Home
last modified time | relevance | path

Searched +full:power +full:- +full:over +full:- +full:ethernet (Results 1 – 25 of 281) sorted by relevance

12345678910>>...12

/openbmc/u-boot/drivers/usb/gadget/
H A DKconfig6 # NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!
8 # - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
9 # - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
10 # - Some systems have both kinds of controllers.
12 # With help from a special transceiver and a "Mini-AB" jack, systems with
13 # both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
22 you can't connect a "to-the-host" connector to a peripheral.
24 U-Boot can run in the host, or in the peripheral. In both cases
32 Enable this configuration option if you want to run U-Boot inside
43 CDC-ACM (usbtty) for example.
[all …]
/openbmc/linux/Documentation/devicetree/bindings/net/pse-pd/
H A Dpse-controller.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/net/pse-pd/pse-controller.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Power Sourcing Equipment (PSE).
9 description: Binding for the Power Sourcing Equipment (PSE) as defined in the
11 power over twisted pair/ethernet cable. The ethernet-pse nodes should be
12 used to describe PSE controller and referenced by the ethernet-phy node.
15 - Oleksij Rempel <o.rempel@pengutronix.de>
19 pattern: "^ethernet-pse(@.*|-([0-9]|[1-9][0-9]+))?$"
[all …]
/openbmc/linux/Documentation/networking/dsa/
H A Dbcm_sf2.rst2 Broadcom Starfighter 2 Ethernet switch driver
5 Broadcom's Starfighter 2 Ethernet switch hardware block is commonly found and
8 - xDSL gateways such as BCM63138
9 - streaming/multimedia Set Top Box such as BCM7445
10 - Cable Modem/residential gateways such as BCM7145/BCM3390
13 ports, offering a range of built-in and customizable interfaces:
15 - single integrated Gigabit PHY
16 - quad integrated Gigabit PHY
17 - quad external Gigabit PHY w/ MDIO multiplexer
18 - integrated MoCA PHY
[all …]
/openbmc/ipmitool/doc/
H A Dipmitool.13 ipmitool \- utility for controlling IPMI\-enabled devices
6 ipmitool [ <options> ] <command> [ <sub-commands and sub-options> ]
8 <options> := [ <general-options> | <conditional-opts> ]
13 <general-options> := [ -h | -V | -v | -I <interface> | -H <address> |
14 -d <N> | -p <port> | -c | -U <username> |
15 -L <privlvl> | -l <lun> | -m <local_address> |
16 -N <sec> | -R <count> | <password-option> |
17 <oem-option> | <bridge-options> ]
19 <conditional-opts> := [ <lan-options> | <lanplus-options> |
20 <command-options> ]
[all …]
/openbmc/linux/lib/
H A Dcrc32.c3 * cleaned up code to current version of sparse and added the slicing-by-8
4 * algorithm to the closely similar existing slicing-by-4 algorithm.
9 * subsequently included in the kernel, thus was re-licensed under the
56 /* implements slicing-by-4 or slicing-by-8 algorithm */
88 } while ((--len) && ((long)buf)&3);
101 --b;
104 for (--b; len; --len) {
118 u8 *p = (u8 *)(b + 1) - 1;
125 } while (--len);
137 * crc32_le_generic() - Calculate bitwise little-endian Ethernet AUTODIN II
[all …]
/openbmc/u-boot/board/freescale/ls1021atwr/
H A DREADME2 --------
6 ------------------
8 is built on Layerscape architecture, the industry's first software-aware,
9 core-agnostic networking architecture to offer unprecedented efficiency
12 A member of the value-performance tier, the QorIQ LS1021A processor provides
13 extensive integration and power efficiency for fanless, small form factor
14 enterprise networking applications. Incorporating dual ARM Cortex-A7 cores
15 running up to 1.0 GHz, the LS1021A processor delivers pre-silicon CoreMark
16 performance of over 6,000, as well as virtualization support, advanced
17 security features and the broadest array of high-speed interconnects and
[all …]
/openbmc/linux/Documentation/devicetree/bindings/net/
H A Dti,dp83867.yaml1 # SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
4 ---
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
8 title: TI DP83867 ethernet PHY
11 - $ref: ethernet-controller.yaml#
14 - Andrew Davis <afd@ti.com>
17 The DP83867 device is a robust, low power, fully featured Physical Layer
18 transceiver with integrated PMD sublayers to support 10BASE-Te, 100BASE-TX
19 and 1000BASE-T Ethernet protocols.
