| /openbmc/linux/Documentation/devicetree/bindings/sound/ |
| H A D | cs35l35.txt | 5 - compatible : "cirrus,cs35l35"
17 - cirrus,boost-ind-nanohenry: Inductor value for boost converter. The value is
23 - cirrus,stereo-config : Boolean to determine if there are 2 AMPs for a
26 - cirrus,audio-channel : Set Location of Audio Signal on Serial Port
30 - cirrus,advisory-channel : Set Location of Advisory Signal on Serial Port
34 - cirrus,shared-boost : Boolean to enable ClassH tracking of Advisory Signal
37 - cirrus,external-boost : Boolean to specify the device is using an external
41 - cirrus,sp-drv-strength : Value for setting the Serial Port drive strength
45 - cirrus,sp-drv-unused : Determines how unused slots should be driven on the
51 - cirrus,bst-pdn-fet-on : Boolean to determine if the Boost PDN control
[all …]
|
| H A D | cs35l36.txt | 5 - compatible : "cirrus,cs35l36"
13 - cirrus,boost-ctl-millivolt : Boost Voltage Value. Configures the boost
18 - cirrus,boost-peak-milliamp : Boost-converter peak current limit in mA.
24 - cirrus,boost-ind-nanohenry : Inductor estimation LBST reference value.
32 - cirrus,multi-amp-mode : Boolean to determine if there are more than
36 - cirrus,boost-ctl-select : Boost converter control source selection.
43 - cirrus,amp-pcm-inv : Boolean to determine Amplifier will invert incoming
46 - cirrus,imon-pol-inv : Boolean to determine Amplifier will invert the
49 - cirrus,vmon-pol-inv : Boolean to determine Amplifier will invert the
52 - cirrus,dcm-mode-enable : Boost converter automatic DCM Mode enable.
[all …]
|
| H A D | cs35l33.txt | 5 - compatible : "cirrus,cs35l33"
21 - cirrus,boost-ctl : Booster voltage use to supply the amp. If the value is
26 - cirrus,ramp-rate : On power up, it affects the time from when the power
34 - cirrus,boost-ipk : The maximum current allowed for the boost converter.
38 - cirrus,imon-adc-scale : Configures the scaling of data bits from the IMON
45 The cs35l33 node can have a single "cirrus,hg-algo" sub-node that will enable
48 - cirrus,hg-algo : Sub-node for internal Class H/G algorithm that
51 Optional properties for the "cirrus,hg-algo" sub-node:
53 - cirrus,mem-depth : Memory depth for the Class H/G algorithm measured in
57 cirrus,release-rate : The number of consecutive LRCLK periods before
[all …]
|
| H A D | cirrus,cs35l41.yaml | 4 $id: http://devicetree.org/schemas/sound/cirrus,cs35l41.yaml#
7 title: Cirrus Logic CS35L41 Speaker Amplifier
10 - david.rhodes@cirrus.com
19 - cirrus,cs35l40
20 - cirrus,cs35l41
42 cirrus,boost-peak-milliamp:
53 cirrus,boost-ind-nanohenry:
61 cirrus,boost-cap-microfarad:
68 cirrus,asp-sdout-hiz:
81 cirrus,boost-type:
[all …]
|
| H A D | cs43130.txt | 5 - compatible : "cirrus,cs43130", "cirrus,cs4399", "cirrus,cs43131",
6 "cirrus,cs43198"
19 - cirrus,xtal-ibias:
28 - cirrus,dc-measure:
31 - cirrus,ac-measure:
35 - cirrus,dc-threshold:
39 - cirrus,ac-freq:
41 Only used if "cirrus,dc-measure" is defined.
52 compatible = "cirrus,cs43130";
60 cirrus,xtal-ibias = <2>;
[all …]
|
| H A D | cirrus,cs42l42.yaml | 4 $id: http://devicetree.org/schemas/sound/cirrus,cs42l42.yaml#
7 title: Cirrus Logic CS42L42 audio CODEC
10 - patches@opensource.cirrus.com
21 - cirrus,cs42l42
22 - cirrus,cs42l83
60 cirrus,ts-inv:
75 cirrus,ts-dbnc-rise:
94 cirrus,ts-dbnc-fall:
113 cirrus,btn-det-init-dbnce:
127 cirrus,btn-det-event-dbnce:
[all …]
|
| H A D | cirrus,cs42l43.yaml | 4 $id: http://devicetree.org/schemas/sound/cirrus,cs42l43.yaml#
7 title: Cirrus Logic CS42L43 Audio CODEC
10 - patches@opensource.cirrus.com
26 - cirrus,cs42l43
76 cirrus,bias-low:
81 cirrus,bias-sense-microamp:
88 cirrus,bias-ramp-ms:
95 cirrus,detect-us:
102 cirrus,button-automute:
108 cirrus,buttons-ohms:
[all …]
|
| H A D | cs42l56.txt | 5 - compatible : "cirrus,cs42l56"
14 - cirrus,gpio-nreset : GPIO controller's phandle and the number
17 - cirrus,chgfreq-divisor : Values used to set the Charge Pump Frequency.
