/openbmc/linux/arch/arm/boot/dts/marvell/ |
H A D | mmp2-olpc-xo-1-75.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT 8 /dts-v1/; 10 #include <dt-bindings/gpio/gpio.h> 11 #include <dt-bindings/input/linux-event-codes.h> 12 #include <dt-bindings/interrupt-controller/irq.h> 13 #include <dt-bindings/clock/marvell,mmp2-audio.h> 16 model = "OLPC XO-1.75"; 17 compatible = "olpc,xo-1.75", "mrvl,mmp2"; 20 #address-cells = <1>; 21 #size-cells = <1>; [all …]
|
H A D | kirkwood-sheevaplug.dts | 1 // SPDX-License-Identifier: GPL-2.0 3 * kirkwood-sheevaplug.dts - Device tree file for Sheevaplug 8 /dts-v1/; 10 #include "kirkwood-sheevaplug-common.dtsi" 14 compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; 18 pinctrl-0 = <&pmx_sdio>; 19 pinctrl-names = "default"; 21 /* No CD or WP GPIOs */ 22 broken-cd; 26 gpio-leds { [all …]
|
H A D | armada-388-gp.dts | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 4 * (RD-88F6820-GP) 8 * Gregory CLEMENT <gregory.clement@free-electrons.com> 11 /dts-v1/; 12 #include "armada-388.dtsi" 13 #include <dt-bindings/gpio/gpio.h> 16 model = "Marvell Armada 388 DB-88F6820-GP"; 17 compatible = "marvell,a388-gp", "marvell,armada388", "marvell,armada380"; 20 stdout-path = "serial0:115200n8"; 35 internal-regs { [all …]
|
H A D | kirkwood-dreamplug.dts | 1 // SPDX-License-Identifier: GPL-2.0 2 /dts-v1/; 5 #include "kirkwood-6281.dtsi" 9 …compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f628… 18 stdout-path = &uart0; 22 pinctrl: pin-controller@10000 { 23 pmx_led_bluetooth: pmx-led-bluetooth { 27 pmx_led_wifi: pmx-led-wifi { 31 pmx_led_wifi_ap: pmx-led-wifi-ap { 44 #address-cells = <1>; [all …]
|
H A D | armada-xp-db-dxbc2.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 * Device Tree file for DB-DXBC2 board 7 * Based on armada-xp-db.dts 12 * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier 19 /dts-v1/; 20 #include "armada-xp-98dx4251.dtsi" 24 compatible = "marvell,db-dxbc2", "marvell,armadaxp-98dx4251", "marvell,armada-370-xp"; 43 devbus,bus-width = <16>; 44 devbus,turn-off-ps = <60000>; 45 devbus,badr-skew-ps = <0>; [all …]
|
/openbmc/linux/arch/arm64/boot/dts/allwinner/ |
H A D | sun50i-a64-pine64-lts.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 4 #include <dt-bindings/leds/common.h> 5 #include "sun50i-a64-sopine-baseboard.dts" 9 compatible = "pine64,pine64-lts", "allwinner,sun50i-r18", 10 "allwinner,sun50i-a64"; 13 compatible = "gpio-leds"; 24 broken-cd; /* card detect is broken on *some* boards */
|
/openbmc/linux/arch/arm64/boot/dts/amlogic/ |
H A D | meson-axg-jethome-jethub-j110-rev-3.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 8 /dts-v1/; 10 #include "meson-axg-jethome-jethub-j1xx.dtsi" 13 compatible = "jethome,jethub-j110", "amlogic,a113d", "amlogic,meson-axg"; 26 broken-cd;/* cd-gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;*/
|
H A D | meson-axg-jethome-jethub-j110-rev-2.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 8 /dts-v1/; 10 #include "meson-axg-jethome-jethub-j1xx.dtsi" 13 compatible = "jethome,jethub-j110", "amlogic,a113d", "amlogic,meson-axg"; 26 broken-cd;/* cd-gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;*/ 32 compatible = "realtek,rtl8822cs-bt"; 33 enable-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>; 34 host-wake-gpios = <&gpio GPIOZ_8 GPIO_ACTIVE_HIGH>; 35 device-wake-gpios = <&gpio GPIOZ_6 GPIO_ACTIVE_HIGH>;
|
/openbmc/u-boot/arch/arm/dts/ |
