0: &ADD_IN_CARD_BOARD_DEFAULTS
109 /system/chassis/PE0/PE0: &ADD_IN_CARD_PRODUCT_DEFAULTS
|
| H A D | gbs-ipmi-fru-properties.yaml | 25 /system/chassis/PE0:
33 /system/chassis/PE0/PE0:
|
| /openbmc/openbmc/meta-quanta/meta-gbs/recipes-gbs/gbs-sysinit/files/ |
| H A D | gbs-sysinit.sh | 194 # Output is the i2c bus number for the PCIE cards on PE0/PE1
195 # i2c-0 -> i2c mux (addr: 0x71) -> PE0/PE1
196 # PE0: channel 0
|
| /openbmc/openbmc/meta-quanta/meta-gbs/recipes-phosphor/gpio/phosphor-gpio-monitor/obmc/gpio/ |
| H A D | gpios-8.conf | 2 #store the PE0 present signal
|
| /openbmc/linux/drivers/scsi/isci/ |
| H A D | port_config.c | 154 * -> (PE0), (PE0, PE1), (PE0, PE1, PE2, PE3) LP1 -> (PE1) LP2 -> (PE2), (PE2,
194 * PE0 and PE3 can never have the same SAS Address unless they in sci_port_configuration_agent_validate_ports()
205 * PE0 and PE1 are configured into a 2x1 ports make sure that the in sci_port_configuration_agent_validate_ports()
206 * SAS Address for PE0 and PE2 are different since they can not be in sci_port_configuration_agent_validate_ports()
|
| /openbmc/openbmc/meta-quanta/meta-gbs/recipes-gbs/gbs-ipmi-entity-association-map/files/ |
| H A D | entity_association_map.json | 15 {"instance": 0, "name": "/PE0"},
|
| /openbmc/openbmc/meta-fii/meta-kudo/recipes-kudo/kudo-system/kudo-entity-association-map/ |
| H A D | kudo_entity_association_map.json | 12 {"instance": 3, "name": "/PE0"},
|
| /openbmc/linux/Documentation/devicetree/bindings/pinctrl/ |
| H A D | nvidia,tegra234-pinmux-common.yaml | 37 eth1, dp, eth3, i2c4, i2c7, i2c9, eqos, pe2, pe1, pe0, pe3,
|
| H A D | nvidia,tegra210-pinmux.yaml | 88 i2s5a, i2s5b, iqc0, iqc1, jtag, pe, pe0, pe1, pmi, pwm0,
|
| H A D | nvidia,tegra124-pinmux.yaml | 112 pe0, pe, pe1, dp, rtck, sys, clk, tmds, csi, dsi_b ]
|
| H A D | nvidia,tegra194-pinmux.yaml | 38 nv, pe0, pe1, pe2, pe3, pe4, pe5, qspi, qspi0, qspi1, rsvd0,
|
| /openbmc/u-boot/arch/arm/mach-tegra/tegra210/ |
| H A D | pinmux.c | 41 PIN(PEX_L0_RST_N_PA0, PE0, RSVD1, RSVD2, RSVD3),
42 PIN(PEX_L0_CLKREQ_N_PA1, PE0, RSVD1, RSVD2, RSVD3),
|
| /openbmc/u-boot/arch/arm/mach-tegra/tegra124/ |
| H A D | pinmux.c | 271 PIN(PEX_L0_RST_N_PDD1, PE0, RSVD2, RSVD3, RSVD4),
272 PIN(PEX_L0_CLKREQ_N_PDD2, PE0, RSVD2, RSVD3, RSVD4),
|
| /openbmc/u-boot/board/nvidia/p2371-0000/ |
| H A D | pinmux-config-p2371-0000.h | 89 PINCFG(PEX_L0_RST_N_PA0, PE0, NORMAL, NORMAL, OUTPUT, DISABLE, HIGH),
90 PINCFG(PEX_L0_CLKREQ_N_PA1, PE0, NORMAL, NORMAL, INPUT, DISABLE, HIGH),
|
| /openbmc/u-boot/board/nvidia/e2220-1170/ |
| H A D | pinmux-config-e2220-1170.h | 98 PINCFG(PEX_L0_RST_N_PA0, PE0, NORMAL, NORMAL, OUTPUT, DISABLE, NORMAL),
99 PINCFG(PEX_L0_CLKREQ_N_PA1, PE0, UP, NORMAL, INPUT, DISABLE, NORMAL),
|
| /openbmc/u-boot/arch/arm/include/asm/arch-sunxi/ |
| H A D | gpio.h | 17 * PD0 - PD27 | PE0 - PE31 | PF0 - PF5
|
| /openbmc/u-boot/board/nvidia/p2371-2180/ |
| H A D | pinmux-config-p2371-2180.h | 100 PINCFG(PEX_L0_RST_N_PA0, PE0, NORMAL, NORMAL, OUTPUT, DISABLE, HIGH),
101 PINCFG(PEX_L0_CLKREQ_N_PA1, PE0, NORMAL, NORMAL, INPUT, DISABLE, HIGH),
|
| /openbmc/u-boot/board/nvidia/jetson-tk1/ |
| H A D | pinmux-config-jetson-tk1.h | 260 PINCFG(PEX_L0_RST_N_PDD1, PE0, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
261 PINCFG(PEX_L0_CLKREQ_N_PDD2, PE0, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT),
|
| /openbmc/u-boot/board/cei/cei-tk1-som/ |
| H A D | pinmux-config-cei-tk1-som.h | 252 PINCFG(PEX_L0_RST_N_PDD1, PE0, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
253 PINCFG(PEX_L0_CLKREQ_N_PDD2, PE0, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT),
|
| /openbmc/linux/arch/arm/boot/dts/allwinner/ |
| H A D | suniv-f1c100s.dtsi | 207 pins = "PE0", "PE1";
|
| /openbmc/linux/arch/riscv/boot/dts/allwinner/ |
| H A D | sunxi-d1s-t113.dtsi | 110 pins = "PE0", "PE1", "PE2", "PE3", "PE4",
118 pins = "PE0", "PE1", "PE2", "PE3", "PE4",
|
| /openbmc/linux/drivers/pinctrl/tegra/ |
| H A D | pinctrl-tegra210.c | 220 PINCTRL_PIN(TEGRA_PIN_DMIC1_CLK_PE0, "DMIC1_CLK PE0"),
1224 FUNCTION(pe0),
1366 …PINGROUP(pex_l0_rst_n_pa0, PE0, RSVD1, RSVD2, RSVD3, 0x3038, N, N, Y, Y,…
1367 …PINGROUP(pex_l0_clkreq_n_pa1, PE0, RSVD1, RSVD2, RSVD3, 0x303c, N, N, Y, Y,…
|
| H A D | pinctrl-tegra124.c | 1656 FUNCTION(pe0),
1973 …PINGROUP(pex_l0_rst_n_pdd1, PE0, RSVD2, RSVD3, RSVD4, 0x33bc, N, N…
1974 …PINGROUP(pex_l0_clkreq_n_pdd2, PE0, RSVD2, RSVD3, RSVD4, 0x33c0, N, N…
|
| /openbmc/linux/drivers/pinctrl/renesas/ |
| H A D | pfc-shx3.c | 333 PINMUX_GPIO(PE0),
|
| /openbmc/linux/arch/arm64/boot/dts/nvidia/ |
| H A D | tegra210-p2595.dtsi | 16 nvidia,function = "pe0";
25 nvidia,function = "pe0";
|