24 - cirrus,ain1a-ref-cfg, ain1b-ref-cfg : boolean, If present, AIN1A or AIN1B are configured
27 - cirrus,ain2a-ref-cfg, ain2b-ref-cfg : boolean, If present, AIN2A or AIN2B are configured
30 - cirrus,micbias-lvl: Set the output voltage level on the MICBIAS Pin.
38 - cirrus,adaptive-pwr-cfg : Configures how the power to the Headphone and Lineout
45 …- cirrus,hpf-left-freq, hpf-right-freq : Sets the corner frequency (-3dB point) for the internal H…
56 compatible = "cirrus,cs42l56";
58 cirrus,gpio-nreset = <&gpio 10 0>;
[all …]
|
| H A D | cs42l52.txt | 5 - compatible : "cirrus,cs42l52"
11 - cirrus,reset-gpio : GPIO controller's phandle and the number
14 - cirrus,chgfreq-divisor : Values used to set the Charge Pump Frequency.
21 - cirrus,mica-differential-cfg : boolean, If present, then the MICA input is configured
25 - cirrus,micb-differential-cfg : boolean, If present, then the MICB input is configured
29 - cirrus,micbias-lvl: Set the output voltage level on the MICBIAS Pin
40 compatible = "cirrus,cs42l52";
43 cirrus,chgfreq-divisor = <0x05>;
44 cirrus.mica-differential-cfg;
45 cirrus,micbias-lvl = <5>;
|
| H A D | cs35l34.txt | 5 - compatible : "cirrus,cs35l34"
13 - cirrus,boost-vtge-millivolt : Boost Voltage Value. Configures the boost
17 - cirrus,boost-nanohenry: Inductor value for boost converter. The value is
28 - cirrus,boost-peak-milliamp : Boost converter peak current limit in mA. The
32 - cirrus,i2s-sdinloc : ADSP SDIN I2S channel location. Indicates whether the
41 - cirrus,gain-zc-disable: Boolean property. If set, the gain change will take
44 - cirrus,tdm-rising-edge: Boolean property. If set, data is on the rising edge of
51 compatible = "cirrus,cs35l34";
59 cirrus,boost-vtge-milltvolt = <8000>; /* 8V */
60 cirrus,boost-ind-nanohenry = <1000>; /* 1uH */
[all …]
|
| H A D | cirrus,cs35l45.yaml | 4 $id: http://devicetree.org/schemas/sound/cirrus,cs35l45.yaml#
7 title: Cirrus Logic CS35L45 Speaker Amplifier
10 - Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
11 - Richard Fitzgerald <rf@opensource.cirrus.com>
23 - cirrus,cs35l45
43 cirrus,asp-sdout-hiz-ctrl:
54 "^cirrus,gpio-ctrl[1-3]$":
137 compatible = "cirrus,cs35l45";
143 cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED |
145 cirrus,gpio-ctrl1 {
[all …]
|
| H A D | cs35l32.txt | 5 - compatible : "cirrus,cs35l32"
18 - cirrus,boost-manager : Boost voltage control.
27 - cirrus,sdout-datacfg : Data configuration for dual CS35L32 applications only.
34 - cirrus,sdout-share : SDOUT sharing. Determines whether one or two CS35L32
39 - cirrus,battery-recovery : Low battery nominal recovery threshold, rising VP.
45 - cirrus,battery-threshold : Low battery nominal threshold, falling VP.
