/openbmc/linux/Documentation/devicetree/bindings/phy/ |
H A D | microchip,sparx5-serdes.yaml | 35 * 1.25 Gbps (SGMII/1000BASE-X/1000BASE-KX) 36 * 3.125 Gbps (2.5GBASE-X/2.5GBASE-KX) 37 * 5.15625 Gbps (5GBASE-KR/5G-USXGMII) 45 * 1.25 Gbps (SGMII/1000BASE-X/1000BASE-KX) 46 * 3.125 Gbps (2.5GBASE-X/2.5GBASE-KX) 47 * 5 Gbps (QSGMII/USGMII) 48 * 5.15625 Gbps (5GBASE-KR/5G-USXGMII) 49 * 10 Gbps (10G-USGMII) 50 * 10.3125 Gbps (10GBASE-R/10GBASE-KR/USXGMII) 57 * 1.25 Gbps (SGMII/1000BASE-X/1000BASE-KX) [all …]
|
H A D | apm-xgene-phy.txt | 1 * APM X-Gene 15Gbps Multi-purpose PHY nodes 3 PHY nodes are defined to describe on-chip 15Gbps Multi-purpose PHY. Each 48 0 = 1-2Gbps 49 1 = 2-4Gbps (1st tuple default) 50 2 = 4-8Gbps 51 3 = 8-15Gbps (2nd tuple default) 52 4 = 2.5-4Gbps 53 5 = 4-5Gbps 54 6 = 5-6Gbps 55 7 = 6-16Gbps (3rd tuple default)
|
H A D | mediatek,hdmi-phy.yaml | 56 TX DRV bias current for < 1.65Gbps 64 TX DRV bias current for >= 1.65Gbps
|
/openbmc/linux/Documentation/scsi/ |
H A D | bfa.rst | 16 1657:0013:1657:0014 425 4Gbps dual port FC HBA 17 1657:0013:1657:0014 825 8Gbps PCIe dual port FC HBA 18 1657:0013:103c:1742 HP 82B 8Gbps PCIedual port FC HBA 19 1657:0013:103c:1744 HP 42B 4Gbps dual port FC HBA 20 1657:0017:1657:0014 415 4Gbps single port FC HBA 21 1657:0017:1657:0014 815 8Gbps single port FC HBA 22 1657:0017:103c:1741 HP 41B 4Gbps single port FC HBA 23 1657:0017:103c 1743 HP 81B 8Gbps single port FC HBA 24 1657:0021:103c:1779 804 8Gbps FC HBA for HP Bladesystem c-class 26 1657:0014:1657:0014 1010 10Gbps single port CNA - FCOE [all …]
|
/openbmc/u-boot/drivers/phy/marvell/ |
H A D | comphy_core.c | 23 "1.25 Gbps", "1.5 Gbps", "2.5 Gbps", in get_speed_string() 24 "3.0 Gbps", "3.125 Gbps", "5 Gbps", "6 Gbps", in get_speed_string() 25 "6.25 Gbps", "10.31 Gbps" in get_speed_string()
|
/openbmc/linux/drivers/scsi/mvsas/ |
H A D | mv_94xx.h | 180 * bit 2: 6Gbps support 181 * bit 1: 3Gbps support 182 * bit 0: 1.5Gbps support 188 * bit 5: G1 (1.5Gbps) Without SSC 189 * bit 4: G1 (1.5Gbps) with SSC 190 * bit 3: G2 (3.0Gbps) Without SSC 191 * bit 2: G2 (3.0Gbps) with SSC 192 * bit 1: G3 (6.0Gbps) without SSC 193 * bit 0: G3 (6.0Gbps) with SSC 196 /* 8h: 1.5Gbps 9h: 3Gbps Ah: 6Gbps */
|
/openbmc/u-boot/arch/arm/cpu/armv8/fsl-layerscape/doc/ |
H A D | README.soc | 101 - Cryptography acceleration (SEC) at up to 10 Gbps 102 - RegEx pattern matching acceleration (PME) at up to 10 Gbps 103 - Decompression/compression acceleration (DCE) at up to 20 Gbps 104 - Accelerated I/O processing (AIOP) at up to 20 Gbps 108 - Up to eight 10 Gbps Ethernet MACs 109 - Up to eight 1 / 2.5 Gbps Ethernet MACs 228 - Cryptography acceleration (SEC) at up to 10 Gbps 229 - RegEx pattern matching acceleration (PME) at up to 10 Gbps 230 - Decompression/compression acceleration (DCE) at up to 20 Gbps 231 - Accelerated I/O processing (AIOP) at up to 20 Gbps [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/media/i2c/ |
H A D | maxim,max96712.yaml | 21 Each GMSL2 serial link operates at a fixed rate of 3Gbps or 6Gbps in the 23 MAX96712 can be paired with first-generation 3.12Gbps or 1.5Gbps GMSL1 24 serializers or operate up to 3.12Gbps with GMSL2 serializers in GMSL1 mode.