H A D | kirkwood-sheevaplug.dts | 1 // SPDX-License-Identifier: GPL-2.0 3 * kirkwood-sheevaplug.dts - Device tree file for Sheevaplug 8 /dts-v1/; 10 #include "kirkwood-sheevaplug-common.dtsi" 14 compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; 18 pinctrl-0 = <&pmx_sdio>; 19 pinctrl-names = "default"; 21 /* No CD or WP GPIOs */ 22 broken-cd; 26 gpio-leds { [all …]
|
H A D | socfpga_arria5.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 6 /dts-v1/; 16 clock-frequency = <25000000>; 22 broken-cd; 23 bus-width = <4>; 24 cap-mmc-highspeed; 25 cap-sd-highspeed; 29 cpu1-start-addr = <0xffd080c4>;
|
H A D | socfpga_cyclone5.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ 6 /dts-v1/; 16 clock-frequency = <25000000>; 22 broken-cd; 23 bus-width = <4>; 24 cap-mmc-highspeed; 25 cap-sd-highspeed; 29 cpu1-start-addr = <0xffd080c4>;
|
H A D | kirkwood-dreamplug.dts | 1 // SPDX-License-Identifier: GPL-2.0 2 /dts-v1/; 5 #include "kirkwood-6281.dtsi" 9 …compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f628… 18 stdout-path = &uart0; 26 pinctrl: pin-controller@10000 { 27 pmx_led_bluetooth: pmx-led-bluetooth { 31 pmx_led_wifi: pmx-led-wifi { 35 pmx_led_wifi_ap: pmx-led-wifi-ap { 48 #address-cells = <1>; [all …]
|
/openbmc/linux/tools/perf/tests/ |
H A D | perf-targz-src-pkg | 2 # SPDX-License-Identifier: GPL-2.0 7 # be in such tarball, which sometimes gets broken when we move files around, 10 set -e 13 cd ${PERF}/../.. 14 make perf-targz-src-pkg 15 TARBALL=$(ls -rt perf-*.tar.gz) 16 TMP_DEST=$(mktemp -d) 17 tar xf ${TARBALL} -C $TMP_DEST 18 rm -f ${TARBALL} 19 cd - > /dev/null [all …]
|
/openbmc/linux/arch/arm/boot/dts/st/ |
H A D | stm32mp157a-iot-box.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 /dts-v1/; 7 #include "stm32mp157a-stinger96.dtsi" 11 compatible = "shiratech,stm32mp157a-iot-box", "st,stm32mp157"; 13 wlan_pwr: regulator-wlan { 14 compatible = "regulator-fixed"; 16 regulator-name = "wl-reg"; 17 regulator-min-microvolt = <3300000>; 18 regulator-max-microvolt = <3300000>; 21 enable-active-high; [all …]
|
H A D | stm32h750i-art-pi.dts | 2 * Copyright 2021 - Dillon Min <dillon.minfei@gmail.com> 4 * This file is dual-licensed: you can use it either under the terms 42 * For art-pi board resources, you can refer to link: 43 * https://art-pi.gitee.io/website/ 46 /dts-v1/; 48 #include "stm32h7-pinctrl.dtsi" 49 #include <dt-bindings/interrupt-controller/irq.h> 50 #include <dt-bindings/gpio/gpio.h> 53 model = "RT-Thread STM32H750i-ART-PI board"; 54 compatible = "st,stm32h750i-art-pi", "st,stm32h750"; [all …]
|
/openbmc/openbmc/poky/meta/recipes-devtools/gcc/ |
H A D | gcc-sanitizers.inc | 1 require gcc-configure-common.inc 10 --with-sysroot=/not/exist \ 11 --with-build-sysroot=${STAGING_DIR_TARGET} \ 14 # Workaround for this issue: https://github.com/llvm/llvm-project/issues/65144 on aarch64 15 # compiler-rt/sanitizers/aarch64: CHECK failed: sanitizer_allocator_primary64.h:133 16 CXXFLAGS:append:aarch64 = " -DSANITIZER_CAN_USE_ALLOCATOR64=0" 19 rm -rf ${B}/${TARGET_SYS}/libsanitizer/ 20 mkdir -p ${B}/${TARGET_SYS}/libsanitizer/ 21 cd ${B}/${TARGET_SYS}/libsanitizer/ 26 # broken libtool here [all …]
|
H A D | libgfortran.inc | 1 require gcc-configure-common.inc 4 --with-sysroot=/not/exist \ 5 --with-build-sysroot=${STAGING_DIR_TARGET} \ 11 …TRAN = "${FC} -fcanon-prefix-map -fdebug-prefix-map=${S}=${TARGET_DBGSRC_DIR} -fdebug-prefix-map=$… 16 rm -rf ${B}/${TARGET_SYS}/$target/ 17 mkdir -p ${B}/${TARGET_SYS}/$target/ 18 cd ${B}/${TARGET_SYS}/$target/ 23 # broken libtool here 24 sed -i -e 's/hardcode_into_libs=yes/hardcode_into_libs=no/' ${B}/${TARGET_SYS}/$target/libtool 33 cd ${B}/${TARGET_SYS}/$target/ [all …]
