| /openbmc/linux/arch/arm64/boot/dts/qcom/ |
| H A D | msm8996pro-xiaomi-natrium.dts | 205 "KEYPAD_LED_EN_A", /* GPIO_7 */
243 "NC", /* GPIO_7 */
258 "NFC_I2C_SCL", /* GPIO_7 */
|
| H A D | msm8996-xiaomi-gemini.dts | 243 "KEYPAD_LED_EN", /* GPIO_7 */
288 "NC", /* GPIO_7 */
303 "NFC_I2C_SCL", /* GPIO_7 */
|
| H A D | msm8996pro-xiaomi-scorpio.dts | 266 "KEYPAD_LED_EN_A", /* GPIO_7 */
313 "NC", /* GPIO_7 */
328 "NFC_I2C_SCL", /* GPIO_7 */
|
| H A D | apq8016-sbc.dts | 455 "[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */
|
| /openbmc/linux/Documentation/devicetree/bindings/pinctrl/ |
| H A D | mscc,ocelot-pinctrl.yaml | 106 pins = "GPIO_6", "GPIO_7";
|
| H A D | pinctrl-palmas.txt | 44 then the GPIO_7 field should never be muxed to anything else.
|
| H A D | mediatek,mt7622-pinctrl.yaml | 293 GPIO_6, GPIO_7, GPIO_8, UART0_TXD, UART0_RXD, TOP_2G_CLK,
|
| H A D | mediatek,mt7986-pinctrl.yaml | 274 GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5, GPIO_6, GPIO_7,
|
| /openbmc/linux/arch/mips/boot/dts/mscc/ |
| H A D | serval_common.dtsi | 82 pins = "GPIO_7"; /* No "default" scl for i2c0 */
|
| H A D | serval.dtsi | 110 pins = "GPIO_6", "GPIO_7";
|
| H A D | ocelot.dtsi | 220 pins = "GPIO_6", "GPIO_7";
|
| /openbmc/u-boot/arch/mips/dts/ |
| H A D | mscc,servalt.dtsi | 118 pins = "GPIO_6", "GPIO_7";
|
| H A D | mscc,ocelot.dtsi | 225 pins = "GPIO_6", "GPIO_7";
|
| /openbmc/linux/drivers/media/usb/em28xx/ |
| H A D | em28xx-cards.c | 320 * GPIO_7 - LED
325 {EM2874_R80_GPIO_P0_CTRL, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */
355 * GPIO_7 - LED (green LED)
421 * GPIO_7 - LED, 0=active
426 {EM2874_R80_GPIO_P0_CTRL, 0x43, 0xff, 000}, /* GPIO_7 = 0 */
435 * GPIO_7: LED, 1=active
449 * GPIO_7: LED, 1=active
455 {EM2874_R80_GPIO_P0_CTRL, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */
467 * GPIO_7: snapshot button, 0=pressed, 1=unpressed
|
| /openbmc/linux/arch/arm64/boot/dts/actions/ |
| H A D | s900-bubblegum-96.dts | 101 "GPIO-H", /* GPIO_7, LSEC pin 30 */
|
| /openbmc/u-boot/board/isee/igep00x0/ |
| H A D | igep00x0.h | 119 MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /* GPIO_7 */\
|
| /openbmc/u-boot/arch/arm/dts/ |
| H A D | logicpd-torpedo-baseboard.dtsi | 294 OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot5.gpio_7 */
|
| H A D | omap3-beagle.dts | 175 OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
|
| /openbmc/linux/arch/arm/boot/dts/ti/omap/ |
| H A D | omap3-beagle.dts | 175 OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
|
| H A D | logicpd-torpedo-baseboard.dtsi | 319 OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot5.gpio_7 */
|
| /openbmc/linux/drivers/pinctrl/intel/ |
| H A D | pinctrl-broxton.c | 35 PINCTRL_PIN(7, "GPIO_7"),
534 PINCTRL_PIN(7, "GPIO_7"),
|
| /openbmc/u-boot/drivers/pinctrl/mediatek/ |
| H A D | pinctrl-mt7629.c | 156 MT7629_PIN(60, "GPIO_7"),
|
| /openbmc/u-boot/board/compulab/cm_t3517/ |
| H A D | mux.c | 234 MUX_VAL(CP(SYS_BOOT5), (IEN | PTU | DIS | M4)); /*GPIO_7*/ in set_muxconf_regs()
|
| /openbmc/linux/drivers/media/pci/cx23885/ |
| H A D | cx23885.h | 113 #define GPIO_7 0x00000080 macro
|
| /openbmc/linux/include/linux/mfd/ |
| H A D | idt8a340_reg.h | 290 #define GPIO_7 0xc948 macro
|