|
/openbmc/linux/drivers/scsi/bfa/ |
H A D | bfad_attr.c | 747 "QLogic BR-series 4Gbps PCIe dual port FC HBA"); in bfad_im_model_desc_show() 750 "QLogic BR-series 8Gbps PCIe dual port FC HBA"); in bfad_im_model_desc_show() 753 "QLogic BR-series 4Gbps PCIe dual port FC HBA for HP"); in bfad_im_model_desc_show() 756 "QLogic BR-series 8Gbps PCIe dual port FC HBA for HP"); in bfad_im_model_desc_show() 759 "QLogic BR-series 10Gbps single port CNA"); in bfad_im_model_desc_show() 762 "QLogic BR-series 10Gbps dual port CNA"); in bfad_im_model_desc_show() 765 "QLogic BR-series 10Gbps CNA for IBM Blade Center"); in bfad_im_model_desc_show() 768 "QLogic BR-series 4Gbps PCIe single port FC HBA"); in bfad_im_model_desc_show() 771 "QLogic BR-series 8Gbps PCIe single port FC HBA"); in bfad_im_model_desc_show() 774 "QLogic BR-series 4Gbps PCIe single port FC HBA for HP"); in bfad_im_model_desc_show() [all …]
|
/openbmc/linux/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/ |
H A D | smu11_driver_if_arcturus.h | 429 XGMI_LINK_RATE_2 = 2, // 2Gbps 430 XGMI_LINK_RATE_4 = 4, // 4Gbps 431 XGMI_LINK_RATE_8 = 8, // 8Gbps 432 XGMI_LINK_RATE_12 = 12, // 12Gbps 433 XGMI_LINK_RATE_16 = 16, // 16Gbps 434 XGMI_LINK_RATE_17 = 17, // 17Gbps 435 XGMI_LINK_RATE_18 = 18, // 18Gbps 436 XGMI_LINK_RATE_19 = 19, // 19Gbps 437 XGMI_LINK_RATE_20 = 20, // 20Gbps 438 XGMI_LINK_RATE_21 = 21, // 21Gbps [all …]
|
H A D | smu11_driver_if_sienna_cichlid.h | 524 XGMI_LINK_RATE_2 = 2, // 2Gbps 525 XGMI_LINK_RATE_4 = 4, // 4Gbps 526 XGMI_LINK_RATE_8 = 8, // 8Gbps 527 XGMI_LINK_RATE_12 = 12, // 12Gbps 528 XGMI_LINK_RATE_16 = 16, // 16Gbps 529 XGMI_LINK_RATE_17 = 17, // 17Gbps 530 XGMI_LINK_RATE_18 = 18, // 18Gbps 531 XGMI_LINK_RATE_19 = 19, // 19Gbps 532 XGMI_LINK_RATE_20 = 20, // 20Gbps 533 XGMI_LINK_RATE_21 = 21, // 21Gbps [all …]
|
/openbmc/u-boot/drivers/video/meson/ |
H A D | meson_dw_hdmi.c | 224 /* 5.94Gbps, 3.7125Gbps */ in meson_dw_hdmi_phy_setup_mode() 228 /* 2.97Gbps */ in meson_dw_hdmi_phy_setup_mode() 232 /* 1.485Gbps */ in meson_dw_hdmi_phy_setup_mode() 242 /* 5.94Gbps, 3.7125Gbps */ in meson_dw_hdmi_phy_setup_mode() 246 /* 2.97Gbps */ in meson_dw_hdmi_phy_setup_mode() 250 /* 1.485Gbps, and below */ in meson_dw_hdmi_phy_setup_mode()
|
/openbmc/linux/drivers/net/ethernet/ezchip/ |
H A D | nps_enet.h | 59 /* Gbps Eth MAC Configuration 0 register masks and shifts */ 93 /* Gbps Eth MAC Configuration 1 register masks and shifts */ 103 /* Gbps Eth MAC Configuration 2 register masks and shifts */ 119 /* Gbps Eth MAC Configuration 3 register masks and shifts */
|
/openbmc/linux/drivers/scsi/be2iscsi/ |
H A D | Kconfig | 3 tristate "Emulex 10Gbps iSCSI - BladeEngine 2" 11 10Gbps Storage adapter - BladeEngine 2.