56 compatible = "cirrus,cs35l32";
59 cirrus,boost-manager = <0x03>;
60 cirrus,sdout-datacfg = <0x02>;
|
| H A D | cirrus,madera.yaml | 4 $id: http://devicetree.org/schemas/sound/cirrus,madera.yaml#
7 title: Cirrus Logic Madera class audio CODECs
10 - patches@opensource.cirrus.com
17 Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
34 cirrus,inmode:
54 cirrus,out-mono:
66 cirrus,dmic-ref:
86 cirrus,max-channels-clocked:
98 cirrus,pdm-fmt:
108 cirrus,pdm-mute:
|
| H A D | cirrus,lochnagar.yaml | 4 $id: http://devicetree.org/schemas/sound/cirrus,lochnagar.yaml#
7 title: Cirrus Logic Lochnagar Audio Development Board
10 - patches@opensource.cirrus.com
13 Lochnagar is an evaluation and development board for Cirrus Logic
14 Smart CODEC and Amp devices. It allows the connection of most Cirrus
25 [1] ../mfd/cirrus,lochnagar.yaml
33 - cirrus,lochnagar2-soundcard
|
| /openbmc/linux/drivers/gpu/drm/tiny/ |
| H A D | cirrus.c | 14 * drivers/video/cirrusfb.c - driver for Cirrus Logic chipsets
23 #include <video/cirrus.h>
48 #define DRIVER_NAME "cirrus"
49 #define DRIVER_DESC "qemu cirrus vga"
100 static u8 rreg_seq(struct cirrus_device *cirrus, u8 reg) in rreg_seq() argument
102 iowrite8(reg, cirrus->mmio + SEQ_INDEX); in rreg_seq()
103 return ioread8(cirrus->mmio + SEQ_DATA); in rreg_seq()
106 static void wreg_seq(struct cirrus_device *cirrus, u8 reg, u8 val) in wreg_seq() argument
108 iowrite8(reg, cirrus->mmio + SEQ_INDEX); in wreg_seq()
109 iowrite8(val, cirrus->mmio + SEQ_DATA); in wreg_seq()
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/mfd/ |
| H A D | cirrus,madera.yaml | 4 $id: http://devicetree.org/schemas/mfd/cirrus,madera.yaml#
7 title: Cirrus Logic Madera class audio CODECs Multi-Functional Device
10 - patches@opensource.cirrus.com
18 bindings/pinctrl/cirrus,madera.yaml
20 bindings/sound/cirrus,madera.yaml
23 - $ref: /schemas/pinctrl/cirrus,madera.yaml#
25 - $ref: /schemas/sound/cirrus,madera.yaml#
31 - cirrus,cs47l85
54 - cirrus,cs47l15
55 - cirrus,cs47l35
[all …]
|
| H A D | cirrus,lochnagar.yaml | 4 $id: http://devicetree.org/schemas/mfd/cirrus,lochnagar.yaml#
7 title: Cirrus Logic Lochnagar Audio Development Board
10 - patches@opensource.cirrus.com
13 Lochnagar is an evaluation and development board for Cirrus Logic
14 Smart CODEC and Amp devices. It allows the connection of most Cirrus
29 [4] Clock: ../clock/cirrus,lochnagar.yaml
30 [5] Pinctrl: ../pinctrl/cirrus,lochnagar.yaml
31 [6] Sound: ../sound/cirrus,lochnagar.yaml
32 [7] Hardware Monitor: ../hwmon/cirrus,lochnagar.yaml
39 - cirrus,lochnagar2
[all …]
|
| /openbmc/qemu/.gitlab-ci.d/cirrus/ |
| H A D | README.rst | 1 Cirrus CI integration
8 To work around this limitation, we take advantage of `Cirrus CI`_'s free
9 offering: more specifically, we use the `cirrus-run`_ script to trigger Cirrus
10 CI jobs from GitLab CI jobs so that Cirrus CI job output is integrated into
17 This repository needs to exist for cirrus-run to work, but it doesn't need to
20 * enable the `Cirrus CI GitHub app`_ for your GitHub account;
22 * sign up for Cirrus CI. It's enough to log into the website using your GitHub
25 * grab an API token from the `Cirrus CI settings`_ page;
27 * it may be necessary to push an empty ``.cirrus.yml`` file to your github fork
28 for Cirrus CI to properly recognize the project. You can check whether
[all …]
|
| /openbmc/linux/arch/arm/mach-ep93xx/ |
| H A D | Kconfig | 14 This enables support for the Cirrus EP93xx series of CPUs.