21 The DP83867 is designed for easy implementation of 10/100/1000 Mbps Ethernet
[all …]
H A Dti,dp83822.yaml1 # SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
4 ---
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
8 title: TI DP83822 ethernet PHY
11 - Andrew Davis <afd@ti.com>
14 The DP83822 is a low-power, single-port, 10/100 Mbps Ethernet PHY. It
16 data over standard, twisted-pair cables or to connect to an external,
17 fiber-optic transceiver. Additionally, the DP83822 provides flexibility to
20 Specifications about the Ethernet PHY can be found at:
24 - $ref: ethernet-phy.yaml#
[all …]
H A Dsnps,dwc-qos-ethernet.txt1 * Synopsys DWC Ethernet QoS IP version 4.10 driver (GMAC)
6 This binding supports the Synopsys Designware Ethernet QoS (Quality Of Service)
13 - compatible: One of:
14 - "axis,artpec6-eqos", "snps,dwc-qos-ethernet-4.10"
15 Represents the IP core when integrated into the Axis ARTPEC-6 SoC.
16 - "nvidia,tegra186-eqos", "snps,dwc-qos-ethernet-4.10"
18 - "snps,dwc-qos-ethernet-4.10"
20 "axis,artpec6-eqos", "snps,dwc-qos-ethernet-4.10". It is supported to be
22 - reg: Address and length of the register set for the device
23 - clocks: Phandle and clock specifiers for each entry in clock-names, in the
[all …]
/openbmc/u-boot/common/spl/
H A DKconfig25 supports MMC, NAND and YMODEM and other methods loading of U-Boot
29 bool "Pass hand-off information from SPL to U-Boot proper"
32 It is useful to be able to pass information from SPL to U-Boot
33 proper to preserve state that is known in SPL and is needed in U-Boot.
34 Enable this to locate the handoff information in U-Boot proper, early
35 in boot. It is available in gd->handoff. The state state is set up
44 This option can minilize the SPL size to compatible with AST2600-A0
48 bool "Pass hand-off information from SPL to U-Boot proper"
53 used to pass information like the size of SDRAM from SPL to U-Boot
59 default "arch/$(ARCH)/cpu/u-boot-spl.lds"
[all …]
/openbmc/u-boot/board/freescale/ls1021aqds/
H A DREADME2 --------
6 ------------------
8 is built on Layerscape architecture, the industry's first software-aware,
9 core-agnostic networking architecture to offer unprecedented efficiency
12 A member of the value-performance tier, the QorIQ LS1021A processor provides
13 extensive integration and power efficiency for fanless, small form factor
14 enterprise networking applications. Incorporating dual ARM Cortex-A7 cores
15 running up to 1.0 GHz, the LS1021A processor delivers pre-silicon CoreMark
16 performance of over 6,000, as well as virtualization support, advanced
17 security features and the broadest array of high-speed interconnects and
[all …]
/openbmc/linux/Documentation/driver-api/usb/
H A Dgadget.rst11 This document presents a Linux-USB "Gadget" kernel mode API, for use
17 - Supports USB 2.0, for high speed devices which can stream data at
20 - Handles devices with dozens of endpoints just as well as ones with
21 just two fixed-function ones. Gadget drivers can be written so
24 - Flexible enough to expose more complex USB device capabilities such
28 - USB "On-The-Go" (OTG) support, in conjunction with updates to the
29 Linux-USB host side.
31 - Sharing data structures and API models with the Linux-USB host side
32 API. This helps the OTG support, and looks forward to more-symmetric
36 - Minimalist, so it's easier to support new device controller hardware.