|
/openbmc/u-boot/board/freescale/t208xqds/ |
H A D | README | 19 - Up to four 10 Gbps Ethernet MACs 20 - Up to eight 1 Gbps Ethernet MACs 21 - Up to four 2.5 Gbps Ethernet MACs 57 - Two 1Gbps RGMII on-board ports 58 - Four 10Gbps XFI on-board cages 59 - 1Gbps/2.5Gbps SGMII Riser card 60 - 10Gbps XAUI Riser card
|
/openbmc/linux/drivers/gpu/drm/meson/ |
H A D | meson_dw_hdmi.c | 305 /* 5.94Gbps, 3.7125Gbps */ in meson_hdmi_phy_setup_mode() 309 /* 2.97Gbps */ in meson_hdmi_phy_setup_mode() 313 /* 1.485Gbps */ in meson_hdmi_phy_setup_mode() 324 /* 5.94Gbps, 3.7125Gbps */ in meson_hdmi_phy_setup_mode() 328 /* 2.97Gbps */ in meson_hdmi_phy_setup_mode() 332 /* 1.485Gbps, and below */ in meson_hdmi_phy_setup_mode() 339 /* 5.94Gbps, 3.7125Gbps */ in meson_hdmi_phy_setup_mode() 344 /* 2.97Gbps */ in meson_hdmi_phy_setup_mode() 349 /* 1.485Gbps, and below */ in meson_hdmi_phy_setup_mode()
|
/openbmc/linux/drivers/net/phy/ |
H A D | phy-core.c | 27 return "1Gbps"; in phy_speed_to_str() 29 return "2.5Gbps"; in phy_speed_to_str() 31 return "5Gbps"; in phy_speed_to_str() 33 return "10Gbps"; in phy_speed_to_str() 35 return "14Gbps"; in phy_speed_to_str() 37 return "20Gbps"; in phy_speed_to_str() 39 return "25Gbps"; in phy_speed_to_str() 41 return "40Gbps"; in phy_speed_to_str() 43 return "50Gbps"; in phy_speed_to_str() 45 return "56Gbps"; in phy_speed_to_str() [all …]
|
/openbmc/linux/drivers/gpu/drm/amd/display/dc/ |
H A D | dc_dp_types.h | 50 LINK_RATE_LOW = 0x06, // Rate_1 (RBR) - 1.62 Gbps/Lane 51 LINK_RATE_RATE_2 = 0x08, // Rate_2 - 2.16 Gbps/Lane 52 LINK_RATE_RATE_3 = 0x09, // Rate_3 - 2.43 Gbps/Lane 53 LINK_RATE_HIGH = 0x0A, // Rate_4 (HBR) - 2.70 Gbps/Lane 54 LINK_RATE_RBR2 = 0x0C, // Rate_5 (RBR2) - 3.24 Gbps/Lane 55 LINK_RATE_RATE_6 = 0x10, // Rate_6 - 4.32 Gbps/Lane 56 LINK_RATE_HIGH2 = 0x14, // Rate_7 (HBR2) - 5.40 Gbps/Lane 57 LINK_RATE_RATE_8 = 0x19, // Rate_8 - 6.75 Gbps/Lane 58 LINK_RATE_HIGH3 = 0x1E, // Rate_9 (HBR3) - 8.10 Gbps/Lane 62 LINK_RATE_UHBR10 = 1000, // UHBR10 - 10.0 Gbps/Lane [all …]
|
/openbmc/linux/drivers/net/ethernet/emulex/benet/ |
H A D | Kconfig | 3 tristate "ServerEngines' 10Gbps NIC - BladeEngine" 7 10Gbps network adapter - BladeEngine.
|
/openbmc/linux/tools/testing/selftests/drivers/net/mlxsw/ |
H A D | qos_lib.sh | 29 # 1Gbps. That wouldn't saturate egress and MC would thus get through, 30 # seemingly winning bandwidth on account of UC. Demand at least 2Gbps
|
H A D | qos_mc_aware.sh | 39 # | >1Gbps | | >1Gbps | 48 # | | 1Gbps bottleneck | 267 # degradation on 1Gbps link.
|
H A D | sch_red_core.sh | 3 # This test sends a >1Gbps stream of traffic from H1, to the switch, which 4 # forwards it to a 1Gbps port. This 1Gbps stream is then looped back to the 5 # switch and forwarded to the port under test $swp3, which is also 1Gbps. 35 # | >1Gbps | 60 # | | | 1Gbps 138 # 1Gbps.
|
/openbmc/linux/fs/smb/client/ |
H A D | cifs_debug.c | 180 return "1Gbps"; in smb_speed_to_str() 182 return "2.5Gbps"; in smb_speed_to_str() 184 return "5Gbps"; in smb_speed_to_str() 186 return "10Gbps"; in smb_speed_to_str() 188 return "14Gbps"; in smb_speed_to_str() 190 return "20Gbps"; in smb_speed_to_str() 192 return "25Gbps"; in smb_speed_to_str() 194 return "40Gbps"; in smb_speed_to_str() 196 return "50Gbps"; in smb_speed_to_str() 198 return "56Gbps"; in smb_speed_to_str() [all …]
|
/openbmc/linux/Documentation/networking/ |
H A D | dctcp.rst | 19 switches is 20 packets (30KB) at 1Gbps, and 65 packets (~100KB) at 10Gbps,
|
/openbmc/u-boot/board/freescale/t208xrdb/ |
H A D | README | 19 - Up to four 10 Gbps Ethernet MACs 20 - Up to eight 1 Gbps Ethernet MACs 21 - Up to four 2.5 Gbps Ethernet MACs 60 - Two on-board 10Gbps XFI fiber ports 61 - Two on-board 10Gbps Base-T copper ports
|