|
/openbmc/linux/arch/arm/boot/dts/allwinner/ |
H A D | sun5i-a13-licheepi-one.dts | 4 * Based on sun5i-a13-olinuxino.dts, which is 5 * Copyright 2012 Maxime Ripard <maxime.ripard@free-electrons.com> 8 * This file is dual-licensed: you can use it either under the terms 47 /dts-v1/; 48 #include "sun5i-a13.dtsi" 49 #include "sunxi-common-regulators.dtsi" 51 #include <dt-bindings/gpio/gpio.h> 52 #include <dt-bindings/input/input.h> 56 compatible = "licheepi,licheepi-one", "allwinner,sun5i-a13"; 63 stdout-path = "serial0:115200n8"; [all …]
|
H A D | sun8i-s3-elimo-impetus.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 /dts-v1/; 7 #include "sun8i-v3.dtsi" 8 #include "sunxi-common-regulators.dtsi" 12 compatible = "elimo,impetus", "sochip,s3", "allwinner,sun8i-v3"; 19 stdout-path = "serial0:115200n8"; 24 broken-cd; 25 bus-width = <4>; 26 vmmc-supply = <®_vcc3v3>; 31 pinctrl-0 = <&uart0_pb_pins>; [all …]
|
H A D | sun8i-s3-lichee-zero-plus.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 /dts-v1/; 7 #include "sun8i-v3.dtsi" 9 #include <dt-bindings/gpio/gpio.h> 13 compatible = "sipeed,lichee-zero-plus", "sochip,s3", 14 "allwinner,sun8i-v3"; 21 stdout-path = "serial0:115200n8"; 25 compatible = "regulator-fixed"; 26 regulator-name = "vcc3v3"; 27 regulator-min-microvolt = <3300000>; [all …]
|
/openbmc/linux/arch/arm/boot/dts/intel/socfpga/ |
H A D | socfpga_arria10_socdk_sdmmc.dts | 1 // SPDX-License-Identifier: GPL-2.0+ 3 * Copyright (C) 2014-2015 Altera Corporation <www.altera.com> 6 /dts-v1/; 11 cap-sd-highspeed; 12 cap-mmc-highspeed; 13 broken-cd; 14 bus-width = <4>; 15 clk-phase-sd-hs = <0>, <135>; 19 sdmmca-ecc@ff8c2c00 { 20 compatible = "altr,socfpga-sdmmc-ecc"; [all …]
|
H A D | socfpga_arria5.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 6 /dts-v1/; 16 clock-frequency = <25000000>; 22 broken-cd; 23 bus-width = <4>; 24 cap-mmc-highspeed; 25 cap-sd-highspeed; 26 clk-phase-sd-hs = <0>, <135>; 30 cpu1-start-addr = <0xffd080c4>;
|
H A D | socfpga_cyclone5.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ 6 /dts-v1/; 16 clock-frequency = <25000000>; 22 broken-cd; 23 bus-width = <4>; 24 cap-mmc-highspeed; 25 cap-sd-highspeed; 26 clk-phase-sd-hs = <0>, <135>; 30 cpu1-start-addr = <0xffd080c4>;
|
/openbmc/linux/arch/arm/boot/dts/samsung/ |
H A D | exynos5260-xyref5260.dts | 1 // SPDX-License-Identifier: GPL-2.0 9 /dts-v1/; 27 stdout-path = "serial2:115200n8"; 31 compatible = "fixed-clock"; 32 clock-frequency = <24000000>; 33 clock-output-names = "fin_pll"; 34 #clock-cells = <0>; 37 ioclk_pcm: clock-pcm-ext { 38 compatible = "fixed-clock"; 39 clock-frequency = <2048000>; [all …]
|
/openbmc/linux/drivers/mmc/core/ |
H A D | host.c | 1 // SPDX-License-Identifier: GPL-2.0-only 6 * Copyright (C) 2007-2008 Pierre Ossman 25 #include <linux/mmc/slot-gpio.h> 30 #include "slot-gpio.h" 47 if (!host->bus_ops) in mmc_host_class_prepare() 51 if (host->bus_ops->pre_suspend) in mmc_host_class_prepare() 52 return host->bus_ops->pre_suspend(host); in mmc_host_class_prepare() 77 wakeup_source_unregister(host->ws); in mmc_host_classdev_release() 78 if (of_alias_get_id(host->parent->of_node, "mmc") < 0) in mmc_host_classdev_release() 79 ida_simple_remove(&mmc_host_ida, host->index); in mmc_host_classdev_release() [all …]
|