[all …]
/openbmc/u-boot/doc/device-tree-bindings/net/
H A Dsnps,dwc-qos-ethernet.txt1 * Synopsys DWC Ethernet QoS IP version 4.10 driver (GMAC)
3 This binding supports the Synopsys Designware Ethernet QoS (Quality Of Service)
10 - compatible: One of:
11 - "axis,artpec6-eqos", "snps,dwc-qos-ethernet-4.10"
12 Represents the IP core when integrated into the Axis ARTPEC-6 SoC.
13 - "nvidia,tegra186-eqos", "snps,dwc-qos-ethernet-4.10"
15 - "snps,dwc-qos-ethernet-4.10"
17 "axis,artpec6-eqos", "snps,dwc-qos-ethernet-4.10". It is supported to be
19 - reg: Address and length of the register set for the device
20 - clocks: Phandle and clock specifiers for each entry in clock-names, in the
[all …]
/openbmc/u-boot/doc/
H A DREADME.b4860qds2 --------
6 -------------
7 The B4860 QorIQ Qonverge device is a Freescale high-end, multicore SoC based on
8 StarCore and Power Architecture® cores. It targets the broadband wireless
10 DSPs and Power CPUs. It is designed to bolster the rapidly changing and
11 expanding wireless markets, such as 3GLTE (FDD and TDD), LTE-Advanced, and UMTS.
13 The B4860 is a highly-integrated StarCore and Power Architecture processor that
15 . Six fully-programmable StarCore SC3900 FVP subsystems, divided into three
16 clusters-each core runs up to 1.2 GHz, with an architecture highly optimized for
18 . Four dual-thread e6500 Power Architecture processors organized in one cluster-each
[all …]
/openbmc/linux/arch/arm64/boot/dts/freescale/
H A Dimx8mp-dhcom-som.dtsi1 // SPDX-License-Identifier: GPL-2.0
3 * Copyright (C) 2021-2022 Marek Vasut <marex@denx.de>
10 compatible = "dh,imx8mp-dhcom-som", "fsl,imx8mp";
22 /* Memory size 512 MiB..8 GiB will be filled by U-Boot */
26 reg_eth_vio: regulator-eth-vio {
27 compatible = "regulator-fixed";
29 pinctrl-0 = <&pinctrl_enet_vio>;
30 pinctrl-names = "default";
31 regulator-always-on;
32 regulator-boot-on;
[all …]
H A Dimx8dxl-evk.dts1 // SPDX-License-Identifier: GPL-2.0+
6 /dts-v1/;
12 compatible = "fsl,imx8dxl-evk", "fsl,imx8dxl";
22 stdout-path = &lpuart0;
30 reserved-memory {
31 #address-cells = <2>;
32 #size-cells = <2>;
37 * This will be automatically added to dtb if OP-TEE is installed.
40 * no-map;
46 compatible = "shared-dma-pool";
[all …]
/openbmc/linux/Documentation/devicetree/bindings/hwmon/
H A Dti,tps23861.yaml1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Robert Marko <robert.marko@sartura.hr>