18 menu "Cirrus EP93xx Implementation Options"
39 bool "Support Cirrus Logic EDB9301"
42 Say 'Y' here if you want your kernel to support the Cirrus
46 bool "Support Cirrus Logic EDB9302"
49 Say 'Y' here if you want your kernel to support the Cirrus
53 bool "Support Cirrus Logic EDB9302A"
56 Say 'Y' here if you want your kernel to support the Cirrus
60 bool "Support Cirrus Logic EDB9307"
63 Say 'Y' here if you want your kernel to support the Cirrus
[all …]
|
| /openbmc/linux/arch/arm/boot/dts/cirrus/ |
| H A D | ep7209.dtsi | 10 model = "Cirrus Logic EP7209";
11 compatible = "cirrus,ep7209";
46 compatible = "cirrus,ep7209-clk";
52 compatible = "cirrus,ep7209-intc";
59 compatible = "cirrus,ep7209-gpio";
66 compatible = "cirrus,ep7209-gpio";
73 compatible = "cirrus,ep7209-gpio";
80 compatible = "cirrus,ep7209-gpio";
87 compatible = "cirrus,ep7209-syscon1", "syscon";
94 compatible = "cirrus,ep7209-bus", "simple-bus";
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/gpio/ |
| H A D | gpio-ep9301.yaml | 17 - const: cirrus,ep9301-gpio
20 - cirrus,ep9302-gpio
21 - cirrus,ep9307-gpio
22 - cirrus,ep9312-gpio
23 - cirrus,ep9315-gpio
24 - const: cirrus,ep9301-gpio
69 compatible = "cirrus,ep9301-gpio";
82 compatible = "cirrus,ep9301-gpio";
95 compatible = "cirrus,ep9301-gpio";
104 compatible = "cirrus,ep9301-gpio";
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/clock/ |
| H A D | cirrus,cs2000-cp.yaml | 4 $id: http://devicetree.org/schemas/clock/cirrus,cs2000-cp.yaml#
7 title: CIRRUS LOGIC Fractional-N Clock Synthesizer & Clock Multiplier
16 Link: https://www.cirrus.com/products/cs2000/
21 - cirrus,cs2000-cp
39 cirrus,aux-output-source:
50 cirrus,clock-skip:
56 cirrus,dynamic-mode:
75 #include <dt-bindings/clock/cirrus,cs2000-cp.h>
84 compatible = "cirrus,cs2000-cp";
88 cirrus,aux-output-source = <CS2000CP_AUX_OUTPUT_CLK_OUT>;
|
| /openbmc/qemu/.gitlab-ci.d/ |
| H A D | cirrus.yml | 1 # Jobs that we delegate to Cirrus CI because they require an operating
5 # The Cirrus CI configuration is generated by replacing target-specific
16 image: registry.gitlab.com/libvirt/libvirt-ci/cirrus-run:latest
18 # 20 mins larger than "timeout_in" in cirrus/build.yml
19 # as there's often a 5-10 minute delay before Cirrus CI
23 - source .gitlab-ci.d/cirrus/$NAME.vars
43 <.gitlab-ci.d/cirrus/build.yml >.gitlab-ci.d/cirrus/$NAME.yml
44 - cat .gitlab-ci.d/cirrus/$NAME.yml
45 - cirrus-run -v --show-build-log always .gitlab-ci.d/cirrus/$NAME.yml
|
| /openbmc/linux/Documentation/devicetree/bindings/hwmon/ |
| H A D | cirrus,lochnagar.yaml | 4 $id: http://devicetree.org/schemas/hwmon/cirrus,lochnagar.yaml#
7 title: Cirrus Logic Lochnagar Audio Development Board
10 - patches@opensource.cirrus.com
13 Lochnagar is an evaluation and development board for Cirrus Logic
14 Smart CODEC and Amp devices. It allows the connection of most Cirrus
25 [1] ../mfd/cirrus,lochnagar.yaml
30 - cirrus,lochnagar2-hwmon
|
| /openbmc/linux/sound/soc/codecs/ |
| H A D | Kconfig | 705 tristate "Cirrus Logic CS35L32 CODEC"
709 tristate "Cirrus Logic CS35L33 CODEC"
713 tristate "Cirrus Logic CS35L34 CODEC"
717 tristate "Cirrus Logic CS35L35 CODEC"
721 tristate "Cirrus Logic CS35L36 CODEC"
731 tristate "Cirrus Logic CS35L41 CODEC (SPI)"
738 tristate "Cirrus Logic CS35L41 CODEC (I2C)"
749 tristate "Cirrus Logic CS35L45 CODEC (SPI)"
755 Enable support for Cirrus Logic CS35L45 smart speaker amplifier
759 tristate "Cirrus Logic CS35L45 CODEC (I2C)"
[all …]
|