/openbmc/linux/Documentation/devicetree/bindings/regulator/ |
H A D | ltc3676.txt | 9 ldo1, ldo2, ldo3, and ldo4, specifying the initialization data as 13 nodes for sw1, sw2, sw3, sw4, ldo1, ldo2 and ldo4 additionally need to specify 24 Regulators ldo1, ldo2, and ldo4 have a fixed 0.725 V reference and thus output 86 ldo4_reg: ldo4 {
|
H A D | ltc3589.txt | 9 ldo1, ldo2, ldo3, and ldo4, specifying the initialization data as 16 Required properties (not on ldo3, ldo4): 24 regulator is fixed to 1.8 V on LTC3589 and to 2.8 V on LTC3589-1,2. The ldo4 94 ldo4_reg: ldo4 {
|
H A D | nxp,pca9450-regulator.yaml | 22 # LDO1, LDO2, LDO3, LDO4, LDO5 179 ldo4: LDO4 { 180 regulator-name = "LDO4";
|
H A D | pv88060.txt | 11 BUCK1, LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7, SW1, SW2, SW3, SW4, 56 LDO4 { 57 regulator-name = "ldo4";
|
H A D | max8925-regulator.txt | 11 - LDO4 for LDO LDO4
|
H A D | rohm,bd71815-regulator.yaml | 21 ldo1, ldo2, ldo3, ldo4, ldo5, 52 GPIO used to control ldo4 state (when ldo4 is controlled by GPIO).
|
H A D | tps65217.txt | 18 tps65217: dcdc1, dcdc2, dcdc3, ldo1, ldo2, ldo3 and ldo4 71 ldo4_reg: ldo4 {
|
/openbmc/linux/drivers/regulator/ |
H A D | tps65912-regulator.c | 20 LDO4, LDO5, LDO6, LDO7, LDO8, LDO9, LDO10 }; enumerator 94 TPS65912_REGULATOR("LDO4", LDO4, "ldo4", tps65912_ops_ldo,
|
H A D | tps65219-regulator.c | 37 { "LDO4_SCG", "LDO4", "short circuit to ground", REGULATOR_EVENT_REGULATION_OUT }, 38 { "LDO4_OC", "LDO4", "overcurrent", REGULATOR_EVENT_OVER_CURRENT }, 39 { "LDO4_UV", "LDO4", "undervoltage", REGULATOR_EVENT_UNDER_VOLTAGE }, 64 { "LDO4_RV", "LDO4", "residual voltage", REGULATOR_EVENT_OVER_VOLTAGE_WARN }, 74 { "LDO4_RV_SD", "LDO4", "residual voltage on shutdown", REGULATOR_EVENT_OVER_VOLTAGE_WARN }, 262 TPS65219_REGULATOR("LDO4", "ldo4", TPS65219_LDO_4,
|
H A D | max77620-regulator.c | 736 RAIL_LDO(LDO4, ldo4, "in-ldo4-6", P, 800000, 1587500, 12500), 738 RAIL_LDO(LDO6, ldo6, "in-ldo4-6", P, 800000, 3950000, 50000), 754 RAIL_LDO(LDO4, ldo4, "in-ldo4-6", P, 800000, 1587500, 12500), 756 RAIL_LDO(LDO6, ldo6, "in-ldo4-6", P, 800000, 3950000, 50000), 772 RAIL_LDO(LDO4, ldo4, "in-ldo4-6", P, 800000, 1587500, 12500), 774 RAIL_LDO(LDO6, ldo6, "in-ldo4-6", P, 800000, 3950000, 50000),
|
H A D | max8893.c | 88 .name = "LDO4", 89 .supply_name = "in-ldo4", 90 .of_match = of_match_ptr("ldo4"),
|
H A D | tps6594-regulator.c | 151 /* Operations permitted on LDO4 */ 265 { TPS6594_IRQ_NAME_LDO4_OV, "LDO4", "overvoltage", REGULATOR_EVENT_OVER_VOLTAGE_WARN }, 266 { TPS6594_IRQ_NAME_LDO4_UV, "LDO4", "undervoltage", REGULATOR_EVENT_UNDER_VOLTAGE }, 267 { TPS6594_IRQ_NAME_LDO4_SC, "LDO4", "short circuit", REGULATOR_EVENT_REGULATION_OUT }, 268 { TPS6594_IRQ_NAME_LDO4_ILIM, "LDO4", "reach ilim, overcurrent", 340 TPS6594_REGULATOR("LDO4", "ldo4", TPS6594_LDO_4,
|
H A D | qcom-rpmh-regulator.c | 832 RPMH_VREG("ldo4", "ldo%s4", &pmic4_nldo, "vdd-l4-l5"), 894 RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l3-l4-l5-l18"), 924 RPMH_VREG("ldo4", "ldo%s4", &pmic5_pldo, "vdd-l4-l5-l6"), 950 RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l3-l4-l5-l18"), 981 RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo515, "vdd-s9"), 1006 RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l1-l4"), 1030 RPMH_VREG("ldo4", "ldo%s4", &pmic5_pldo, "vdd-l3-l4-l5-l7-l13"), 1054 RPMH_VREG("ldo4", "ldo%s4", &pmic5_pldo_lv, "vdd-l4"), 1062 RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo515, "vdd-l1-l4-l10"), 1115 RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l4"), [all …]
|
/openbmc/linux/arch/arm64/boot/dts/hisilicon/ |
H A D | hikey970-pmic.dtsi | 35 ldo4: ldo4 { /* 40 PIN */ label 36 regulator-name = "ldo4";
|
/openbmc/linux/Documentation/devicetree/bindings/mfd/ |
H A D | hisilicon,hi6421-spmi-pmic.yaml | 90 ldo4: ldo4 { 91 regulator-name = "ldo4";
|
H A D | da9052-i2c.txt | 26 ldo4 : regulator LDO4
|
H A D | ti,tps6594.yaml | 133 ldo4-supply = <&vcc_3v3_sys>; 184 ldo4: ldo4 {
|
H A D | wm831x.txt | 46 ldo4 : LDO4
|
H A D | da9055.txt | 38 ldo4 : regulator LDO4
|
H A D | rohm,bd71828-pmic.yaml | 167 ldo4: LDO4 { 168 regulator-name = "ldo4";
|
H A D | rohm,bd71815-pmic.yaml | 173 ldo4: ldo4 { 174 regulator-name = "ldo4";
|
/openbmc/u-boot/arch/arm/dts/ |
H A D | dra72-evm-tps65917.dtsi | 33 ldo4-in-supply = <&evm_5v0>; 117 ldo4_reg: ldo4 { 119 regulator-name = "ldo4";
|
/openbmc/linux/arch/arm/boot/dts/ti/omap/ |
H A D | dra72-evm-tps65917.dtsi | 30 ldo4-in-supply = <&evm_5v0>; 114 ldo4_reg: ldo4 { 116 regulator-name = "ldo4";
|
/openbmc/linux/arch/arm64/boot/dts/freescale/ |
H A D | imx8mm-emtop-som.dtsi | 140 ldo4: LDO4 { label 141 regulator-name = "LDO4";
|
H A D | imx8mp-debix-som-a.dtsi | 124 ldo4: LDO4 { label 125 regulator-name = "LDO4";
|