14 The TPS23861 is a IEEE 802.3at Quad Port Power-over-Ethernet PSE Controller.
23 - ti,tps23861
28 shunt-resistor-micro-ohms:
35 - compatible
36 - reg
41 - |
[all …]
/openbmc/linux/arch/arm/boot/dts/nxp/imx/
H A Dmba6ulx.dtsi1 // SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
3 * Copyright 2018-2022 TQ-Systems GmbH
4 * Author: Markus Niebel <Markus.Niebel@tq-group.com>
8 model = "TQ-Systems MBA6ULx Baseboard";
18 stdout-path = &uart1;
22 compatible = "pwm-backlight";
23 power-supply = <&reg_mba6ul_3v3>;
24 enable-gpios = <&expander_out0 4 GPIO_ACTIVE_HIGH>;
29 compatible = "gpio-beeper";
33 gpio_buttons: gpio-keys {
[all …]
H A Dimx7-colibri-iris-v2.dtsi1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
7 reg_3v3_vmmc: regulator-3v3-vmmc {
8 compatible = "regulator-fixed";
9 enable-active-high;
11 regulator-max-microvolt = <3300000>;
12 regulator-min-microvolt = <3300000>;
13 regulator-name = "3v3_vmmc";
14 startup-delay-us = <100>;
28 /* Colibri Fast Ethernet */
40 uart-b-c-on-x14-enable-hog {
[all …]
H A Dimx6ul-kontron-bl-common.dtsi1 // SPDX-License-Identifier: GPL-2.0
8 #include <dt-bindings/gpio/gpio.h>
11 gpio-leds {
12 compatible = "gpio-leds";
13 pinctrl-names = "default";
14 pinctrl-0 = <&pinctrl_gpio_leds>;
17 label = "debug-led1";
19 default-state = "off";
20 linux,default-trigger = "heartbeat";
24 label = "debug-led2";
[all …]
H A Dimx6ul-ccimx6ulsbcpro.dts1 // SPDX-License-Identifier: GPL-2.0
9 /dts-v1/;
10 #include <dt-bindings/input/input.h>
11 #include <dt-bindings/interrupt-controller/irq.h>
13 #include "imx6ul-ccimx6ulsom.dtsi"
20 compatible = "pwm-backlight";
22 brightness-levels = <0 4 8 16 32 64 128 255>;
23 default-brightness-level = <6>;
29 power-supply = <&ldo4_ext>;
34 remote-endpoint = <&display_out>;
[all …]
/openbmc/linux/Documentation/driver-api/mei/
H A Diamt.rst1 .. SPDX-License-Identifier: GPL-2.0
10 Intel AMT provides the ability to manage a host remotely out-of-band (OOB)
15 - Monitoring hardware state and platform components
16 - Remote power off/on (useful for green computing or overnight IT
18 - OS updates
19 - Storage of useful platform information such as software assets
20 - Built-in hardware KVM
21 - Selective network isolation of Ethernet and IP protocol flows based
23 - IDE device redirection from remote management console
26 starting with Release 6.0) over HTTP/S or WS-Management protocol over
[all …]
/openbmc/linux/drivers/usb/gadget/
H A DKconfig1 # SPDX-License-Identifier: GPL-2.0
7 # NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!
9 # - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
10 # - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
11 # - Some systems have both kinds of controllers.
13 # With help from a special transceiver and a "Mini-AB" jack, systems with
14 # both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
25 you can't connect a "to-the-host" connector to a peripheral.
44 For more information, see <http://www.linux-usb.org/gadget> and
100 int "Maximum VBUS Power usage (2-500 mA)"
[all …]
/openbmc/linux/Documentation/networking/device_drivers/ethernet/stmicro/
H A Dstmmac.rst1 .. SPDX-License-Identifier: GPL-2.0+
4 Linux Driver for the Synopsys(R) Ethernet Controllers "stmmac"
13 - In This Release
14 - Feature List
15 - Kernel Configuration
16 - Command Line Parameters
17 - Driver Information and Notes
18 - Debug Information
19 - Support
24 This file describes the stmmac Linux Driver for all the Synopsys(R) Ethernet
[all …]
/openbmc/linux/Documentation/devicetree/bindings/usb/
H A Dci-hdrc-usb2.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/usb/ci-hdrc-usb2.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Xu Yang <xu.yang_2@nxp.com>
11 - Peng Fan <peng.fan@nxp.com>
16 - enum:
17 - chipidea,usb2
18 - lsi,zevio-usb
19 - nuvoton,npcm750-udc
[all …]

12345678910>>...12